- 10 Jun, 2021 40 commits
-
-
Alex Elder authored
Finally the code handles the IPA memory region array in the configuration data without assuming it is indexed by region ID. Get rid of the array index designators where these arrays are initialized. As a result, there's no more need to define an explicitly undefined memory region ID, so get rid of that. Change ipa_mem_find() so it no longer assumes the ipa->mem[] array is indexed by memory region ID. Instead, have it search the array for the entry having the requested memory ID, and return the address of the descriptor if found. Otherwise return NULL. Stop allowing memory regions to be defined with zero size and zero canary value. Check for this condition in ipa_mem_valid_one(). As a result, it is not necessary to check for this case in ipa_mem_config(). Finally, there is no need for IPA_MEM_UNDEFINED to be defined any more, so get rid of it. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Introduce a new function that abstracts finding information about a region in IPA-local memory, given its memory region ID. For now it simply uses the region ID as an index into the IPA memory array. If the region is not defined, ipa_mem_find() returns a null pointer. Update all code that accesses the ipa->mem[] array directly to use ipa_mem_find() instead. The return value must be checked for null when optional memory regions are sought. Signed-off-by:
-
Alex Elder authored
Stop passing most of the Boolean flags to ipa_table_valid_one(), and just pass a memory region ID to it instead. We still need to indicate whether we're operating on a routing or filter table. Signed-off-by:
-
Alex Elder authored
Pass a memory region ID rather than the address of a memory region descriptor to ipa_table_reset_add() to simplify callers. Similarly, pass memory region IDs to ipa_table_init_add(). Signed-off-by:
-
Alex Elder authored
Pass a memory region ID rather than the address of a memory region descriptor to ipa_mem_zero_region_add() to simplify callers. Signed-off-by:
-
Alex Elder authored
Pass a memory region ID rather than the address of a memory region descriptor to ipa_filter_reset_table(), to simplify callers. We can eliminate the check for a zero region size in this function because ipa_table_reset_add() checks that before adding anything to the transaction. Note that here and in subsequent commits there is no need to check whether a memory region exists, because we will have already verified that during initialization. Signed-off-by:
-
Alex Elder authored
Do some general cleanup in ipa_cmd_header_valid(): - Delay assigning the mem variable until just before it's used. - Assign the maximum offset and size values together. - Improve comments explaining the single range of memory being made up of a modem portion and an AP portion. - Record the offset of the combined range in a local variable. - Do the initial size assignment right after assigning the offset. Signed-off-by: -
Alex Elder authored
Change ipa_mem_valid() to iterate over the entries using a u32 index variable rather than using a memory region ID. Use the ID found inside the memory descriptor rather than the loop index. Change ipa_mem_size_valid() to iterate over the entries but without assuming the array index is the memory region ID. "Empty" entries will have zero size; and we'll temporarily assume such entries have zero offset as well (they all do, currently). Similarly, don't assume the mem[] array is indexed by ID in ipa_mem_config(). There, "empty" entries will have a zero canary count, so no special assumptions are needed to handle them correctly. Signed-off-by:
-
Cristobal Forno authored
Allow the device to be initialized at a later time if it is not available at boot. The device will be allowed to probe but will be given a "down" state. After completing device probe and registering the net device, the driver will await an interrupt signal from its partner device, indicating that it is ready for boot. The driver will schedule a work event to perform the necessary procedure and begin operation. Co-developed-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
Cristobal Forno <cforno12@linux.ibm.com> Acked-by:
Lijun Pan <lijunp213@gmail.com> Reviewed-by:
Dany Madden <drt@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Vadym Kochan says: ==================== net: marvell: prestera: add LAG support The following features are supported: - LAG basic operations - create/delete LAG - add/remove a member to LAG - enable/disable member in LAG - LAG Bridge support - LAG VLAN support - LAG FDB support Limitations: - Only HASH lag tx type is supported - The Hash parameters are not configurable. They are applied during the LAG creation stage. - Enslaving a port to the LAG device that already has an upper device is not supported. Changes extracted from: https://lkml.org/lkml/2021/2/3/877 and marked with "v2". v2: There are 2 additional preparation patches which simplifies the netdev topology handling. 1) Initialize 'lag' with NULL in prestera_lag_create() [suggested by Vladimir Oltean] 2) Use -ENOSPC in prestera_lag_port_add() if max lag [suggested by Vladimir Oltean] numbers were reached. 3) Do not propagate netdev events to prestera_switchdev [suggested by Vladimir Oltean] but call bridge specific funcs. It simplifies the code. 4) Check on info->link_up in prestera_netdev_port_lower_event() [suggested by Vladimir Oltean] 5) Return -EOPNOTSUPP in prestera_netdev_port_event() in case [suggested by Vladimir Oltean] LAG hashing mode is not supported. 6) Do not pass "lower" netdev to bridge join/leave functions. [suggested by Vladimir Oltean] It is not need as offloading settings applied on particular physical port. It requires to do extra upper dev lookup in case port is in the LAG which is in the bridge on vlans add/del. ==================== Signed-off-by: -
Serhiy Boiko authored
The following features are supported: - LAG basic operations - create/delete LAG - add/remove a member to LAG - enable/disable member in LAG - LAG Bridge support - LAG VLAN support - LAG FDB support Limitations: - Only HASH lag tx type is supported - The Hash parameters are not configurable. They are applied during the LAG creation stage. - Enslaving a port to the LAG device that already has an upper device is not supported. Co-developed-by:Andrii Savka <andrii.savka@plvision.eu> Signed-off-by:
Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by:
Vadym Kochan <vkochan@marvell.com> Signed-off-by:
-
Vadym Kochan authored
Replace prestera_bridge_port_event(...) by prestera_bridge_port_join(...) and prestera_bridge_port_leave(). It simplifies the code by reading netdev event specific handling only once in prestera_main.c Signed-off-by:
-
Vadym Kochan authored
Move handling of PRECHANGEUPPER event from prestera_switchdev to prestera_main which is responsible for basic netdev events handling and routing them to related module. Signed-off-by:
-
Tan Zhongjun authored
The platform_get_irq() prints error message telling that interrupt is missing,hence there is no need to duplicated that message in the drivers. Signed-off-by:
Tan Zhongjun <tanzhongjun@yulong.com> Signed-off-by:
-
Baokun Li authored
Add description for `tfrc_invert_loss_event_rate` to fix the W=1 warnings: net/dccp/ccids/lib/tfrc_equation.c:695: warning: Function parameter or member 'loss_event_rate' not described in 'tfrc_invert_loss_event_rate' Signed-off-by:
Baokun Li <libaokun1@huawei.com> Reviewed-by:
Richard Sailer <richard_siegfried@systemli.org> Signed-off-by:
-
Wang Hai authored
Convert list_for_each() to list_for_each_entry() where applicable. This simplifies the code. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Wang Hai authored
Convert list_for_each() to list_for_each_entry() where applicable. This simplifies the code. Reported-by:
-
Wang Hai authored
Convert list_for_each() to list_for_each_entry() where applicable. This simplifies the code. Reported-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code and avoid a null-ptr-deref by checking 'res' in it. Signed-off-by:
-
Wong Vee Khee authored
The commit 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure") introduced the following coverity warning: "Parse warning (PW.MIXED_ENUM_TYPE)" "1. mixed_enum_type: enumerated type mixed with another type" This is due to both "lo_state" and "lp_sate" which their datatype are enum stmmac_fpe_state type, and being assigned with "FPE_EVENT_UNKNOWN" which is a macro-defined of 0. Fixed this by assigned both these variables with the correct enum value. Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure") Signed-off-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by:
-
Yang Yingliang authored
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== net: ixp4xx_hss: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: -
Peng Li authored
Braces {} should be used on all arms of this statement. Signed-off-by:Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Peng Li authored
Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, space prohibited after that open parenthesis '('. Signed-off-by: -
Peng Li authored
Add space required before the open parenthesis '('. Add space required after that close brace '}'. Signed-off-by: -
Peng Li authored
Should not use assignment in if condition. Signed-off-by:
-
Peng Li authored
Fix the checkpatch error as "foo* bar" and should be "foo *bar", and "(foo*)" should be "(foo *)". Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
gushengxian authored
Fix a spelling mistake. Signed-off-by:
gushengxian <gushengxian@yulong.com> Signed-off-by:
-
gushengxian authored
Fix the use of copular verb. Signed-off-by:
-
gushengxian authored
Fix the use of indefinite article. Signed-off-by:
-
gushengxian authored
Remove the repeated word "and". Signed-off-by:
-
gushengxian authored
Remove the repeated word "be". Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2021-06-09 Introduce steering header insert/remove and switchdev bridge offloads 1) From Yevgeny, Steering header insert/remove support ConnectX supports offloading of various encapsulations and decapsulations (e.g. VXLAN), which are performed by 'Packet Reformat' action. Starting with ConnectX-6 DX, a new reformat type is supported - INSERT_HEADER. This reformat allows inserting an arbitrary size buffer at a selected location in the packet on RX flows. The insert/remove header support are needed as a prerequisite for the bridge offloads vlan pop/push supprt, see below. 2) From Vlad, Support for bridge offloads for switchdev mode This change implements bridge offloads with VLAN-support that works on top of mlx5 representors in switchdev mode. HIGH-LEVEL OVERVIEW Hardware supported by mlx5 driver doesn't provide dynamic learning or aging functionality and requires the driver to emulate all switch-like behavior in software. As such, all packets by default go through miss path, appear on representor and get to software bridge, if it is the upper device of the representor. This causes bridge to process packet in software, learn the MAC address to FDB and send SWITCHDEV_FDB_ADD_TO_DEVICE event to all subscribers. Upon reception of SWITCHDEV_FDB_ADD_TO_DEVICE notification mlx5 bridge offloads the FDB to hardware and sends back SWITCHDEV_FDB_ADD_TO_BRIDGE notification to prevent such entries from being aged out by kernel bridge. Leaving aging to kernel bridge would result deletion of offloaded dynamic FDB entries every aging_time period due to packets being processed by hardware and, consecutively, 'used' timestamp for FDB entry not being updated. Hardware aging is emulated in driver by running periodic workqueue task that manually updates the rules according to their hardware counter: - If hardware counter has changed since last update, the handler updates 'used' timestamp in kernel bridge dynamic entry by sending SWITCHDEV_FDB_ADD_TO_BRIDGE notification for the entry. - If FDB entry wasn't updated for user-controllable aging_time period, then the FDB entry is unoffloaded from hardware and corresponding SWITCHDEV_FDB_DEL_TO_BRIDGE notification is sent to kernel bridge. The mlx5 bridge offload implementation fully supports port VLAN objects, including PVID (vlan push) and "Egress Untagged" (vlan pop). SOFTWARE ARCHITECTURE Mlx5_eswitch is extended with pointer to new mlx5_esw_bridge_offloads structure which has a linked list of mlx5_esw_bridge objects. Struct mlx5_esw_bridge is the main switch object in mlx5 that holds all data for offloaded FDB entries and metadata for bridge ports and their vlans. The mlx5_esw_bridge object is created when first representor of eswitch vport is added to bridge and deleted when the last representor is detached from it. Bridge FDB entries are saved in linked list (to iterate