Pull x86 fix from Ingo Molnar:
 "Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not
  turned on by default), which also need STIBP enabled (if available) to
  be '100% safe' on even the shortest speculation windows"

* tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/bugs: Enable STIBP for IBPB mitigated RETBleed

Pull more i2c updates from Wolfram Sang:

 - two driver fixes for issues introduced this cycle

 - one trivial driver improvement regarding ACPI

 - more DTS conversion and additions

 - documentation updates

 - subsystem-wide move from strlcpy to strscpy

* tag 'i2c-for-5.20-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  docs: i2c: i2c-sysfs: fix hyperlinks
  docs: i2c: i2c-sysfs: improve wording
  docs: i2c: instantiating-devices: add syntax coloring to dts and C blocks
  docs: i2c: smbus-protocol: improve DataLow/DataHigh definition
  docs: i2c: i2c-protocol: remove unused legend items
  docs: i2c: i2c-protocol,smbus-protocol: remove nonsense words
  docs: i2c: i2c-protocol: update introductory paragraph
  i2c: move core from strlcpy to strscpy
  i2c: move drivers from strlcpy to strscpy
  i2c: kempld: Support ACPI I2C device declaration
  i2c: mediatek: add i2c compatible for MT8188
  dt-bindings: i2c: update bindings for mt8188 soc
  i2c: microchip-corei2c: fix erroneous late ack send
  dt-bindings: i2c: qcom,i2c-cci: convert to dtschema
  i2c: qcom-geni: Fix GPI DMA buffer sync-back

Pull NTB updates from Jon Mason:
 "Non-Transparent Bridge updates.

  Fix of heap data and clang warnings, support for a new Intel NTB
  device, and NTB EndPoint Function (EPF) support and the various fixes
  for that"

* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
  MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
  NTB: EPF: Tidy up some bounds checks
  NTB: EPF: Fix error code in epf_ntb_bind()
  PCI: endpoint: pci-epf-vntb: reduce several globals to statics
  PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
  PCI: endpoint: Fix Kconfig dependency
  NTB: EPF: set pointer addr to null using NULL rather than 0
  Documentation: PCI: extend subheading underline for "lspci output" section
  Documentation: PCI: Use code-block block for scratchpad registers diagram
  Documentation: PCI: Add specification for the PCI vNTB function device
  PCI: endpoint: Support NTB transfer between RC and EP
  NTB: epf: Allow more flexibility in the memory BAR map method
  PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
  ntb: intel: add GNR support for Intel PCIe gen5 NTB
  NTB: ntb_tool: uninitialized heap data in tool_fn_write()
  ntb: idt: fix clang -Wformat warnings

Pull more xfs updates from Darrick Wong:
 "There's not a lot this time around, just the usual bug fixes and
  corrections for missing error returns.

   - Return error codes from block device flushes to userspace

   - Fix a deadlock between reclaim and mount time quotacheck

   - Fix an unnecessary ENOSPC return when doing COW on a filesystem
     with severe free space fragmentation

   - Fix a miscalculation in the transaction reservation computations
     for file removal operations"

* tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix inode reservation space for removing transaction
  xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork
  xfs: fix intermittent hang during quotacheck
  xfs: check return codes when flushing block devices

Pull more SCSI updates from James Bottomley:
 "Mostly small bug fixes and trivial updates.

  The major new core update is a change to the way device, target and
  host reference counting is done to try to make it more robust (this
  change has soaked for a while to try to winkle out any bugs)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: pm8001: Fix typo 'the the' in comment
  scsi: megaraid_sas: Remove redundant variable cmd_type
  scsi: FlashPoint: Remove redundant variable bm_int_st
  scsi: zfcp: Fix missing auto port scan and thus missing target ports
  scsi: core: Call blk_mq_free_tag_set() earlier
  scsi: core: Simplify LLD module reference counting
  scsi: core: Make sure that hosts outlive targets
  scsi: core: Make sure that targets outlive devices
  scsi: ufs: ufs-pci: Correct check for RESET DSM
  scsi: target: core: De-RCU of se_lun and se_lun acl
  scsi: target: core: Fix race during ACL removal
  scsi: ufs: core: Correct ufshcd_shutdown() flow
  scsi: ufs: core: Increase the maximum data buffer size
  scsi: lpfc: Check the return value of alloc_workqueue()

