- 23 Nov, 2018 6 commits
-
-
Xin Long authored
[ Upstream commit cc3ccf26 ] As rfc7496#section4.5 says about SCTP_PR_SUPPORTED: This socket option allows the enabling or disabling of the negotiation of PR-SCTP support for future associations. For existing associations, it allows one to query whether or not PR-SCTP support was negotiated on a particular association. It means only sctp sock's prsctp_enable can be set. Note that for the limitation of SCTP_{CURRENT|ALL}_ASSOC, we will add it when introducing SCTP_{FUTURE|CURRENT|ALL}_ASSOC for linux sctp in another patchset. v1->v2: - drop the params.assoc_id check as Neil suggested. Fixes: 28aa4c26 ("sctp: add SCTP_PR_SUPPORTED on sctp sockopt") Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 33d9a2c7 ] eth_type_trans() assumes initial value for skb->pkt_type is PACKET_HOST. This is indeed the value right after a fresh skb allocation. However, it is possible that GRO merged a packet with a different value (like PACKET_OTHERHOST in case macvlan is used), so we need to make sure napi->skb will have pkt_type set back to PACKET_HOST. Otherwise, valid packets might be dropped by the stack because their pkt_type is not PACKET_HOST. napi_reuse_skb() was added in commit 96e93eab ("gro: Add internal interfaces for VLAN"), but this bug always has been there. Fixes: 96e93eab ("gro: Add internal interfaces for VLAN") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 7ddacfa5 ] Preethi reported that PMTU discovery for UDP/raw applications is not working in the presence of VRF when the socket is not bound to a device. The problem is that ip6_sk_update_pmtu does not consider the L3 domain of the skb device if the socket is not bound. Update the function to set oif to the L3 master device if relevant. Fixes: ca254490 ("net: Add VRF support to IPv6 stack") Reported-by:
Preethi Ramachandra <preethir@juniper.net> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 16f7eb2b ] The various types of tunnels running over IPv4 can ask to set the DF bit to do PMTU discovery. However, PMTU discovery is subject to the threshold set by the net.ipv4.route.min_pmtu sysctl, and is also disabled on routes with "mtu lock". In those cases, we shouldn't set the DF bit. This patch makes setting the DF bit conditional on the route's MTU locking state. This issue seems to be older than git history. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Michał Mirosław authored
[ Upstream commit e84b4794 ] Don't request tag insertion when it isn't present in outgoing skb. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
배석진 authored
[ Upstream commit 62230715 ] Only first fragment has the sport/dport information, not the following ones. If we want consistent hash for all fragments, we need to ignore ports even for first fragment. This bug is visible for IPv6 traffic, if incoming fragments do not have a flow label, since skb_get_hash() will give different results for first fragment and following ones. It is also visible if any routing rule wants dissection and sport or dport. See commit 5e5d6fed ("ipv6: route: dissect flow in input path if fib rules need it") for details. [edumazet] rewrote the changelog completely. Fixes: 06635a35 ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Signed-off-by:
배석진 <soukjin.bae@samsung.com> Signed-off-by:
-
- 21 Nov, 2018 34 commits
-
-
Greg Kroah-Hartman authored
-
Doug Berger authored
commit 142c168e upstream. The basic memory-mapped GPIO controller lock must be released before calling the registered GPIO interrupt handlers to allow the interrupt handlers to access the hardware. Examples of why a GPIO interrupt handler might want to access the GPIO hardware include an interrupt that is configured to trigger on rising and falling edges that needs to read the current level of the input to know how to respond, or an interrupt that causes a change in a GPIO output in the same bank. If the lock is not released before enterring the handler the hardware accesses will deadlock when they attempt to grab the lock. Since the lock is only needed to protect the calculation of unmasked pending interrupts create a dedicated function to perform this and hide the complexity. Fixes: 19a7b694 ("gpio: brcmstb: Add interrupt and wakeup source support") Signed-off-by:
Doug Berger <opendmb@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Ming Lei authored
