Pull power supply and reset updates from Sebastian Reichel:
 "Not much from the power-supply subsystem this time around, since I was
  busy most of the cycle. This also contains some fixes that I
  originally planned to send for 5.18. Apart from this there is nothing
  noteworthy.

  Power-supply core:

   - init power_supply_info struct to zero

  Drivers:

   - bq27xxx: expose data for uncalibrated battery

   - bq24190-charger: use pm_runtime_resume_and_get

   - ab8500_fg: allocate wq in probe

   - axp288_fuel_gauge: drop BIOS version from 'T3 MRD' quirk

   - axp288_fuel_gauge: modify 'T3 MRD' quirk to also fix 'One Mix 1'"

* tag 'for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: bq24190_charger: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
  power: supply: bq27xxx: expose battery data when CI=1
  power: supply: ab8500_fg: Allocate wq in probe
  power: supply: axp288_fuel_gauge: Drop BIOS version check from "T3 MRD" DMI quirk
  power: supply: axp288_fuel_gauge: Fix battery reporting on the One Mix 1
  power: supply: core: Initialize struct to zero

Pull watchdog updates from Wim Van Sebroeck:

 - Add MediaTek MT8186 support

 - Add Mediatek MT7986 reset-controller support

 - Add i.MX93 support

 - Add watchdog driver for Sunplus SP7021

 - Add SC8180X and SC8280XP compatibles

 - Add Renesas RZ/N1 Watchdog driver and support for RZ/N1

 - rzg2l_wdt improvements and fixes

 - Several other improvements and fixes

* tag 'linux-watchdog-5.19-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits)
  watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe
  dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  watchdog: Add Renesas RZ/N1 Watchdog driver
  dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  watchdog: wdat_wdt: Stop watchdog when uninstalling module
  watchdog: wdat_wdt: Stop watchdog when rebooting the system
  watchdog: wdat_wdt: Using the existing function to check parameter timeout
  dt-bindings: watchdog: da9062: add watchdog timeout mode
  dt-bindings: watchdog: renesas,wdt: Document RZ/G2UL SoC
  watchdog: iTCO_wdt: Using existing macro define covers more scenarios
  watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking
  dt-bindings: watchdog: Add SC8180X and SC8280XP compatibles
  watchdog: rti_wdt: Fix calculation and evaluation of preset heartbeat
  dt-bindings: watchdog: uniphier: Use unevaluatedProperties
  watchdog: sp805: disable watchdog on remove
  watchdog: da9063: optionally disable watchdog during suspend
  dt-bindings: mfd: da9063: watchdog: add suspend disable option
  dt-bindings: watchdog: sunxi: clarify clock support
  dt-bindings: watchdog: sunxi: fix F1C100s compatible
  watchdog: Add watchdog driver for Sunplus SP7021
  ...

Pull vfio updates from Alex Williamson:

 - Improvements to mlx5 vfio-pci variant driver, including support for
   parallel migration per PF (Yishai Hadas)

 - Remove redundant iommu_present() check (Robin Murphy)

 - Ongoing refactoring to consolidate the VFIO driver facing API to use
   vfio_device (Jason Gunthorpe)

 - Use drvdata to store vfio_device among all vfio-pci and variant
   drivers (Jason Gunthorpe)

 - Remove redundant code now that IOMMU core manages group DMA ownership
   (Jason Gunthorpe)

 - Remove vfio_group from external API handling struct file ownership
   (Jason Gunthorpe)

 - Correct typo in uapi comments (Thomas Huth)

 - Fix coccicheck detected deadlock (Wan Jiabing)

 - Use rwsem to remove races and simplify code around container and kvm
   association to groups (Jason Gunthorpe)

 - Harden access to devices in low power states and use runtime PM to
   enable d3cold support for unused devices (Abhishek Sahu)

 - Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)

 - Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)

 - Pass KVM pointer directly rather than via notifier (Matthew Rosato)

* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
  vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
  vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
  vfio: Do not manipulate iommu dma_owner for fake iommu groups
  vfio/pci: Move the unused device into low power state with runtime PM
  vfio/pci: Virtualize PME related registers bits and initialize to zero
  vfio/pci: Change the PF power state to D0 before enabling VFs
  vfio/pci: Invalidate mmaps and block the access in D3hot power state
  vfio: Change struct vfio_group::container_users to a non-atomic int
  vfio: Simplify the life cycle of the group FD
  vfio: Fully lock struct vfio_group::container
  vfio: Split up vfio_group_get_device_fd()
  vfio: Change struct vfio_group::opened from an atomic to bool
  vfio: Add missing locking for struct vfio_group::kvm
  kvm/vfio: Fix potential deadlock problem in vfio
  include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
  vfio/pci: Use the struct file as the handle not the vfio_group
  kvm/vfio: Remove vfio_group from kvm
  vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
  vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
  vfio: Remove vfio_external_group_match_file()
  ...

