Pull input fixes from Dmitry Torokhov:

 - mark "guest" RMI device as pass-through port to avoid "phantom" ALPS
   toouchpad on newer Lenovo Carbons

 - add two more laptops to the Elantech's lists of devices using CRC
   mode

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - register F03 port as pass-through serio
  Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled

Pull MD bugfix from Shaohua Li:
 "One bug fix from Neil Brown for MD. The bug was introduced in this
  cycle"

* tag 'md/4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md: initialise ->writes_pending in personality modules.

Pull block fixes from Jens Axboe:
 "A set of fixes in the area of block IO, that should go into the next
  -rc release. This contains:

   - An OOPS fix from Dmitry, fixing a regression with the bio integrity
     code in this series.

   - Fix truncation of elevator io context cache name, from Eric
     Biggers.

   - NVMe pull from Christoph includes FC fixes from James, APST
     fixes/tweaks from Kai-Heng, removal fix from Rakesh, and an RDMA
     fix from Sagi.

   - Two tweaks for the block throttling code. One from Joseph Qi,
     fixing an oops from the timer code, and one from Shaohua, improving
     the behavior on rotatonal storage.

   - Two blk-mq fixes from Ming, fixing corner cases with the direct
     issue code.

   - Locking fix for bfq cgroups from Paolo"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block, bfq: access and cache blkg data only when safe
  Fix loop device flush before configure v3
  blk-throttle: set default latency baseline for harddisk
  blk-throttle: fix NULL pointer dereference in throtl_schedule_pending_timer
  nvme: relax APST default max latency to 100ms
  nvme: only consider exit latency when choosing useful non-op power states
  nvme-fc: fix missing put reference on controller create failure
  nvme-fc: on lldd/transport io error, terminate association
  nvme-rdma: fast fail incoming requests while we reconnect
  nvme-pci: fix multiple ctrl removal scheduling
  nvme: fix hang in remove path
  elevator: fix truncation of icq_cache_name
  blk-mq: fix direct issue
  blk-mq: pass correct hctx to blk_mq_try_issue_directly
  bio-integrity: Do not allocate integrity context for bio w/o data

Pull sound fixes from Takashi Iwai:
 "This update contains a slightly hight amount of changes due to the
  pending ASoC fixes:

   - ALSA timer core got a couple of fixes for races between read and
     ioctl, leading to potential read of uninitialized kmalloced memory

   - ASoC core fixed the de-registration pattern for use-after-free bug

   - The rewrite of probe code in ASoC Intel Skylake for i915 component

   - ASoC R-snd got a series of fixes for SSI

   - ASoC simple-card, atmel, da7213, and rt286 trivial fixes

   - HD-audio ALC269 quirk and rearrangement of quirk table"

* tag 'sound-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
  ALSA: timer: Fix race between read and ioctl
  ALSA: hda/realtek - Reorder ALC269 ASUS quirk entries
  ALSA: hda/realtek: Fix mic and headset jack sense on Asus X705UD
  ASoC: rsnd: fixup parent_clk_name of AUDIO_CLKOUTx
  ASoC: Intel: Skylake: Fix to parse consecutive string tkns in manifest
  ASoC: Intel: Skylake: Fix IPC rx_list corruption
  ASoC: rsnd: SSI PIO adjust to 24bit mode
  MAINTAINERS: Update email address for patches to Wolfson parts
  ASoC: Fix use-after-free at card unregistration
  ASoC: simple-card: fix mic jack initialization
  ASoC: rsnd: don't call free_irq() on Parent SSI
  ASoC: atmel-classd: sync regcache when resuming
  ASoC: rsnd: don't use PDTA bit for 24bit on SSI
  ASoC: da7213: Fix incorrect usage of bitwise '&' operator for SRM check
  rt286: add Thinkpad Helix 2 to force_combo_jack_table
  ASoC: Intel: Skylake: Move i915 registration to worker thread

Pull drm fixes from Dave Airlie:
 "Intel, nouveau, rockchip, vmwgfx, imx, meson, mediatek and core fixes.

