- 22 Oct, 2016 25 commits
-
-
Glauber Costa authored
commit 3932a86b upstream. While debugging timeouts happening in my application workload (ScyllaDB), I have observed calls to open() taking a long time, ranging everywhere from 2 seconds - the first ones that are enough to time out my application - to more than 30 seconds. The problem seems to happen because XFS may block on pending metadata updates under certain circumnstances, and that's confirmed with the following backtrace taken by the offcputime tool (iovisor/bcc): ffffffffb90c57b1 finish_task_switch ffffffffb97dffb5 schedule ffffffffb97e310c schedule_timeout ffffffffb97e1f12 __down ffffffffb90ea821 down ffffffffc046a9dc xfs_buf_lock ffffffffc046abfb _xfs_buf_find ffffffffc046ae4a xfs_buf_get_map ffffffffc046babd xfs_buf_read_map ffffffffc0499931 xfs_trans_read_buf_map ffffffffc044a561 xfs_da_read_buf ffffffffc0451390 xfs_dir3_leaf_read.constprop.16 ffffffffc0452b90 xfs_dir2_leaf_lookup_int ffffffffc0452e0f xfs_dir2_leaf_lookup ffffffffc044d9d3 xfs_dir_lookup ffffffffc047d1d9 xfs_lookup ffffffffc0479e53 xfs_vn_lookup ffffffffb925347a path_openat ffffffffb9254a71 do_filp_open ffffffffb9242a94 do_sys_open ffffffffb9242b9e sys_open ffffffffb97e42b2 entry_SYSCALL_64_fastpath 00007fb0698162ed [unknown] Inspecting my run with blktrace, I can see that the xfsaild kthread exhibit very high "Dispatch wait" times, on the dozens of seconds range and consistent with the open() times I have saw in that run. Still from the blktrace output, we can after searching a bit, identify the request that wasn't dispatched: 8,0 11 152 81.092472813 804 A WM 141698288 + 8 <- (8,1) 141696240 8,0 11 153 81.092472889 804 Q WM 141698288 + 8 [xfsaild/sda1] 8,0 11 154 81.092473207 804 G WM 141698288 + 8 [xfsaild/sda1] 8,0 11 206 81.092496118 804 I WM 141698288 + 8 ( 22911) [xfsaild/sda1] <==== 'I' means Inserted (into the IO scheduler) ===================================> 8,0 0 289372 96.718761435 0 D WM 141698288 + 8 (15626265317) [swapper/0] <==== Only 15s later the CFQ scheduler dispatches the request ======================> As we can see above, in this particular example CFQ took 15 seconds to dispatch this request. Going back to the full trace, we can see that the xfsaild queue had plenty of opportunity to run, and it was selected as the active queue many times. It would just always be preempted by something else (example): 8,0 1 0 81.117912979 0 m N cfq1618SN / insert_request 8,0 1 0 81.117913419 0 m N cfq1618SN / add_to_rr 8,0 1 0 81.117914044 0 m N cfq1618SN / preempt 8,0 1 0 81.117914398 0 m N cfq767A / slice expired t=1 8,0 1 0 81.117914755 0 m N cfq767A / resid=40 8,0 1 0 81.117915340 0 m N / served: vt=1948520448 min_vt=1948520448 8,0 1 0 81.117915858 0 m N cfq767A / sl_used=1 disp=0 charge=0 iops=1 sect=0 where cfq767 is the xfsaild queue and cfq1618 corresponds to one of the ScyllaDB IO dispatchers. The requests preempting the xfsaild queue are synchronous requests. That's a characteristic of ScyllaDB workloads, as we only ever issue O_DIRECT requests. While it can be argued that preempting ASYNC requests in favor of SYNC is part of the CFQ logic, I don't believe that doing so for 15+ seconds is anyone's goal. Moreover, unless I am misunderstanding something, that breaks the expectation set by the "fifo_expire_async" tunable, which in my system is set to the default. Looking at the code, it seems to me that the issue is that after we make an async queue active, there is no guarantee that it will execute any request. When the queue itself tests if it cfq_may_dispatch() it can bail if it sees SYNC requests in flight. An incoming request from another queue can also preempt it in such situation before we have the chance to execute anything (as seen in the trace above). This patch sets the must_dispatch flag if we notice that we have requests that are already fifo_expired. This flag is always cleared after cfq_dispatch_request() returns from cfq_dispatch_requests(), so it won't pin the queue for subsequent requests (unless they are themselves expired) Care is taken during preempt to still allow rt requests to preempt us regardless. Testing my workload with this patch applied produces much better results. From the application side I see no timeouts, and the open() latency histogram generated by systemtap looks much better, with the worst outlier at 131ms: Latency histogram of xfs_buf_lock acquisition (microseconds): value |-------------------------------------------------- count 0 | 11 1 |@@@@ 161 2 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 1966 4 |@ 54 8 | 36 16 | 7 32 | 0 64 | 0 ~ 1024 | 0 2048 | 0 4096 | 1 8192 | 1 16384 | 2 32768 | 0 65536 | 0 131072 | 1 262144 | 0 524288 | 0 Signed-off-by:
Glauber Costa <glauber@scylladb.com> CC: Jens Axboe <axboe@kernel.dk> CC: linux-block@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miklos Szeredi authored
commit f2b20f6e upstream. This fixes a bug where the permission was not properly checked in overlayfs. The testcase is ltp/utimensat01. It is also cleaner and safer to do the permission checking in the vfs helper instead of the caller. This patch introduces an additional ia_valid flag ATTR_TOUCH (since touch(1) is the most obvious user of utimes(NULL)) that is passed into notify_change whenever the conditions for this special permission checking mode are met. Reported-by:
Aihua Zhang <zhangaihua1@huawei.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Tested-by:
-
Marcelo Ricardo Leitner authored
commit 3a8db798 upstream. After backporting commit ee44b4bc ("dlm: use sctp 1-to-1 API") series to a kernel with an older workqueue which didn't use RCU yet, it was noticed that we are freeing the workqueues in dlm_lowcomms_stop() too early as free_conn() will try to access that memory for canceling the queued works if any. This issue was introduced by commit 0d737a8c as before it such attempt to cancel the queued works wasn't performed, so the issue was not present. This patch fixes it by simply inverting the free order. Fixes: 0d737a8c ("dlm: fix race while closing connections") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
Marcelo Cerri authored
commit 80da44c2 upstream. This patch changes the p8_ghash driver to use ghash-generic as a fixed fallback implementation. This allows the correct value of descsize to be defined directly in its shash_alg structure and avoids problems with incorrect buffer sizes when its state is exported or imported. Reported-by:
Jan Stancek <jstancek@redhat.com> Fixes: cc333cd6 ("crypto: vmx - Adding GHASH routines for VMX module") Signed-off-by:
Marcelo Cerri <marcelo.cerri@canonical.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Marcelo Cerri authored
commit a397ba82 upstream. Move common values and types used by ghash-generic to a new header file so drivers can directly use ghash-generic as a fallback implementation. Fixes: cc333cd6 ("crypto: vmx - Adding GHASH routines for VMX module") Signed-off-by:
-
gmail authored
commit e81d4477 upstream. The commit 6050d47a: "ext4: bail out from make_indexed_dir() on first error" could end up leaking bh2 in the error path. [ Also avoid renaming bh2 to bh, which just confuses things --tytso ] Signed-off-by:
yangsheng <yngsion@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Ross Zwisler authored
commit cca32b7e upstream. Currently when doing a DAX hole punch with ext4 we fail to do a writeback. This is because the logic around filemap_write_and_wait_range() in ext4_punch_hole() only looks for dirty page cache pages in the radix tree, not for dirty DAX exceptional entries. Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Fabian Frederick authored
commit edf15aa1 upstream. Running xfstests generic/013 with kmemleak gives the following: unreferenced object 0xffff8801d3d27de0 (size 96): comm "fsstress", pid 4941, jiffies 4294860168 (age 53.485s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff818eaaf3>] kmemleak_alloc+0x23/0x40 [<ffffffff81179805>] __kmalloc+0xf5/0x1d0 [<ffffffff8122ef5c>] ext4_find_extent+0x1ec/0x2f0 [<ffffffff8123530c>] ext4_insert_range+0x34c/0x4a0 [<ffffffff81235942>] ext4_fallocate+0x4e2/0x8b0 [<ffffffff81181334>] vfs_fallocate+0x134/0x210 [<ffffffff8118203f>] SyS_fallocate+0x3f/0x60 [<ffffffff818efa9b>] entry_SYSCALL_64_fastpath+0x13/0x8f [<ffffffffffffffff>] 0xffffffffffffffff Problem seems mitigated by dropping refs and freeing path when there's no path[depth].p_ext Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Daeho Jeong authored