Pull more erofs updates from Gao Xiang:
 "This is a follow-up to the main updates, including some fixes of
  fscache mode related to compressed inodes and a cachefiles tracepoint.
  There is also a patch to fix an unexpected decompression strategy
  change due to a cleanup in the past. All the fixes are quite small.

  Apart from these, documentation is also updated for a better
  description of recent new features.

  In addition, this has some trivial cleanups without actual code logic
  changes, so I could have a more recent codebase to work on folios and
  avoiding the PG_error page flag for the next cycle.

  Summary:

   - Leave compressed inodes unsupported in fscache mode for now

   - Avoid crash when using tracepoint cachefiles_prep_read

   - Fix `backmost' behavior due to a recent cleanup

   - Update documentation for better description of recent new features

   - Several decompression cleanups w/o logical change"

* tag 'erofs-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix 'backmost' member of z_erofs_decompress_frontend
  erofs: simplify z_erofs_pcluster_readmore()
  erofs: get rid of label `restart_now'
  erofs: get rid of `struct z_erofs_collection'
  erofs: update documentation
  erofs: fix crash when enable tracepoint cachefiles_prep_read
  erofs: leave compressed inodes unsupported in fscache mode for now

Pull ksmbd server updates from Steve French:

 - rdma (smbdirect) fixes, cleanup and optimizations

 - crediting (flow control) fix for mounts from Windows client

 - ACL fix

 - Windows client query dir fix

 - write validation fix

 - cleanups

* tag '5.19-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: smbd: relax the count of sges required
  ksmbd: fix outstanding credits related bugs
  ksmbd: smbd: fix connection dropped issue
  ksmbd: Fix some kernel-doc comments
  ksmbd: fix wrong smbd max read/write size check
  ksmbd: add smbd max io size parameter
  ksmbd: handle smb2 query dir request for OutputBufferLength that is too small
  ksmbd: smbd: handle multiple Buffer descriptors
  ksmbd: smbd: change the return value of get_sg_list
  ksmbd: smbd: simplify tracking pending packets
  ksmbd: smbd: introduce read/write credits for RDMA read/write
  ksmbd: smbd: change prototypes of RDMA read/write related functions
  ksmbd: validate length in smb2_write()
  ksmbd: fix reference count leak in smb_check_perm_dacl()

In AFS, a directory is handled as a file that the client downloads and
parses locally for the purposes of performing lookup and getdents
operations.  The in-kernel afs filesystem has a number of functions that
do this.

A directory file is arranged as a series of 2K blocks divided into
32-byte slots, where a directory entry occupies one or more slots, plus
each block starts with one or more metadata blocks.

When parsing a block, if the last slots are occupied by a dirent that
occupies more than a single slot and the file position points at a slot
that's not the initial one, the logic in afs_dir_iterate_block() that
skips over it won't advance the file pointer to the end of it.  This
will cause an infinite loop in getdents() as it will keep retrying that
block and failing to advance beyond the final entry.

Fix this by advancing the file pointer if the next entry will be beyond
it when we skip a block.

This was found by the generic/676 xfstest but can also be triggered with
something like:

	~/xfstests-dev/src/t_readdir_3 /xfstest.test/z 4000 1

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lore.kernel.org/r/165391973497.110268.2939296942213894166.stgit@warthog.procyon.org.uk/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Quite a large number of conversions this time around, courtesy of Uwe
  who has been working tirelessly on these. No drivers of the legacy API
  are left at this point, so as a next step the old API can be removed.

  Support is added for a few new devices such as the Xilinx AXI timer-
  based PWMs and the PWM IP found on Sunplus SoCs.

  Other than that, there's a number of fixes, cleanups and optimizations"

* tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (43 commits)
  pwm: pwm-cros-ec: Add channel type support
  dt-bindings: google,cros-ec-pwm: Add the new -type compatible
  dt-bindings: Add mfd/cros_ec definitions
  pwm: Document that the pinstate of a disabled PWM isn't reliable
  pwm: twl-led: Implement .apply() callback
  pwm: lpc18xx: Implement .apply() callback
  pwm: mediatek: Implement .apply() callback
  pwm: lpc32xx: Implement .apply() callback
  pwm: tegra: Implement .apply() callback
  pwm: stmpe: Implement .apply() callback
  pwm: sti: Implement .apply() callback
  pwm: pwm-mediatek: Add support for MediaTek Helio X10 MT6795
  dt-bindings: pwm: pwm-mediatek: Add documentation for MT6795 SoC
  pwm: tegra: Optimize period calculation
  pwm: renesas-tpu: Improve precision of period and duty_cycle calculation
  pwm: renesas-tpu: Improve maths to compute register settings
  pwm: renesas-tpu: Rename variables to match the usual naming
  pwm: renesas-tpu: Implement .apply() callback
  pwm: renesas-tpu: Make use of devm functions
  pwm: renesas-tpu: Make use of dev_err_probe()
  ...

