- 30 Sep, 2021 40 commits
-
-
Deborah Brouwer authored
Currently, the vivid emulation of cec message transmission does not force adapters to wait until the cec bus has been signal-free for a certain number of bit periods before transmitting or re-transmitting a message. Without enforcing the signal-free time requirements, adapters do not share the bus very well and some messages are sent too quickly while other messages are lost. By emulating a signal-free time and forcing adapters to wait their turn to transmit, the vivid emulation of cec transmission is much more reliable. Signed-off-by:
Deborah Brouwer <deborahbrouwer3563@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Ezequiel Garcia authored
The Request API is currently used and specified as part of the Memory-to-memory Stateless Video Decoder Interface [1]. This can now be considered as non-experimental and stable, given the decoder API has been used by products since a couple years, supported by several drivers and userspace frameworks, [1] Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Cai Huoqing authored
remove it because SPDX-License-Identifier is already used Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Akihiro Tsukada <tskd08@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. No memory allocation in involved in this patch, so no GFP_ tweak is needed. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
Christophe JAILLET authored
A successful 'mxc_jpeg_attach_pm_domains()' call should be balanced by a corresponding 'mxc_jpeg_detach_pm_domains()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: 2db16c6e ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Signed-off-by:
-
Christophe JAILLET authored
A successful 'clk_prepare()' call should be balanced by a corresponding 'clk_unprepare()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: 3003a180 ("[media] VPU: mediatek: support Mediatek VPU") Signed-off-by:
Houlong Wei <houlong.wei@mediatek.com> Signed-off-by:
-
Tom Rix authored
Static analysis reports this representative problem camss-vfe-4-1.c:333: The result of the left shift is undefined because the left operand is negative reg |= (height - 1) << 4; ~~~~~~~~~ ^ The is a false positive. height is set in vfe_get_wm_sizes() which has a switch statement without a default. Reviewing the switch, the cases contain redundant assignments. So simplify to assignments. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Nil Yi authored
After urb was freed, the pointer and counter need to be cleaned. Signed-off-by:
Nil Yi <teroincn@163.com> Signed-off-by:
-
Tom Rix authored
Static analysis reports this representative problem tda1997x.c:1939: warning: 7th function call argument is an uninitialized value The 7th argument is buffer[0], which is set in the earlier call to io_readn(). When io_readn() call to io_read() fails with the first read, buffer[0] is not set and 0 is returned and stored in len. The later call to hdmi_infoframe_unpack()'s size parameter is the static size of buffer, always 40, so a short read is not caught in hdmi_infoframe_unpacks()'s checking. The variable len should be used instead. Zero initialize buffer to 0 so it is in a known start state. Fixes: 9ac0038d ("media: i2c: Add TDA1997x HDMI receiver driver") Signed-off-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
-
Nadezda Lutovinova authored
If of_device_get_match_data() return NULL, then null pointer dereference occurs in s5p_mfc_init_pm(). The patch adds checking if dev->variant is NULL. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Nadezda Lutovinova <lutovinova@ispras.ru> Signed-off-by:
-
Hans Verkuil authored
The CEC pin framework has to wait for the CEC bus to be idle for the requested Signal Free Time before it can start a transmit. However, the check for that was off by one, so transmits would start one bit period (2.4ms) too late. Signed-off-by:
-
Tuo Li authored
The variable pdev is assigned to dev->plat_dev, and dev->plat_dev is checked in: if (!dev->plat_dev) This indicates both dev->plat_dev and pdev can be NULL. If so, the function dev_err() is called to print error information. dev_err(&pdev->dev, "No platform data specified\n"); However, &pdev->dev is an illegal address, and it is dereferenced in dev_err(). To fix this possible null-pointer dereference, replace dev_err() with mfc_err(). Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Tuo Li <islituo@gmail.com> Signed-off-by:
-
Zev Weiss authored
As partially addressed in commit 65d270ac ("media: aspeed: clear garbage interrupts"), the ASpeed video engine sometimes asserts interrupts that the driver hasn't enabled. In addition to the CAPTURE_COMPLETE and FRAME_COMPLETE interrupts dealt with in that patch, COMP_READY has also been observed. Instead of playing whack-a-mole with each one individually, we can instead just blanket ignore everything we haven't explicitly enabled. Signed-off-by:
Zev Weiss <zev@bewilderbeest.net> Tested-by:
Lei YU <yulei.sh@bytedance.com> Signed-off-by:
-
Dan Carpenter authored
The bounds checking in avc_ca_pmt() is not strict enough. It should be checking "read_pos + 4" because it's reading 5 bytes. If the "es_info_length" is non-zero then it reads a 6th byte so there needs to be an additional check for that. I also added checks for the "write_pos". I don't think these are required because "read_pos" and "write_pos" are tied together so checking one ought to be enough. But they make the code easier to understand for me. The check on write_pos is: if (write_pos + 4 >= sizeof(c->operand) - 4) { The first "+ 4" is because we're writing 5 bytes and the last " - 4" is to leave space for the CRC. The other problem is that "length" can be invalid. It comes from "data_length" in fdtv_ca_pmt(). Cc: stable@vger.kernel.org Reported-by:Luo Likang <luolikang@nsfocus.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
lijian authored
Macros should not use a trailing semicolon，and it was used the semicolon after macro cam_dbg called in viacam_vb2_prepare, so deleted these redundant semicolons. Signed-off-by:
lijian <lijian@yulong.com> Signed-off-by:
-
Dafna Hirschfeld authored
In case vb2ops_venc_start_streaming fails, the error value is overwritten by the ret value of pm_runtime_put which might be 0. Fix it. Fixes: 985c7369 (" media: mtk-vcodec: Separating mtk encoder driver") Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by:
-
Liu Shixin authored
It looks like that memcpy() is a superfluous operation in parse_token()/parse_mtoken(). Simple these two functions and use kstrtoint() instead of simple_strtol() to avoid data overflow. Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Signed-off-by:
-
Evgeny Novikov authored
vidtv_bridge_remove() releases and cleans up everything except for dvb itself. The patch adds this missed release. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_get_and_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately. Signed-off-by:
Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