Pull block fixes from Jens Axboe:

 - NVMe pull request
     - print nvme connect Linux error codes properly (Amit Engel)
     - fix the fc_appid_store return value (Christoph Hellwig)
     - fix a typo in an error message (Christophe JAILLET)
     - add another non-unique identifier quirk (Dennis P. Kliem)
     - check if the queue is allocated before stopping it in nvme-tcp
       (Maurizio Lombardi)
     - restart admin queue if the caller needs to restart queue in
       nvme-fc (Ming Lei)
     - use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
       Xiaoxu)

 - __alloc_disk_node() error handling fix (Rafael)

* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
  block: Do not call blk_put_queue() if gendisk allocation fails
  nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
  nvme-tcp: check if the queue is allocated before stopping it
  nvme-fabrics: Fix a typo in an error message
  nvme-fabrics: parse nvme connect Linux error codes
  nvmet-auth: use kmemdup instead of kmalloc + memcpy
  nvme-fc: fix the fc_appid_store return value
  nvme-fc: restart admin queue if the caller needs to restart queue

Pull io_uring fixes from Jens Axboe:

 - Regression fix for this merge window, fixing a wrong order of
   arguments for io_req_set_res() for passthru (Dylan)

 - Fix for the audit code leaking context memory (Peilin)

 - Ensure that provided buffers are memcg accounted (Pavel)

 - Correctly handle short zero-copy sends (Pavel)

 - Sparse warning fixes for the recvmsg multishot command (Dylan)

 - Error handling fix for passthru (Anuj)

 - Remove randomization of struct kiocb fields, to avoid it growing in
   size if re-arranged in such a fashion that it grows more holes or
   padding (Keith, Linus)

 - Small series improving type safety of the sqe fields (Stefan)

* tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block:
  io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields
  io_uring: make io_kiocb_to_cmd() typesafe
  fs: don't randomize struct kiocb fields
  io_uring: consistently make use of io_notif_to_data()
  io_uring: fix error handling for io_uring_cmd
  io_uring: fix io_recvmsg_prep_multishot sparse warnings
  io_uring/net: send retry for zerocopy
  io_uring: mem-account pbuf buckets
  audit, io_uring, io-wq: Fix memory leak in io_sq_thread() and io_wqe_worker()
  io_uring: pass correct parameters to io_req_set_res

Pull more RISC-V updates from Palmer Dabbelt:
 "There's still a handful of new features in here, but there are a lot
  of fixes/cleanups as well:

   - Support for the Zicbom extension for explicit cache-block
     management, along with the necessary bits to make the non-standard
     cache management ops on the Allwinner D1 function

   - Support for the Zihintpause extension, which codifies a go-slow
     instruction used for cpu_relax()

   - Support for the Sstc extension for supervisor-mode timer/counter
     management

   - Many device tree fixes and cleanups, including a large set for the
     Canaan device trees

   - A handful of fixes and cleanups for the PMU driver"

* tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits)
  dt-bindings: gpio: sifive: add gpio-line-names
  wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
  RISC-V: KVM: Support sstc extension
  RISC-V: Improve SBI definitions
  RISC-V: Move counter info definition to sbi header file
  RISC-V: Fix SBI PMU calls for RV32
  RISC-V: Update user page mapping only once during start
  RISC-V: Fix counter restart during overflow for RV32
  RISC-V: Prefer sstc extension if available
  RISC-V: Enable sstc extension parsing from DT
  RISC-V: Add SSTC extension CSR details
  riscv:uprobe fix SR_SPIE set/clear handling
  dt-bindings: riscv: fix SiFive l2-cache's cache-sets
  riscv: ensure cpu_ops_sbi is declared
  RISC-V: cpu_ops_spinwait.c should include head.h
  RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
  riscv: dts: starfive: correct number of external interrupts
  riscv: dts: sifive unmatched: Add PWM controlled LEDs
  riscv/purgatory: Omit use of bin2c
  riscv/purgatory: hard-code obj-y in Makefile
  ...

