Implement netdev trigger and primitive bliking offloading as well as
simple set_brigthness function for both PHY LEDs of the in-SoC PHYs
found in MT7981 and MT7988.

For MT7988, read boottrap register and apply LED polarities accordingly
to get uniform behavior from all LEDs on MT7988.
This requires syscon phandle 'mediatek,pio' present in parenting MDIO bus
which should point to the syscon holding the boottrap register.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/dc324d48c00cd7350f3a506eaa785324cae97372.1691977904.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
nexthop: Various cleanups

Benefit from recent bug fixes and simplify the nexthop dump code.

No regressions in existing tests:

 # ./fib_nexthops.sh
 [...]
 Tests passed: 234
 Tests failed:   0
====================

Link: https://lore.kernel.org/r/20230813164856.2379822-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The nexthop and nexthop bucket dump callbacks previously returned a
positive return code even when the dump was complete, prompting the core
netlink code to invoke the callback again, until returning zero.

Zero was only returned by these callbacks when no information was filled
in the provided skb, which was achieved by incrementing the dump
sentinel at the end of the dump beyond the ID of the last nexthop.

This is no longer necessary as when the dump is complete these callbacks
return zero.

Remove the unnecessary increment.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230813164856.2379822-3-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Before commit f10d3d9d ("nexthop: Make nexthop bucket dump more
efficient"), rtm_dump_nexthop_bucket_nh() returned a non-zero return
code for each resilient nexthop group whose buckets it dumped,
regardless if it encountered an error or not.

This meant that the sentinel ('dd->ctx->nh.idx') used by the function
that walked the different nexthops could not be used as a sentinel for
the bucket dump, as otherwise buckets from the same group would be
dumped over and over again.

This was dealt with by adding another sentinel ('dd->ctx->done_nh_idx')
that was incremented by rtm_dump_nexthop_bucket_nh() after successfully
dumping all the buckets from a given group.

After the previously mentioned commit this sentinel is no longer
necessary since the function no longer returns a non-zero return code
when successfully dumping all the buckets from a given group.

Remove this sentinel and simplify the code.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230813164856.2379822-2-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Andrea Mayer says:

====================
seg6: add NEXT-C-SID support for SRv6 End.X behavior

In the Segment Routing (SR) architecture a list of instructions, called
segments, can be added to the packet headers to influence the forwarding and
processing of the packets in an SR enabled network.

Considering the Segment Routing over IPv6 data plane (SRv6) [1], the segment
identifiers (SIDs) are IPv6 addresses (128 bits) and the segment list (SID
List) is carried in the Segment Routing Header (SRH). A segment may correspond
to a "behavior" that is executed by a node when the packet is received.
The Linux kernel currently supports a large subset of the behaviors described
in [2] (e.g., End, End.X, End.T and so on).

In some SRv6 scenarios, the number of segments carried by the SID List may
increase dramatically, reducing the MTU (Maximum Transfer Unit) size and/or
limiting the processing power of legacy hardware devices (due to longer IPv6
headers).

The NEXT-C-SID mechanism [3] extends the SRv6 architecture by providing several
ways to efficiently represent the SID List.
By leveraging the NEXT-C-SID, it is possible to encode several SRv6 segments
within a single 128 bit SID address (also referenced as Compressed SID
Container). In this way, the length of the SID List can be drastically reduced.

The NEXT-C-SID mechanism is built upon the "flavors" framework defined in [2].
This framework is already supported by the Linux SRv6 subsystem and is used to
modify and/or extend a subset of existing behaviors.

In this patchset, we extend the SRv6 End.X behavior in order to support the
NEXT-C-SID mechanism.

In details, the patchset is made of:
 - patch 1/2: add NEXT-C-SID support for SRv6 End.X behavior;
 - patch 2/2: add selftest for NEXT-C-SID in SRv6 End.X behavior.

From the user space perspective, we do not need to change the iproute2 code to
support the NEXT-C-SID flavor for the SRv6 End.X behavior. However, we will
update the man page considering the NEXT-C-SID flavor applied to the SRv6 End.X
behavior in a separate patch.

