- 03 Feb, 2023 11 commits
-
-
Alex Deucher authored
This reverts commit 1a65327a. This should be resolved so we can re-enable this. Also, the AGP apeture was bring programmed to 0 on MMHUB 3.0.1 since agp_start and end were not being set. Acked-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Take into account whether or not the AGP aperture is enabled or not when calculating the system aperture. Fixes white screens with DCN 3.1.4. Based on a patch from Yifan Zhang <yifan1.zhang@amd.com> Cc: Yifan Zhang <yifan1.zhang@amd.com> Acked-by:
-
Alex Deucher authored
Causes flickering or white screens in some configurations. Disable it for now until we can fix the issue. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2352 Cc: roman.li@amd.com Cc: yifan1.zhang@amd.com Reviewed-by:
-
Alex Deucher authored
Causes flickering or white screens in some configurations. Disable it for now until we can fix the issue. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2352 Cc: roman.li@amd.com Cc: yifan1.zhang@amd.com Reviewed-by:
-
Yifan Zha authored
[Why] Accessing GRBM_GFX_CNTL in full access time has risk when VF is doing MMIO attacking. Therefore, VF writing GRBM_GFX_CNTL are blocked by L1 Policy. For RLCG interface, RLCG use SCRATCH_REG2 which is copied from GRBM_GFX_CNTL. [How] Remove writing GRBM_GFX_CNTL in amdgpu_virt_rlcg_reg_rw. v2: Remove directly writing GRBM_GFX_INDEX in amdgpu_virt_rlcg_reg_rw as RLCG interface no need to use it. Signed-off-by:
Yifan Zha <Yifan.Zha@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Vitaly Prosyak authored
We allow sending PSP messages LOAD_ASD and UNLOAD_TA without acquiring a lock in drm_dev_enter during driver unload because we must call drm_dev_unplug as the beginning of unload driver sequence. Added WARNING if other PSP messages are sent without a lock. After this commit, the following commands would work -sudo modprobe -r amdgpu -sudo modprobe amdgpu Signed-off-by:
Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Guilherme G. Piccoli authored
This is a very trivial code clean-up related to commit 5468c36d ("drm/amd/display: Filter Invalid 420 Modes for HDMI TMDS"). This commit added a validation on driver probe to prevent invalid TMDS modes, but one of the fake properties (swizzle) ended-up causing a warning on driver probe; was reported here: https://gitlab.freedesktop.org/drm/amd/-/issues/2264. It was fixed by commit a1cbe691 ("drm/amd/display: patch cases with unknown plane state to prevent warning"), but the validation code had a double variable assignment, which we hereby remove. Also, the fix relies in the dcn2{0,1}patch_unknown_plane_state() callbacks, so while at it we took the opportunity to perform a small code clean-up in such routines. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Daniel Wheeler <daniel.wheeler@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Mark Broadworth <mark.broadworth@amd.com> Cc: Melissa Wen <mwen@igalia.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Sung Joon Kim <Sungjoon.Kim@amd.com> Cc: Swapnil Patel <Swapnil.Patel@amd.com> Reviewed-by:
Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by:
-
Tom Rix authored
cppcheck reports drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: style: Expression is always true because 'else if' condition is opposite to previous condition at line 1396. [multiCondition] } else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) { ^ drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1396:69: note: first condition if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type != SUBVP_PHANTOM) { ^ drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: note: else if condition is opposite to first condition } else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) { It is not necessary to explicitly the check != condition, an else is simplier. Fixes: 238debca ("drm/amd/display: Use DML for MALL SS and Subvp allocation calculations") Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Tom Rix authored
checkpatch reports drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: style: Expression is always true because 'else if' condition is opposite to previous condition at line 2895. [multiCondition] } else if (blank) { ^ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2895:6: note: first condition if (!blank) { ^ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: note: else if condition is opposite to first condition } else if (blank) { It is not necessary to explicitly the check != condition, an else is simplier. Fixes: aa5a5777 ("drm/amd/display: Vari-bright looks disabled near end of MM14") Signed-off-by: -
ye xingchen authored
opp.h is included more than once. Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by:
-
Jonathan Neuschäfer authored
Spell it as "broadcast". Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
-
- 31 Jan, 2023 25 commits
-
-
Alex Deucher authored
There could be boards with DCN listed in IP discovery, but no display hardware actually wired up. In this case the vbios display table will not be populated. Detect this case and skip loading DM when we detect it. v2: Mark DCN as harvested as well so other display checks elsewhere in the driver are handled properly. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Yiqing Yao authored
These sysfs nodes are tested supported, so enable them. Signed-off-by:
Yiqing Yao <yiqing.yao@amd.com> Reviewed-by:
-
