- 16 Jul, 2015 23 commits
-
-
Stephen Boyd authored
commit be081d9b upstream. John Stultz reported an RCU splat on ARM with ipi trace events enabled. It looks like the same problem exists on ARM64. At this point in the IPI handling path we haven't called irq_enter() yet, so RCU doesn't know that we're about to exit idle and properly warns that we're using RCU from an idle CPU. Use trace_ipi_entry_rcuidle() instead of trace_ipi_entry() so that RCU is informed about our exit from idle. Cc: John Stultz <john.stultz@linaro.org> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Reviewed-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Fixes: 45ed695a ("ARM64: add IPI tracepoints") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Michael Holzheu authored
commit 3c8e5105 upstream. The REGSET_VX_LOW ELF notes should contain the lower 64 bit halfes of the first sixteen 128 bit vector registers. Unfortunately currently we copy the upper halfes. Fix this and correctly copy the lower halfes. Fixes: a62bc073 ("s390/kdump: add support for vector extension") Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Alex Deucher authored
commit 650474fb upstream. Fixes audio problems on newer asics. Noticed by: Kelly Anderson <kelly@xilka.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Henningsson authored
commit ec56af67 upstream. Thinkpad X250, when attached to a dock, has two headphone outs but no line out. Make sure we don't try to turn this into one headphone and one line out (since that disables the headphone amp on the dock). Alsa-info at http://www.alsa-project.org/db/?f=36f8764e1d782397928feec715d0ef90dfddd4c1Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Pali Rohár authored
commit b8830a4e upstream. This commit fix kernel crash when probing for rfkill devices in dell-laptop driver failed. Function free_page() was incorrectly used on struct page * instead of virtual address of SMI buffer. This commit also simplify allocating page for SMI buffer by using __get_free_page() function instead of sequential call of functions alloc_page() and page_address(). Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Dave Airlie authored
commit 6b8eeca6 upstream. I've only seen this once, and I failed to capture the lockdep backtrace, but I did some investigations. If we are calling into the MST layer from EDID probing, we have the mode_config mutex held, if during that EDID probing, the MST hub goes away, then we can get a deadlock where the connector destruction function in the driver tries to retake the mode config mutex. This offloads connector destruction to a workqueue, and avoid the subsequenct lock ordering issue. Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Larry Finger authored
commit 8a8c35fa upstream. Beginning at commit d52d3997 ("ipv6: Create percpu rt6_info"), the following INFO splat is logged: =============================== [ INFO: suspicious RCU usage. ] 4.1.0-rc7-next-20150612 #1 Not tainted ------------------------------- kernel/sched/core.c:7318 Illegal context switch in RCU-bh read-side critical section! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 3 locks held by systemd/1: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815f0c8f>] rtnetlink_rcv+0x1f/0x40 #1: (rcu_read_lock_bh){......}, at: [<ffffffff816a34e2>] ipv6_add_addr+0x62/0x540 #2: (addrconf_hash_lock){+...+.}, at: [<ffffffff816a3604>] ipv6_add_addr+0x184/0x540 stack backtrace: CPU: 0 PID: 1 Comm: systemd Not tainted 4.1.0-rc7-next-20150612 #1 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.20 04/17/2014 Call Trace: dump_stack+0x4c/0x6e lockdep_rcu_suspicious+0xe7/0x120 ___might_sleep+0x1d5/0x1f0 __might_sleep+0x4d/0x90 kmem_cache_alloc+0x47/0x250 create_object+0x39/0x2e0 kmemleak_alloc_percpu+0x61/0xe0 pcpu_alloc+0x370/0x630 Additional backtrace lines are truncated. In addition, the above splat is followed by several "BUG: sleeping function called from invalid context at mm/slub.c:1268" outputs. As suggested by Martin KaFai Lau, these are the clue to the fix. Routine kmemleak_alloc_percpu() always uses GFP_KERNEL for its allocations, whereas it should follow the gfp from its callers. Reviewed-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Catalin Marinas authored
