Currently pmc_core_substate_res_show() uses array of char pointers
i.e., lpm_modes for Tiger Lake directly to iterate through and to get
the number of low power modes which is hardcoded and cannot be re-used
for future platforms that support sub-states. To maintain readability,
make pmc_core_substate_res_show() generic, so that it can re-used for
future platforms.

Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: intel_pmc_core: Make pmc_core_lpm_display() generic for platforms that support sub-states

Currently pmc_core_lpm_display() uses an array of the struct pointers,
i.e.  tgl_lpm_maps for Tiger Lake directly to iterate through and to get
the number of (live) status registers which is hard coded and can not
be re-used for the future platforms that support sub-states. To maintain
readability, make pmc_core_lpm_display() generic, so that it can be re-used
for future platforms.

Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This patch fix a spelling typo in error message.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Fair number of changes including bug fixes done to change version.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

For platforms where multiple packages/die, this makes "Package-" key
duplicate. To make unique, add die and cpu id to key name.

So "Package-0" key name will change to "Package-0-die-x:cpu-x".

For example:
$sudo ./intel-speed-select -f json  perf-profile info
Intel(R) Speed Select Technology
Executing on CPU model:106[0x6a]
{
  "package-0:die-0:cpu-0": {
    "perf-profile-level-0": {
      "cpu-count": "32",
      "enable-cpu-count": "32",
...
...
 "package-1:die-0:cpu-16": {

    "perf-profile-level-0": {
      "cpu-count": "32",
      "enable-cpu-count": "32",
      "enable-cpu-mask": "ffff0000,ffff0000",
...
...

For non json format, there is no change. Here when print_package_info()
is called, it will return the level to print for other information.
This level is used formatting. Also in some function duplicate code
was there to print package,die and CPU information. Replace all that
code with a call to print_package_info().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

In addition to total CPU count also display "enabled-cpu-count" for
perf-profile info command. This will show number of CPUs in the
"enable-cpu-mask".

For example:

 perf-profile-level-4
        cpu-count:32
        enable-cpu-count:16
        enable-cpu-mask:e42d0000,e42d0000
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When user specifies invalid option, display "Unknown Option: ignore",
instead of "no match". Also display error for garbage on the command
line.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Specifying "avx2" and "avx512" option for display filter doesn't work
with short option "-r", only works with --try-type. Also compare full
6 characters for "avx512" string.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

CLX doesn't have capability to change the feature in the hardware, but
this acts as "--auto | -a" option. So even if user didn't specify the
option, use this as --auto | -a to set cpufreq scaling frequency limits.

Also remove perror with debug_printf as they don't bring any value.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When --cpu or -c is used to specify target CPUs and non of them are valid,
display error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This change adds improved error display and handling for commands related
to core-power feature. The changes include:
- Replace perror with helpful error message
- Use ordered priority for SKX based platform by default as the
proportional priority is not supported
- Don't show weight and epp in help and also give error when user
tries to set them in SKX based platforms
- Range check for epp and weights and display error
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Treat a case when mailbox/mmio command can't be handled by the kernel
drivers when the module is removed or send a command which no driver can
handle. In this case ENOTTY result is returned, so print error.

Also when the isst_if_mmio module is removed, we can't send CLOS message
messages via Mailbox on non SKX based platforms. When this module is
removed,  isst_platform_info.mmio_supported is set to 0. So it can't be
used as a condition to send via mailbox. Here replace check for Skylake
based platform to send via mailbox, other platforms can't use mailbox in
lieu of MMIO.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This change adds improved error display and handling for commands related
to turbo-freq feature. The changes include:
- Replace perror/fprintf with helpful error message
- Error for not specifying TDP level when required
- Show error for invalid bucket number
- Show message to enable core-power before enabling turbo-freq feature
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This change adds improved error display and handling for commands related
to base-freq feature. The changes include:
- Replace perror/fprintf with helpful error message
- Error for not specifying TDP level when required
- For CLX show help which shows limitation
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Improve output of perf-profile commands:
get-config-enabled
get-lock-status

Instead of showing 0/1, show meaningful strings. Also show error when
command is failed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Enhance help to specify CPU and clos by an example.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When priority type for core-power enable command is anything more than 1
display error before change to 1, which is ordered priority.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Before looking for information about the base-freq or turbo-freq details,
first check if the feature is supported at that level. If not print error
and return.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This change adds improved error display and handling for commands related
to perf-profile feature. The changes include:
- When invalid TDP level is passed. display error and exit
- Replace perror with helpful error message
- Show error when TDP level can't be set
- Print error when information can't be read for a level
- Validate user options for invalid level
- Display error for TDP lock status
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add a common API which can be used to print all error and information
messages. In this way a common format can be used.

For json output an error index in suffixed to make unique error key.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add additional information, which will allow user to detect available
features. This will allow users to check presence of features before
continue to test.
A sample output:

$sudo ./intel-speed-select --info

Intel(R) Speed Select Technology
Executing on CPU model:85[0x55]
Platform: API version : 1
Platform: Driver version : 1
Platform: mbox supported : 1
Platform: mmio supported : 0
Intel(R) SST-PP (feature perf-profile) is not supported
Only performance level 0 (base level) is present
TDP level change control is locked
Intel(R) SST-TF (feature turbo-freq) is supported
Intel(R) SST-BF (feature base-freq) is supported
Intel(R) SST-CP (feature core-power) is supported
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Enhance help message which adds some example. The changes include:
- Print help when options are not recognized.
- For CLX, display only options which are applicable.
- Sort options in alphatical order.
- Disply help() instead of error:
"Feature name and|or command not specified"
- Remove duplicate display of
Intel(R) Speed Select Technology
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When the device file "/dev/isst_interface" is not present, instead of
failing on access, check at the start and print a helpful warning.