commit 11d9ea6f upstream. When nvmet_req_init() fails, __nvmet_req_complete() is called to handle the target request via .queue_response(), so nvme_loop_queue_response() shouldn't be called again for handling the failure. This patch fixes this case by the following way: - move blk_mq_start_request() before nvmet_req_init(), so nvme_loop_queue_response() may work well to complete this host request - don't call nvme_cleanup_cmd() which is done in nvme_loop_complete_rq() - don't call nvme_loop_queue_response() which is done via .queue_response() Signed-off-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> [trimmed changelog] Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Sergey Senozhatsky authored
commit fd5f7cde upstream. This patch, basically, reverts commit 6b97a20d ("printk: set may_schedule for some of console_trylock() callers"). That commit was a mistake, it introduced a big dependency on the scheduler, by enabling preemption under console_sem in printk()->console_unlock() path, which is rather too critical. The patch did not significantly reduce the possibilities of printk() lockups, but made it possible to stall printk(), as has been reported by Tetsuo Handa [1]. Another issues is that preemption under console_sem also messes up with Steven Rostedt's hand off scheme, by making it possible to sleep with console_sem both in console_unlock() and in vprintk_emit(), after acquiring the console_sem ownership (anywhere between printk_safe_exit_irqrestore() in console_trylock_spinning() and printk_safe_enter_irqsave() in console_unlock()). This makes hand off less likely and, at the same time, may result in a significant amount of pending logbuf messages. Preempted console_sem owner makes it impossible for other CPUs to emit logbuf messages, but does not make it impossible for other CPUs to append new messages to the logbuf. Reinstate the old behavior and make printk() non-preemptible. Should any printk() lockup reports arrive they must be handled in a different way. [1] http://lkml.kernel.org/r/201603022101.CAH73907.OVOOMFHFFtQJSL%20()%20I-love%20!%20SAKURA%20!%20ne%20!%20jp Fixes: 6b97a20d ("printk: set may_schedule for some of console_trylock() callers") Link: http://lkml.kernel.org/r/20180116044716.GE6607@jagdpanzerIV To: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: akpm@linux-foundation.org Cc: linux-mm@kvack.org Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Miklos Szeredi authored
commit 5e127580 upstream. Kaixuxia repors that it's possible to crash overlayfs by removing the whiteout on the upper layer before creating a directory over it. This is a reproducer: mkdir lower upper work merge touch lower/file mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merge rm merge/file ls -al merge/file rm upper/file ls -al merge/ mkdir merge/file Before commencing with a vfs_rename(..., RENAME_EXCHANGE) verify that the lookup of "upper" is positive and is a whiteout, and return ESTALE otherwise. Reported by: kaixuxia <xiakaixu1987@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: e9be9d5e ("overlay filesystem") Cc: <stable@vger.kernel.org> # v3.18 Signed-off-by:
-
Stefano Stabellini authored
commit f9005571 upstream. xen_create_contiguous_region has now only an implementation if CONFIG_XEN_PV is defined. However, on ARM we never set CONFIG_XEN_PV but we do have an implementation of xen_create_contiguous_region which is required for swiotlb-xen to work correctly (although it just sets *dma_handle). [backport: remove change to xen_remap_pfn] Cc: <stable@vger.kernel.org> # 4.12 Fixes: 16624390 ("xen: create xen_create/destroy_contiguous_region() stubs for PVHVM only builds") Signed-off-by:
Stefano Stabellini <stefanos@xilinx.com> Reviewed-by:
Juergen Gross <jgross@suse.com> CC: Jeff.Kubascik@dornerworks.com CC: Jarvis.Roach@dornerworks.com CC: Nathan.Studer@dornerworks.com CC: vkuznets@redhat.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: julien.grall@arm.com Signed-off-by:
-
Chris Wilson authored
commit 0a823e8f upstream. Ensure that the writes into the context image are completed prior to the register mmio to trigger execution. Although previously we were assured by the SDM that all writes are flushed before an uncached memory transaction (our mmio write to submit the context to HW for execution), we have empirical evidence to believe that this is not actually the case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656 References: https://bugs.freedesktop.org/show_bug.cgi?id=108315 References: https://bugs.freedesktop.org/show_bug.cgi?id=106887Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108081740.25615-1-chris@chris-wilson.co.uk Cc: stable@vger.kernel.org (cherry picked from commit 987abd5c) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