commit 93e3b4e6 upstream. Now, ext4_do_update_inode() clears high 16-bit fields of uid/gid of deleted and evicted inode to fix up interoperability with old kernels. However, it checks only i_dtime of an inode to determine whether the inode was deleted and evicted, and this is very risky, because i_dtime can be used for the pointer maintaining orphan inode list, too. We need to further check whether the i_dtime is being used for the orphan inode list even if the i_dtime is not NULL. We found that high 16-bit fields of uid/gid of inode are unintentionally and permanently cleared when the inode truncation is just triggered, but not finished, and the inode metadata, whose high uid/gid bits are cleared, is written on disk, and the sudden power-off follows that in order. Signed-off-by:
Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by:
Hobin Woo <hobin.woo@samsung.com> Signed-off-by:
-
Eric Whitney authored
commit 14fbd4aa upstream. Online defragging of encrypted files is not currently implemented. However, the move extent ioctl can still return successfully when called. For example, this occurs when xfstest ext4/020 is run on an encrypted file system, resulting in a corrupted test file and a corresponding test failure. Until the proper functionality is implemented, fail the move extent ioctl if either the original or donor file is encrypted. Signed-off-by:
Eric Whitney <enwlinux@gmail.com> Signed-off-by:
-
Brian King authored
commit 07d0e9a8 upstream. If a VFC port gets unmapped in the VIOS, it may not respond with a CRQ init complete following H_REG_CRQ. If this occurs, we can end up having called scsi_block_requests and not a resulting unblock until the init complete happens, which may never occur, and we end up hanging I/O requests. This patch ensures the host action stay set to IBMVFC_HOST_ACTION_TGT_DEL so we move all rports into devloss state and unblock unless we receive an init complete. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Acked-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Borislav Petkov authored
commit 4bd173c3 upstream. Do the user_len check first and then the ver_addr allocation so that we can save us the kfree() on the error path when user_len is > ARCMSR_API_DATA_BUFLEN. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Marco Grassi <marco.gra@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Tomas Henzl <thenzl@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit 7bc2b55a upstream. We need to put an upper bound on "user_len" so the memcpy() doesn't overflow. Reported-by:
Marco Grassi <marco.gra@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Justin Maggard authored
commit c8475090 upstream. Add missing dmaengine_unmap_put(), so we don't OOM during RAID6 sync. Fixes: 1786b943 ("async_pq_val: convert to dmaengine_unmap_data") Signed-off-by:
Justin Maggard <jmaggard@netgear.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Al Viro authored
commit 79a628d1 upstream. reiserfs_xattr_[sg]et() will fail with -EOPNOTSUPP for V1 inodes anyway, and all reiserfs instances of ->[sg]et() call it and so does ->set_acl(). Checks for name length in the instances had been bogus; they should've been "bugger off if it's _exactly_ the prefix" (as generic would do on its own) and not "bugger off if it's shorter than the prefix" - that can't happen. xattr_full_name() is needed to adjust for the fact that generic instances will skip the prefix in the name passed to ->[gs]et(); reiserfs homegrown analogues didn't. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> [jeffm: Backported to v4.4: adjust context] Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Mike Galbraith authored