commit c5f3b1a5 upstream. The kmemleak scanning thread can run for minutes. Callbacks like kmemleak_free() are allowed during this time, the race being taken care of by the object->lock spinlock. Such lock also prevents a memory block from being freed or unmapped while it is being scanned by blocking the kmemleak_free() -> ... -> __delete_object() function until the lock is released in scan_object(). When a kmemleak error occurs (e.g. it fails to allocate its metadata), kmemleak_enabled is set and __delete_object() is no longer called on freed objects. If kmemleak_scan is running at the same time, kmemleak_free() no longer waits for the object scanning to complete, allowing the corresponding memory block to be freed or unmapped (in the case of vfree()). This leads to kmemleak_scan potentially triggering a page fault. This patch separates the kmemleak_free() enabling/disabling from the overall kmemleak_enabled nob so that we can defer the disabling of the object freeing tracking until the scanning thread completed. The kmemleak_free_part() is deliberately ignored by this patch since this is only called during boot before the scanning thread started. Signed-off-by:
Vignesh Radhakrishnan <vigneshr@codeaurora.org> Tested-by:
-
Vineet Gupta authored
commit 2576c28e upstream. - arch_spin_lock/unlock were lacking the ACQUIRE/RELEASE barriers Since ARCv2 only provides load/load, store/store and all/all, we need the full barrier - LLOCK/SCOND based atomics, bitops, cmpxchg, which return modified values were lacking the explicit smp barriers. - Non LLOCK/SCOND varaints don't need the explicit barriers since that is implicity provided by the spin locks used to implement the critical section (the spin lock barriers in turn are also fixed in this commit as explained above Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Vineet Gupta authored
commit d57f7272 upstream. When auditing cmpxchg call sites, Chuck noted that gcc was optimizing away some of the desired LDs. | do { | new = old = *ipi_data_ptr; | new |= 1U << msg; | } while (cmpxchg(ipi_data_ptr, old, new) != old); was generating to below | 8015cef8: ld r2,[r4,0] <-- First LD | 8015cefc: bset r1,r2,r1 | | 8015cf00: llock r3,[r4] <-- atomic op | 8015cf04: brne r3,r2,8015cf10 | 8015cf08: scond r1,[r4] | 8015cf0c: bnz 8015cf00 | | 8015cf10: brne r3,r2,8015cf00 <-- Branch doesn't go to orig LD Although this was fixed by adding a ACCESS_ONCE in this call site, it seems safer (for now at least) to add compiler barrier to LLSC based cmpxchg Reported-by:
Chuck Jordan <cjordan@synopsys,com> Acked-by:
-
Stefan Agner authored
commit 119434f4 upstream. When entering suspend while an wakeup alarm is set, enable_set_wake should make sure that the RTC interrupt keep being enabled and the .irq_set_wake for the RTC interrupt get called. However, since the driver uses the suspend_noirq callback, the call to enable_irq_wake has been made after disabling the interrupts. While .irq_set_wake has been called properly, the interrupt remained disabled. Use the suspend callback to call enable_irq_wake early enough to ensure the RTC interrupt remains enabled. Fixes: 7654e9d4 ("drivers/rtc/rtc-snvs: fix suspend/resume") Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Takashi Iwai authored
commit fff3b16d upstream. Many harddisks (mostly WD ones) have firmware problems and take too long, more than 10 seconds, to resume from suspend. And this often exceeds the default DPM watchdog timeout (12 seconds), resulting in a kernel panic out of sudden. Since most distros just take the default as is, we should give a bit more safer value. This patch increases the default value from 12 seconds to one minute, which has been confirmed to be long enough for such problematic disks. Link: https://bugzilla.kernel.org/show_bug.cgi?id=91921 Fixes: 70fea60d (PM / Sleep: Detect device suspend/resume lockup and log event) Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dan Carpenter authored
commit 7bc10388 upstream. There is a small memory leak on error. Fixes: 0f1b414d (ACPI / PNP: Avoid conflicting resource reservations) Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alexey Brodkin authored