commit 0014868b upstream. Since the flags are being used to operate on a u64 variable, they too need to be marked as such so that the inverses are full width (and not zero extended on 32b kernels and bdw+). Reported-by:
Sergii Romantsov <sergii.romantsov@globallogic.com> Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk (cherry picked from commit 83b466b1) Signed-off-by:
-
Ville Syrjälä authored
commit 6a8915d0 upstream. We deinit the lpe audio device before we call drm_atomic_helper_shutdown(), which means the platform device may already be gone when it comes time to shut down the crtc. As we don't know when the last reference to the platform device gets dropped by the audio driver we can't assume that the device and its data are still around when turning off the crtc. Mark the platform device as gone as soon as we do the audio deinit. Cc: stable@vger.kernel.org Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105194604.6994-1-ville.syrjala@linux.intel.comReviewed-by:
-
Clint Taylor authored
commit 65034931 upstream. HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value mode instead of HDMI specification values. V2: Fix 88.2 Hz N value Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1540493521-1746-2-git-send-email-clinton.a.taylor@intel.com (cherry picked from commit 5a400aa3) Signed-off-by:
-
Chris Wilson authored
commit ab0d6a14 upstream. Handle integer overflow when computing the sub-page length for shmem backed pread/pwrite. Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Lyude Paul authored
commit c02ba4ef upstream. Since we need to be able to allow DPMS on->off prop changes after an MST port has disappeared from the system, we need to be able to make sure we can compute a config for the resulting atomic commit. Currently this is impossible when the port has disappeared, since the VCPI slot searching we try to do in intel_dp_mst_compute_config() will fail with -EINVAL. Since the only commits we want to allow on no-longer-present MST ports are ones that shut off display hardware, we already know that no VCPI allocations are needed. So, hardcode the VCPI slot count to 0 when intel_dp_mst_compute_config() is called on an MST port that's gone. Changes since V4: - Don't use mst_port_gone at all, just check whether or not the drm connector is registered - Daniel Vetter Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-5-lyude@redhat.com (cherry picked from commit f67207d7) Signed-off-by:
-
Lyude Paul authored
commit 80c18869 upstream. Currently we set intel_connector->mst_port to NULL to signify that the MST port has been removed from the system so that we can prevent further action on the port such as connector probes, mode probing, etc. However, we're going to need access to intel_connector->mst_port in order to fixup ->best_encoder() so that it can always return the correct encoder for an MST port to prevent legacy DPMS prop changes from failing. This should be safe, so instead keep intel_connector->mst_port always set and instead just check the status of drm_connector->regustered to signify whether or not the connector has disappeared from the system. Changes since v2: - Add a comment to mst_port_gone (Jani Nikula) - Change mst_port_gone to a u8 instead of a bool, per the kernel bot. Apparently bool is discouraged in structs these days Changes since v4: - Don't use mst_port_gone at all! Just check if the connector is registered or not - Daniel Vetter Signed-off-by:
-
Ville Syrjälä authored
commit 7cada4d0 upstream. Plane sanitation needs vblank interrupts (on account of CxSR disable). So let's restore vblank interrupts earlier. v2: Make it actually build v3: Add comment to explain why we need this (Daniel) Cc: stable@vger.kernel.org Cc: Dennis <dennis.nezic@utoronto.ca> Tested-by:
Dennis <dennis.nezic@utoronto.ca> Tested-by:
Peter Nowee <peter.nowee@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637 Fixes: b1e01595 ("drm/i915: Redo plane sanitation during readout") Signed-off-by:
-
Stanislav Lisovskiy authored