commit 420902c9 upstream. If we hold the superblock lock while calling reiserfs_quota_on_mount(), we can deadlock our own worker - mount blocks kworker/3:2, sleeps forever more. crash> ps|grep UN 715 2 3 ffff880220734d30 UN 0.0 0 0 [kworker/3:2] 9369 9341 2 ffff88021ffb7560 UN 1.3 493404 123184 Xorg 9665 9664 3 ffff880225b92ab0 UN 0.0 47368 812 udisks-daemon 10635 10403 3 ffff880222f22c70 UN 0.0 14904 936 mount crash> bt ffff880220734d30 PID: 715 TASK: ffff880220734d30 CPU: 3 COMMAND: "kworker/3:2" #0 [ffff8802244c3c20] schedule at ffffffff8144584b #1 [ffff8802244c3cc8] __rt_mutex_slowlock at ffffffff814472b3 #2 [ffff8802244c3d28] rt_mutex_slowlock at ffffffff814473f5 #3 [ffff8802244c3dc8] reiserfs_write_lock at ffffffffa05f28fd [reiserfs] #4 [ffff8802244c3de8] flush_async_commits at ffffffffa05ec91d [reiserfs] #5 [ffff8802244c3e08] process_one_work at ffffffff81073726 #6 [ffff8802244c3e68] worker_thread at ffffffff81073eba #7 [ffff8802244c3ec8] kthread at ffffffff810782e0 #8 [ffff8802244c3f48] kernel_thread_helper at ffffffff81450064 crash> rd ffff8802244c3cc8 10 ffff8802244c3cc8: ffffffff814472b3 ffff880222f23250 .rD.....P2.".... ffff8802244c3cd8: 0000000000000000 0000000000000286 ................ ffff8802244c3ce8: ffff8802244c3d30 ffff880220734d80 0=L$.....Ms .... ffff8802244c3cf8: ffff880222e8f628 0000000000000000 (.."............ ffff8802244c3d08: 0000000000000000 0000000000000002 ................ crash> struct rt_mutex ffff880222e8f628 struct rt_mutex { wait_lock = { raw_lock = { slock = 65537 } }, wait_list = { node_list = { next = 0xffff8802244c3d48, prev = 0xffff8802244c3d48 } }, owner = 0xffff880222f22c71, save_state = 0 } crash> bt 0xffff880222f22c70 PID: 10635 TASK: ffff880222f22c70 CPU: 3 COMMAND: "mount" #0 [ffff8802216a9868] schedule at ffffffff8144584b #1 [ffff8802216a9910] schedule_timeout at ffffffff81446865 #2 [ffff8802216a99a0] wait_for_common at ffffffff81445f74 #3 [ffff8802216a9a30] flush_work at ffffffff810712d3 #4 [ffff8802216a9ab0] schedule_on_each_cpu at ffffffff81074463 #5 [ffff8802216a9ae0] invalidate_bdev at ffffffff81178aba #6 [ffff8802216a9af0] vfs_load_quota_inode at ffffffff811a3632 #7 [ffff8802216a9b50] dquot_quota_on_mount at ffffffff811a375c #8 [ffff8802216a9b80] finish_unfinished at ffffffffa05dd8b0 [reiserfs] #9 [ffff8802216a9cc0] reiserfs_fill_super at ffffffffa05de825 [reiserfs] RIP: 00007f7b9303997a RSP: 00007ffff443c7a8 RFLAGS: 00010202 RAX: 00000000000000a5 RBX: ffffffff8144ef12 RCX: 00007f7b932e9ee0 RDX: 00007f7b93d9a400 RSI: 00007f7b93d9a3e0 RDI: 00007f7b93d9a3c0 RBP: 00007f7b93d9a2c0 R8: 00007f7b93d9a550 R9: 0000000000000001 R10: ffffffffc0ed040e R11: 0000000000000202 R12: 000000000000040e R13: 0000000000000000 R14: 00000000c0ed040e R15: 00007ffff443ca20 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b Signed-off-by:
Mike Galbraith <efault@gmx.de> Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Acked-by:
Mike Galbraith <mgalbraith@suse.de> Signed-off-by:
-
Nicolas Iooss authored
commit 61ab0d40 upstream. In sst_prepare_and_post_msg(), when a response is received in "block", the following code gets executed: *data = kzalloc(block->size, GFP_KERNEL); memcpy(data, (void *) block->data, block->size); The memcpy() call overwrites the content of the *data pointer instead of filling the newly-allocated memory (which pointer is hold by *data). Fix this by merging kzalloc+memcpy into a single kmemdup() call. Thanks Joe Perches for suggesting using kmemdup() Fixes: 60dc8dba ("ASoC: Intel: sst: Add some helper functions") Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Rafał Miłecki authored
commit 23e9c128 upstream. This function is called from get_station callback which means that every time user space was getting/dumping station(s) we were leaking 2 KiB. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Fixes: 1f0dc59a ("brcmfmac: rework .get_station() callback") Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Guilherme G Piccoli authored