commit f1590670 upstream. Current implementation of descriptor init procedure only takes care about setting/clearing ownership flag in "des0"/"des1" fields while it is perfectly possible to get unexpected bits set because of the following factors: [1] On driver probe underlying memory allocated with dma_alloc_coherent() might not be zeroed and so it will be filled with garbage. [2] During driver operation some bits could be set by SD/MMC controller (for example error flags etc). And unexpected and/or randomly set flags in "des0"/"des1" fields may lead to unpredictable behavior of GMAC DMA block. This change addresses both items above with: [1] Use of dma_zalloc_coherent() instead of simple dma_alloc_coherent() to make sure allocated memory is zeroed. That shouldn't affect performance because this allocation only happens once on driver probe. [2] Do explicit zeroing of both "des0" and "des1" fields of all buffer descriptors during initialization of DMA transfer. And while at it fixed identation of dma_free_coherent() counterpart as well. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: arc-linux-dev@synopsys.com Cc: linux-kernel@vger.kernel.org Cc: David Miller <davem@davemloft.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jan Kara authored
commit 2426f391 upstream. file_remove_suid() could mistakenly set S_NOSEC inode bit when root was modifying the file. As a result following writes to the file by ordinary user would avoid clearing suid or sgid bits. Fix the bug by checking actual mode bits before setting S_NOSEC. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jingoo Han authored
commit 294240ff upstream. When kzalloc() is called under spin_lock(), GFP_ATOMIC should be used to avoid sleeping allocation. The call tree is: of_pci_range_to_resource() --> pci_register_io_range() <-- takes spin_lock(&io_range_lock); --> kzalloc() Signed-off-by:
Jingoo Han <jingoohan1@gmail.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Eric W. Biederman authored
commit 8405a8ff upstream. Add code to nf_unregister_hook to flush the nf_queue when a hook is unregistered. This guarantees that the pointer that the nf_queue code retains into the nf_hook list will remain valid while a packet is queued. I tested what would happen if we do not flush queued packets and was trivially able to obtain the oops below. All that was required was to stop the nf_queue listening process, to delete all of the nf_tables, and to awaken the nf_queue listening process. > BUG: unable to handle kernel paging request at 0000000100000001 > IP: [<0000000100000001>] 0x100000001 > PGD b9c35067 PUD 0 > Oops: 0010 [#1] SMP > Modules linked in: > CPU: 0 PID: 519 Comm: lt-nfqnl_test Not tainted > task: ffff8800b9c8c050 ti: ffff8800ba9d8000 task.ti: ffff8800ba9d8000 > RIP: 0010:[<0000000100000001>] [<0000000100000001>] 0x100000001 > RSP: 0018:ffff8800ba9dba40 EFLAGS: 00010a16 > RAX: ffff8800bab48a00 RBX: ffff8800ba9dba90 RCX: ffff8800ba9dba90 > RDX: ffff8800b9c10128 RSI: ffff8800ba940900 RDI: ffff8800bab48a00 > RBP: ffff8800b9c10128 R08: ffffffff82976660 R09: ffff8800ba9dbb28 > R10: dead000000100100 R11: dead000000200200 R12: ffff8800ba940900 > R13: ffffffff8313fd50 R14: ffff8800b9c95200 R15: 0000000000000000 > FS: 00007fb91fc34700(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 0000000100000001 CR3: 00000000babfb000 CR4: 00000000000007f0 > Stack: > ffffffff8206ab0f ffffffff82982240 ffff8800bab48a00 ffff8800b9c100a8 > ffff8800b9c10100 0000000000000001 ffff8800ba940900 ffff8800b9c10128 > ffffffff8206bd65 ffff8800bfb0d5e0 ffff8800bab48a00 0000000000014dc0 > Call Trace: > [<ffffffff8206ab0f>] ? nf_iterate+0x4f/0xa0 > [<ffffffff8206bd65>] ? nf_reinject+0x125/0x190 > [<ffffffff8206dee5>] ? nfqnl_recv_verdict+0x255/0x360 > [<ffffffff81386290>] ? nla_parse+0x80/0xf0 > [<ffffffff8206c42c>] ? nfnetlink_rcv_msg+0x13c/0x240 > [<ffffffff811b2fec>] ? __memcg_kmem_get_cache+0x4c/0x150 > [<ffffffff8206c2f0>] ? nfnl_lock+0x20/0x20 > [<ffffffff82068159>] ? netlink_rcv_skb+0xa9/0xc0 > [<ffffffff820677bf>] ? netlink_unicast+0x12f/0x1c0 > [<ffffffff82067ade>] ? netlink_sendmsg+0x28e/0x650 > [<ffffffff81fdd814>] ? sock_sendmsg+0x44/0x50 > [<ffffffff81fde07b>] ? ___sys_sendmsg+0x2ab/0x2c0 > [<ffffffff810e8f73>] ? __wake_up+0x43/0x70 > [<ffffffff8141a134>] ? tty_write+0x1c4/0x2a0 > [<ffffffff81fde9f4>] ? __sys_sendmsg+0x44/0x80 > [<ffffffff823ff8d7>] ? system_call_fastpath+0x12/0x6a > Code: Bad RIP value. > RIP [<0000000100000001>] 0x100000001 > RSP <ffff8800ba9dba40> > CR2: 0000000100000001 > ---[ end trace 08eb65d42362793f ]--- Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Ralf Baechle authored