Pull rpmsg updates from Bjorn Andersson:
 "This corrects the check for irq_of_parse_and_map() failures in the
  Qualcomm SMD driver and fixes unregistration and a couple of double
  free in the virtio rpmsg driver"

* tag 'rpmsg-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: qcom_smd: Fix returning 0 if irq_of_parse_and_map() fails
  rpmsg: virtio: Fix the unregistration of the device rpmsg_ctrl
  rpmsg: virtio: Fix possible double free in rpmsg_virtio_add_ctrl_dev()
  rpmsg: virtio: Fix possible double free in rpmsg_probe()
  rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value

Pull remoteproc updates from Bjorn Andersson:
 "This fixes a race condition in the user space interface for starting
  and stopping remote processors, it makes the ELF loader properly skip
  zero memsz segments and it cleans up the debugfs tracefile code a bit
  by not checking for errors.

  It introduces support for controlling the audio DSP on Qualcomm
  MSM8226, as well as audio and compute DSPs on Qualcomm SC8280XP.

  It makes it possible to specify the firmware path for Mediatek's
  remote processors, fixes a double free in the SCP driver and addresses
  an issue with the SRAM initialization on MT8195.

  Lastly it deprecates the custom ELF loader in the iMX remoteproc
  driver, in favor of using the shared one"

* tag 'rproc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (21 commits)
  dt-bindings: remoteproc: mediatek: Add optional memory-region to mtk,scp
  dt-bindings: remoteproc: mediatek: Make l1tcm reg exclusive to mt819x
  dt-bindings: remoteproc: st,stm32-rproc: Fix phandle-array parameters description
  remoteproc: imx_rproc: Support i.MX93
  dt-bindings: remoteproc: imx_rproc: Support i.MX93
  remoteproc: qcom: pas: Add MSM8226 ADSP support
  dt-bindings: remoteproc: qcom: pas: Add MSM8226 adsp
  remoteproc: mediatek: Allow reading firmware-name from DT
  dt-bindings: remoteproc: mediatek: Add firmware-name property
  remoteproc: qcom: pas: Add sc8280xp remoteprocs
  dt-bindings: remoteproc: qcom: pas: Add sc8280xp adsp and nsp pair
  dt-bindings: remoteproc: mediatek: Add interrupts property to mtk,scp
  remoteproc: imx_rproc: Ignore create mem entry for resource table
  remoteproc: core: Move state checking to remoteproc_core
  remoteproc: core: Remove state checking before calling rproc_boot()
  remoteproc: imx_dsp_rproc: Make rsc_table optional
  remoteproc: imx_dsp_rproc: use common rproc_elf_load_segments
  remoteproc: elf_loader: skip segment with memsz as zero
  remoteproc: mtk_scp: Fix a potential double free
  remoteproc: Don't bother checking the return value of debugfs_create*
  ...

Pull spi fixes from Mark Brown:
 "A couple of fixes that came in during the merge window: a driver fix
  for spurious timeouts in the fsi driver and an improvement to make the
  core display error messages for transfer_one_message() to help people
  debug things"

* tag 'spi-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: core: Display return code when failing to transfer message
  spi: fsi: Fix spurious timeout

Pull pcmcia updates from Dominik Brodowski:
 "A few odd cleanups and fixes, including a Kconfig fix to add a
  required dependency on MIPS"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: Use platform_get_irq() to get the interrupt
  pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards
  drivers/pcmcia: Fix typo in comment

Pull NFS client updates from Anna Schumaker:
 "New Features:
   - Add support for 'dacl' and 'sacl' attributes

  Bugfixes and Cleanups:
   - Fixes for reporting mapping errors
   - Fixes for memory allocation errors
   - Improve warning message when locks are lost
   - Update documentation for the nfs4_unique_id parameter
   - Add an explanation of NFSv4 client identifiers
   - Ensure the i_size attribute is written to the fscache storage
   - Fix freeing uninitialized nfs4_labels
   - Better handling when xprtrdma bc_serv is NULL
   - Mark qualified async operations as MOVEABLE tasks"

* tag 'nfs-for-5.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.1 mark qualified async operations as MOVEABLE tasks
  xprtrdma: treat all calls not a bcall when bc_serv is NULL
  NFSv4: Fix free of uninitialized nfs4_label on referral lookup.
  NFS: Pass i_size to fscache_unuse_cookie() when a file is released
  Documentation: Add an explanation of NFSv4 client identifiers
  NFS: update documentation for the nfs4_unique_id parameter
  NFS: Improve warning message when locks are lost.
  NFSv4.1: Enable access to the NFSv4.1 'dacl' and 'sacl' attributes
  NFSv4: Add encoders/decoders for the NFSv4.1 dacl and sacl attributes
  NFSv4: Specify the type of ACL to cache
  NFSv4: Don't hold the layoutget locks across multiple RPC calls
  pNFS/files: Fall back to I/O through the MDS on non-fatal layout errors
  NFS: Further fixes to the writeback error handling
  NFSv4/pNFS: Do not fail I/O when we fail to allocate the pNFS layout
  NFS: Memory allocation failures are not server fatal errors
  NFS: Don't report errors from nfs_pageio_complete() more than once
  NFS: Do not report flush errors in nfs_write_end()
  NFS: Don't report ENOSPC write errors twice
  NFS: fsync() should report filesystem errors over EINTR/ERESTARTSYS
  NFS: Do not report EINTR/ERESTARTSYS as mapping errors

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've refactored the existing atomic write support
  implemented by in-memory operations to have storing data in disk
  temporarily, which can give us a benefit to accept more atomic writes.