commit edfc23ee upstream. Although rare, it's possible to hit PCI error early on device probe, meaning possibly some structs are not entirely initialized, and some might even be completely uninitialized, leading to NULL pointer dereference. The i40e driver currently presents a "bad" behavior if device hits such early PCI error: firstly, the struct i40e_pf might not be attached to pci_dev yet, leading to a NULL pointer dereference on access to pf->state. Even checking if the struct is NULL and avoiding the access in that case isn't enough, since the driver cannot recover from PCI error that early; in our experiments we saw multiple failures on kernel log, like: [549.664] i40e 0007:01:00.1: Initial pf_reset failed: -15 [549.664] i40e: probe of 0007:01:00.1 failed with error -15 [...] [871.644] i40e 0007:01:00.1: The driver for the device stopped because the device firmware failed to init. Try updating your NVM image. [871.644] i40e: probe of 0007:01:00.1 failed with error -32 [...] [872.516] i40e 0007:01:00.0: ARQ: Unknown event 0x0000 ignored Between the first probe failure (error -15) and the second (error -32) another PCI error happened due to the first bad probe. Also, driver started to flood console with those ARQ event messages. This patch will prevent these issues by allowing error recovery mechanism to remove the failed device from the system instead of trying to recover from early PCI errors during device probe. Signed-off-by:
Guilherme G Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Miklos Szeredi authored
commit a09f99ed upstream. Fuse allowed VFS to set mode in setattr in order to clear suid/sgid on chown and truncate, and (since writeback_cache) write. The problem with this is that it'll potentially restore a stale mode. The poper fix would be to let the filesystems do the suid/sgid clearing on the relevant operations. Possibly some are already doing it but there's no way we can detect this. So fix this by refreshing and recalculating the mode. Do this only if ATTR_KILL_S[UG]ID is set to not destroy performance for writes. This is still racy but the size of the window is reduced. Signed-off-by:
-
Miklos Szeredi authored
commit 5e2b8828 upstream. Without "default_permissions" the userspace filesystem's lookup operation needs to perform the check for search permission on the directory. If directory does not allow search for everyone (this is quite rare) then userspace filesystem has to set entry timeout to zero to make sure permissions are always performed. Changing the mode bits of the directory should also invalidate the (previously cached) dentry to make sure the next lookup will have a chance of updating the timeout, if needed. Reported-by:
Jean-Pierre André <jean-pierre.andre@wanadoo.fr> Signed-off-by:
-
Miklos Szeredi authored
commit cb3ae6d2 upstream. Make sure userspace filesystem is returning a well formed list of xattr names (zero or more nonzero length, null terminated strings). [Michael Theall: only verify in the nonzero size case] Signed-off-by:
-
Peng Fan authored
commit 85714108 upstream. When dma_common_free_remap, the input parameter 'size' may not be page aligned. And, met kernel warning when doing iommu dma for usb on i.MX8 platform: " WARNING: CPU: 0 PID: 869 at mm/vmalloc.c:70 vunmap_page_range+0x1cc/0x1d0() Modules linked in: CPU: 0 PID: 869 Comm: kworker/u8:2 Not tainted 4.1.12-00444-gc5f9d1d-dirty #147 Hardware name: Freescale i.MX8DV Sabreauto (DT) Workqueue: ci_otg ci_otg_work Call trace: [<ffffffc000089920>] dump_backtrace+0x0/0x124 [<ffffffc000089a54>] show_stack+0x10/0x1c [<ffffffc0006d1e6c>] dump_stack+0x84/0xc8 [<ffffffc0000b4568>] warn_slowpath_common+0x98/0xd0 [<ffffffc0000b4664>] warn_slowpath_null+0x14/0x20 [<ffffffc000170348>] vunmap_page_range+0x1c8/0x1d0 [<ffffffc000170388>] unmap_kernel_range+0x20/0x88 [<ffffffc000460ad0>] dma_common_free_remap+0x74/0x84 [<ffffffc0000940d8>] __iommu_free_attrs+0x9c/0x178 [<ffffffc0005032bc>] ehci_mem_cleanup+0x140/0x194 [<ffffffc000503548>] ehci_stop+0x8c/0xdc [<ffffffc0004e8258>] usb_remove_hcd+0xf0/0x1cc [<ffffffc000516bc0>] host_stop+0x1c/0x58 [<ffffffc000514240>] ci_otg_work+0xdc/0x120 [<ffffffc0000c9c34>] process_one_work+0x134/0x33c [<ffffffc0000c9f78>] worker_thread+0x13c/0x47c [<ffffffc0000cf43c>] kthread+0xd8/0xf0 " For dma_common_pages_remap: dma_common_pages_remap |->get_vm_area_caller |->__get_vm_area_node |->size = PAGE_ALIGN(size); Round up to page aligned So, in dma_common_free_remap, we also need a page aligned size, pass 'PAGE_ALIGN(size)' to unmap_kernel_range. Signed-off-by:
Peng Fan <van.freenix@gmail.com> Signed-off-by:
-
Junjie Mao authored
commit 14155caf upstream. Fixes: 4246a0b6 ("block: add a bi_error field to struct bio") Signed-off-by:
Junjie Mao <junjie.mao@enight.me> Acked-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Kefeng Wang authored
commit e16b46f1 upstream. It should check the data->pclk, not data->clk when get apb_pclk. Fixes: c8ed99d4("serial: 8250_dw: Add support for deferred probing") Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
- 20 Oct, 2016 3 commits
-
-
Greg Kroah-Hartman authored
-
Linus Torvalds authored
commit 19be0eaf upstream. This is an ancient bug that was actually attempted to be fixed once (badly) by me eleven years ago in commit 4ceb5db9 ("Fix get_user_pages() race for write access") but that was then undone due to problems on s390 by commit f33ea7f4 ("fix get_user_pages bug"). In the meantime, the s390 situation has long been fixed, and we can now fix it by checking the pte_dirty() bit properly (and do it better). The s390 dirty bit was implemented in abf09bed ("s390/mm: implement software dirty bits") which made it into v3.9. Earlier kernels will have to look at the page state itself. Also, the VM has become more scalable, and what used a purely theoretical race back then has become easier to trigger. To fix it, we introduce a new internal FOLL_COW flag to mark the "yes, we already did a COW" rather than play racy games with FOLL_WRITE that is very fundamental, and then use the pte dirty flag to validate that the FOLL_COW flag is still valid. Reported-and-tested-by:
Phil "not Paul" Oester <kernel@linuxace.com> Acked-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Michal Hocko <mhocko@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Nick Piggin <npiggin@gmail.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by:
-
H.J. Lu authored
commit 6d92bc9d upstream. The 32-bit x86 assembler in binutils 2.26 will generate R_386_GOT32X relocation to get the symbol address in PIC. When the compressed x86 kernel isn't built as PIC, the linker optimizes R_386_GOT32X relocations to their fixed symbol addresses. However, when the compressed x86 kernel is loaded at a different address, it leads to the following load failure: Failed to allocate space for phdrs during the decompression stage. If the compressed x86 kernel is relocatable at run-time, it should be compiled with -fPIE, instead of -fPIC, if possible and should be built as Position Independent Executable (PIE) so that linker won't optimize R_386_GOT32X relocation to its fixed symbol address. Older linkers generate R_386_32 relocations against locally defined symbols, _bss, _ebss, _got and _egot, in PIE. It isn't wrong, just less optimal than R_386_RELATIVE. But the x86 kernel fails to properly handle R_386_32 relocations when relocating the kernel. To generate R_386_RELATIVE relocations, we mark _bss, _ebss, _got and _egot as hidden in both 32-bit and 64-bit x86 kernels. To build a 64-bit compressed x86 kernel as PIE, we need to disable the relocation overflow check to avoid relocation overflow errors. We do this with a new linker command-line option, -z noreloc-overflow, which got added recently: commit 4c10bbaa0912742322f10d9d5bb630ba4e15dfa7 Author: H.J. Lu <hjl.tools@gmail.com> Date: Tue Mar 15 11:07:06 2016 -0700 Add -z noreloc-overflow option to x86-64 ld Add -z noreloc-overflow command-line option to the x86-64 ELF linker to disable relocation overflow check. This can be used to avoid relocation overflow check if there will be no dynamic relocation overflow at run-time. The 64-bit compressed x86 kernel is built as PIE only if the linker supports -z noreloc-overflow. So far 64-bit relocatable compressed x86 kernel boots fine even when it is built as a normal executable. Signed-off-by:
H.J. Lu <hjl.tools@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org [ Edited the changelog and comments. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
- 16 Oct, 2016 12 commits
-
-
Greg Kroah-Hartman authored
-
Jarkko Sakkinen authored
