- 17 Mar, 2014 2 commits
-
-
Olof Johansson authored
Merge tag 'renesas-dt4-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Fourth Round of Renesas ARM Based SoC DT Updates for v3.15" from Simon Horman: * r8a7791 (R-Car M2) based koelsch board - Add SDHI devices - Add ethernet * r8a7791 (R-Car M2) SoC - Correct clock index for i2c5 * r8a7790 (R-Car H2) based lager board - Add ethernet * tag 'renesas-dt4-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Add SDHI devices for Koelsch DTS ARM: shmobile: Add SDHI devices to r8a7791 DTSI ARM: shmobile: r8a7791: fix clock index for i2c5 ARM: shmobile: koelsch: add Ether DT support ARM: shmobile: r8a7791: add Ether DT support ARM: shmobile: lager: add Ether DT support ARM: shmobile: r8a7790: add Ether DT support Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-dt3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.15" from Simon Horman: * r7s72100 SoC (RZ/A1H) - Add nodes for i2c controllers to DT * r7s72100 (RZ/A1H) based Genmai board - genmai: adapt dts to use native i2c driver * r8a7791 SoC (R-Car M2) - Remove superfluous interrupt-parents * r8a7791 (R-Car M2) based Koelsch board - Add i2c2 bus to DT - Add DU device to DT * r8a7790 SoC (R-Car H2) - Add i2c aliases - Remove superfluous interrupt-parents - Add QSPI node * r8a7790 SoC (R-Car M2) based Lager - Add DU, SDHI0/1 and QSPI to DT * r8a7778 SoC (R-Car M1) - Remove duplicate i2c nodes * tag 'renesas-dt3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: genmai: adapt dts to use native i2c driver ARM: shmobile: r7s72100: add nodes for i2c controllers to dtsi ARM: shmobile: r8a7791: add i2c2 bus to koelsch dt ARM: shmobile: r8a7791: add i2c master nodes to dtsi ARM: shmobile: r8a7790: add i2c aliases to dtsi ARM: shmobile: r8a7790: remove superfluous interrupt-parents ARM: shmobile: r8a7791: remove superfluous interrupt-parents ARM: shmobile: koelsch-reference: Add DU device to DTS ARM: shmobile: lager: Add DU device to DTS ARM: shmobile: r8a7778 dtsi: Remove duplicate i2c nodes ARM: shmobile: lager: add SDHI0/2 support on DTS ARM: shmobile: lager dts: Add QSPI nodes ARM: shmobile: r8a7790 dtsi: Add QSPI node Signed-off-by:
-
- 11 Mar, 2014 5 commits
-
-
git://git.xilinx.com/linux-xlnxOlof Johansson authored
Merge "arm: Xilinx Zynq dt patches for v3.15" from Michal Simek: - Define fclk-enable property * tag 'zynq-dt-for-3.15' of git://git.xilinx.com/linux-xlnx: arm: dt: zynq: Add fclk-enable property to clkc node Signed-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v3.15/dt-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap device tree changes for v3.15, part 2" from Tony Lindgren: Part two of omap device tree changes enabling driver features in the dts files. * tag 'omap-for-v3.15/dt-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-evmsk: enable dual_emac mode ARM: dts: DRA7: Add device nodes for ABB ARM: dts: OMAP4: Add device nodes for ABB ARM: dts: OMAP36xx: Add device node for ABB ARM: dts: am43x-epos-evm: add SD card hotplug support ARM: dts: am335x-evm: add SD card hotplug support ARM: dts: am437x gp-evm: add sd card dt nodes ARM: dts: omap5: added dt properties to adapt to the new phy framwork ARM: OMAP2+: Use pdata quirks for wl12xx on the AM335x EV-MSK ARM: dts: Update echi-omap DT binding example usage ARM: dts: Get rid of incompatible ids for hci-omap USB host nodes ARM: OMAP2+: Remove legacy_init_ehci_clk() ARM: dts: Add support for OMAP4 Gumstix DuoVero/Parlor Signed-off-by:
-
Olof Johansson authored
Merge tag 'bcm2835-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/dt Merge "ARM: bcm2835: DT changes for 3.15" from Stephen Warren: A variety of features are added to the bcm2835 device trees: - ARM PMU, for perf_event - DMA controller - I2S controller A few cleanups are applied to the DTs too. * tag 'bcm2835-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi: ARM: bcm2835: fix clock DT node names ARM: bcm2835: node name unit address cleanup ARM: bcm2835: fix DT node sort order ARM: bcm2835: add I2S driver to device tree ARM: bcm2835: add dmaengine driver to device tree ARM: bcm2835: perf_event support for Raspberry-Pi Signed-off-by:
-
git://github.com/broadcom/mach-bcmOlof Johansson authored
Merge "ARM: mach-bcm dt updates for 3.15" from Matt Porter: - add BCM4708 dt support - remove bcm11351-brt - bcm281xx common clock support * tag 'armsoc/for-3.15/dt' of git://github.com/broadcom/mach-bcm: ARM: dts: remove bcm11351-brt.dts ARM: dts: Leave sdio1 as disabled on bcm28155-ap ARM: dts: bcm281xx: define real clocks ARM: BCM5301X: add dts files for BCM4708 SoC Signed-off-by:
-
Olof Johansson authored
Merge tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt Keystone DTS updates for 3.15 from Santosh Shilimkar: - Add watchdog timer, timer64 and gpio device nodes - Add LED device nodes - Fixes for debugss, msmc clock nodes - Add support for Keystone Lamarr and Edision SOC/EVM support - Add NAND and AEMIF device nodes * tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone: add AEMIF/NAND device entry ARM: dts: keystone: add support for k2 Edison SoC and EVM ARM: dts: keystone: add support for K2 Lamarr SoC and EVM ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs ARM: dts: keystone: update for supporting K2L/K2E EVMs ARM: dts: keystone: fix domain id for clkdebugsstrc ARM: dts: keystone: drop msmcsram clock node ARM: dts: k2hk-evm: rename clock node to clocks ARM: dts: k2hk-evm: add leds supports ARM: dts: keystone: add gpio device entry ARM: dts: keystone: add keystone timer entry ARM: dts: keystone: add watchdog entry Signed-off-by:
-
- 09 Mar, 2014 7 commits
-
-
git://git.linaro.org/people/shawnguo/linux-2.6Olof Johansson authored
i.MX device tree changes for 3.15, take 2 from Shawn Guo: - Cleanup and device additions for imx27-phytec-phycard boards - eDMA and audio support for vf610-twr board - Minor updates and fixes for a couple of imx28 and imx5 boards * tag 'imx-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: vf610: i2c: Add eDMA support ARM: dts: imx27-phytec-phycore-som: Add USBOTG node ARM: dts: imx27-phytec-phycore-rdk: Add USBH2 node ARM: dts: i.MX27: Add USB nodes ARM: dts: vf610-twr: Add ADC support ARM: dts: mxs: Fix the RTC compatible prop on M28EVK ARM: dts: vf610-twr: Add simple-card support. ARM: dts: vf610-twr: Enable SGTL5000 codec. ARM: dts: vf610-twr: Enable SAI ALSA SoC DAI device ARM: dts: vf610: Add edma mux Tx and Rx support for SAI node. ARM: dts: vf610: lpuart: Add eDMA support ARM: dts: vf610: Add eDMA node ARM: dts: imx27-phytec-phycore: Add diagnostic PMIC LEDs ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi ARM: dts: i.MX51 babbage: Support diagnostic LED ARM: dts: imx28-tx28: Remove 'enable-active-low' property ARM: dts: mx53: Remove 'enable-active-low' property ARM: dts: imx27-phytec-phycard-s-rdk: Add pinctrl definitions for SDHC2 ARM: dts: imx27-phytec-phycard-s-som: Add NFC node ARM: dts: imx27-phytec-phycard-s-som: Sort entries Signed-off-by:
-
git://git.linaro.org/people/shawnguo/linux-2.6Olof Johansson authored
i.MX6 device tree changes for 3.15, take 2 from Shawn Guo: - Add USB, GPMI and SATA support for imx6q-phytec board - Update imx6sl-evk board support regarding PFUZE100, audio and LED etc. - Minor updates on a few imx6qdl boards * tag 'imx6-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: imx6q-phytec: Added SATA Support ARM: dts: imx6q-phytec: Added GPMI-NAND Support ARM: dts: imx6q-phytec: Added USB_HOST Support ARM: dts: imx6q-phytec: Added USB_OTG Support ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled ARM: dts: imx6qdl-sabreauto: Support debug LED ARM: dts: imx6q: add 852MHz setpoint for CPU freq ARM: dts: imx6qdl-wandboard: use GPIO_6 for FEC interrupt ARM: dts: imx6sl-evk: Add debug LED support ARM: dts: imx6qdl-sabreauto: Add PFUZE100 support ARM: dts: imx6sl-evk: Add audio support ARM: dts: imx6sl-evk: Add PFUZE100 support ARM: dts: imx6qdl-sabresd: correct gpio key's active state Signed-off-by:
-
Olof Johansson authored
Merge tag 'ux500-dt-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt A set of device tree-related cleanups for the ux500 platform from Linus Walleij: - Rename SSP/SPI clocks to the name found in the hardware reference manual. (Also includes a rename in the U300 device tree file.) - Delete dead non-DT code. - Drop now completely unused GPIO definition header file. - Delete all hardcoded IRQ number assignments. This hits MFD a bit so the patch has been ACKed by Lee Jones from the MFD side. * tag 'ux500-dt-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mfd: dbx500/abx500: root out hardcoded IRQ assignments ARM: ux500: drop a chunk of GPIO definitions ARM: ux500: skip GIC CPU and dist address checks ARM: ux500: delete pointless DT config option ARM: u300: switch SSP/SPI clock name to "SSPCLK" ARM: ux500: switch SSP/SPI clock name to "SSPCLK" Signed-off-by:
-
https://github.com/mripard/linuxOlof Johansson authored
Allwinner DT patches for 3.15, take 1 from Maxime Ripard: - Add SPI controllers for all the SoCs - Add various missing aliases - Add USB clocks nodes - Addition of the GMAC support - Introduction of the pcDuino board - A few DT cleanup patches: change of compatibles, * tag 'sunxi-dt-for-3.15' of https://github.com/mripard/linux: (33 commits) ARM: sun6i: dt: Fix mod0 compatible ARM: dts: sun7i: Enable the SPI controllers of the A20-olinuxino-micro ARM: dt: sun7i: Add SPI muxing options ARM: dt: sun5i: Add A13 SPI controller nodes ARM: dt: sun5i: Add A10s SPI controller nodes ARM: dt: sun4i: Add A10 SPI controller nodes ARM: dt: sun7i: Add A20 SPI controller nodes ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators ARM: sunxi: dt: Convert to the new clock compatibles ARM: sun7i: add arch timer node ARM: sun7i: dt: Add bindings for USB clocks ARM: sun5i: dt: Add bindings for USB clocks ARM: sun4i: dt: Add bindings for USB clocks ARM: dts: sun7i: Add ethernet alias for GMAC ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of EMAC ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC ARM: dts: sun7i: cubietruck: Enable the GMAC ARM: dts: sun7i: Add pin muxing options for the GMAC ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'exynos-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Samsung exynos clock related DT updates for v3.15 from Kukjim Kim: - use macros instead of hard coded numbers for clock bindings NOTE: this is based on v3.15-next/dt-samsung * tag 'exynos-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: use macros in clock bindings for exynos5440 ARM: dts: use macros in clock bindings for exynos5420 ARM: dts: use macros in clock bindings for exynos5250 ARM: dts: use macros in clock bindings for exynos4
-
Olof Johansson authored
Merge tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Samsung DT updates for v3.15 from Kukjin Kim: For exynos4412 - update vdd_arm voltage range for odroidx board For exynos5250 - add PMU sysreg node and update watchdog node - re-organize RTC status - add max77686 pmic node for smdk5250 For exynos5420 - add PMU sysreg, i2s, adma and watchdog nodes - re-organize RTC status - add fixed voltage regulators and regulator nodes for smdk5420 - add PMIC, GPIO based wake up key and vmmc-supply support for arndale-octa board * tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add vmmc-supply to MMC on arndale-octa board ARM: dts: Add wake up key to arndale-octa board ARM: dts: Add PMIC support to arndale-octa board ARM: dts: Add fixed voltage regulators to smdk5420 ARM: dts: Add I2S nodes to exynos5420 ARM: dts: Add ADMA node to exynos5420 ARM: dts: Re-organize RTC status for exynos5250 ARM: dts: Re-organize RTC status for exynos5420 ARM: dts: Add regulator entries to smdk5420 ARM: dts: add max77686 pmic node for smdk5250 ARM: dts: update vdd_arm voltage range for exynos4412 based boards ARM: dts: update watchdog device nodes for exynos5250 and exynos5420 ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 Signed-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v3.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt OMAP device tree changes from Tony Lindgren: Device tree related changes for omaps with minor code changes also to platform data quirks that are still needed for some features. * tag 'omap-for-v3.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (60 commits) ARM: dts: omap4+: Add DMM bindings ARM: dts: am43x-gp-evm: Add matrix gpio keys. ARM: dts: am43xx: add support for parallel NAND flash ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt ARM: dts: am335x-evm: NAND: update MTD partition table ARM: OMAP2+: gpmc: update gpmc_hwecc_bch_capable() for new platforms and ECC schemes ARM: dts: omap3-gta04: Add bma180 accelerometer ARM: dts: omap3-gta04: Enable mmc2 for wifi ARM: dts: omap3-gta04: Add basic sound support ARM: dts: omap3-gta04: Add twl4030 charger ARM: dts: omap3-gta04: Add touchscreen properties ARM: dts: omap3-gta04: Add support for magnetometer ARM: dts: am437x-gp-evm: Enable gpio. ARM: dts: am437x-gp-evm: Add pwm backlight support. ARM: dts: am437x-gp-evm: Add gp dts. ARM: dts: am43x-epos-evm: Add SPI data. ARM: dts: am43x-epos-evm: Add I2C2 data. pinctrl: am43xx: dt-bindings: add MUX_MODE8 ARM: dts: am43x-epos-evm: Add pwm backlight support. ARM: dts: am4372: Add pwm-cells property for ecap device. ...
