- 01 Nov, 2018 2 commits
-
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Alexey Brodkin <abrodkin@synopsys.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-2-noralf@tronnes.org
-
Chris Wilson authored
drivers/gpu/drm/drm_syncobj.c:181:6: warning: no previous prototype for ‘drm_syncobj_add_callback’ [-Wmissing-prototypes] drivers/gpu/drm/drm_syncobj.c:190:6: warning: no previous prototype for ‘drm_syncobj_remove_callback’ [-Wmissing-prototypes] Fixing that leads to drivers/gpu/drm/drm_syncobj.c:181:13: warning: ‘drm_syncobj_add_callback’ defined but not used [-Wunused-function] so remove the unused drm_syncobj_add_callback() entirely. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181031120710.21582-1-chris@chris-wilson.co.ukReviewed-by:
Chunming Zhou <david1.zhou@amd.com>
-
- 30 Oct, 2018 18 commits
-
-
Eric Anholt authored
If the clipped dirty region's x/y happened to align to 256, we would have set the top 8 bits wrong. Noticed by inspection, not by reproducing a bug. Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-4-eric@anholt.netReviewed-by:
-
Eric Anholt authored
I want to sort out support for tinydrm in vc4, so I needed to get a tinydrm-appropriate panel working and this is what I had on hand. This is derived from a combination of ili9341.c from tinydrm and fb_hx8357d.c from staging's fbtft. v2: Write my own register defs from the spec to not need the header from fbtft. Fix spi device string to enable module autoloading. (Suggestions by Noralf) Signed-off-by: -
Eric Anholt authored
This adds a new binding for Himax HX8357D display panels. It includes a compatible string for one display (more can be added in the future). The YX350HV15 panel[1] is found in the Adafruit PiTFT 3.5" Touch Screen for Raspberry Pi. [1] https://learn.adafruit.com/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi/downloads This binding is closely modeled after the ili9341 binding, for a similar product from adafruit. The primary difference is that the hx8357d doesn't have a reset line that I can find in the schematics. v2: Document the "reg" property (requested by Rob), fix commit message typo (Noralf) Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Eric Anholt authored
Without this, the xserver relies on what the 3D driver exposes and assumes that the display can handle it, and then the DRM driver happily tries to scan out a tiled format. Signed-off-by:
-
Gerd Hoffmann authored
Recent qemu (latest master branch, upcoming 3.1 release) got support for EDID data. This patch adds guest driver support. EDID support in qemu is not (yet) enabled by default, so please use 'qemu -device VGA,edid=on' for testing. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20181029205048.13200-1-kraxel@redhat.com
-
Heiko Stuebner authored
Add the Rockchip-sepcific dual-dsi setup and hook it into the VOP as well. As described in the general dual-dsi devicetree binding, the panel should define two input ports and point each of them to one of the used dsi- controllers, as well as declare one of them as clock-master. This is used to determine the dual-dsi state and get access to both controller instances. v6: handle master+slave component in dsi-attach v5: use driver-internal mechanism to find dual dsi slave v4: add component directly in probe when adding empty dsi slave controller Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Nickey Yang authored
Allow to also drive a slave dw-mipi-dsi controller in a dual-dsi setup. This will require additional implementation-specific code to look up the slave instance and do specific setup. Also will probably need code in the specific crtcs as dual-dsi does not equal two separate dsi outputs. To activate, the implementation-specific code should set the slave using dw_mipi_dsi_set_slave() before calling __dw_mipi_dsi_bind(). v2: - expect real interface number of lanes - keep links to both master and slave v3: - remove unneeded separate variables - remove unneeded second slave settings - disable slave before master - lane-sum calculation comments Signed-off-by:
Nickey Yang <nickey.yang@rock-chips.com> Signed-off-by:
Philippe Cornu <philippe.cornu@st.com> Reviewed-by:
-
Nickey Yang authored
Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare MIPI DSI host controller bridge and remove the old separate one. changes: v2: add err_pllref, remove unnecessary encoder.enable & disable correct spelling mistakes v3: call dw_mipi_dsi_unbind() in dw_mipi_dsi_rockchip_unbind() fix typo, use of_device_get_match_data(), change some bind() logic into probe() add 'dev_set_drvdata()' v4: return -EINVAL when can not get best_freq add a clarifying comment when get vco add review tag v5: keep our power domain enabled while touching GRF v6: change func name dw_mipi_encoder_disable to dw_mipi_dsi_encoder_disable v7: none v8: Heiko add Archit's Review tag adapt to recent changes in the original rockchip-dsi driver beautify grf-handling split hw-setup (resources, dsi-host) from bind into probe v2-new: Heiko add SPDX header instead of license blurb drop old versioning to not confuse people v3-new: Heiko include ordering moved hwaccess from mode_set to enable callback move pllref_clk enablement to bind (needed by bridge mode_set->lane_mbps) v4-new: Heiko rebase against recent rockchip-dsi changes move to call component_add in the new glue host-attach Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Archit Taneja <architt@codeaurora.org> Reviewed-by:
-
Heiko Stuebner authored
With the regular means of adding the dsi-component in probe it creates a race condition with the panel probing, as the panel device only gets created after the dsi-bus got created. When the panel-driver is build as a module it currently fails hard as the panel cannot be probed directly: dw_mipi_dsi_bind() __dw_mipi_dsi_probe() creates dsi bus creates panel device triggers panel module load panel not probed (module not loaded or panel probe slow) drm_bridge_attach fails with -EINVAL due to empty panel_bridge Additionally the panel probing can run concurrently with dsi bringup making it possible that the panel can already be found but dsi-attach hasn't finished running. To solve that cleanly we may want to only create the component after the panel has finished probing, by calling component_add from the host-attach dsi callback. As that is specific to glue drivers, add a new struct for host_ops so that glue drivers can tell the bridge to call specific functions after the common host-attach and before the common host-detach run. Suggested-by: -
Heiko Stuebner authored
__dw_mipi_dsi_probe() does all the grabbing of resources and does it using devm-helpers. So this is happening on each try of master bringup possibly slowing down things a lot. Drivers using the component framework may instead want to call dw_mipi_dsi_probe separately in their probe function to setup resources early. That way the dsi bus also gets created earlier and also not recreated on each bind-try, so that attached panels can load their modules and be probed way before the bridge-attach in the bind call. So drop the call to __dw_mipi_dsi_probe and modify the function to take a struct dw_mipi_dsi instead of the platform-device. Signed-off-by:
-
Heiko Stuebner authored
Right now the host is only unregistered when the driver is used via the bridge api and not via the component api, leading to the host staying registered in cases like probe deferral. So move the host unregister to the general remove function, so that it gets cleaned up in all cases. Signed-off-by:
-
Shayenne da Luz Moura authored
Use 'unsigned int' with bitfield instead of 'bool' to avoid alignment issues and remove checkpatch.pl check: CHECK: Avoid using bool structure members because of possible alignment issues Signed-off-by:
Shayenne da Luz Moura <shayenneluzmoura@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/fcd9d7ea7eec1ac6a3ad9ad16e0fc9ef13c089fd.1540579956.git.shayenneluzmoura@gmail.comSigned-off-by:
-
Shayenne da Luz Moura authored
Add space to remove checkpath.pl error: ERROR: space required before the open parenthesis '(' Signed-off-by: -
Shayenne da Luz Moura authored
Use 'usigned int' instead of 'usigned' to remove the checkpath.pl warning: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by:
-
Shayenne da Luz Moura authored
Remove extra whiteline to clean the checkpatch.pl check: CHECK: Please don't use multiple blank lines Signed-off-by:
-
Shayenne da Luz Moura authored
Add whiteline after variable declarations to remove the checkpath.pl warning: WARNING: Missing a blank line after declarations Signed-off-by:
-
Shayenne da Luz Moura authored