Here CLX platform is an exception, which doesn't depend on the device
file. So continue for CLX platform.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Once the CPU is offline, the topology information (core-id, package-id,
die-id) is not accessible via sysfs. So when user selects a config level
more than base config 0 and offlined CPUs to match the config level,
to return to base config he has to manually online CPUs before. Without
this CPUs information mapping from Punit CPU numbering will lot work
as it needs atlest package id for each CPU.

To avoid this additional steps store the topology information in a file
, which is created on the very first run after boot. Since system boots
in base config and all CPUs are online, we can get information about
every CPU.

Once any of the APIs like get_physical_package_id(),
get_physical_core_id() or get_physical_die_id() fails to read from
sysfs, read from the stored mapping file.

This mapping file is stored in /tmp file system. so on every boot
it is recreated to make sure that any new CPUs are added to the
system before boot are taken into account.

But don't use the stored physical device id  when trying to get
information for CPU to send message in for_each_online_package_in_set().
Here use the real value from syfs and in case fails try the next CPU.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Currently /sys/devices/system/cpu/cpu0/topology/thread_siblings is used to
get the max CPU count. But when CPU0 is offline, then this file will be
absent.

So add processing so that we can get count from any first CPU in the
system. which is online.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When "-o" option for force online/offline is used with command:
perf-profile set-config-level

If the config level calls for CPU 0 online/offline, then call fails
as there is special kernel setup required for CPU 0 online/offline
and the currently not setup for that.

But when call is for online CPU 0, then don't fail. Just warn that
this system is not setup for CPU 0 online/offline.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Instead of displaying 0 and 1 for enable status, display "disabled"
and "enabled" respectively.

Similarly for priority type, display "ordered or proportional" instead
of 0 and 1.

An example display:

$intel-speed-select -c 1 core-power info
Intel(R) Speed Select Technology
..
 package-0
  die-0
    cpu-1
      core-power
        support-status:supported
        enable-status:enabled
        clos-enable-status:enabled
        priority-type:proportional
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

In addition to CLOS enable status, also show the core-power feature
status. This will help why clos enable status didn't give desired
results as the core-power feature may be disabled or unsupported.

The new display looks as follows:

$intel-speed-select core-power info
Intel(R) Speed Select Technology
..
 package-0
  die-0
    cpu-0
      core-power
        support-status:supported
        enable-status:enabled
        clos-enable-status:1
        priority-type:0

In the above display "support-status" and "enable-status", shows the
status of the core-power feature and "clos-enable-status", shows the
status of the clos.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Currently "-c" is a mandatory option for "core-power info" command. Make
this optional as this is a per package/die property. When not specified,
it will print info for every package/die.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When CPU is offline, we can't get package id. So print error for this
and don't use output.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Here topology_max_cpus is used for total CPU count, not the last CPU
number. So remove "-1".
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Even for the products using MMIO, this message needs to be sent via
mail box. The previous fix done for this didn't properly address this.
That fix simply removed sending command via MMIO, but still didn't
trigger sending via mailbox.

Add additional condition to check for CLOS_PM_QOS_CONFIG, when MMIO
is supported on a platform.

Fixes: cd0e6370 (tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG)
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Commit 1f27dbd8 ("platform/x86: GPD pocket fan: Allow somewhat
lower/higher temperature limits") changed the module-param sanity check
to accept temperature limits between 20 and 90 degrees celcius.

But the error message printed when the module params are outside this
range was not updated. This commit updates the error message to match
the new min and max value for the temp-limits.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The MMIO driver is not unregistering with the correct type with the ISST
common core during module removal. This should be unregistered with
ISST_IF_DEV_MMIO instead of ISST_IF_DEV_MBOX.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Function fan_boost_mode_store returns 0 if store is successful,
this leads to infinite loop after any write to it's sysfs entry:

# echo 0 >/sys/devices/platform/asus-nb-wmi/fan_boost_mode

This command never ends, one CPU core is at 100% utilization.
This patch fixes this by returning size of written data.

Fixes: b096f626 ("platform/x86: asus-wmi: Switch fan boost mode")
Signed-off-by: Leonid Maksymchuk <leonmaxx@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The WMI method to set the charge threshold does not provide a
way to specific a battery, so we assume it is the first/primary
battery (by checking if the name is BAT0).
On some newer ASUS laptops (Zenbook UM431DA) though, the
primary/first battery isn't named BAT0 but BATT, so we need
to support that case.

Fixes: 7973353e ("platform/x86: asus-wmi: Refactor charge threshold to use the battery hooking API")
Cc: stable@vger.kernel.org
Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

'paramaters' should be 'parameters'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

On module unload wait for relese callback for each packag_die entry
and then free the memory. This is done by waiting on a completion
object, till release() callback.

While here, also change to kobject_init_and_add() to
kobject_create_and_add() to simplify.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>