commit d496f784 upstream. A ROSE socket doesn't necessarily always have a neighbour pointer so check if the neighbour pointer is valid before dereferencing it. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Tested-by:
Bernard Pidoux <f6bvp@free.fr> Signed-off-by:
-
Dave Airlie authored
commit 9eb1e57f upstream. If we are doing an MST transaction and we've gotten HPD and we lookup the device from the incoming msg, we should take the mgr lock around it, so that mst_primary and mstb->ports are valid. Reviewed-by:
-
Daniel Vetter authored
commit 9254ec49 upstream. This validates the mst_primary under the lock, and then calls into the check and send function. This makes the code a lot easier to understand the locking rules in. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
-
Darrick J. Wong authored
commit 292db1bc upstream. ext4 isn't willing to map clusters to a non-extent file. Don't signal this with an out of space error, since the FS will retry the allocation (which didn't fail) forever. Instead, return EUCLEAN so that the operation will fail immediately all the way back to userspace. (The fix is either to run e2fsck -E bmap2extent, or to chattr +e the file.) Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Eric Sandeen authored
commit 2ac56d3d upstream. If we create a CRC filesystem, mount it, and create a symlink with a path long enough that it can't live in the inode, we get a very strange result upon remount: # ls -l mnt total 4 lrwxrwxrwx. 1 root root 929 Jun 15 16:58 link -> XSLM XSLM is the V5 symlink block header magic (which happens to be followed by a NUL, so the string looks terminated). xfs_readlink_bmap() advanced cur_chunk by the size of the header for CRC filesystems, but never actually used that pointer; it kept reading from bp->b_addr, which is the start of the block, rather than the start of the symlink data after the header. Looks like this problem goes back to v3.10. Fixing this gets us reading the proper link target, again. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
James Hogan authored
commit 8e748c8d upstream. KVM guest kernels for trap & emulate run in user mode, with a modified set of kernel memory segments. However the fixmap address is still in the normal KSeg3 region at 0xfffe0000 regardless, causing problems when cache alias handling makes use of them when handling copy on write. Therefore define FIXADDR_TOP as 0x7ffe0000 in the guest kernel mapped region when CONFIG_KVM_GUEST is defined. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9887/Signed-off-by:
-
- 15 Jul, 2015 17 commits
-
-
Theodore Ts'o authored
commit 89d96a6f upstream. Normally all of the buffers will have been forced out to disk before we call invalidate_bdev(), but there will be some cases, where a file system operation was aborted due to an ext4_error(), where there may still be some dirty buffers in the buffer cache for the device. So try to force them out to memory before calling invalidate_bdev(). This fixes a warning triggered by generic/081: WARNING: CPU: 1 PID: 3473 at /usr/projects/linux/ext4/fs/block_dev.c:56 __blkdev_put+0xb5/0x16f() Signed-off-by:
-
Joerg Roedel authored
commit 0b3fff54 upstream. Make sure that we are skipping over large PTEs while walking the page-table tree. Fixes: 5c34c403 ("iommu/amd: Fix memory leak in free_pagetable") Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Will Deacon authored
commit 6f1a6ae8 upstream. When building the kernel with a bare-metal (ELF) toolchain, the -shared option may not be passed down to collect2, resulting in silent corruption of the vDSO image (in particular, the DYNAMIC section is omitted). The effect of this corruption is that the dynamic linker fails to find the vDSO symbols and libc is instead used for the syscalls that we intended to optimise (e.g. gettimeofday). Functionally, there is no issue as the sigreturn trampoline is still intact and located by the kernel. This patch fixes the problem by explicitly passing -shared to the linker when building the vDSO. Reported-by:
Szabolcs Nagy <Szabolcs.Nagy@arm.com> Reported-by:
James Greenlaigh <james.greenhalgh@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Martin K. Petersen authored
commit 243918be upstream. Queued TRIM got disabled on Micron M500DC drives thanks to the "Micron_M500*" pattern we had in place to accommodate the previous generation of this drive family. Tweak the blacklist entry slightly so we only disable queued TRIM for the non-DC variants of M500 drives. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Dmitry Tunin authored
commit 7e730c7f upstream. BugLink: https://bugs.launchpad.net/bugs/1394368 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=300d Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Dmitry Tunin authored
commit ec0810d2 upstream. BugLink: https://bugs.launchpad.net/bugs/1449730 T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=300f Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
-
Rafael J. Wysocki authored
commit 0f1b414d upstream. Commit b9a5e5e1 "ACPI / init: Fix the ordering of acpi_reserve_resources()" overlooked the fact that the memory and/or I/O regions reserved by acpi_reserve_resources() may conflict with those reserved by the PNP "system" driver. If that conflict actually takes place, it causes the reservations made by the "system" driver to fail while before commit b9a5e5e1 all reservations made by it and by acpi_reserve_resources() would be successful. In turn, that allows the resources that haven't been reserved by the "system" driver to be used by others (e.g. PCI) which sometimes leads to functional problems (up to and including boot failures). To fix that issue, introduce a common resource reservation routine, acpi_reserve_region(), to be used by both acpi_reserve_resources() and the "system" driver, that will track all resources reserved by it and avoid making conflicting requests. Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831 Link: http://marc.info/?t=143389402600001&r=1&w=2 Fixes: b9a5e5e1 "ACPI / init: Fix the ordering of acpi_reserve_resources()" Reported-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Trond Myklebust authored
commit c7070113 upstream. If a write attempt fails, and the write is queued up for resending to the server, as opposed to being dropped, then we need to set the appropriate flag so that nfs_file_fsync() does the right thing. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 1ca018d2 upstream. pnfs_do_write() expects the call to pnfs_write_through_mds() to free the pgio header and to release the layout segment before exiting. The problem is that nfs_pgio_data_destroy() doesn't actually do this; it only frees the memory allocated by nfs_generic_pgio(). Ditto for pnfs_do_read()... Fix in both cases is to add a call to hdr->release(hdr). Signed-off-by:
-
Bjorn Helgaas authored
commit 3d9fecf6 upstream. We enable _CRS on all systems from 2008 and later. On older systems, we ignore _CRS and assume the whole physical address space (excluding RAM and other devices) is available for PCI devices, but on systems that support physical address spaces larger than 4GB, it's doubtful that the area above 4GB is really available for PCI. After d56dbf5b ("PCI: Allocate 64-bit BARs above 4G when possible"), we try to use that space above 4GB *first*, so we're more likely to put a device there. On Juan's Toshiba Satellite Pro U200, BIOS left the graphics, sound, 1394, and card reader devices unassigned (but only after Windows had been booted). Only the sound device had a 64-bit BAR, so it was the only device placed above 4GB, and hence the only device that didn't work. Keep _CRS enabled even on pre-2008 systems if they support physical address space larger than 4GB. Fixes: d56dbf5b ("PCI: Allocate 64-bit BARs above 4G when possible") Reported-and-tested-by:
Juan Dayer <jdayer@outlook.com> Reported-and-tested-by:
Alan Horsfield <alan@hazelgarth.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=99221 Link: https://bugzilla.opensuse.org/show_bug.cgi?id=907092Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Mikulas Patocka authored