  Bit more spread out fixes this time, fixes for 7 drivers + a couple of
  core fixes.

  i915 and vmwgfx are the main ones. The vmwgfx ones fix a bunch of
  regressions in their atomic rework, and a few fixes destined for
  stable. i915 has some 4.12 regressions and older things that need to
  be fixed in stable as well.

  nouveau also has some runtime pm fixes and a timer list handling fix,
  otherwise a couple of core and small driver regression fixes"

* tag 'drm-fixes-for-v4.12-rc5' of git://people.freedesktop.org/~airlied/linux: (37 commits)
  drm/i915: fix warning for unused variable
  drm/meson: Fix driver bind when only CVBS is available
  drm/i915: Fix 90/270 rotated coordinates for FBC
  drm/i915: Restore has_fbc=1 for ILK-M
  drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
  drm/i915: Fix logical inversion for gen4 quirking
  drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
  drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
  drm/i915: Prevent the system suspend complete optimization
  drm/i915/psr: disable psr2 for resolution greater than 32X20
  drm/i915: Hold a wakeref for probing the ring registers
  drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
  drm/i915: Disable decoupled MMIO
  drm/i915/guc: Remove stale comment for q_fail
  drm/vmwgfx: Bump driver minor and date
  drm/vmwgfx: Remove unused legacy cursor functions
  drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"
  drm/vmwgfx: Fix large topology crash
  drm/vmwgfx: Make sure to update STDU when FB is updated
  drm/vmwgfx: Make sure backup_handle is always valid
  ...

Pull xen fix from Juergen Gross:
 "A fix for Xen on ARM when dealing with 64kB page size of a guest"

* tag 'for-linus-4.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/privcmd: Support correctly 64KB page granularity when mapping memory

The 5th generation Thinkpad X1 Carbons use Synaptics touchpads accessible
over SMBus/RMI, combined with ALPS or Elantech trackpoint devices instead
of classic IBM/Lenovo trackpoints. Unfortunately there is no way for ALPS
driver to detect whether it is dealing with touchpad + trackpoint
combination or just a trackpoint, so we end up with a "phantom" dualpoint
ALPS device in addition to real touchpad and trackpoint.

Given that we do not have any special advanced handling for ALPS or
Elantech trackpoints (unlike IBM trackpoints that have separate driver and
a host of options) we are better off keeping the trackpoints in PS/2
emulation mode. We achieve that by setting serio type to SERIO_PS_PSTHRU,
which will limit number of protocols psmouse driver will try. In addition
to getting rid of the "phantom" touchpads, this will also speed up probing
of F03 pass-through port.
Reported-by: Damjan Georgievski <gdamjan@gmail.com>
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull powerpc fixes from Michael Ellerman:
 "Mostly fairly minor, of note are:

   - Fix percpu allocations to be NUMA aware

   - Limit 4k page size config to 64TB virtual address space

   - Avoid needlessly restoring FP and vector registers

  Thanks to Aneesh Kumar K.V, Breno Leitao, Christophe Leroy, Frederic
  Barrat, Madhavan Srinivasan, Michael Bringmann, Nicholas Piggin,
  Vaibhav Jain"

* tag 'powerpc-4.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/book3s64: Move PPC_DT_CPU_FTRs and enable it by default
  powerpc/mm/4k: Limit 4k page size config to 64TB virtual address space
  cxl: Fix error path on bad ioctl
  powerpc/perf: Fix Power9 test_adder fields
  powerpc/numa: Fix percpu allocations to be NUMA aware
  cxl: Avoid double free_irq() for psl,slice interrupts
  powerpc/kernel: Initialize load_tm on task creation
  powerpc/kernel: Fix FP and vector register restoration
  powerpc/64: Reclaim CPU_FTR_SUBCORE
  powerpc/hotplug-mem: Fix missing endian conversion of aa_index
  powerpc/sysdev/simple_gpio: Fix oops in gpio save_regs function
  powerpc/spufs: Fix coredump of SPU contexts
  powerpc/64s: Add dt_cpu_ftrs boot time setup option

Pull ARM SoC fixes from Olof Johansson:
 "Been sitting on these for a couple of weeks waiting on some larger
  batches to come in but it's been pretty quiet.