[1] - https://datatracker.ietf.org/doc/html/rfc8754
[2] - https://datatracker.ietf.org/doc/html/rfc8986
[3] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
====================

Link: https://lore.kernel.org/r/20230812180926.16689-1-andrea.mayer@uniroma2.itSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This selftest is designed for testing the support of NEXT-C-SID flavor
for SRv6 End.X behavior. It instantiates a virtual network composed of
several nodes: hosts and SRv6 routers. Each node is realized using a
network namespace that is properly interconnected to others through veth
pairs, according to the topology depicted in the selftest script file.
The test considers SRv6 routers implementing IPv4/IPv6 L3 VPNs leveraged
by hosts for communicating with each other. Such routers i) apply
different SRv6 Policies to the traffic received from connected hosts,
considering the IPv4 or IPv6 protocols; ii) use the NEXT-C-SID
compression mechanism for encoding several SRv6 segments within a single
128-bit SID address, referred to as a Compressed SID (C-SID) container.

The NEXT-C-SID is provided as a "flavor" of the SRv6 End.X behavior,
enabling it to properly process the C-SID containers. The correct
execution of the enabled NEXT-C-SID SRv6 End.X behavior is verified
through reachability tests carried out between hosts belonging to the
same VPN.
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Co-developed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230812180926.16689-3-andrea.mayer@uniroma2.itSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The NEXT-C-SID mechanism described in [1] offers the possibility of
encoding several SRv6 segments within a single 128 bit SID address. Such
a SID address is called a Compressed SID (C-SID) container. In this way,
the length of the SID List can be drastically reduced.

A SID instantiated with the NEXT-C-SID flavor considers an IPv6 address
logically structured in three main blocks: i) Locator-Block; ii)
Locator-Node Function; iii) Argument.

                        C-SID container
+------------------------------------------------------------------+
|     Locator-Block      |Loc-Node|            Argument            |
|                        |Function|                                |
+------------------------------------------------------------------+
<--------- B -----------> <- NF -> <------------- A --------------->

   (i) The Locator-Block can be any IPv6 prefix available to the provider;

  (ii) The Locator-Node Function represents the node and the function to
       be triggered when a packet is received on the node;

 (iii) The Argument carries the remaining C-SIDs in the current C-SID
       container.

This patch leverages the NEXT-C-SID mechanism previously introduced in the
Linux SRv6 subsystem [2] to support SID compression capabilities in the
SRv6 End.X behavior [3].
An SRv6 End.X behavior with NEXT-C-SID flavor works as an End.X behavior
but it is capable of processing the compressed SID List encoded in C-SID
containers.

An SRv6 End.X behavior with NEXT-C-SID flavor can be configured to support
user-provided Locator-Block and Locator-Node Function lengths. In this
implementation, such lengths must be evenly divisible by 8 (i.e. must be
byte-aligned), otherwise the kernel informs the user about invalid
values with a meaningful error code and message through netlink_ext_ack.

If Locator-Block and/or Locator-Node Function lengths are not provided
by the user during configuration of an SRv6 End.X behavior instance with
NEXT-C-SID flavor, the kernel will choose their default values i.e.,
32-bit Locator-Block and 16-bit Locator-Node Function.

[1] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
[2] - https://lore.kernel.org/all/20220912171619.16943-1-andrea.mayer@uniroma2.it/
[3] - https://datatracker.ietf.org/doc/html/rfc8986#name-endx-l3-cross-connectSigned-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230812180926.16689-2-andrea.mayer@uniroma2.itSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jakub Kicinski says:

====================
genetlink: provide struct genl_info to dumps

One of the biggest (which is not to say only) annoyances with genetlink
handling today is that doit and dumpit need some of the same information,
but it is passed to them in completely different structs.

The implementations commonly end up writing a _fill() method which
populates a message and have to pass at least 6 parameters. 3 of which
are extracted manually from request info.

After a lot of umming and ahing I decided to populate struct genl_info
for dumps, without trying to factor out only the common parts.
This makes the adoption easiest.

