- 13 Aug, 2008 31 commits
-
-
David Chinner authored
Use the new completion flush code to implement the inode flush lock. Removes one of the final users of semaphores in the XFS code base. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31817a Signed-off-by:
David Chinner <david@fromorbit.com> Signed-off-by:
Lachlan McIlroy <lachlan@sgi.com>
-
David Chinner authored
XFS object flushing doesn't quite match existing completion semantics. It mixed exclusive access with completion. That is, we need to mark an object as being flushed before flushing it to disk, and then block any other attempt to flush it until the completion occurs. We do this but adding an extra count to the completion before we start using them. However, we still need to determine if there is a completion in progress, and allow no-blocking attempts fo completions to decrement the count. To do this we introduce: int try_wait_for_completion(struct completion *x) returns a failure status if done == 0, otherwise decrements done to zero and returns a "started" status. This is provided to allow counted completions to begin safely while holding object locks in inverted order. int completion_done(struct completion *x) returns 1 if there is no waiter, 0 if there is a waiter (i.e. a completion in progress). This replaces the use of semaphores for providing this exclusion and completion mechanism. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31816a Signed-off-by:
-
David Chinner authored
The xfs_buf_t b_iodonesema is really just a semaphore that wants to be a completion. Change it to a completion and remove the last user of the sema_t from XFS. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31815a Signed-off-by:
-
David Chinner authored
A lot of code has been converted away from semaphores, but there are still comments that reference semaphore behaviour. The log code is the worst offender. Update the comments to reflect what the code really does now. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31814a Signed-off-by:
-
Harvey Harrison authored
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31813a Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Lachlan McIlroy authored
SGI-PV: 957103 SGI-Modid: xfs-linux-melb:xfs-kern:31804a Signed-off-by: -
Christoph Hellwig authored
The alloc and inobt btree use the same agbp/agno pair in the btree_cur union. Make them use the same bc_private.a union member so that code for these two short form btree implementations can be shared. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31788a Signed-off-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Tim Shimmin <tes@sgi.com> Signed-off-by:
-
Christoph Hellwig authored
Remove unneeded xfs_btree_get_block forward declaration. Move xfs_btree_firstrec next to xfs_btree_lastrec. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31787a Signed-off-by:
-
Christoph Hellwig authored
Sanitize setting up the Linux indode. Setting up the xfs_inode <-> inode link is opencoded in xfs_iget_core now because that's the only place it needs to be done, xfs_initialize_vnode is renamed to xfs_setup_inode and loses all superflous paramaters. The check for I_NEW is removed because it always is true and the di_mode check moves into xfs_iget_core because it's only needed there. xfs_set_inodeops and xfs_revalidate_inode are merged into xfs_setup_inode and the whole things is moved into xfs_iops.c where it belongs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31782a Signed-off-by:
Niv Sardi <xaiki@sgi.com> Signed-off-by:
-
Christoph Hellwig authored
All remaining bhv_vnode_t instance are in code that's more or less Linux specific. (Well, for xfs_acl.c that could be argued, but that code is on the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the whole tree. We can clean up variable naming and some useless helpers later. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31781a Signed-off-by:
-
Christoph Hellwig authored
In various places we can just move a VFS_I call into the argument list of called functions/macros instead of having a local bhv_vnode_t. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31776a Signed-off-by:
-
Christoph Hellwig authored
When multiple inodes are locked in XFS it happens in order of the inode number, with the everything but the first inode trylocked if any of the previous inodes is in the AIL. Except for the sorting of the inodes this logic is implemented in xfs_lock_inodes, but also partially duplicated in xfs_lock_dir_and_entry in a particularly stupid way adds a lock roundtrip if the inode ordering is not optimal. This patch adds a new helper xfs_lock_two_inodes that takes two inodes and locks them in the most optimal way according to the above locking protocol and uses it for all places that want to lock two inodes. The only caller of xfs_lock_inodes is xfs_rename which might lock up to four inodes. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31772a Signed-off-by:
Donald Douwsma <donaldd@sgi.com> Signed-off-by:
-
Christoph Hellwig authored
All the error injection is already enabled through ifdef DEBUG, so kill the never set second cpp symbol to activate it without the rest of the debugging infrastructure. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31771a Signed-off-by:
-
Christoph Hellwig authored
Now that all direct calls to VN_HOLD/VN_RELE are gone we can implement IHOLD/IRELE directly. For the IHOLD case also replace igrab with a direct increment of i_count because we are guaranteed to already have a live and referenced inode by the VFS. Also remove the vn_hold statistic because it's been rather meaningless for some time with most references done by other callers. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31764a Signed-off-by:
-