  At the same time, we removed the existing volatile write support.

  We've also revisited the file pinning and GC flows and found some
  corner cases which contributeed abnormal system behaviours.

  As usual, there're several minor code refactoring for readability,
  sanity check, and clean ups.

  Enhancements:

   - allow compression for mmap files in compress_mode=user

   - kill volatile write support

   - change the current atomic write way

   - give priority to select unpinned section for foreground GC

   - introduce data read/write showing path info

   - remove unnecessary f2fs_lock_op in f2fs_new_inode

  Bug fixes:

   - fix the file pinning flow during checkpoint=disable and GCs

   - fix foreground and background GCs to select the right victims and
     get free sections on time

   - fix GC flags on defragmenting pages

   - avoid an infinite loop to flush node pages

   - fix fallocate to use file_modified to update permissions
     consistently"

* tag 'f2fs-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (40 commits)
  f2fs: fix to tag gcing flag on page during file defragment
  f2fs: replace F2FS_I(inode) and sbi by the local variable
  f2fs: add f2fs_init_write_merge_io function
  f2fs: avoid unneeded error handling for revoke_entry_slab allocation
  f2fs: allow compression for mmap files in compress_mode=user
  f2fs: fix typo in comment
  f2fs: make f2fs_read_inline_data() more readable
  f2fs: fix to do sanity check for inline inode
  f2fs: fix fallocate to use file_modified to update permissions consistently
  f2fs: don't use casefolded comparison for "." and ".."
  f2fs: do not stop GC when requiring a free section
  f2fs: keep wait_ms if EAGAIN happens
  f2fs: introduce f2fs_gc_control to consolidate f2fs_gc parameters
  f2fs: reject test_dummy_encryption when !CONFIG_FS_ENCRYPTION
  f2fs: kill volatile write support
  f2fs: change the current atomic write way
  f2fs: don't need inode lock for system hidden quota
  f2fs: stop allocating pinned sections if EAGAIN happens
  f2fs: skip GC if possible when checkpoint disabling
  f2fs: give priority to select unpinned section for foreground GC
  ...

Pull LED updates from Pavel Machek:
 "Most significant here is the driver for Qualcomm LPG. Apparently it
  drives backlight on some boards, so it is quite important for some
  people"

* tag 'leds-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: qcom-lpg: Require pattern to follow documentation
  leds: lp50xx: Remove duplicated error reporting in .remove()
  leds: qcom-lpg: add missing PWM dependency
  leds: ktd2692: Make aux-gpios optional
  dt-bindings: leds: convert ktd2692 bindings to yaml
  leds: ktd2692: Avoid duplicate error messages on probe deferral
  leds: is31fl32xx: Improve error reporting in .remove()
  leds: Move pwm-multicolor driver into rgb directory
  leds: Add PWM multicolor driver
  dt-bindings: leds: Add multicolor PWM LED bindings
  dt-bindings: leds: Optional multi-led unit address
  leds: regulator: Make probeable from device tree
  leds: regulator: Add dev helper variable
  dt-bindings: leds: Add regulator-led binding
  leds: pca9532: Make pca9532_destroy_devices() return void
  leds: Add pm8350c support to Qualcomm LPG driver
  dt-bindings: leds: Add pm8350c pmic support
  leds: Add driver for Qualcomm LPG
  dt-bindings: leds: Add Qualcomm Light Pulse Generator binding

Pull i2c updates from Wolfram Sang:
 "Only driver updates for 5.19.

  Bigger changes are for Meson, NPCM, and R-Car, but there are also
  changes all over the place"

* tag 'i2c-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
  i2c: meson: fix typo in comment
  i2c: rcar: use flags instead of atomic_xfer
  i2c: rcar: REP_AFTER_RD is not a persistent flag
  i2c: rcar: use BIT macro consistently
  i2c: qcom-geni: remove unnecessary conditions
  i2c: mt7621: Use devm_platform_get_and_ioremap_resource()
  i2c: rcar: refactor handling of first message
  i2c: rcar: avoid race condition with SMIs
  i2c: xiic: Correct the datatype for rx_watermark
  i2c: rcar: fix PM ref counts in probe error paths
  i2c: npcm: Handle spurious interrupts
  i2c: npcm: Correct register access width
  i2c: npcm: Add tx complete counter
  i2c: npcm: Fix timeout calculation
  i2c: npcm: Remove unused variable clk_regmap
  i2c: npcm: Change the way of getting GCR regmap
  i2c: xiic: Fix Tx Interrupt path for grouped messages
  i2c: xiic: Fix coding style issues
  i2c: xiic: return value of xiic_reinit
  i2c: cadence: Increase timeout per message if necessary
  ...