Pull devicetree fixes from Rob Herring:

 - Fix schema warnings in qcom,ipq6018-pinctrl and sdhci-msm

 - Convert Qualcomm SPMI PMIC to DT schema

 - Make secure interrupt optional for arm,mhu

 - Fix google,cros-ec-typec binding allowed properties

 - Update a bunch of bouncing email addresses

* tag 'devicetree-fixes-for-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: chrome: google,cros-ec-typec: restrict allowed properties
  dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos
  dt-bindings: Drop Robert Jones
  dt-bindings: Drop Beniamin Bia and Stefan Popa
  dt-bindings: iio: Drop Bogdan Pricop
  dt-bindings: iio: Drop Joachim Eastwood
  dt-bindings: mailbox: arm,mhu: Make secure interrupt optional
  dt-bindings: pinctrl: qcom,ipq6018: Fix example 'gpio-ranges' size
  dt-bindings: Drop DT_MK_SCHEMA_FLAGS conditional selecting schema files
  dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC
  dt-bindings: mmc: sdhci-msm: Fix 'operating-points-v2 was unexpected' issue
  dt-bindings: display: simple-framebuffer: Drop Bartlomiej Zolnierkiewicz

Pull RTC updates from Alexandre Belloni:
 "New drivers:
   - Microchip PolarFire
   - Nuvoton NCT3018Y
   - TI K3 RTC

  Subsystem:
   - Replace flush_scheduled_work() with flush_work()
   - Remove deprecated ida_simple_get()/ida_simple_remove() calls

  Drivers:
   - use simple i2c probe where possible
   - sun6i: add R329 support
   - zynqmp: add calibration support
   - vr41xx: remove unused driver"

* tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
  rtc: spear: set range max
  rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
  rtc: zynqmp: initialize fract_tick
  rtc: Add NCT3018Y real time clock driver
  dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock
  dt-bindings: rtc: nxp,pcf85063: Convert to DT schema
  dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt'
  rtc: rx8025: fix 12/24 hour mode detection on RX-8035
  rtc: cros-ec: Only warn once in .remove() about notifier_chain problems
  rtc: vr41xx: remove driver
  rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler()
  rtc: rv8803: fix missing unlock on error in rv8803_set_time()
  rtc: zynqmp: Add calibration set and get support
  rtc: zynqmp: Updated calibration value
  dt-bindings: rtc: zynqmp: Add clock information
  rtc: sun6i: add support for R329 RTC
  rtc: Directly use ida_alloc()/free()
  rtc: Introduce ti-k3-rtc
  dt-bindings: rtc: Add TI K3 RTC description
  dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section
  ...

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Link: https://lore.kernel.org/r/ffcaf8dc4778db4af673822df60dbda6efdd3065.1660201408.git.metze@samba.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

We need to make sure (at build time) that struct io_cmd_data is not
casted to a structure that's larger.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Link: https://lore.kernel.org/r/c024cdf25ae19fc0319d4180e2298bade8ed17b8.1660201408.git.metze@samba.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

This is a size sensitive structure and randomizing can introduce extra
padding that breaks io_uring's fixed size expectations. There are few
fields here as it is, half of which need a fixed order to optimally
pack, so the randomization isn't providing much.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/io-uring/b6f508ca-b1b2-5f40-7998-e4cff1cf7212@kernel.dk/Signed-off-by: Jens Axboe <axboe@kernel.dk>

The PCI Endpoint NTB drivers are under the NTB umbrella.  Add an entry
there to allow for notification of changes for it.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Describe exactly what properties are allowed in Google Chrome OS EC Type
C port, so the schema can properly validate the DTS.  Existing DTS
defines always connectors with unit addresses, not a sole "connector"
child.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220811062245.4316-1-krzysztof.kozlowski@linaro.org

Emails to Dan Murphy and Ricardo Rivera-Matos bounce ("550 Invalid
recipient").  Andrew Davis agreed to take over the bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Andrew Davis <afd@ti.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-6-krzysztof.kozlowski@linaro.org