-
- 05 Mar, 2014 9 commits
-
-
Yegor Yefremov authored
EVM board provides two Ethernet ports, this patch sets them into dual_emac mode to provide two independent network interfaces. Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nishanth Menon authored
Add ABB device nodes for DRA7 family of devices. Data is based on DRA7 Technical Reference Manual revision I (Sept 2013) Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
Andrii.Tseglytskyi authored
Add ABB device nodes for OMAP443x family of devices. abb_iva is populated, but disabled as it is not used on current OMAP443x family, but the node is used on OMAP446x family. Data is based on OMAP443x Technical Reference Manual revision AN (April 2013). ABB device nodes for OMAP4460 device Data is based on OMAP4460 Technical Reference Manual revision Z (April 2013) [nm@ti.com: co-developer] Signed-off-by:
Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by:
-
Andrii.Tseglytskyi authored
Add ABB device node for OMAP36xx family of devices. Data is based on OMAP36XX Technical Reference Manual revision AB (Dec 2012). [nm@ti.com: co-developer] Signed-off-by:
-
Balaji T K authored
Add card detect gpio for SD card slot and include dt gpio header. Signed-off-by:
Balaji T K <balajitk@ti.com> Signed-off-by:
-
Balaji T K authored
Add card detect gpio for SD card slot Signed-off-by:
-
Balaji T K authored
enable sd card slot on am437x-gp-evm Signed-off-by:
-
Kishon Vijay Abraham I authored
Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt and Documentation/devicetree/bindings/phy/ti-phy.txt. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Matt Porter authored
The BCM11351 BRT board will never see the light of day. Remove the BRT dts since it is not maintainable. Reviewed-by:
Alex Elder <elder@linaro.org> Reviewed-by:
Christian Daudt <bcm@fixthebug.org> Reviewed-by:
Markus Mayer <markus.mayer@linaro.org> Signed-off-by:
Matt Porter <mporter@linaro.org>
-
- 04 Mar, 2014 7 commits
-
-
Imre Kaloz authored
Enable the WiLink6 connected to mmc2. Signed-off-by: Imre Kaloz <kaloz@openwrt.org Signed-off-by: -
Roger Quadros authored
Remove non-compatible id from examples. CC: Alan Stern <stern@rowland.harvard.edu> CC: Nishant Menon <nm@ti.com> CC: Kevin Hilman <khilman@linaro.org> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Roger Quadros authored
The OMAP EHCI and OHCI controllers are not compatible with drivers other than "ti,ehci-omap" and "ti,ohci-omap3" respectively, so get rid of the incompatible ids. CC: Alan Stern <stern@rowland.harvard.edu> CC: Nishant Menon <nm@ti.com> CC: Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Roger Quadros authored
The necessary clock phandle for the EHCI clock is now provided via device tree so we no longer need this legacy method. Update the omap4-panda and omap5-uevm board DTS to provide the necessary EHCI PHY clock information. Signed-off-by:
-
Florian Vaussard authored
Gumstix DuoVero is an OMAP4430-based Computer On Module. Parlor is one of the available expansion board. Tested features: - GPMC ethernet - HSUSB2 and OTG - Audio out - WiFi and Bluetooth (w2cbw0015 SDIO module) - LED and button Signed-off-by:
Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by:
-
Linus Walleij authored