Mario Limonciello authored
A mistake has been made on some boards with NBIO 4.3.0 where some NBIO registers aren't properly set by the hardware. Ensure that they're set during initialization. Cc: Natikar Basavaraj <Basavaraj.Natikar@amd.com> Tested-by:
Satyanarayana ReddyTVN <Satyanarayana.ReddyTVN@amd.com> Tested-by:
Rutvij Gajjar <Rutvij.Gajjar@amd.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
-
Evan Quan authored
Enable HDP clock gating control for gfx 11.0.3. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
Tim Huang authored
PMFW will handle the features disablement properly for gpu reset case, driver involvement may cause some unexpected issues. Cc: stable@vger.kernel.org # 6.1 Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
-
Aric Cyr authored
This version brings along following fixes: - fix linux dp link lost handled only one time - Reset DMUB mailbox SW state after HW reset - Unassign does_plane_fit_in_mall function from dcn3.2 - Add Function delaration in dc_link - Fix crash when connecting 2 displays with video playback - Adjust downscaling limits for dcn314 - fix FCLK pstate change underflow - Fix only one ABM pipe enabled under ODM combined case - Add missing brackets in calculation - Correct bw_params population - Fix Z8 support configurations - Add Debug Log for MST and PCON - fix MALL size hardcoded for DCN321 - add rc_params_override option in dc_dsc_config - Enable Freesync over PCon Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Hersen Wu authored
[Why] linux amdgpu defer handle link lost irq. dm add handle request to irq work queue for the first irq of link lost. if link training fails for link lost handle, link will not be enabled anymore. [How] allow adding handle request of link lost to work queue before running dp link training for link lost. Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] Otherwise we can be out of sync with what's in the hardware, leading to us rerunning every command that's presently in the ringbuffer. [How] Reset software state for the mailboxes in hw_reset callback. This is already done as part of the mailbox init in hw_init, but we do need to remember to reset the last cached wptr value as well here. Reviewed-by:
Hansen Dsouza <hansen.dsouza@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
George Shen authored
[Why] The hwss function does_plane_fit_in_mall not applicable to dcn3.2 asics. Using it with dcn3.2 can result in undefined behaviour. [How] Assign the function pointer to NULL. Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
George Shen <george.shen@amd.com> Tested-by:
-
Mustapha Ghaddar authored
[WHY] Housekeeping cleaning and adding declaration for function to be called from DM layer [HOW] Adding public functions to dc_link.h Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Mustapha Ghaddar <mghaddar@amd.com> Tested-by:
-
Aric Cyr authored
This reverts commit 7cf5ceb3. Acked-by:
-
Daniel Miess authored
[Why] Lower max_downscale_ratio and ARGB888 downscale factor to prevent cases where underflow may occur on dcn314 [How] Set max_downscale_ratio to 400 and ARGB downscale factor to 250 for dcn314 Reviewed-by:
Daniel Miess <Daniel.Miess@amd.com> Tested-by:
-
Vladimir Stempen authored
[Why] Currently we set FCLK p-state change watermark calculated based on dummy p-state latency when UCLK p-state is not supported [How] Calculate FCLK p-state change watermark based on on FCLK pstate change latency in case UCLK p-state is not supported Reviewed-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by:
Vladimir Stempen <vladimir.stempen@amd.com> Tested-by:
-
Leon Huang authored
[Why] ABM set pipe before updating ODM status, it leads to incorrect ABM pipe setting when enabling ODM combine. [How] Call ABM set pipe flow after ODM status update in program pipe sequence. Reviewed-by:
Chun-Liang Chang <Chun-Liang.Chang@amd.com> Reviewed-by:
Leon Huang <Leon.Huang1@amd.com> Tested-by:
-
Daniel Miess authored
[Why] Brackets missing in the calculation for MIN_DST_Y_NEXT_START [How] Add missing brackets for this calculation Reviewed-by:
-
Daniel Miess authored
[Why] Underflow observed during P010 video playback on dcn314 due to incorrectly populated bw_params [How] Populate fclk, memclk and voltage in bw_params with values from max pstate rather than min pstate Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] It's not supported in multi-display, but it is supported in 2nd eDP screen only. [How] Remove multi display support, restrict number of planes for all z-states support, but still allow Z8 if we're not using PWRSEQ0. Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
Fangzhi Zuo authored
Add log for MST/PCON specific use case: 1. If DP1.2 hub where gives reduced link bw and no dsc support. 2. If less than 4-lane configuration where gives reduced bw. 3. If FRL PCON enabled for asic. 4. Track MST sink count. Reviewed-by:
Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by:
-
Samson Tam authored
[Why] MALL size available can vary for different SKUs MALL size was still hardcoded for DCN321 [How] Remove hardcoding MALL size for DCN321 Reviewed-by:
Samson Tam <Samson.Tam@amd.com> Tested-by:
-
Wenjing Liu authored
[why] Current RC params are based on VESA recommended configurations. Some DSC sink may prefer non standard rc params values due to hardware limitations. To support those DSC sink we will allow DM to optionally pass rc_params_ovrd in dc_dsc_config so DC will override the default VESA recommended configurations. Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Sung Joon Kim authored