In the future we may add a new version of dump which takes
struct genl_info *info as the second argument, instead of
struct netlink_callback *cb. For now developers have to call
genl_info_dump(cb) to get the info.

Typical genetlink families no longer get exposed to netlink protocol
internals like pid and seq numbers.

v3:
 - correct the condition in ethtool code (patch 10)
v2: https://lore.kernel.org/all/20230810233845.2318049-1-kuba@kernel.org/
 - replace the GENL_INFO_NTF() macro with init helper
 - fix the commit messages
v1: https://lore.kernel.org/all/20230809182648.1816537-1-kuba@kernel.org/
====================

Link: https://lore.kernel.org/r/20230814214723.2924989-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We had a number of bugs in the past because developers forgot
to fully test dumps, which pass NULL as info to .prepare_data.
.prepare_data implementations would try to access info->extack
leading to a null-deref.

Now that dumps and notifications can access struct genl_info
we can pass it in, and remove the info null checks.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # pause
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-11-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pass struct genl_info directly instead of its members.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-10-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the just added APIs to make the code simpler.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-9-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add some APIs and helpers required for convenient construction
of replies and notifications based on struct genl_info.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-8-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Having family in struct genl_info is quite useful. It cuts
down the number of arguments which need to be passed to
helpers which already take struct genl_info.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-7-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since dumps carry struct genl_info now, use the attrs pointer
from genl_info and remove the one in struct genl_dumpit_info.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-6-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Netlink GET implementations must currently juggle struct genl_info
and struct netlink_callback, depending on whether they were called
from doit or dumpit.

Add genl_info to the dump state and populate the fields.
This way implementations can simply pass struct genl_info around.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-5-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Only three families use info->userhdr today and going forward
we discourage using fixed headers in new families.
So having the pointer to user header in struct genl_info
is an overkill. Compute the header pointer at runtime.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-4-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

struct netlink_callback has a const nlh pointer, make the
pointer in struct genl_info const as well, to make copying
between the two easier.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-3-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add helpers which take/release the genl mutex based
on family->parallel_ops. Remove the separation between
handling of ops in locked and parallel families.

Future patches would make the duplicated code grow even more.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-2-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a phylink_get_caps implementation for Marvell 88e6060 DSA switch.
This is a fast ethernet switch, with internal PHYs for ports 0 through
4. Port 4 also supports MII, REVMII, REVRMII and SNI. Port 5 supports
MII, REVMII, REVRMII and SNI without an internal PHY.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1qUkx7-003dMX-9b@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jiri Pirko says:

====================
devlink: introduce selective dumps

Motivation:

For SFs, one devlink instance per SF is created. There might be
thousands of these on a single host. When a user needs to know port
handle for specific SF, he needs to dump all devlink ports on the host
which does not scale good.

Solution:

Allow user to pass devlink handle (and possibly other attributes)
alongside the dump command and dump only objects which are matching
the selection.

Use split ops to generate policies for dump callbacks acccording to
the attributes used for selection.

The userspace can use ctrl genetlink GET_POLICY command to find out if
the selective dumps are supported by kernel for particular command.

Example:
$ devlink port show
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false

$ devlink port show auxiliary/mlx5_core.eth.0
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false

$ devlink port show auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false

Extension:

patches #12 and #13 extends selection attributes by port index
for health reporter dumping.
====================

Link: https://lore.kernel.org/r/20230811155714.1736405-1-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Allow user to pass port index for health reporter dump request.

Re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-14-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce a possibility for devlink object to expose attributes it
supports for selection of dumped objects.