commit 72fd50e1 upstream. The req_canceled() callback is used by tpm_transmit() periodically to check whether the request has been canceled while it is receiving a response from the TPM. The TPM_CRB_CTRL_CANCEL register was cleared already in the crb_cancel callback, which has two consequences: * Cancel might not happen. * req_canceled() always returns zero. A better place to clear the register is when starting to send a new command. The behavior of TPM_CRB_CTRL_CANCEL is described in the section 5.5.3.6 of the PTP specification. Fixes: 30fc8d13 ("tpm: TPM 2.0 CRB Interface") Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Jarkko Sakkinen authored
commit d4816edf upstream. Unseal and load operations should be done as an atomic operation. This commit introduces unlocked tpm_transmit() so that tpm2_unseal_trusted() can do the locking by itself. Fixes: 0fe54803 ("keys, trusted: seal/unseal with TPM 2.0 chips") Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Miklos Szeredi authored
commit e71b9dff upstream. Ima tries to call ->setxattr() on overlayfs dentry after having locked underlying inode, which results in a deadlock. Reported-by:
Krisztian Litkey <kli@iki.fi> Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Signed-off-by:
-
Christophe Jaillet authored
commit af48d7bc upstream. We know that 'ret = 0' because it has been tested a few lines above. So, if 'kzalloc' fails, 0 will be returned instead of an error code. Return -ENOMEM instead. Fixes: a0d46a3d ("ARM: cpuidle: Register per cpuidle device") Signed-off-by:
Christophe Jaillet <christophe.jaillet@wanadoo.fr> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Linus Walleij authored
commit ca88696e upstream. The Qualcomm PMIC GPIO and MPP lines are problematic: the are fetched from the main MFD driver with platform_get_irq() which means that at this point they will all be assigned the flags set up for the interrupts in the device tree. That is problematic since these are flagged as rising edge and an this point the interrupt descriptor is assigned a rising edge, while the only thing the GPIO/MPP drivers really do is issue irq_get_irqchip_state() on the line to read it out and to provide a .to_irq() helper for *other* IRQ consumers. If another device tree node tries to flag the same IRQ for use as something else than rising edge, the kernel irqdomain core will protest like this: type mismatch, failed to map hwirq-NN for <FOO>! Which is what happens when the device tree defines two contradictory flags for the same interrupt line. To work around this and alleviate the problem, assign 0 as flag for the interrupts taken by the PM GPIO and MPP drivers. This will lead to the flag being unset, and a second consumer requesting rising, falling, both or level interrupts will be respected. This is what the qcom-pm*.dtsi files already do. Switched to using the symbolic name IRQ_TYPE_NONE so that we get this more readable. Fixes: bce36046 ("ARM: dts: apq8064: add pm8921 mpp support") Fixes: 874443fe ("ARM: dts: apq8064: Add pm8921 mfd and its gpio node") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Björn Andersson <bjorn.andersson@linaro.org> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Andy Gross <andy.gross@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Grzegorz Jaszczyk authored
commit 061492cf upstream. The armada-390.dtsi was broken since the first patch which adds Device Tree files for Armada 39x SoC was introduced. Signed-off-by:
Grzegorz Jaszczyk <jaz@semihalf.com> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes 538da83d ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board") Signed-off-by:
-
Josh Poimboeuf authored