commit 23d80039 upstream. Unfortunately drm_dp_get_mst_branch_device which is called from both drm_dp_mst_handle_down_rep and drm_dp_mst_handle_up_rep seem to rely on that mgr->mst_primary is not NULL, which seem to be wrong as it can be cleared with simultaneous mode set, if probing fails or in other case. mgr->lock mutex doesn't protect against that as it might just get assigned to NULL right before, not simultaneously. There are currently bugs 107738, 108616 bugs which crash in drm_dp_get_mst_branch_device, caused by this issue. v2: Refactored the code, as it was nicely noticed. Fixed Bugzilla bug numbers(second was 108616, but not 108816) and added links. [changed title and added stable cc] Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108616 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107738 Link: https://patchwork.freedesktop.org/patch/msgid/20181109090012.24438-1-stanislav.lisovskiy@intel.comSigned-off-by:
-
Lyude Paul authored
commit dc854914 upstream. Remember, ida IDs start at 0, not 1! Signed-off-by:
Karol Herbst <kherbst@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit d9997b64 upstream. This caused a confusing error message, but there is functionally no problem since the default method is DIRECT. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Marc Zyngier authored
commit 7f3ef5de upstream. Leaving the DRM driver enabled on reboot or kexec has the annoying effect of leaving the display generating transactions whilst the IOMMU has been shut down. In turn, the IOMMU driver (which shares its interrupt line with the VOP) starts warning either on shutdown or when entering the secondary kernel in the kexec case (nothing is expected on that front). A cheap way of ensuring that things are nicely shut down is to register a shutdown callback in the platform driver. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Tested-by:
Vicente Bergas <vicencb@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180805124807.18169-1-marc.zyngier@arm.com Cc: stable@vger.kernel.org Signed-off-by:
-
Ard Biesheuvel authored
commit 72a58a63 upstream. Commit: 24d7c494 ("efi/arm-stub: Round up FDT allocation to mapping size") increased the allocation size for the FDT image created by the stub to a fixed value of 2 MB, to simplify the former code that made several attempts with increasing values for the size. This is reasonable given that the allocation is of type EFI_LOADER_DATA, which is released to the kernel unless it is explicitly memblock_reserve()d by the early boot code. However, this allocation size leaked into the 'size' field of the FDT header metadata, and so the entire allocation remains occupied by the device tree binary, even if most of it is not used to store device tree information. So call fdt_pack() to shrink the FDT data structure to its minimum size after populating all the fields, so that the remaining memory is no longer wasted. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> # v4.12+ Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 24d7c494 ("efi/arm-stub: Round up FDT allocation to mapping size") Link: http://lkml.kernel.org/r/20181114175544.12860-4-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Vasily Averin authored
commit 873d7bcf upstream. Commit a2468cc9 ("swap: choose swap device according to numa node") changed 'avail_lists' field of 'struct swap_info_struct' to an array. In popular linux distros it increased size of swap_info_struct up to 40 Kbytes and now swap_info_struct allocation requires order-4 page. Switch to kvzmalloc allows to avoid unexpected allocation failures. Link: http://lkml.kernel.org/r/fc23172d-3c75-21e2-d551-8b1808cbe593@virtuozzo.com Fixes: a2468cc9 ("swap: choose swap device according to numa node") Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Acked-by:
Aaron Lu <aaron.lu@intel.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Huang Ying <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mike Kravetz authored