Remove extra tab and space to clean the checkpath.pl error. ERROR: trailing whitespace Signed-off-by:
-
Sabyasachi Gupta authored
Replaced kmem_cache_alloc + memset with kmem_cache_zalloc Signed-off-by:
Sabyasachi Gupta <sabyasachi.linux@gmail.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/5bc9ff7e.1c69fb81.105c2.1fef@mx.google.comSigned-off-by:
-
- 29 Oct, 2018 13 commits
-
-
Matthew Wilcox authored
It is possible to run out of memory while allocating IDs. The current code would create a context with an invalid ID; change it to return -ENOMEM to userspace. Signed-off-by:
Matthew Wilcox <willy@infradead.org> Link: http://patchwork.freedesktop.org/patch/msgid/20180926160031.15721-3-willy@infradead.orgSigned-off-by:
-
Matthew Wilcox authored
These IDRs were only being used to allocate unique numbers, not to look up pointers, so they can use the more space-efficient IDA instead. Signed-off-by:
-
Gerd Hoffmann authored
Move virtio_gpu_resource_id_{get,put} to virtgpu_object.c and make them static. Allocate and free the id on creation and destroy, drop all other calls. That way objects have a valid handle for the whole lifetime of the object. Also fixes ids leaking. Worst offender are dumb buffers, and I think some error paths too. Signed-off-by:Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-7-kraxel@redhat.com
-
Gerd Hoffmann authored
We pass the obj anyway, so obj->hw_res_handle can be used instead in virtio_gpu_object_attach() and virtio_gpu_cmd_create_resource(). Signed-off-by:
-
Gerd Hoffmann authored
Drop pointless res_id variable in virtio_gpu_resource_create_ioctl(), just use the hw_res_handle field in virtio_gpu_object directly. Signed-off-by:
-
Gerd Hoffmann authored
Drop pointless resid variable in virtio_gpu_mode_dumb_create(), just use the hw_res_handle field in virtio_gpu_object directly. Signed-off-by:
-
Gerd Hoffmann authored
Drop pointless resid variable in virtio_gpufb_create(), just use the hw_res_handle field in virtio_gpu_object directly. Signed-off-by:
-
Gerd Hoffmann authored
Track whenever the virtio_gpu_object is already created (i.e. host knows about it) in a new variable. Add checks to virtio_gpu_object_attach() to do nothing on objects not created yet. Make virtio_gpu_ttm_bo_destroy() use the new variable too, instead of expecting hw_res_handle indicating the object state. Signed-off-by:
-
Colin Ian King authored
Trivial fix to a spelling mistake of the error access name EACCESS, rename to EACCES Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Enric Balletbo i Serra authored
This patch avoids that building the bridge/analogix source code with smatch triggers complaints about inconsistent indenting. It also fixes a typo in DRM_ERROR message, attch is replaced for attach. Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Maxime Ripard authored
The is_double flag is a boolean currently assigned to the value of the d variable, that is either 1 or 2. It means that this is_double variable is always set to true, even though the initial intent was to have it set to true when d is 2. Fix this. Fixes: 9c568101 ("drm/sun4i: Add HDMI support") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by:
Giulio Benetti <giulio.benetti@micronovasrl.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181021163446.29135-2-maxime.ripard@bootlin.com
-
Maxime Ripard authored
The is_double variable is used to store, and possibly returning to the calling function, whether it needs to double the rate of the parent clock or not. In the case where it does, the variable is affected, but in the case where it doesn't we return some uninitialized value. Fix this. Reported-by:
-
Emil Velikov authored
Earlier commit updated the vgem driver to improve the topology, by passing a platform device as parent to drm_dev_init(). Shortly afterwords we updated the core function to BUG() in order to catch any buggy drivers passing NULL as parent. While I missed the vkms driver (as the patch predates vkms by a few months), the BUG caught the issue within couple of hours. Swap the drm_dev_init <> platform_device_register_simple order, to the driver back to life. Fixes: f08877e7 ("drm: BUG_ON if passing NULL parent to drm_dev_init") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Deepak Sharma <deepak.sharma@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reported-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