Emails to Robert Jones bounce ("550 5.2.1 The email account that you
tried to reach is disabled").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-5-krzysztof.kozlowski@linaro.org

Emails to Beniamin Bia and Stefan Popa bounce ("550 5.1.10
RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address
lookup").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-4-krzysztof.kozlowski@linaro.org

Emails to Bogdan Pricop bounce ("550 5.4.1 Recipient address rejected:
Access denied. AS(201806281)").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-3-krzysztof.kozlowski@linaro.org

Emails to Joachim Eastwood bounce ("552 5.2.2 The email account that you
tried to reach is over quota and inactive.").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-2-krzysztof.kozlowski@linaro.org

Pull sound fixes from Takashi Iwai:
 "Includes a few usual updates for HD- and USB-audio and a trivial
  cleanup patch"

* tag 'sound-fix-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: Fix crash due to jack poll in suspend
  ALSA: hda/cirrus - support for iMac 12,1 model
  ALSA: usb-audio: make read-only array marker static const
  ALSA: hda/realtek: Add a quirk for HP OMEN 15 (8786) mute LED
  ALSA: usb-audio: More comprehensive mixer map for ASUS ROG Zenith II
  ALSA: scarlett2: Add Focusrite Clarett+ 8Pre support
  ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model
  ALSA: ice1712: remove redundant assignment to new
  ALSA: hda/realtek: Add quirk for another Asus K42JZ model

Pull virtio updates from Michael Tsirkin:

 - A huge patchset supporting vq resize using the new vq reset
   capability

 - Features, fixes, and cleanups all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
  vdpa/mlx5: Fix possible uninitialized return value
  vdpa_sim_blk: add support for discard and write-zeroes
  vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
  vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
  vdpa_sim_blk: check if sector is 0 for commands other than read or write
  vdpa_sim: Implement suspend vdpa op
  vhost-vdpa: uAPI to suspend the device
  vhost-vdpa: introduce SUSPEND backend feature bit
  vdpa: Add suspend operation
  virtio-blk: Avoid use-after-free on suspend/resume
  virtio_vdpa: support the arg sizes of find_vqs()
  vhost-vdpa: Call ida_simple_remove() when failed
  vDPA: fix 'cast to restricted le16' warnings in vdpa.c
  vDPA: !FEATURES_OK should not block querying device config space
  vDPA/ifcvf: support userspace to query features and MQ of a management device
  vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
  vhost scsi: Allow user to control num virtqueues
  vhost-scsi: Fix max number of virtqueues
  vdpa/mlx5: Support different address spaces for control and data
  vdpa/mlx5: Implement susupend virtqueue callback
  ...

Merge tag 'loongarch-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Optimise getcpu() with vDSO

 - PCI enablement on top of pci & irqchip changes

 - Stack unwinder and stack trace support

 - Some bug fixes and build error fixes

 - Update the default config file

* tag 'loongarch-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  docs/zh_CN/LoongArch: Add I14 description
  docs/LoongArch: Add I14 description
  LoongArch: Update Loongson-3 default config file
  LoongArch: Add USER_STACKTRACE support
  LoongArch: Add STACKTRACE support
  LoongArch: Add prologue unwinder support
  LoongArch: Add guess unwinder support
  LoongArch: Add vDSO syscall __vdso_getcpu()
  LoongArch: Add PCI controller support
  LoongArch: Parse MADT to get multi-processor information
  LoongArch: Jump to the link address before enable PG
  LoongArch: Requires __force attributes for any casts
  LoongArch: Fix unsigned comparison with less than zero
  LoongArch: Adjust arch/loongarch/Kconfig
  LoongArch: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK

Pull power supply and reset updates from Sebastian Reichel:
 "No core patches, only driver updates:

   - pwr-mlxbf: new reset driver for Mellanox BlueField

   - at91-reset: SAMA7G5 support

   - ab8500: continue refurbishing

   - misc minor fixes"