Use this by health reporter to indicate it supports port index based
selection of dump objects. Implement this selection mechanism in
devlink_nl_cmd_health_reporter_get_dump_one()

Example:
$ devlink health
pci/0000:08:00.0:
  reporter fw
    state healthy error 0 recover 0 auto_dump true
  reporter fw_fatal
    state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true
  reporter vnic
    state healthy error 0 recover 0
pci/0000:08:00.0/32768:
  reporter vnic
    state healthy error 0 recover 0
pci/0000:08:00.0/32769:
  reporter vnic
    state healthy error 0 recover 0
pci/0000:08:00.0/32770:
  reporter vnic
    state healthy error 0 recover 0
pci/0000:08:00.1:
  reporter fw
    state healthy error 0 recover 0 auto_dump true
  reporter fw_fatal
    state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true
  reporter vnic
    state healthy error 0 recover 0
pci/0000:08:00.1/98304:
  reporter vnic
    state healthy error 0 recover 0
pci/0000:08:00.1/98305:
  reporter vnic
    state healthy error 0 recover 0
pci/0000:08:00.1/98306:
  reporter vnic
    state healthy error 0 recover 0

$ devlink health show pci/0000:08:00.0
pci/0000:08:00.0:
  reporter fw
    state healthy error 0 recover 0 auto_dump true
  reporter fw_fatal
    state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true
  reporter vnic
    state healthy error 0 recover 0
pci/0000:08:00.0/32768:
  reporter vnic
    state healthy error 0 recover 0
pci/0000:08:00.0/32769:
  reporter vnic
    state healthy error 0 recover 0
pci/0000:08:00.0/32770:
  reporter vnic
    state healthy error 0 recover 0

$ devlink health show pci/0000:08:00.0/32768
pci/0000:08:00.0/32768:
  reporter vnic
    state healthy error 0 recover 0

The last command is possible because of this patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-13-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Extend per-instance dump command definitions to accept instance
attributes. Allow parsing of devlink handle attributes so they could
be used for instance selection.

Re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-12-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

For SFs, one devlink instance per SF is created. There might be
thousands of these on a single host. When a user needs to know port
handle for specific SF, he needs to dump all devlink ports on the host
which does not scale good.

Allow user to pass devlink handle attributes alongside the dump command
and dump only objects which are under selected devlink instance.

Example:
$ devlink port show
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false

$ devlink port show auxiliary/mlx5_core.eth.0
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false

$ devlink port show auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-11-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As the commands are already defined in split ops, remove them
from small ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-10-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove the duplicate temporary netlink callback prototype as the
generated ones are already in place.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-9-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add the definitions for the commands that do per-instance dump
and re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-8-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In order to easily set NLM_F_DUMP_FILTERED for partial dumps, pass the
flags as an arg of dump_one() callback. Currently, it is always
NLM_F_MULTI.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-7-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce dumpit callbacks for generated split ops. Have them
as a thin wrapper around iteration function and allow to pass dump_one()
function pointer directly without need to store in devlink_cmd structs.

Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-6-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rename netlink doit callback functions for the commands that do
implement per-instance dump to match the generated names that are going
to be introduce in the follow-up patch.

Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-5-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Define port handling helpers what don't rely on internal_flags.
Have __devlink_nl_pre_doit() to accept the flags as a function arg and
make devlink_nl_pre_doit() a wrapper helper function calling it.
Introduce new helpers devlink_nl_pre_doit_port() and
devlink_nl_pre_doit_port_optional() to be used by split ops in follow-up
patch.

Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-4-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No need to give the rate any special treatment in netlink attributes
parsing, as unlike for ports, there is only a couple of commands
benefiting from that.

Remove DEVLINK_NL_FLAG_NEED_RATE*, make pre_doit() callback simpler
by moving the rate attributes parsing to rate_*_doit() ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-3-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No need to give the linecards any special treatment in netlink attribute
parsing, as unlike for ports, there is only a couple of commands
benefiting from that.

Remove DEVLINK_NL_FLAG_NEED_LINECARD, make pre_doit() callback simpler
by moving the linecard attribute parsing to linecard_[gs]et_doit() ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-2-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The PSGMII interface is similar to QSGMII. The main difference
is that the PSGMII interface combines five SGMII lines into a
single link while in QSGMII only four lines are combined.

Similarly to the QSGMII, this interface mode might also needs
special handling within the MAC driver.

It is commonly used by Qualcomm with their QCA807x PHY series and
modern WiSoC-s.