commit dd4c1b7d upstream. If the number_of_areas argument was zero the kernel would crash on div-by-zero. Add better input validation. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 2f5bc307 upstream. The current Armada XP suspend to RAM implementation, as added in commit 27432825 ("ARM: mvebu: Armada XP GP specific suspend/resume code") does not handle big-endian configurations properly: the small bit of assembly code putting the DRAM in self-refresh and toggling the GPIOs to turn off power forgets to convert the values to little-endian. This commit fixes that by making sure the two values we will write to the DRAM controller register and GPIO register are already in little-endian before entering the critical assembly code. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: 27432825 ("ARM: mvebu: Armada XP GP specific suspend/resume code") Signed-off-by:
-
Marc Zyngier authored
commit 4839ddc2 upstream. Commit fd1d0ddf (KVM: arm/arm64: check IRQ number on userland injection) rightly limited the range of interrupts userspace can inject in a guest, but failed to consider the (unlikely) case where a guest is configured with 1024 interrupts. In this case, interrupts ranging from 1020 to 1023 are unuseable, as they have a special meaning for the GIC CPU interface. Make sure that these number cannot be used as an IRQ. Also delete a redundant (and similarily buggy) check in kvm_set_irq. Reported-by:
Peter Maydell <peter.maydell@linaro.org> Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> [ kamal: backport to 3.19-stable: no change to kvm_set_irq ] Signed-off-by:
-
Joe Thornber authored
commit 6096d91a upstream. The metadata space map has a simplified 'bootstrap' mode that is operational when extending the space maps. Whilst in this mode it's possible for some refcount decrement operations to become queued (eg, as a result of shadowing one of the bitmap indexes). These decrements were not being applied when switching out of bootstrap mode. The effect of this bug was the leaking of a 4k metadata block. This is detected by the latest version of thin_check as a non fatal error. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Dave P Martin authored
commit b9bcc919 upstream. The memmap freeing code in free_unused_memmap() computes the end of each memblock by adding the memblock size onto the base. However, if SPARSEMEM is enabled then the value (start) used for the base may already have been rounded downwards to work out which memmap entries to free after the previous memblock. This may cause memmap entries that are in use to get freed. In general, you're not likely to hit this problem unless there are at least 2 memblocks and one of them is not aligned to a sparsemem section boundary. Note that carve-outs can increase the number of memblocks by splitting the regions listed in the device tree. This problem doesn't occur with SPARSEMEM_VMEMMAP, because the vmemmap code deals with freeing the unused regions of the memmap instead of requiring the arch code to do it. This patch gets the memblock base out of the memblock directly when computing the block end address to ensure the correct value is used. Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
-
Alexander Sverdlin authored
commit 0a8237ae upstream. pca9541 and pca954x are calling master_xfer() of the parent adapter directly thus bypassing the quirks checks of the adapter. Use __i2c_transfer() instead. Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by:
Łukasz Gemborowski <lukasz.gemborowski@nokia.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Jisheng Zhang <jszhang@marvell.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Fixes: b7f62584 ("i2c: add quirk checks to core") Signed-off-by:
-
Alexander Sverdlin authored
commit e766f338 upstream. Newly introduced quirks infrastructure doesn't work for the devices behind MUXes because MUX's master_xfer() calls parent's master_xfer() directly without checking the quirks. Instead of duplicating check code in MUX just call __i2c_transfer() instead. This has a side effect on tracing (messages will appear on both MUX bus and parent bus), but maybe that's not bad at the end. Signed-off-by:
-