Christoph Hellwig authored
Use IHOLD(ip) instead of VN_HOLD(VFS_I(ip)). SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31765a Signed-off-by:
-
Christoph Hellwig authored
All the ACL routines are called from inode operations which are guaranteed to have a referenced inode by the VFS, so there's no need for the ACL code to grab another temporary one. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31763a Signed-off-by:
-
Christoph Hellwig authored
bhv_vnode_t is just a typedef for struct inode, so there's no need for a helper to convert between the two. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31761a Signed-off-by:
-
Christoph Hellwig authored
bhv_vnode_t is just a typedef for struct inode, so there's no need for a helper to convert between the two. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31760a Signed-off-by:
-
Eric Sandeen authored
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31758a Signed-off-by:
Eric Sandeen <sandeen@sandeen.net> Signed-off-by:
-
Eric Sandeen authored
Looks like somehow xfs got missed in the conversion that took place in e231c2ee, "Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) <http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit diff;h=e231c2ee>" SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31757a Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Eric Sandeen authored
Thanks to hch's endian work, INT_GET etc are no longer used, and may as well be removed. INT_SET is still used in the acl code, though. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31756a Signed-off-by:
-
Niv Sardi authored
Move it from the attr code to the transaction code and make the attr code call the new function. We rolltrans is really usefull whenever we want to use rolling transaction, should be generic, it isn't dependent on any part of the attr code anyway. We use this excuse to change all the: if ((error = xfs_attr_rolltrans())) calls into: error = xfs_trans_roll(); if (error) SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31729a Signed-off-by:
-
Christoph Hellwig authored
Add a helper to free the m_fsname/m_rtname/m_logname allocations and use it properly for all mount failure cases. Also switch the allocations for these to kstrdup while we're at it. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31728a Signed-off-by:
-
Niv Sardi authored
We will need that to be able to calculate the size of log we need for a specific attr (for Create+EA). The local flag is needed so that we can fail if we run into ENOSPC when trying to alloc blocks. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31727a Signed-off-by:
-
David Chinner authored
If we allow incore extent tree allocations to recurse into the filesystem under memory pressure, new delayed allocations through xfs_iomap_write_delay() can deadlock on themselves if memory reclaim tries to write back dirty pages from that inode. It will deadlock in xfs_iomap_write_allocate() trying to take the ilock we already hold. This can also show up as complex ABBA deadlocks when multiple threads are triggering memory reclaim when trying to allocate extents. The main cause of this is the fact that delayed allocation is not done in a transaction, so KM_NOFS is not automatically added to the allocations to prevent this recursion. Mark all allocations done for the incore inode extent tree as KM_NOFS to ensure they never recurse back into the filesystem. Version 2: o KM_NOFS implies KM_SLEEP, so just use KM_NOFS SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31726a Signed-off-by:
-
David Chinner authored
xfs_vtoi() is redundant and only unsed in small sections of code. Replace them with widely used XFS_I() inline and kill xfs_vtoi(). SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31725a Signed-off-by:
-
David Chinner authored
Replace XFS_ITOV() with the new VFS_I() inline. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31724a Signed-off-by:
-
David Chinner authored
Replace XFS_ITOV_NULL() with the new VFS_I() inline. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31722a Signed-off-by:
-
David Chinner authored
In several places we directly convert from the XFS inode to the linux (VFS) inode by a simple deference of ip->i_vnode. We should not do this - a helper function should be used to extract the VFS inode from the XFS inode. Introduce the function VFS_I() to extract the VFS inode from the XFS inode. The name was chosen to match XFS_I() which is used to extract the XFS inode from the VFS inode. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31720a Signed-off-by:
-
Lachlan McIlroy authored
We should not access a buffer after dropping it's reference count otherwise we could race with another thread that releases the final reference count and frees the buffer causing us to access potentially unmapped memory. The bug this change fixes only occured on DEBUG XFS since the offending code was in an ASSERT. SGI-PV: 984429 SGI-Modid: xfs-linux-melb:xfs-kern:31715a Signed-off-by:
-
David Chinner authored
This keeps xfs_lowbit64 as it was since there aren't good generic helpers there ... Patch inspired by Andi Kleen. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31472a Signed-off-by:
-
- 11 Aug, 2008 9 commits
-
-
git://git.o-hand.com/linux-mfdLinus Torvalds authored
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: tc6393 cleanup and update mfd: have TMIO drivers and subdevices depend on ARM mfd: TMIO MMC driver mfd: driver for the TMIO NAND controller mfd: t7l66 MMC platform data mfd: tc6387 MMC platform data mfd: Fix 7l66 and 6387 according to the new mfd-core API mfd: Fix tc6393 according to the new tmio.h mfd: driver for the TC6387XB TMIO controller. mfd: driver for the T7L66XB TMIO SoC mfd: TMIO MMC structures and accessors.