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the Svpbmt extension, which allows memory attributes to
   be encoded in pages

 - Support for the Allwinner D1's implementation of page-based memory
   attributes

 - Support for running rv32 binaries on rv64 systems, via the compat
   subsystem

 - Support for kexec_file()

 - Support for the new generic ticket-based spinlocks, which allows us
   to also move to qrwlock. These should have already gone in through
   the asm-geneic tree as well

 - A handful of cleanups and fixes, include some larger ones around
   atomics and XIP

* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
  RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
  riscv: compat: Using seperated vdso_maps for compat_vdso_info
  RISC-V: Fix the XIP build
  RISC-V: Split out the XIP fixups into their own file
  RISC-V: ignore xipImage
  RISC-V: Avoid empty create_*_mapping definitions
  riscv: Don't output a bogus mmu-type on a no MMU kernel
  riscv: atomic: Add custom conditional atomic operation implementation
  riscv: atomic: Optimize dec_if_positive functions
  riscv: atomic: Cleanup unnecessary definition
  RISC-V: Load purgatory in kexec_file
  RISC-V: Add purgatory
  RISC-V: Support for kexec_file on panic
  RISC-V: Add kexec_file support
  RISC-V: use memcpy for kexec_file mode
  kexec_file: Fix kexec_file.c build error for riscv platform
  riscv: compat: Add COMPAT Kbuild skeletal support
  riscv: compat: ptrace: Add compat_arch_ptrace implement
  riscv: compat: signal: Add rt_frame implementation
  riscv: add memory-type errata for T-Head
  ...

Mark async operations such as RENAME, REMOVE, COMMIT MOVEABLE
for the nfsv4.1+ sessions.

Fixes: 85e39fee ("NFSv4.1 identify and mark RPC tasks that can move between transports")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

When a rdma server returns a fault format reply, nfs v3 client may
treats it as a bcall when bc service is not exist.

The debug message at rpcrdma_bc_receive_call are,

[56579.837169] RPC:       rpcrdma_bc_receive_call: callback XID
00000001, length=20
[56579.837174] RPC:       rpcrdma_bc_receive_call: 00 00 00 01 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 04

After that, rpcrdma_bc_receive_call will meets NULL pointer as,

[  226.057890] BUG: unable to handle kernel NULL pointer dereference at
00000000000000c8
...
[  226.058704] RIP: 0010:_raw_spin_lock+0xc/0x20
...
[  226.059732] Call Trace:
[  226.059878]  rpcrdma_bc_receive_call+0x138/0x327 [rpcrdma]
[  226.060011]  __ib_process_cq+0x89/0x170 [ib_core]
[  226.060092]  ib_cq_poll_work+0x26/0x80 [ib_core]
[  226.060257]  process_one_work+0x1a7/0x360
[  226.060367]  ? create_worker+0x1a0/0x1a0
[  226.060440]  worker_thread+0x30/0x390
[  226.060500]  ? create_worker+0x1a0/0x1a0
[  226.060574]  kthread+0x116/0x130
[  226.060661]  ? kthread_flush_work_fn+0x10/0x10
[  226.060724]  ret_from_fork+0x35/0x40
...
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Send along the already-allocated fattr along with nfs4_fs_locations, and
drop the memcpy of fattr.  We end up growing two more allocations, but this
fixes up a crash as:

PID: 790    TASK: ffff88811b43c000  CPU: 0   COMMAND: "ls"
 #0 [ffffc90000857920] panic at ffffffff81b9bfde
 #1 [ffffc900008579c0] do_trap at ffffffff81023a9b
 #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78
 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45
 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de
 #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs]
 #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f
 #7 [ffffc90000857c60] walk_component at ffffffff813a86c4
 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553
 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Fixes: 9558a007 ("NFS: Remove the label from the nfs4_lookup_res struct")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Pull iommu updates from Joerg Roedel:

 - Intel VT-d driver updates:
     - Domain force snooping improvement.
     - Cleanups, no intentional functional changes.

 - ARM SMMU driver updates:
     - Add new Qualcomm device-tree compatible strings
     - Add new Nvidia device-tree compatible string for Tegra234
     - Fix UAF in SMMUv3 shared virtual addressing code
     - Force identity-mapped domains for users of ye olde SMMU legacy
       binding
     - Minor cleanups

 - Fix a BUG_ON in the vfio_iommu_group_notifier:
     - Groundwork for upcoming iommufd framework
     - Introduction of DMA ownership so that an entire IOMMU group is
       either controlled by the kernel or by user-space