over all FDB entries in aging workqueue task) and also in hashtable for quick lookup by MAC+VLAN tuple. Bridge FDB entries are saved in linked list (to iterate over all FDB entries in aging workqueue task) and in hashtable for quick lookup by MAC+VLAN tuple. Port metadata is stored in struct mlx5_esw_bridge_port that is saved in xarray to allow quick lookup by vport number. Part of the port metadata is the set of port vlans that are represented by mlx5_esw_bridge_vlan structure. The vlan structure points to all FDBs on vlan/port via fdb_list linked list. Simplified diagram of mlx5 bridge objects: +------------------+ | mxl5_eswitch | | | | br_offloads | +--------+---------+ | +--------v-------------------+ | mlx5_esw_bridge_offloads | | | +--> bridges | | +-------+--------------------+ | | | | | +---v---------------+ | | mlx5_esw_bridge | | | | | | vports | | | | | | fdb_ht | | +---+---------------+ | | | +---v---------------+ +------+ mlx5_esw_bridge | | | +-------------------------+ vports | | | | | | fdb_ht +------------------------------------------+ | +-------------------+ | | | | | | +----------------------+ +---------------------------+ | +-> mlx5_esw_bridge_port | +--> mlx5_esw_bridge_fdb_entry <-+ | | | +----------------------+ | +--+------------------------+ | | | vlans +--+-> mlx5_esw_bridge_vlan | | | | | | | | | | | +--v------------------------+ | | +----------------------+ | | fdb_list +--+ | mlx5_esw_bridge_fdb_entry <-+ | | +-------^--------------+ +--+------------------------+ | | +----------------------+ | | | | +-> mlx5_esw_bridge_port | | +-----------------------+ | | | | | | vlans | | -----------------------+ | | | +-> mlx5_esw_bridge_vlan | | +----------------------+ | | +---------------------------+ | | fdb_list +-----> mlx5_esw_bridge_fdb_entry <-+ +-------^--------------+ +--+------------------------+ | | +-----------------------+ HARDWARE REPRESENTATION In order to adhere to kernel software datapath model bridge offloads must come after TC and NF FDBs. However, since netfilter offload in mlx5 is implemented with unmanaged tables, its miss path is not automatically connected to next priority and requires the code to manually connect with slow table. To keep bridge offloads encapsulated and not mix it with eswitch offloads new FDB_TC_MISS priority is created between FDB_FT_OFFLOAD and FDB_SLOW_PATH which allows bridge offloads to be created without exposing its internal tables to any other modules since miss path of managed TC-miss table is automatically wired to next priority. The bridge tables are created with new priority FDB_BR_OFFLOAD in FDB namespace. The new priority is between tc-miss and slow path priorities. Priority consist of two levels: the ingress table that is global per eswitch and matches incoming packets by src_mac/vid and redirects them to next level (egress table) that is chosen according to ingress port bridge membership and matches on dst_mac/vid in order to redirect packet to vport according to the following diagram: + | +---------v----------+ | | | FDB_TC_OFFLOAD | | | +---------+----------+ | | +---------v----------+ | | | FDB_FT_OFFLOAD | | | +---------+----------+ | | +---------v----------+ | | | FDB_TC_MISS | | | +---------+----------+ | +--------------------------------------+ | | | | +------+ | | | | | +------v--------+ FDB_BR_OFFLOAD | | | INGRESS_TABLE | | | +------+---+----+ | | | | match | | | +---------+ | | | | | +-------+ | | +-------v-------+ match | | | | | | EGRESS_TABLE +------------> vport | | | +-------+-------+ | | | | | | | +-------+ | | miss | | | +------+------+ | | | | +--------------------------------------+ | | +---------v----------+ | | | FDB_SLOW_PATH | | | +---------+----------+ | v PATCHES OVERVIEW 1-3 - Miscellaneous refactorings and infrastructure changes. 4 - Mlx5 bridge offload infrastructure and dedicated fs_core namespace/tables implementation. 5 - FDB entry offload. 6 - Dynamic FDB entry aging. 7-10 - VLAN filtering offload. 11 - Tracepoints for main mlx5 bridge offload events (FDB entry offload/unoffload, VLAN add/delete, etc.) ==================== Signed-off-by: -
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code and avoid a null-ptr-deref by checking 'res' in it. Signed-off-by:
-