* tag 'for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits)
  power: supply: olpc_battery: Hold the reference returned by of_find_compatible_node
  power: supply: ab8500: add missing destroy_workqueue in ab8500_charger_bind
  power: supply: ab8500: Remove flush_scheduled_work() call.
  power: supply: ab8500_fg: drop duplicated 'is' in comment
  power: supply: ab8500: Drop external charger leftovers
  power: supply: ab8500: Add MAINTAINERS entry
  dt-bindings: power: reset: qcom,pshold: convert to dtschema
  power: supply: Fix typo in power_supply_check_supplies
  power: reset: pwr-mlxbf: change rst_pwr_hid and low_pwr_hid from global to local variables
  power: reset: pwr-mlxbf: add missing include
  power: reset: at91-reset: add support for SAMA7G5
  power: reset: at91-reset: add reset_controller_dev support
  power: reset: at91-reset: add at91_reset_data
  power: reset: at91-reset: document structures and enums
  dt-bindings: reset: add sama7g5 definitions
  dt-bindings: reset: atmel,at91sam9260-reset: add sama7g5 bindings
  dt-bindings: reset: convert Atmel/Microchip reset controller to YAML
  power: reset: pwr-mlxbf: add BlueField SoC power control driver
  power: supply: ab8500: Exit maintenance if too low voltage
  power: supply: ab8500: Respect charge_restart_voltage_uv
  ...

Pull another VFIO update from Alex Williamson:

 - Rename vfio source file to more easily allow additional source
   files in the upcoming development cycles (Jason Gunthorpe)

* tag 'vfio-v6.0-rc1pt2' of https://github.com/awilliam/linux-vfio:
  vfio: Move vfio.c to vfio_main.c

Commit 36d4b36b ("lib/nodemask: inline next_node_in() and
node_random()") removed the lib/nodemask.c file, but the remove didn't
happen when the patch was applied.
Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix device tree schema validation messages like 'gpio-line-names'
does not match any of the regexes: 'pinctrl-[0-9]+' From schema: ...
sifive,gpio.yaml'.

The bindings were missing the gpio-line-names element, which was
causing the dt-schema checker to trip-up.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Atul Khare <atulkhare@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220803155539.800766-1-mail@conchuod.ieSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

When the CONFIG_PORTABLE/CONFIG_NONPORTABLE switches were added, various
configs were updated, but the wireguard config was forgotten about. This
leads to unbootable test kernels, causing CI fails. Add
CONFIG_NONPORTABLE=y to the wireguard test suite configuration for
riscv32.

Fixes: 44c1e84a ("RISC-V: Add CONFIG_{NON,}PORTABLE")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220809145757.83673-1-Jason@zx2c4.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Sstc extension allows the guest to program the vstimecmp CSR directly
instead of making an SBI call to the hypervisor to program the next
event. The timer interrupt is also directly injected to the guest by
the hardware in this case. To maintain backward compatibility, the
hypervisors also update the vstimecmp in an SBI set_time call if
the hardware supports it. Thus, the older kernels in guest also
take advantage of the sstc extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/CAAhSdy2mb6wyqy0NAn9BcTWKMYEc0Z4zU3s3j7oNqBz6eDQ9sg@mail.gmail.com/Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

A series of mostly-independent fixes and cleanups for the RISC-V PMU
drivers.

Link: https://lore.kernel.org/lkml/CAAhSdy23vE8+HxU5Jxy2rBMjy3rBTrJt_4sriuROac_sEESSVw@mail.gmail.com/T/#m9de15aef1b65ae6155fa33ea1239578ef463c2a2

* palmer/riscv-pmu:
  RISC-V: Improve SBI definitions
  RISC-V: Move counter info definition to sbi header file
  RISC-V: Fix SBI PMU calls for RV32
  RISC-V: Update user page mapping only once during start
  RISC-V: Fix counter restart during overflow for RV32