-
- 26 Oct, 2018 3 commits
-
-
Clint Taylor authored
HDMI 2.0 monitors may not support SCDC and still be able to accept VICs above 63. Use multiple EDID capbilities to determine if the SINK is actually an HDMI 2.0 device. The QD980B HDMI 2.0 Analyzer generates unique EDIDs during CTS tests that don't contain a HDMI Forum VSDB if the block is not used during the test. The current HDMI AVI infoframe code only uses the SCDC supported information in the HDMI Forum VSDB to determine if the sink is HDMI 2.0. This patch adds a check for YCbCr420 present in the EDID supported formats as well as the existing SCDC supported check. HDMI 2.0 CTS HF1-51 test fails on the QD980B. V2: Make check for display_info->color formats == YCbCR420 and SCDC Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107894 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1540415073-5102-1-git-send-email-clinton.a.taylor@intel.com
-
Chris Wilson authored
We need to serialise the addition of a new fence into the shared list such that the fence is visible before we claim it is there. Otherwise a concurrent reader of the shared fence list will see an uninitialised fence slot before it is set. <4> [109.613162] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [109.613177] CPU: 1 PID: 1357 Comm: gem_busy Tainted: G U 4.19.0-rc8-CI-CI_DRM_5035+ #1 <4> [109.613189] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011 <4> [109.613252] RIP: 0010:i915_gem_busy_ioctl+0x146/0x380 [i915] <4> [109.613261] Code: 0b 43 04 49 83 c6 08 4d 39 e6 89 43 04 74 6d 4d 8b 3e e8 5d 54 f4 e0 85 c0 74 0d 80 3d 08 71 1d 00 00 0f 84 bb 00 00 00 31 c0 <49> 81 7f 08 20 3a 2c a0 75 cc 41 8b 97 50 02 00 00 49 8b 8f a8 00 <4> [109.613283] RSP: 0018:ffffc9000044bcf8 EFLAGS: 00010246 <4> [109.613292] RAX: 0000000000000000 RBX: ffffc9000044bdc0 RCX: 0000000000000001 <4> [109.613302] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffffff822474a0 <4> [109.613311] RBP: ffffc9000044bd28 R08: ffff88021e158680 R09: 0000000000000001 <4> [109.613321] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88021e1641b8 <4> [109.613331] R13: 0000000000000003 R14: ffff88021e1641b0 R15: 6b6b6b6b6b6b6b6b <4> [109.613341] FS: 00007f9c9fc84980(0000) GS:ffff880227a40000(0000) knlGS:0000000000000000 <4> [109.613352] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [109.613360] CR2: 00007f9c9fcb8000 CR3: 00000002247d4005 CR4: 00000000000606e0 Fixes: 27836b64 ("dma-buf: remove shared fence staging in reservation object") Testcase: igt/gem_busy/close-race Signed-off-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181026080302.11507-1-chris@chris-wilson.co.uk
-
Chunming Zhou authored
drivers/gpu/drm/drm_syncobj.c:202:4-14: ERROR: function drm_syncobj_find_signal_pt_for_point called on line 390 inside lock on line 389 but uses GFP_KERNEL Find functions that refer to GFP_KERNEL but are called with locks held. Generated by: scripts/coccinelle/locks/call_kern.cocci v2: syncobj->timeline still needs protect. v3: use a global signaled fence instead of re-allocation. v4: Don't need moving lock. Don't expose func. v5: rename func and directly return. Tested by: syncobj_wait and ./deqp-vk -n dEQP-VK.*semaphore* with lock debug kernel options enabled. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
- 25 Oct, 2018 4 commits
-
-
Abhinav Kumar authored
Add the device tree bindings for Truly NT35597 panel driver. This panel driver supports both single DSI and dual DSI. However, this patch series supports only dual DSI. Changes in v10: - Remove active high in the documentation for mode gpio - Fix commmit text detail about the board and also fix a typo Reviewed-by:Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
-
Abhinav Kumar authored
Add support for Truly NT35597 panel driver used in MSM reference platforms. This panel driver supports both single DSI and dual DSI modes. However, this patch series adds support only for dual DSI mode. Changes in v10: - None Reviewed-by:
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. drm_fbdev_generic_setup() handles mode_config.num_connector being zero. In that case it retries fbdev setup on the next .output_poll_changed. Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-15-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-6-noralf@tronnes.org
-