  Just your garden variety fixes here:

   - A few maintainers updates (ep93xx, Exynos, TI, Marvell)
   - Some PM fixes for Atmel/at91 and Marvell
   - A few DT fixes for Marvell, Versatile, TI Keystone, bcm283x
   - A reset driver patch to set module license for symbol access"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: EP93XX: Update maintainership
  MAINTAINERS: remove kernel@stlinux.com obsolete mailing list
  ARM: dts: versatile: use #include "..." to include local DT
  MAINTAINERS: add device-tree files to TI DaVinci entry
  ARM: at91: select CONFIG_ARM_CPU_SUSPEND
  ARM: dts: keystone-k2l: fix broken Ethernet due to disabled OSR
  arm64: defconfig: enable some core options for 64bit Rockchip socs
  arm64: marvell: dts: fix interrupts in 7k/8k crypto nodes
  reset: hi6220: Set module license so that it can be loaded
  MAINTAINERS: add irqchip related drivers to Marvell EBU maintainers
  MAINTAINERS: sort F entries for Marvell EBU maintainers
  ARM: davinci: PM: Do not free useful resources in normal path in 'davinci_pm_init'
  ARM: davinci: PM: Free resources in error handling path in 'davinci_pm_init'
  ARM: dts: bcm283x: Reserve first page for firmware
  memory: atmel-ebi: mark PM ops as __maybe_unused
  MAINTAINERS: Remove Javier Martinez Canillas as reviewer for Exynos

A bunch of fixes for vmwgfx 4.12 regressions and older stuff. In the latter
case either trivial, cc'd stable or requiring backports for stable.

* 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Bump driver minor and date
  drm/vmwgfx: Remove unused legacy cursor functions
  drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"
  drm/vmwgfx: Fix large topology crash
  drm/vmwgfx: Make sure to update STDU when FB is updated
  drm/vmwgfx: Make sure backup_handle is always valid
  drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()
  drm/vmwgfx: Don't create proxy surface for cursor
  drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()

Merge tag 'drm-intel-fixes-2017-06-08' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes

drm/i915 fixes for v4.12-rc5

* tag 'drm-intel-fixes-2017-06-08' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: fix warning for unused variable
  drm/i915: Fix 90/270 rotated coordinates for FBC
  drm/i915: Restore has_fbc=1 for ILK-M
  drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
  drm/i915: Fix logical inversion for gen4 quirking
  drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
  drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
  drm/i915: Prevent the system suspend complete optimization
  drm/i915/psr: disable psr2 for resolution greater than 32X20
  drm/i915: Hold a wakeref for probing the ring registers
  drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
  drm/i915: Disable decoupled MMIO
  drm/i915/guc: Remove stale comment for q_fail
  drm/i915: Serialize GTT/Aperture accesses on BXT

Driver Changes:
- kirin: Use correct dt port for the bridge (John)
- meson: Fix regression caused by adding HDMI support to allow board
	 configurations without HDMI (Neil)

Cc: John Stultz <john.stultz@linaro.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>

* tag 'drm-misc-fixes-2017-06-07' of git://anongit.freedesktop.org/git/drm-misc:
  drm/meson: Fix driver bind when only CVBS is available
  drm: kirin: Fix drm_of_find_panel_or_bridge conversion

Merge branch 'mediatek-drm-fixes-4.12-rc1' of https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes

mediatek fixes

* 'mediatek-drm-fixes-4.12-rc1' of https://github.com/ckhu-mediatek/linux.git-tags:
  drm/mediatek: fix mtk_hdmi_setup_vendor_specific_infoframe mistake
  drm/mediatek: fix a timeout loop

imx-drm: PRE clock gating, panelless LDB, and VDIC CSI selection fixes

- Keep the external clock input to the PRE ungated and only use the internal
  soft reset to keep the module in low power state, to avoid sporadic startup
  failures.
- Ignore -ENODEV return values from drm_of_find_panel_or_bridge in the LDB
  driver to fix probing for devices that still do not specify a panel in the
  device tree.
- Fix the CSI input selection to the VDIC. According to experiments, the real
  behaviour differs a bit from the documentation.