Add definitions for the PHY layer to allow to express this type
of connection between the MAC and PHY.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new PSGMII mode which is similar to QSGMII with the difference being
that it combines 5 SGMII lines into a single link compared to 4 on QSGMII.

It is commonly used by Qualcomm on their QCA807x PHY series.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says:

====================
mlxsw: Support traffic redirection from a locked bridge port

Ido Schimmel writes:

It is possible to add a filter that redirects traffic from the ingress
of a bridge port that is locked (i.e., performs security / SMAC lookup)
and has learning enabled. For example:

 # ip link add name br0 type bridge
 # ip link set dev swp1 master br0
 # bridge link set dev swp1 learning on locked on mab on
 # tc qdisc add dev swp1 clsact
 # tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw src_ip 192.0.2.1 action mirred egress redirect dev swp2

In the kernel's Rx path, this filter is evaluated before the Rx handler
of the bridge, which means that redirected traffic should not be
affected by bridge port configuration such as learning.

However, the hardware data path is a bit different and the redirect
action (FORWARDING_ACTION in hardware) merely attaches a pointer to the
packet, which is later used by the L2 lookup stage to understand how to
forward the packet. Between both stages - ingress ACL and L2 lookup -
learning and security lookup are performed, which means that redirected
traffic is affected by bridge port configuration, unlike in the kernel's
data path.

The learning discrepancy was handled in commit 577fa14d ("mlxsw:
spectrum: Do not process learned records with a dummy FID") by simply
ignoring learning notifications generated by the redirected traffic. A
similar solution is not possible for the security / SMAC lookup since
- unlike learning - the CPU is not involved and packets that failed the
lookup are dropped by the device.

Instead, solve this by prepending the ignore action to the redirect
action and use it to instruct the device to disable both learning and
the security / SMAC lookup for redirected traffic.

Patch #1 adds the ignore action.

Patch #2 prepends the action to the redirect action in flower offload
code.

Patch #3 removes the workaround in commit 577fa14d ("mlxsw:
spectrum: Do not process learned records with a dummy FID") since it is
no longer needed.

Patch #4 adds a test case.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Check that traffic can be redirected from a locked bridge port and that
it does not create locked FDB entries.

Cc: Hans J. Schultz <netdev@kapio-technology.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As explained in the previous patch, with the ignore action prepended to
the redirect action, it is not longer possible for redirected traffic to
generate learning notifications.

Therefore, remove the workaround that was added in commit 577fa14d
("mlxsw: spectrum: Do not process learned records with a dummy FID") as
it is no longer needed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is possible to add a filter that redirects traffic from the ingress
of a bridge port that is locked (i.e., performs security / SMAC lookup)
and has learning enabled. For example:

 # ip link add name br0 type bridge
 # ip link set dev swp1 master br0
 # bridge link set dev swp1 learning on locked on mab on
 # tc qdisc add dev swp1 clsact
 # tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw src_ip 192.0.2.1 action mirred egress redirect dev swp2

In the kernel's Rx path, this filter is evaluated before the Rx handler
of the bridge, which means that redirected traffic should not be
affected by bridge port configuration such as learning.

However, the hardware data path is a bit different and the redirect
action (FORWARDING_ACTION in hardware) merely attaches a pointer to the
packet, which is later used by the L2 lookup stage to understand how to
forward the packet. Between both stages - ingress ACL and L2 lookup -
learning and security lookup are performed, which means that redirected
traffic is affected by bridge port configuration, unlike in the kernel's
data path.

The learning discrepancy was handled in commit 577fa14d ("mlxsw:
spectrum: Do not process learned records with a dummy FID") by simply
ignoring learning notifications generated by the redirected traffic. A
similar solution is not possible for the security / SMAC lookup since
- unlike learning - the CPU is not involved and packets that failed the
lookup are dropped by the device.

Instead, solve this by prepending the ignore action to the redirect
action and use it to instruct the device to disable both learning and
the security / SMAC lookup for redirected traffic.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the IGNORE_ACTION which is used to ignore basic switching functions
such as learning on a per-packet basis.

The action will be prepended to the FORWARDING_ACTION in subsequent
patches.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>