 - MT8195 and MT8186 support in the Mediatek IOMMU driver

 - Make forcing of cache-coherent DMA more coherent between IOMMU
   drivers

 - Fixes for thunderbolt device DMA protection

 - Various smaller fixes and cleanups

* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
  iommu/amd: Increase timeout waiting for GA log enablement
  iommu/s390: Tolerate repeat attach_dev calls
  iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
  iommu/vt-d: Remove domain_update_iommu_snooping()
  iommu/vt-d: Check domain force_snooping against attached devices
  iommu/vt-d: Block force-snoop domain attaching if no SC support
  iommu/vt-d: Size Page Request Queue to avoid overflow condition
  iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
  iommu/vt-d: Change return type of dmar_insert_one_dev_info()
  iommu/vt-d: Remove unneeded validity check on dev
  iommu/dma: Explicitly sort PCI DMA windows
  iommu/dma: Fix iova map result check bug
  iommu/mediatek: Fix NULL pointer dereference when printing dev_name
  iommu: iommu_group_claim_dma_owner() must always assign a domain
  iommu/arm-smmu: Force identity domains for legacy binding
  iommu/arm-smmu: Support Tegra234 SMMU
  dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
  dt-bindings: arm-smmu: Document nvidia,memory-controller property
  iommu/arm-smmu-qcom: Add SC8280XP support
  dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
  ...

Pull microblaze updates from Michal Simek:

 - Fix issues with freestanding

 - Wire memblock_dump_all()

 - Add support for memory reservation from DT

* tag 'microblaze-v5.19' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: fix typos in comments
  microblaze: Add support for reserved memory defined by DT
  microblaze: Wire memblock_dump_all()
  microblaze: Use simple memmove/memcpy implementation from lib/string.c
  microblaze: Do loop unrolling for optimized memset implementation
  microblaze: Use simple memset implementation from lib/string.c

Initialize 'backmost' to true in DECOMPRESS_FRONTEND_INIT.

Fixes: 5c6dcc57 ("erofs: get rid of `struct z_erofs_collector'")
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220530075114.918874-1-o451686892@gmail.comSigned-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

Get rid of unnecessary label `skip'. No logic changes.

Link: https://lore.kernel.org/r/20220529055425.226363-4-xiang@kernel.orgAcked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

Simplify this part of code. No logic changes.

Link: https://lore.kernel.org/r/20220529055425.226363-3-xiang@kernel.orgAcked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

It was incompletely introduced for deduplication between different
logical extents backed with the same pcluster.

We will have a better in-memory representation in the next release
cycle for this, as well as partial memory folios support. So get rid
of it instead.

No logic changes.

Link: https://lore.kernel.org/r/20220529055425.226363-2-xiang@kernel.orgAcked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

Without this change arch/riscv/kernel/elf_kexec.c fails to compile once
commit 233c1e6c319c ("kexec_file: drop weak attribute from
arch_kexec_apply_relocations[_add]") is also contained in the tree.
This currently happens in next-20220527.

Prepare the RISC-V similar to the s390 adaption done in 233c1e6c319c.
This is safe to do on top of the riscv change even without the change to
arch_kexec_apply_relocations.

Fixes: 838b3e28 ("RISC-V: Load purgatory in kexec_file")
Looks-good-to: liaochang (A) <liaochang1@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull fbdev fixes and updates from Helge Deller:
 "A buch of small fixes and cleanups, including:

   - vesafb: Fix a use-after-free due early fb_info cleanup

   - clcdfb: Fix refcount leak in clcdfb_of_vram_setup

   - hyperv_fb: Allow resolutions with size > 64 MB for Gen1

   - pxa3xx-gcu: release the resources correctly in
     pxa3xx_gcu_probe/remove()

   - omapfb: Prevent compiler warning regarding
     hwa742_update_window_async()"

* tag 'for-5.19/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  video: fbdev: omap: Add prototype for hwa742_update_window_async()
  video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup
  video: fbdev: radeon: Fix spelling typo in comment
  video: fbdev: xen: remove setting of 'transp' parameter
  video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
  video: fbdev: omapfb: simplify the return expression of nec_8048_connect()
  video: fbdev: omapfb: simplify the return expression of dsi_init_pll_data()
  video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
  video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1

Pull parisc architecture updates from Helge Deller:
 "Minor cleanups and code optimizations, e.g.:

   - improvements in assembly statements in the tmpalias code path

   - added some additionals compile time checks

   - drop some unneccesary assembler DMA syncs"

* tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT
  parisc: Optimize tmpalias function calls
  parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels
  parisc: Fix wrong comment for shr macro
  parisc: Prevent ldil() to sign-extend into upper 32 bits
  parisc: Don't hardcode assembler bit definitions in tmpalias code
  parisc: Don't enforce DMA completion order in cache flushes
  parisc: video: fbdev: stifb: Add sti_dump_font() to dump STI font

Pull more power management updates from Rafael Wysocki:
 "These update the ARM cpufreq drivers and fix up the CPPC cpufreq
  driver after recent changes, update the OPP code and PM documentation
  and add power sequences support to the system reboot and power off
  code.