Commit 6f8191fd ("block: simplify disk shutdown") removed the call
to blk_get_queue() during gendisk allocation but missed to remove the
corresponding cleanup code blk_put_queue() for it. Thus, if the gendisk
allocation fails, the request_queue refcount gets decremented and
reaches 0, causing blk_mq_release() to be called with a hctx still
alive. That triggers a WARNING report, as found by syzkaller:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 23016 at block/blk-mq.c:3881
blk_mq_release+0xf8/0x3e0 block/blk-mq.c:3881
[...] stripped
RIP: 0010:blk_mq_release+0xf8/0x3e0 block/blk-mq.c:3881
[...] stripped
Call Trace:
 <TASK>
 blk_release_queue+0x153/0x270 block/blk-sysfs.c:780
 kobject_cleanup lib/kobject.c:673 [inline]
 kobject_release lib/kobject.c:704 [inline]
 kref_put include/linux/kref.h:65 [inline]
 kobject_put+0x1c8/0x540 lib/kobject.c:721
 __alloc_disk_node+0x4f7/0x610 block/genhd.c:1388
 __blk_mq_alloc_disk+0x13b/0x1f0 block/blk-mq.c:3961
 loop_add+0x3e2/0xaf0 drivers/block/loop.c:1978
 loop_control_ioctl+0x133/0x620 drivers/block/loop.c:2150
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:870 [inline]
 __se_sys_ioctl fs/ioctl.c:856 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...] stripped

Fixes: 6f8191fd ("block: simplify disk shutdown")
Reported-by: syzbot+31c9594f6e43b9289b25@syzkaller.appspotmail.com
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220811232338.254673-1-rafaelmendsr@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

I14 is also a kind of immediate operand in instruction, like I8/I12/I16/
I21/I26, add it in the Chinese documentation.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

I14 is also a kind of immediate operand in instruction, like I8/I12/I16/
I21/I26, add it in the English documentation.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

1, Add NVME related options;
2, Add compressed firmware support;
3, Add virtio drivers in order to run in qemu.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

To get the best stacktrace output, you can compile your userspace
programs with frame pointers (at least glibc + the app you are tracing).

1, export "CC = gcc -fno-omit-frame-pointer";
2, compile your programs with "CC";
3, use uprobe to get stacktrace output.

...
     echo 'p:malloc /usr/lib64/libc.so.6:0x0a4704 size=%r4:u64' > uprobe_events
     echo 'p:free /usr/lib64/libc.so.6:0x0a4d50 ptr=%r4:x64' >> uprobe_events
     echo 'comm == "demo"' > ./events/uprobes/malloc/filter
     echo 'comm == "demo"' > ./events/uprobes/free/filter
     echo 1 > ./options/userstacktrace
     echo 1 > ./options/sym-userobj
...
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

1. Use common arch_stack_walk() infrastructure to avoid duplicated code
   and avoid taking care of the stack storage and filtering.
2. Add sched_ra (means sched return address) and sched_cfa (means sched
   call frame address) to thread_info, and store them in switch_to().
3. Add __get_wchan() implementation.

Now we can print the process stack and wait channel by cat /proc/*/stack
and /proc/*/wchan.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

It unwind the stack frame based on prologue code analyze.
CONFIG_KALLSYMS is needed, at least the address and length
of each function.

Three stages when we do unwind,
  1) unwind_start(), the prapare of unwinding, fill unwind_state.
  2) unwind_done(), judge whether the unwind process is finished or not.
  3) unwind_next_frame(), unwind the next frame.

Dividing unwinder helps to add new unwinders in the future, e.g.:
unwinder_frame, unwinder_orc, .etc.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Name "guess unwinder" comes from x86, it scans the stack and reports
every kernel text address it finds.

Unwinders can be used by dump_stack() and other stacktrace functions.

Three stages when we do unwind,
  1) unwind_start(), the prapare of unwinding, fill unwind_state.
  2) unwind_done(), judge whether the unwind process is finished or not.
  3) unwind_next_frame(), unwind the next frame.

Add get_stack_info() to get stack info. At present we have irq stack and
task stack. The next_sp is the key info between two types of stacks.

Dividing unwinder helps to add new unwinders in the future.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

We test 20 million times of getcpu(), the real syscall version take 25
seconds, while the vsyscall version take only 2.4 seconds.
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Loongson64 based systems are PC-like systems which use PCI/PCIe as its
I/O bus, This patch adds the PCI host controller support for LoongArch.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>