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (lm75) Drop legacy i2c driver i2c: correct some size_t printk formats i2c: Check for address business before creating clients i2c: Let users select algorithm drivers manually again i2c: Fix NULL pointer dereference in i2c_new_probed_device i2c: Fix oops on bus multiplexer driver loading
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] pcwd.c - fix open_allowed type. [WATCHDOG] fix watchdog/ixp4xx_wdt.c compilation [WATCHDOG] fix watchdog/wdt285.c compilation [WATCHDOG] fix watchdog/at91rm9200_wdt.c compilation [WATCHDOG] fix watchdog/shwdt.c compilation [WATCHDOG] fix watchdog/txx9wdt.c compilation [WATCHDOG] MAINTAINERS: remove ZF MACHZ WATCHDOG entry [WATCHDOG] Fix build with CONFIG_ITCO_VENDOR_SUPPORT=n
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Remove include/linux/harrier_defs.h powerpc: Do not ignore arch/powerpc/include powerpc: Delete completed "ppc removal" task from feature removal file powerpc/mm: Fix attribute confusion with htab_bolt_mapping() powerpc/pci: Don't keep ISA memory hole resources in the tree powerpc: Zero fill the return values of rtas argument buffer powerpc/4xx: Update defconfig files for 2.6.27-rc1 powerpc/44x: Incorrect NOR offset in Warp DTS powerpc/44x: Warp DTS changes for board updates powerpc/4xx: Cleanup Warp for i2c driver changes. powerpc/44x: Adjust warp-nand resource end address
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Limit VPD length for Broadcom 5708S PCI PM: Export pci_pme_active to drivers PCI: remove duplicate symbol from pci_ids.h PCI: check the return value of device_create_bin_file() in pci_create_bus() PCI: fully restore MSI state at resume time DMA: make dma-coherent.c documentation kdoc-friendly PCI: make pci_register_driver() a macro PCI: add Broadcom 5708S to VPD length quirk
-
Christian Borntraeger authored
While testing our KVM code for s390 (starting and killall kvm in a loop) I can reproduce the following oops: Unable to handle kernel pointer dereference at virtual kernel address 6b6b6b6b6b6b6000 Oops: 0038 [#1] SMP Modules linked in: dm_multipath sunrpc qeth_l3 qeth_l2 dm_mod qeth ccwgroup CPU: 1 Not tainted 2.6.27-rc1 #54 Process kuli (pid: 4409, task: 00000000b6aa5940, ksp: 00000000b7343e10) Krnl PSW : 0704e00180000000 00000000002e0b8c (disassociate_ctty+0x1c0/0x288) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3 Krnl GPRS: 0000000000000000 6b6b6b6b6b6b6b6b 0000000000000001 00000000000003a6 00000000002e0a46 00000000004b4160 0000000000000001 00000000bbd79758 00000000b7343e58 00000000b8854148 00000000bd34dea0 00000000b7343c20 0000000000000001 00000000004b6d08 00000000002e0a46 00000000b7343c20 Krnl Code: 00000000002e0b7e: eb9fb0a00004 lmg %r9,%r15,160(%r11) 00000000002e0b84: 07f4 bcr 15,%r4 00000000002e0b86: e31090080004 lg %r1,8(%r9) >00000000002e0b8c: d501109cd000 clc 156(2,%r1),0(%r13) 00000000002e0b92: a784ff5d brc 8,2e0a4c 00000000002e0b96: b9040029 lgr %r2,%r9 00000000002e0b9a: c0e5fffff9c3 brasl %r14,2dff20 00000000002e0ba0: a7f4ff56 brc 15,2e0a4c Call Trace: ([<00000000002e0a46>] disassociate_ctty+0x7a/0x288) [<0000000000141fe6>] do_exit+0x212/0x8d4 [<0000000000142708>] do_group_exit+0x60/0xcc [<0000000000150660>] get_signal_to_deliver+0x270/0x3ac [<000000000010bfd6>] do_signal+0x8e/0x8dc [<0000000000113772>] sysc_sigpending+0xe/0x22 [<000001ff0000b134>] 0x1ff0000b134 INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000000002e0a48>] disassociate_ctty+0x7c/0x288 Kernel panic - not syncing: Fatal exception: panic_on_oops It seems that tty was already free in disassocate_ctty when it tries to dereference tty->driver. After moving the lock_kernel before the mutex_unlock, I can no longer reproduce the problem. [ This is a temporary partial fix for the documented and long standing race in disassociate_tty. This stops most problem cases for now. For the next release the -next tree has an initial implementation of kref counting for tty structures and this quickfix will be dropped. - Alan ] Signed-off-by:Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by; Alan Cox <alan@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Wire up for m68k{,nommu} the system calls that were added in the last merge window: - 4006553b ("flag parameters: inotify_init") - ed8cae8b ("flag parameters: pipe") - 336dd1f7 ("flag parameters: dup2") - a0998b50 ("flag parameters: epoll_create") - 9fe5ad9c ("flag parameters add-on: remove epoll_create size param") - b087498e ("flag parameters: eventfd") - 9deb27ba ("flag parameters: signalfd") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Linus Torvalds authored
This reverts commit 2d04a4a7, which made it impossible to make the softcursor use the highlight colors. Yes, the fourth bit should be "blinking", but since we cannot reasonably blink in fbcon, highlighting it with a bright background is preferable. Reported-by:
Pavel Machek <pavel@suse.cz> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Antonino A. Daplas <adaplas@pol.net> Signed-off-by:
-
Paul Mackerras authored
It was only used by code in arch/ppc, and arch/ppc is gone, so remove the unused harrier_defs.h as well. Signed-off-by:Paul Mackerras <paulus@samba.org>
-
