into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from David Vrabel

Fix a minor typo in the MODULE_AUTHOR string in ixp4xx_wdt.

Signed-off-by: David Vrabel
Signed-off-by: Russell King

Patch from Marc Singer

Add support for the LPD7a40x implementation of the SMC91x ethernet
controller. This patch exists to work around a mismatch between the
way the LH7a40x CPUs handle chip selects and what the ethernet
controller expects.

This patch has been revised to eliminate masking of interrupts.  The
concessions are that 

  a) the ISR must perform an IOBARRIER before the first access to the
     chip, just in case the interrupt occurred while the driver was
     writing to the chip
  b) other drivers that use the same chip select region as the SMC
     chip must perform a similar IOBARRIER at the top of their ISRs.

Signed-off-by: Marc Singer
Signed-off-by: Russell King

Patch from Marc Singer

A missing exten prevented the 2.6.10-rc2 kernel from building for the
LPD7A404.  This patch adds it.

Signed-off-by: Marc Singer
Signed-off-by: Russell King

Patch from Holger Hans Peter Freyther

As proposed in 2282 asm-arm/arch-sa1100/ide.h is not included anymore from asm-arm/ide.h. 
If arch-sa1100/ide.h is included we abort with #error.
If lart.c is compiled we kindly warn that ide needs fixing for this board.


Signed-off-by: Holger Hans Peter Freyther
Signed-off-by: Russell King

Patch from Marc Singer

Some typos prevent the 2.6.10-rc2 kernel from building for the
LPD7A400.  This patch fixes them.  It also removes CONFIG_FIQ which
shouldn't be necessary and doesn't compile.

Signed-off-by: Marc Singer
Signed-off-by: Russell King

Some time ago, a patch was merged that removed pci_save_state() and
pci_restore_state() from various ALSA drivers. That patch also added
pci_restore_state() to sound/core/init.c but didn't add pci_save_state()
anywhere. This is needed since the core pci handling doesn't do this for
us anymore.

My laptop doesn't resume (gets what I assume is an ACPI timeout and
hangs solid) without this small obvious patch.
Signed-off-by: Martin Josefsson <gandalf@wlug.westbo.se>
Fixed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Use milliseconds internally for these delays, and convert them
to centiseconds at the interface boundary to the ioctl
configuration controls.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

We have to load the bigkernel second TLB entry on
secondary processors before we move over the use
the kernel trap table.  Otherwise we can take a
TLB miss somewhere in the post-4MB area and the
TLB handler is not prepared to service that.

The case that usually occurs is the prom_set_trap_table
call made by trampoline.S, since p1275buf usually sits
very near the end of the kernel image.  It worked by
luck most of the time as long as p1275buf sits within
a single page since earlier code running in trampoline.S
forced that TLB entry to be loaded by the OBP TLB miss
handler.

This was not fun to figure out.
Signed-off-by: David S. Miller <davem@davemloft.net>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Always pass values to get_user and put_user in an even numbered
register, and optionally the next odd numbered register.  This
ensures that we are compatible with compiler enhancements.

Patch from Ben Dooks

A simple divide is not enough for the s3c2410 default
timer code, due to most clocks not being a nice multiple
of usecs.

This update changes the calculation of the usec to use
multipliers and shifts to effect a fast divide by a non-integer
number.

Original patch by Dimitry Andric, updated by Ben Dooks

Signed-off-by: Dimitry Andric

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Ok, here we go (finally).  A patch to correct the cut-and-paste
copyright in arch/ia64/kernel/domain.c.  Both Silicon Graphics, Inc. 
and myself (yes personally) hold the copyright on this file.
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

sysfs_dir_close did not free the "cursor" sysfs_dirent used for keeping
track of position in the list of sysfs_dirent nodes.  Consequently,
doing a "find /sys" would leak a sysfs_dirent for each of the 1140
directories in my /sys tree, or about 36kB each time.


From: "Adam J. Richter" <adam@yggdrasil.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

proc_pid_status dereferences pointers in the task structure even if the
task is already dead.  This is probably the reason for the oops described
in

http://bugme.osdl.org/show_bug.cgi?id=3812

The attached patch removes the pointer dereferences by using pid_alive()
for testing that the task structure contents is still valid before
dereferencing them.  The task structure itself is guaranteed to be valid -
we hold a reference count.
Signed-Off-By: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Prevent X86_VISWS config from building APM support.  APM isn't supported
and it won't build if attempted.  Also disable P4THERMAL for VISWS.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Acked-by: Andrey Panin <pazke@donpac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Specify an initial value signal_struct's field stop_state whenever a
signal_struct variable is created.

Bug was discovered through the occasional failure of telnet(1) to connect.
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Timothy Lee reports:

Hardware: CyberBlade/i1 on VIA Epia-800

Problem Description:  When the framebuffer is set to 16 bpp, console's text
colours are incorrect.  For example, white becomes yellow, black becomes blue, etc.

Steps to reproduce:
1. Load tridentfb
2. Use "setterm -n -depth 16" to request 16 bpp framebuffer

The problem arose from the fact that each psuedo palette entry should be
32-bit in size, even under 16-bit display mode.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes annoying warnings in ibm_emac driver.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This change brings the semantics equivalent to 2.4 and also to what the man
page says; Also optimises by avoiding unneeded lookup in uid cache, when
who is same as the current->uid.

sys_set/getpriority is rewritten in 2.5/2.6, perhaps while transitioning to
the pid maps.  It has now semantical bug, when uid is zero.  Note that akpm
also fixed refcount leak and locking in the new functions in changeset
http://linus.bkbits.net:8080/linux-2.5/cset@1.1608.10.84

Signed-off-by: <pmeda@akamai.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch avoids a deadlock on rtnl_sem in smc_close() when bringing down
an smc91x interface.  The semaphore is already held by devinet_ioctl() and
the pending work queue contains linkwatch_event() (scheduled by
netif_carrier_off()) which also wants rtnl_sem hence it is unsafe to call
flush_scheduled_work().