commit 5e41540c upstream. This bug has been experienced several times by the Oracle DB team. The BUG is in remove_inode_hugepages() as follows: /* * If page is mapped, it was faulted in after being * unmapped in caller. Unmap (again) now after taking * the fault mutex. The mutex will prevent faults * until we finish removing the page. * * This race can only happen in the hole punch case. * Getting here in a truncate operation is a bug. */ if (unlikely(page_mapped(page))) { BUG_ON(truncate_op); In this case, the elevated map count is not the result of a race. Rather it was incorrectly incremented as the result of a bug in the huge pmd sharing code. Consider the following: - Process A maps a hugetlbfs file of sufficient size and alignment (PUD_SIZE) that a pmd page could be shared. - Process B maps the same hugetlbfs file with the same size and alignment such that a pmd page is shared. - Process B then calls mprotect() to change protections for the mapping with the shared pmd. As a result, the pmd is 'unshared'. - Process B then calls mprotect() again to chage protections for the mapping back to their original value. pmd remains unshared. - Process B then forks and process C is created. During the fork process, we do dup_mm -> dup_mmap -> copy_page_range to copy page tables. Copying page tables for hugetlb mappings is done in the routine copy_hugetlb_page_range. In copy_hugetlb_page_range(), the destination pte is obtained by: dst_pte = huge_pte_alloc(dst, addr, sz); If pmd sharing is possible, the returned pointer will be to a pte in an existing page table. In the situation above, process C could share with either process A or process B. Since process A is first in the list, the returned pte is a pointer to a pte in process A's page table. However, the check for pmd sharing in copy_hugetlb_page_range is: /* If the pagetables are shared don't copy or take references */ if (dst_pte == src_pte) continue; Since process C is sharing with process A instead of process B, the above test fails. The code in copy_hugetlb_page_range which follows assumes dst_pte points to a huge_pte_none pte. It copies the pte entry from src_pte to dst_pte and increments this map count of the associated page. This is how we end up with an elevated map count. To solve, check the dst_pte entry for huge_pte_none. If !none, this implies PMD sharing so do not copy. Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com Fixes: c5c99429 ("fix hugepages leak due to pagetable page sharing") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 1c23b410 upstream. gcc-8 complains about the prototype for this function: lib/ubsan.c:432:1: error: ignoring attribute 'noreturn' in declaration of a built-in function '__ubsan_handle_builtin_unreachable' because it conflicts with attribute 'const' [-Werror=attributes] This is actually a GCC's bug. In GCC internals __ubsan_handle_builtin_unreachable() declared with both 'noreturn' and 'const' attributes instead of only 'noreturn': https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84210 Workaround this by removing the noreturn attribute. [aryabinin: add information about GCC bug in changelog] Link: http://lkml.kernel.org/r/20181107144516.4587-1-aryabinin@virtuozzo.comSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Olof Johansson <olof@lixom.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Eric Biggers authored
commit f43f3995 upstream. All bytes of the NETLINK_CRYPTO report structures must be initialized, since they are copied to userspace. The change from strncpy() to strlcpy() broke this. As a minimal fix, change it back. Fixes: 4473710d ("crypto: user - Prepare for CRYPTO_MAX_ALG_NAME expansion") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Andreas Gruenbacher authored
commit 10283ea5 upstream. gfs2_put_super calls gfs2_clear_rgrpd to destroy the gfs2_rgrpd objects attached to the resource group glocks. That function should release the buffers attached to the gfs2_bitmap objects (bi_bh), but the call to gfs2_rgrp_brelse for doing that is missing. When gfs2_releasepage later runs across these buffers which are still referenced, it refuses to free them. This causes the pages the buffers are attached to to remain referenced as well. With enough mount/unmount cycles, the system will eventually run out of memory. Fix this by adding the missing call to gfs2_rgrp_brelse in gfs2_clear_rgrpd. (Also fix a gfs2_rgrp_relse -> gfs2_rgrp_brelse typo in a comment.) Fixes: 39b0f1e9 ("GFS2: Don't brelse rgrp buffer_heads every allocation") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
Guenter Roeck authored
commit 1823342a upstream. gcc 8.1.0 complains: fs/configfs/symlink.c:67:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length fs/configfs/symlink.c: In function 'configfs_get_link': fs/configfs/symlink.c:63:13: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu@cybertrust.co.jp> Signed-off-by:
-
Miklos Szeredi authored
commit 7fabaf30 upstream. fuse_request_send_notify_reply() may fail if the connection was reset for some reason (e.g. fs was unmounted). Don't leak request reference in this case. Besides leaking memory, this resulted in fc->num_waiting not being decremented and hence fuse_wait_aborted() left in a hanging and unkillable state. Fixes: 2d45ba38 ("fuse: add retrieve request") Fixes: b8f95e5d ("fuse: umount should wait for all requests") Reported-and-tested-by: syzbot+6339eda9cb4ebbc4c37b@syzkaller.appspotmail.com Signed-off-by:
-
Lukas Czerner authored
commit ebacb812 upstream. In async IO blocking case the additional reference to the io is taken for it to survive fuse_aio_complete(). In non blocking case this additional reference is not needed, however we still reference io to figure out whether to wait for completion or not. This is wrong and will lead to use-after-free. Fix it by storing blocking information in separate variable. This was spotted by KASAN when running generic/208 fstest. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Reported-by:
Zorro Lang <zlang@redhat.com> Signed-off-by:
-
Maciej W. Rozycki authored
commit 7ce9a992 upstream. Fix an issue with the 32-bit range error path in `rtc_hctosys' where no error code is set and consequently the successful preceding call result from `rtc_read_time' is propagated to `rtc_hctosys_ret'. This in turn makes any subsequent call to `hctosys_show' incorrectly report in sysfs that the system time has been set from this RTC while it has not. Set the error to ERANGE then if we can't express the result due to an overflow. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Fixes: b3a5ac42 ("rtc: hctosys: Ensure system time doesn't overflow time_t") Cc: stable@vger.kernel.org # 4.17+ Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Scott Mayhew authored
commit 01310bb7 upstream. Make sure we have a saved filehandle, otherwise we'll oops with a null pointer dereference in nfs4_preprocess_stateid_op(). Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Frank Sorenson authored
commit 5d7a5bcb upstream. When truncating the encode buffer, the page_ptr is getting advanced, causing the next page to be skipped while encoding. The page is still included in the response, so the response contains a page of bogus data. We need to adjust the page_ptr backwards to ensure we encode the next page into the correct place. We saw this triggered when concurrent directory modifications caused nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting call to xdr_truncate_encode() corrupted the READDIR reply. Signed-off-by:
Frank Sorenson <sorenson@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Christophe Leroy authored
commit 568fb6f4 upstream. Since commit ad67b74d ("printk: hash addresses printed with %p"), all pointers printed with %p are printed with hashed addresses instead of real addresses in order to avoid leaking addresses in dmesg and syslog. But this applies to kdb too, with is unfortunate: Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry kdb> ps 15 sleeping system daemon (state M) processes suppressed, use 'ps A' to see all. Task Addr Pid Parent [*] cpu State Thread Command 0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh 0x(ptrval) 1 0 0 0 S 0x(ptrval) init 0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp 0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp 0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0 0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H 0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0 0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq 0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt The whole purpose of kdb is to debug, and for debugging real addresses need to be known. In addition, data displayed by kdb doesn't go into dmesg. This patch replaces all %p by %px in kdb in order to display real addresses. Fixes: ad67b74d ("printk: hash addresses printed with %p") Cc: <stable@vger.kernel.org> Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Christophe Leroy authored