[why] Enable Freesync over PCon on Linux environment. [how] Adding Freesync over PCon support in amdgpu_dm - Read DPCD for Freesync over PCon capabilitiy - Add whitelist for compatible branch devices Reviewed-by:
Chao-kai Wang <Stylon.Wang@amd.com> Acked-by:
Sung Joon Kim <sungkim@amd.com> Tested-by:
-
Graham Sider authored
SQ_WAVE_INST_DW0 isn't present on gfx11 compared to gfx10, so update wave data type to signify a difference. Signed-off-by:
Graham Sider <Graham.Sider@amd.com> Reviewed-by:
Mukul Joshi <Mukul.Joshi@amd.com> Signed-off-by:
-
Mario Limonciello authored
We guard the suspend entry code from running unless we have proper BIOS support for either S3 mode or s0ix mode. If a user's system doesn't support either of these modes the kernel still does offer s2idle in `/sys/power/mem_sleep` so there is an expectation from users that it works even if the power consumption remains very high. Rafael Ávila de Espíndola reports that a system of his has a non-functional graphics stack after resuming. That system doesn't support S3 and the FADT doesn't indicate support for low power idle. Through some experimentation it was concluded that even without the hardware s0i3 support provided by the amd_pmc driver the power consumption over suspend is decreased by running amdgpu's s0ix suspend routine. The numbers over suspend showed: * No patch: 9.2W * Skip amdgpu suspend entirely: 10.5W * Run amdgpu s0ix routine: 7.7W As this does improve the power, remove some of the guard rails in `amdgpu_acpi.c` for only running s0ix suspend routines in the right circumstances. However if this turns out to cause regressions for anyone, we should revert this change and instead opt for skipping suspend/resume routines entirely or try to fix the underlying behavior that makes graphics fail after resume without underlying platform support. Reported-by:
Rafael Ávila de Espíndola <rafael@espindo.la> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2364Acked-by:
-
Vitaly Prosyak authored
This reverts commit fac53471. The following change: move the drm_dev_unplug call after amdgpu_driver_unload_kms in amdgpu_pci_remove. The reason is the following: amdgpu_pci_remove calls drm_dev_unregister and it should be called first to ensure userspace can't access the device instance anymore. If we call drm_dev_unplug after amdgpu_driver_unload_kms then we observe IGT PCI software unplug test failure (kernel hung) for all ASICs. This is how this regression was found. After this revert, the following commands do work not, but it would be fixed in the next commit: - sudo modprobe -r amdgpu - sudo modprobe amdgpu Signed-off-by:
-
Daniel Vetter authored
Due to holidays we started -next with more -fixes in-flight than usual, and people have been asking where they are. Backmerge to get things better in sync. Conflicts: - Tiny conflict in drm_fbdev_generic.c between variable rename and missing error handling that got added. - Conflict in drm_fb_helper.c between the added call to vgaswitcheroo in drm_fb_helper_single_fb_probe and a refactor patch that extracted lots of helpers and incidentally removed the dev local variable. Readd it to make things compile. Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 30 Jan, 2023 4 commits
-
-
https://gitlab.freedesktop.org/agd5f/linuxDave Airlie authored
amd-drm-next-6.3-2023-01-27: amdgpu: - GC11 fixes - SMU13 fixes - Freesync fixes - DP MST fixes - DP MST code rework and cleanup - AV1 fixes for VCN4 - DCN 3.2.x fixes - PSR fixes - DML optimizations - DC link code rework Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127225917.2419162-1-alexander.deucher@amd.com
-
https://gitlab.freedesktop.org/drm/tegraDave Airlie authored
drm/tegra: Changes for v6.3-rc1 This set of changes includes a rework of the custom syncpoint interrupt code to take better advantage of existing DRM/KMS infrastructure. There's also various bits of cleanup and fixes included. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-next-20230127' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into drm-next Renesas R-Car DU fixes and improvements Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
drm/i915 feature pull #2 v6.3: Features and functionality: - Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid (Jani) - Start using unversioned DMC firmware paths for new platforms (Gustavo) Refactoring and cleanups: - ELD refactor: Stop using hardware buffer, precompute ELD, and wire up ELD in the state checker (Ville) - Use generics for debugfs device parameters (Jani) - DSB refactoring and fixes (Ville) - Header refactoring, add new intel_display_limits.h (Jani) - Split out GMCH code to a new file (Jani) - Split out vblank code to a new file (Jani) - i915_drv.h and struct drm_i915_private cleanups (Jani) - Simplify FBC and DRRS debug attributes (Deepak R Varma) - Remove some single-use macros (Rodrigo) Fixes: - Fix scaler limits for display versions 12 and 13 (Luca) - Fix plane source size check for zero height (Drew Davenport) - Implement PSR2 selective fetch workaround (Jouni) - Expand a PSR workaound to more platforms and pipes (Jouni) - Expand an HDMI infoframe workaround to all MTL steppings (Jouni) - Enable PIPEDMC whenever its corresponding pipe is enabled (Imre) Merges: - Backmerge drm-next (Jani) Signed-off-by:
-