The solution is to track whether we have any pending work of our own and
wait for that instead of flushing the entire queue.

I also fixed a typo 'ence' -> 'Hence' and renamed smc_detect_phy to
smc_phy_detect in order to follow the same pattern as the other smc_phy_*
functions.
Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

HP Lance Ethernet depends on DIO bus support
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

M68k Ethernet drivers depend on NET_ETHERNET instead of NETDEVICES
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

We check need_resched() _before_ disabling preemption.  This opens up the
following scenario:

 swapper:	!need_resched()
 [IRQ context]
		wakes up a task
		marks idle task as need-resched

 swapper:	acpi_processor_idle(); // sleeps until next irq

instant 1msec latency introduced...

normally default_idle() is safe because it re-checks need_resched with
interrupts disabled before it truly halts the CPU.  But
acpi_processor_idle() doesnt seem to be doing this!  Your trace clearly
shows a missed preemption due to ACPI.  I'm wondering why no-one has
triggered this before, it's a really bad bug that should be fixed in
2.6.10.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The generic irq affinity code limits us to a single cpu target regardless
of what the architecture supports.  If required this should be done in the
architecture specific ->set_affinity call.

With this patch ppc64 is able to select all cpus affinity again.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Thomas Spatzier <tspat@de.ibm.com>

network driver changes:
 - qeth: Handle both VLAN_FRAME and INCLUDES_VLAN_TAG in qdio header.
 - qeth: Always save IP addresses registered on a card when going offline.
 - qeth: Check size of printk buffer to 4K for ipa_takeover, vipa & rxip.


From: Thomas Spatzier <tspat@de.ibm.com>,
      Heiko Carstens <heiko.carstens@de.ibm.com>

Thomas created the patch below which removes the hardcoded 3900 bytes
limit as suggested by Jeff Garzik. Please apply.

network driver changes:
 - qeth: Calculate end of sysfs data buffer correctly.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Thomas Spatzier <tspat@de.ibm.com>
From: Peter Tiedemann <ptiedem@de.ibm.com>

network driver changes:
 - qeth: return -EINVAL if an skb is too large.
 - qeth: don't call netif_stop_queue after cable pull. Drop the
   packets instead.
 - qeth: fix race between SET_IP and SET_MC kernel thread by removing
   SET_MC thread and let the SET_IP thread do multicast requests as well.
 - qeth: make it compile without CONFIG_VLAN.
 - ctc: avoid compiler warnings.
 - lcs: write package sequence number to skb->cb.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Gerald Schaefer <geraldsc@de.ibm.com>

z/VM monitor stream changes:
 - Add monitor control element to deal with end-of-frame records.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Horst Hummel <horst.hummel@de.ibm.com>
From: Stefan Weinhuber <wein@de.ibm.com>

dasd driver changes:
 - Introduce "fixbuffers" dasd option that uses buffer pages for
   the dasd i/o similar to bounce buffers.
 - Fix I/O errors when using XRC.
 - Increment retry counter again if notifier callback is called with CIO_GONE.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Carsten Otte <cotte@de.ibm.com>

dcss segment interface changes:
 - Add check when loading segments to avoid out of range mappings.
 - Add code to check for segment_load returning -ERANGE.
 - Rename segment_info to segment_type.
 - Restore previous segment state if reload fails.
 - Add segment_modify_shared() to change shared attributes of a dcss
   segment and use it in the dcss block device driver.
 - Add support for contiguous EW/EN multipart segments.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Cornelia Huck <cohuck@de.ibm.com>
From: Steffen Thoss <thoss@de.ibm.com>

common i/o layer changes:
 - Delay re-registration of a subchannel with a different subchannel id
   until the ccw device removal triggered from the subchannels remove
   function has completed.
 - Fix check when to call unreg_rereg.
 - Fix get_disc_cdev_by_devno.
 - Activate the time delay disablement facility. This saves a few cycles
   in millicode processing.
 - Don't ifdef reset of busy start time.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Martin Schwidefsky <schwidefsky@de.ibm.com>
From: Ulrich Weigand <uweigand@de.ibm.com>

s390 core changes:
 - Remove defines for kernel_stack_size and async_stack_size.
 - Reserve system call number for kexec.
 - Add cc-option check for new gcc option packed-stack.
 - Fix race on no_hz_cpu_mask in stop_hz_timer.
 - Fix ptrace to make it send a SIGTRAP before the first instruction
   of a single stepped signal handler is executed.
 - Use force_sig_info with a full siginfo structure for illegal operation.
 - Remove verbatim copy of si_codes from asm-s390/siginfo.h. Use the
   generic definitions.
 - Regenerate default configuration.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

What that patch does is making the first open _always_ assume that we need to
revalidate/reread partition table and kills partition-parsing in
register_disk(); instead we just have it do open/close and let the
revalidation path in open do the job.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

For reasons which escape me, blockdev_get_blocks() is returning -EIO if the
mapping request straddles the end of the disk.  This causes reads which
straddle end-of-disk to return -EIO.

Fix it up so that it correctly trims the returned result down to match the
size of the device, for both reads and writes.

If a write attempt is fully beyond end-of-device then return -EIO.  We never
get this far anyway, because generic_write_checks() will return -ENOSPC if all
of the write lies outside a blockdev's i_size.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>