commit 72b4f6a5 upstream. On x86_32, when an interrupt happens from kernel space, SS and SP aren't pushed and the existing stack is used. So pt_regs is effectively two words shorter, and the previous stack pointer is normally the memory after the shortened pt_regs, aka '®s->sp'. But in the rare case where the interrupt hits right after the stack pointer has been changed to point to an empty stack, like for example when call_on_stack() is used, the address immediately after the shortened pt_regs is no longer on the stack. In that case, instead of '®s->sp', the previous stack pointer should be retrieved from the beginning of the current stack page. kernel_stack_pointer() wants to do that, but it forgets to dereference the pointer. So instead of returning a pointer to the previous stack, it returns a pointer to the beginning of the current stack. Note that it's probably outside of kernel_stack_pointer()'s scope to be switching stacks at all. The x86_64 version of this function doesn't do it, and it would be better for the caller to do it if necessary. But that's a patch for another day. This just fixes the original intent. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 0788aa6a ("x86: Prepare removal of previous_esp from i386 thread_info structure") Link: http://lkml.kernel.org/r/472453d6e9f6a2d4ab16aaed4935f43117111566.1471535549.git.jpoimboe@redhat.comSigned-off-by:
-
Mika Westerberg authored
commit db91aa79 upstream. When a CPU is about to be offlined we call fixup_irqs() that resets IRQ affinities related to the CPU in question. The same thing is also done when the system is suspended to S-states like S3 (mem). For each IRQ we try to complete any on-going move regardless whether the IRQ is actually part of x86_vector_domain. For each IRQ descriptor we fetch its chip_data, assume it is of type struct apic_chip_data and manipulate it by clearing old_domain mask etc. For irq_chips that are not part of the x86_vector_domain, like those created by various GPIO drivers, will find their chip_data being changed unexpectly. Below is an example where GPIO chip owned by pinctrl-sunrisepoint.c gets corrupted after resume: # cat /sys/kernel/debug/gpio gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00: gpio-511 ( |sysfs ) in hi # rtcwake -s10 -mmem <10 seconds passes> # cat /sys/kernel/debug/gpio gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00: gpio-511 ( |sysfs ) in ? Note '?' in the output. It means the struct gpio_chip ->get function is NULL whereas before suspend it was there. Fix this by first checking that the IRQ belongs to x86_vector_domain before we try to use the chip_data as struct apic_chip_data. Reported-and-tested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Link: http://lkml.kernel.org/r/20161003101708.34795-1-mika.westerberg@linux.intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Dan Williams authored
commit 917db484 upstream. In commit: ec776ef6 ("x86/mm: Add support for the non-standard protected e820 type") Christoph references the original patch I wrote implementing pmem support. The intent of the 'max_pfn' changes in that commit were to enable persistent memory ranges to be covered by the struct page memmap by default. However, that approach was abandoned when Christoph ported the patches [1], and that functionality has since been replaced by devm_memremap_pages(). In the meantime, this max_pfn manipulation is confusing kdump [2] that assumes that everything covered by the max_pfn is "System RAM". This results in kdump hanging or crashing. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-March/000348.html [2]: https://bugzilla.redhat.com/show_bug.cgi?id=1351098 So fix it. Reported-by:
Zhang Yi <yizhan@redhat.com> Reported-by:
Jeff Moyer <jmoyer@redhat.com> Tested-by:
-
Dan Carpenter authored
commit ac0e89bb upstream. We use logical negate where bitwise negate was intended. It means that we never return -EINVAL here. Fixes: ce11e48b ('KVM: PPC: E500: Add userspace debug stub support') Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
James Hogan authored
commit 91e4f1b6 upstream. When a guest TLB entry is replaced by TLBWI or TLBWR, we only invalidate TLB entries on the local CPU. This doesn't work correctly on an SMP host when the guest is migrated to a different physical CPU, as it could pick up stale TLB mappings from the last time the vCPU ran on that physical CPU. Therefore invalidate both user and kernel host ASIDs on other CPUs, which will cause new ASIDs to be generated when it next runs on those CPUs. We're careful only to do this if the TLB entry was already valid, and only for the kernel ASID where the virtual address it mapped is outside of the guest user address range. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
-