commit dded2e15 upstream. On a powerpc 8xx, 'btc' fails as follows: Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0x0 when booting the kernel with 'debug_boot_weak_hash', it fails as well Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0xba99ad80 On other platforms, Oopses have been observed too, see https://github.com/linuxppc/linux/issues/139 This is due to btc calling 'btt' with %p pointer as an argument. This patch replaces %p by %px to get the real pointer value as expected by 'btt' Fixes: ad67b74d ("printk: hash addresses printed with %p") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Eric W. Biederman authored
commit 9c8e0a1b upstream. Timothy Baldwin <timbaldwin@fastmail.co.uk> wrote: > As per mount_namespaces(7) unprivileged users should not be able to look under mount points: > > Mounts that come as a single unit from more privileged mount are locked > together and may not be separated in a less privileged mount namespace. > > However they can: > > 1. Create a mount namespace. > 2. In the mount namespace open a file descriptor to the parent of a mount point. > 3. Destroy the mount namespace. > 4. Use the file descriptor to look under the mount point. > > I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8. > > The setup: > > $ sudo sysctl kernel.unprivileged_userns_clone=1 > kernel.unprivileged_userns_clone = 1 > $ mkdir -p A/B/Secret > $ sudo mount -t tmpfs hide A/B > > > "Secret" is indeed hidden as expected: > > $ ls -lR A > A: > total 0 > drwxrwxrwt 2 root root 40 Feb 12 21:08 B > > A/B: > total 0 > > > The attack revealing "Secret": > > $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A" > /proc/self/fd/4/: > total 0 > drwxr-xr-x 3 root root 60 Feb 12 21:08 B > > /proc/self/fd/4/B: > total 0 > drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret > > /proc/self/fd/4/B/Secret: > total 0 I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and disconnecting all of the mounts in a mount namespace. Fix this by factoring drop_mounts out of drop_collected_mounts and passing 0 instead of UMOUNT_SYNC. There are two possible behavior differences that result from this. - No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on the vfsmounts being unmounted. This effects the lazy rcu walk by kicking the walk out of rcu mode and forcing it to be a non-lazy walk. - No longer disconnecting locked mounts will keep some mounts around longer as they stay because the are locked to other mounts. There are only two users of drop_collected mounts: audit_tree.c and put_mnt_ns. In audit_tree.c the mounts are private and there are no rcu lazy walks only calls to iterate_mounts. So the changes should have no effect except for a small timing effect as the connected mounts are disconnected. In put_mnt_ns there may be references from process outside the mount namespace to the mounts. So the mounts remaining connected will be the bug fix that is needed. That rcu walks are allowed to continue appears not to be a problem especially as the rcu walk change was about an implementation detail not about semantics. Cc: stable@vger.kernel.org Fixes: 5ff9d8a6 ("vfs: Lock in place mounts from more privileged users") Reported-by:
Timothy Baldwin <timbaldwin@fastmail.co.uk> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit df7342b2 upstream. Jonathan Calmels from NVIDIA reported that he's able to bypass the mount visibility security check in place in the Linux kernel by using a combination of the unbindable property along with the private mount propagation option to allow a unprivileged user to see a path which was purposefully hidden by the root user. Reproducer: # Hide a path to all users using a tmpfs root@castiana:~# mount -t tmpfs tmpfs /sys/devices/ root@castiana:~# # As an unprivileged user, unshare user namespace and mount namespace stgraber@castiana:~$ unshare -U -m -r # Confirm the path is still not accessible root@castiana:~# ls /sys/devices/ # Make /sys recursively unbindable and private root@castiana:~# mount --make-runbindable /sys root@castiana:~# mount --make-private /sys # Recursively bind-mount the rest of /sys over to /mnnt root@castiana:~# mount --rbind /sys/ /mnt # Access our hidden /sys/device as an unprivileged user root@castiana:~# ls /mnt/devices/ breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual Solve this by teaching copy_tree to fail if a mount turns out to be both unbindable and locked. Cc: stable@vger.kernel.org Fixes: 5ff9d8a6 ("vfs: Lock in place mounts from more privileged users") Reported-by:
Jonathan Calmels <jcalmels@nvidia.com> Signed-off-by:
-