  Specifics:

   - Add Tegra234 cpufreq support (Sumit Gupta)

   - Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
     Rex-BC Chen, and Jia-Wei Chang)

   - Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
     Pierre Gondois)

   - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
     Oudjana)

   - Use list iterator only inside the list_for_each_entry loop
     (Xiaomeng Tong, and Jakob Koschel)

   - New APIs related to finding OPP based on interconnect bandwidth
     (Krzysztof Kozlowski)

   - Fix the missing of_node_put() in _bandwidth_supported() (Dan
     Carpenter)

   - Cleanups (Krzysztof Kozlowski, and Viresh Kumar)

   - Add Out of Band mode description to the intel-speed-select utility
     documentation (Srinivas Pandruvada)

   - Add power sequences support to the system reboot and power off code
     and make related platform-specific changes for multiple platforms
     (Dmitry Osipenko, Geert Uytterhoeven)"

* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
  cpufreq: CPPC: Fix unused-function warning
  cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
  Documentation: admin-guide: PM: Add Out of Band mode
  kernel/reboot: Change registration order of legacy power-off handler
  m68k: virt: Switch to new sys-off handler API
  kernel/reboot: Add devm_register_restart_handler()
  kernel/reboot: Add devm_register_power_off_handler()
  soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
  reboot: Remove pm_power_off_prepare()
  regulator: pfuze100: Use devm_register_sys_off_handler()
  ACPI: power: Switch to sys-off handler API
  memory: emif: Use kernel_can_power_off()
  mips: Use do_kernel_power_off()
  ia64: Use do_kernel_power_off()
  x86: Use do_kernel_power_off()
  sh: Use do_kernel_power_off()
  m68k: Switch to new sys-off handler API
  powerpc: Use do_kernel_power_off()
  xen/x86: Use do_kernel_power_off()
  parisc: Use do_kernel_power_off()
  ...

Pull additional thermal control update from Rafael Wysocki:
 "Add Meteor Lake PCI device ID to the int340x thermal control driver
  (Sumeet Pawnikar)"

* tag 'thermal-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: int340x: Add Meteor Lake PCI device ID

Pull more ACPI updates from Rafael Wysocki:
 "These add some new device IDs, update a few drivers (processor,
  battery, backlight) and clean up code in a few places.

  Specifics:

   - Add Meteor Lake ACPI IDs for DPTF devices (Sumeet Pawnikar)

   - Rearrange find_child_checks() to simplify code (Rafael Wysocki)

   - Use memremap() to map the UCSI mailbox that is always in main
     memory and drop acpi_release_memory() that has no more users
     (Heikki Krogerus, Dan Carpenter)

   - Make max_cstate/nocst/bm_check_disable processor module parameters
     visible in sysfs (Yajun Deng)

   - Fix typo in the CPPC driver (Julia Lawall)

   - Make the ACPI battery driver show the "not-charging" status by
     default unless "charging" or "full" is directly indicated (Werner
     Sembach)

   - Improve the PM notifier in the ACPI backlight driver (Zhang Rui)

   - Clean up some white space in the ACPI code (Ian Cowan)"

* tag 'acpi-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe
  ACPI: DPTF: Support Meteor Lake
  ACPI: CPPC: fix typo in comment
  ACPI: video: improve PM notifer callback
  ACPI: clean up white space in a few places for consistency
  ACPI: glue: Rearrange find_child_checks()
  ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs
  ACPI: battery: Make "not-charging" the default on no charging or full info
  ACPI: OSL: Remove the helper for deactivating memory region
  usb: typec: ucsi: acpi: Map the mailbox with memremap()

Pull overlayfs updates from Miklos Szeredi:

 - Support idmapped layers in overlayfs (Christian Brauner)

 - Add a fix to exportfs that is relevant to open_by_handle_at(2) as
   well

 - Introduce new lookup helpers that allow passing mnt_userns into
   inode_permission()

* tag 'ovl-update-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: support idmapped layers
  ovl: handle idmappings in ovl_xattr_{g,s}et()
  ovl: handle idmappings in layer open helpers
  ovl: handle idmappings in ovl_permission()
  ovl: use ovl_copy_{real,upper}attr() wrappers
  ovl: store lower path in ovl_inode
  ovl: handle idmappings for layer lookup
  ovl: handle idmappings for layer fileattrs
  ovl: use ovl_path_getxattr() wrapper
  ovl: use ovl_lookup_upper() wrapper
  ovl: use ovl_do_notify_change() wrapper
  ovl: pass layer mnt to ovl_open_realfile()
  ovl: pass ofs to setattr operations
  ovl: handle idmappings in creation operations
  ovl: add ovl_upper_mnt_userns() wrapper
  ovl: pass ofs to creation operations
  ovl: use wrappers to all vfs_*xattr() calls
  exportfs: support idmapped mounts
  fs: add two trivial lookup helpers

Pull MIPS updates from Thomas Bogendoerfer:
 "Cleanups and fixes"

* tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits)
  MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC
  MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA
  MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem()
  MIPS: Kconfig: Fix indentation and add endif comment
  MIPS: bmips: Fix compiler warning observed on W=1 build
  MIPS: Rewrite `csum_tcpudp_nofold' in plain C
  mips: setup: use strscpy to replace strlcpy
  MIPS: Octeon: add SNIC10E board
  MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
  MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
  MIPS: Ingenic: Add PWM nodes for X1830.
  MIPS: Octeon: fix typo in comment
  MIPS: loongson32: Kconfig: Remove extra space
  MIPS: Sibyte: remove unnecessary return variable
  MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation
  selftests/ftrace: Save kprobe_events to test log
  MIPS: tools: no need to initialise statics to 0
  MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
  MIPS: VR41xx: Drop redundant spinlock initialization
  MIPS: smp: optimization for flush_tlb_mm when exiting
  ...

Pull m68knommu updates from Greg Ungerer:
 "A collection of changes to add elf-fdpic loader support for m68k.

  Also a collection of various fixes. They include typo corrections,
  undefined symbol compilation fixes, removal of the ISA_DMA_API support
  and removal of unused code.

  Summary:

   - correctly set up ZERO_PAGE pointer

   - drop ISA_DMA_API support

   - fix comment typos

   - fixes for undefined symbols

   - remove unused code and variables

   - elf-fdpic loader support for m68k"

* tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: fix 68000 CPU link with no platform selected
  m68k: removed unused "mach_get_ss"
  m68knommu: fix undefined reference to `mach_get_rtc_pll'
  m68knommu: fix undefined reference to `_init_sp'
  m68knommu: allow elf_fdpic loader to be selected
  m68knommu: add definitions to support elf_fdpic program loader
  m68knommu: implement minimal regset support
  m68knommu: use asm-generic/mmu.h for nommu setups
  m68k: fix typos in comments
  m68k: coldfire: drop ISA_DMA_API support
  m68knommu: set ZERO_PAGE() to the allocated zeroed page

Merge ACPI battery and backlight driver update and miscellaneous
cleanup for 5.19-rc1:

 - Make the ACPI battery driver show the "not-charging" status by
   default unless "charging" or "full" is directly indicated (Werner
   Sembach).

 - Improve the PM notifier in the ACPI backlight driver (Zhang Rui).

 - Clean up some white space in the ACPI code (Ian Cowan).

* acpi-battery:
  ACPI: battery: Make "not-charging" the default on no charging or full info

* acpi-video:
  ACPI: video: improve PM notifer callback

* acpi-misc:
  ACPI: clean up white space in a few places for consistency

Merge general ACPI cleanups and processor support updates for 5.19-rc1:

 - Rearrange find_child_checks() to simplify code (Rafael Wysocki).

 - Use memremap() to map the UCSI mailbox that is always in main memory
   and drop acpi_release_memory() that has no more users (Heikki
   Krogerus, Dan Carpenter).

 - Make max_cstate/nocst/bm_check_disable processor module parameters
   visible in sysfs (Yajun Deng).

 - Fix typo in the CPPC driver (Julia Lawall).

* acpi-glue:
  ACPI: glue: Rearrange find_child_checks()

* acpi-osl:
  usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe
  ACPI: OSL: Remove the helper for deactivating memory region
  usb: typec: ucsi: acpi: Map the mailbox with memremap()

* acpi-processor:
  ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs

* acpi-cppc:
  ACPI: CPPC: fix typo in comment

The devm_memremap() function never returns NULL.  It returns error
pointers.

Fixes: cdc3d2ab ("usb: typec: ucsi: acpi: Map the mailbox with memremap()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Those old syscalls aren't exported via our syscall table, so just drop
them.
Signed-off-by: Helge Deller <deller@gmx.de>

Merge system power off handling rework from Dmitry Osipenko for
5.19-rc1.

This introduces a mechanism allowing power sequences to be used for
powering off the system and makes related changes in platform-specific
code for multiple platforms.

* pm-sysoff: (29 commits)
  kernel/reboot: Change registration order of legacy power-off handler
  m68k: virt: Switch to new sys-off handler API
  kernel/reboot: Add devm_register_restart_handler()
  kernel/reboot: Add devm_register_power_off_handler()
  soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
  reboot: Remove pm_power_off_prepare()
  regulator: pfuze100: Use devm_register_sys_off_handler()
  ACPI: power: Switch to sys-off handler API
  memory: emif: Use kernel_can_power_off()
  mips: Use do_kernel_power_off()
  ia64: Use do_kernel_power_off()
  x86: Use do_kernel_power_off()
  sh: Use do_kernel_power_off()
  m68k: Switch to new sys-off handler API
  powerpc: Use do_kernel_power_off()
  xen/x86: Use do_kernel_power_off()
  parisc: Use do_kernel_power_off()
  arm64: Use do_kernel_power_off()
  riscv: Use do_kernel_power_off()
  csky: Use do_kernel_power_off()
  ...

Merge PM documentation update for 5.19-rc1.

* pm-docs:
  Documentation: admin-guide: PM: Add Out of Band mode