The DBx500 and ABx500 should be getting their IRQs from the device tree and nowhere else. Get rid of all the static assignments everywhere, delete it from the driver, platform data and the board files in one swift strike. Lots of cross-dependencies in the MFD drivers for PRCMU and AB8500 makes it necessary to strike everywhere at once to eradicate IRQs passed as resources and platform data to the left and right around the platform. Cc: Mark Brown <broonie@kernel.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The Ux500 GPIOs are now assigned dynamically from the device tree. Drop this table of static assignments. Signed-off-by:
-
- 02 Mar, 2014 10 commits
-
-
Tony Lindgren authored
Merge tag 'for_3.15/dts_signed' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.15/dt Add craneboard devices Add more N900 devices Add am43x-epos-evm and am437x-gp-evm devices Add OMAP4 DMM devices Conflicts: arch/arm/boot/dts/am43x-epos-evm.dts arch/arm/boot/dts/dra7.dtsi
-
Archit Taneja authored
Add Dynamic Memory Manager (DMM) bindings for OMAP4 and OMAP5 and DRA7x devices. DMM only requires address and irq information. Add documentation for the DMM bindings. Originally worked on by Andy Gross <andygro@gmail.com> Cc: Andy Gross <andygro@gmail.com> Signed-off-by:
Archit Taneja <archit@ti.com> Signed-off-by:
Benoit Cousson <bcousson@baylibre.com>
-
Sourav Poddar authored
Add gpio keys node for am43x gp evm. Signed-off-by:
Sourav Poddar <sourav.poddar@ti.com> Signed-off-by:
-
Pekon Gupta authored
This patch: - enables GPMC h/w and ELM h/w engine for AM43xx devices (am4372.dtsi) - adds pinmux and DT node for Micron 4K-paged x8 NAND device (MT29F4G08AB) present on following boards: am43x-epos-evm: On this board, NAND Flash control lines are muxed with QSPI, Thus only one of the two can be used at a time. Selection is controlled by: (a) dynamically driving following GPIO pin from software GPMC_A0(GPIO) == 0 NAND is selected (default) GPMC_A0(GPIO) == 1 eMMC is selected Signed-off-by:Pekon Gupta <pekon@ti.com> Signed-off-by:
-
Pekon Gupta authored
This patch updated MTD/NAND DT node binding to replace deprecated bindings as per following commit. commit ac65caf5 ARM: OMAP2+: cleaned-up DT support of various ECC schemes Also Refer: Documentation/devicetree/bindings/mtd/gpmc-nand.txt Reviewed-by:Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Pekon Gupta authored
This patch has following updates, specific to MTD/NAND DT - update MTD NAND partition table to keep compatibility between different boards and mainline u-boot. - prefix 'NAND.' in names of NAND device MTD partitions to differentiate them from other MTD device partitions (like NOR and QSPI) Partition_Name Partition_Size /dev/mtd0 NAND.SPL 1 block-size* /dev/mtd1 NAND.SPL.backup1 1 block-size* /dev/mtd2 NAND.SPL.backup2 1 block-size* /dev/mtd3 NAND.SPL.backup3 1 block-size* /dev/mtd5 NAND.u-boot-spl-os 2 block-size* [for falcon boot] /dev/mtd4 NAND.u-boot 1 MB /dev/mtd6 NAND.u-boot-env 1 block-size* /dev/mtd7 NAND.u-boot-env.backup1 1 block-size* /dev/mtd8 NAND.kernel till 0xA00000 /dev/mtd9 NAND.file-system till end of device * am335x-evm uses NAND device with block-size=128KiB Signed-off-by: -
Pekon Gupta authored
This patch - refactors gpmc_hwecc_bch_capable() - add checks for new platforms like dra7xx, am43xx - add checks for OMAP3 SoC, w.r.t. new ECC schemes spawned in following commit: commit ac65caf5 ARM: OMAP2+: cleaned-up DT support of various ECC schemes Signed-off-by: -
NeilBrown authored
Add node for bma180 driver. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
This requires vaux4. Reset line isn't used yet, so wifi isn't reliable. But it does work once per boot. Signed-off-by:
Marek Belisko <marek@goldelico.com> Signed-off-by:
-
NeilBrown authored
This adds basic sound support for gta04 board. Signed-off-by:
-