* tag 'imx-drm-fixes-2017-06-08' of git://git.pengutronix.de/git/pza/linux:
  gpu: ipu-v3: Fix CSI selection for VDIC
  drm/imx: imx-ldb: Accept drm_of_find_panel_or_bridge failure
  gpu: ipu-v3: pre: only use internal clock gating

Pull power management fixes from Rafael Wysocki:
 "These revert one problematic commit related to system sleep and fix
  one recent intel_pstate regression.

  Specifics:

   - Revert a recent commit that attempted to avoid spurious wakeups
     from suspend-to-idle via ACPI SCI, but introduced regressions on
     some systems (Rafael Wysocki).

     We will get back to the problem it tried to address in the next
     cycle.

   - Fix a possible division by 0 during intel_pstate initialization
     due to a missing check (Rafael Wysocki)"

* tag 'pm-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"
  cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min()

Pull module maintainer address change from Jessica Yu:
 "A single patch that advertises my email address change"

* tag 'modules-for-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  MAINTAINERS: update email address for Jessica Yu

* intel_pstate:
  cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min()

* pm-sleep:
  Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"

Pull printk fix from Petr Mladek:
 "This reverts a fix added into 4.12-rc1. It caused the kernel log to be
  printed on another console when two consoles of the same type were
  defined, e.g. console=ttyS0 console=ttyS1.

  This configuration was never supported by kernel itself, but it
  started to make sense with systemd. In other words, the commit broke
  userspace"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  Revert "printk: fix double printing with earlycon"

Pull crypto fixes from Herbert Xu:
 "This fixes a couple of places in the crypto code that were doing
  interruptible sleeps dangerously. They have been converted to use
  non-interruptible sleeps.

  This also fixes a bug in asymmetric_keys where it would trigger a
  use-after-free if a request returned EBUSY due to a full device queue"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: gcm - wait for crypto op not signal safe
  crypto: drbg - wait for crypto op not signal safe
  crypto: asymmetric_keys - handle EBUSY due to backlog correctly

In blk-cgroup, operations on blkg objects are protected with the
request_queue lock. This is no more the lock that protects
I/O-scheduler operations in blk-mq. In fact, the latter are now
protected with a finer-grained per-scheduler-instance lock. As a
consequence, although blkg lookups are also rcu-protected, blk-mq I/O
schedulers may see inconsistent data when they access blkg and
blkg-related objects. BFQ does access these objects, and does incur
this problem, in the following case.

The blkg_lookup performed in bfq_get_queue, being protected (only)
through rcu, may happen to return the address of a copy of the
original blkg. If this is the case, then the blkg_get performed in
bfq_get_queue, to pin down the blkg, is useless: it does not prevent
blk-cgroup code from destroying both the original blkg and all objects
directly or indirectly referred by the copy of the blkg. BFQ accesses
these objects, which typically causes a crash for NULL-pointer
dereference of memory-protection violation.

Some additional protection mechanism should be added to blk-cgroup to
address this issue. In the meantime, this commit provides a quick
temporary fix for BFQ: cache (when safe) blkg data that might
disappear right after a blkg_lookup.

In particular, this commit exploits the following facts to achieve its
goal without introducing further locks.  Destroy operations on a blkg
invoke, as a first step, hooks of the scheduler associated with the
blkg. And these hooks are executed with bfqd->lock held for BFQ. As a
consequence, for any blkg associated with the request queue an
instance of BFQ is attached to, we are guaranteed that such a blkg is
not destroyed, and that all the pointers it contains are consistent,
while that instance is holding its bfqd->lock. A blkg_lookup performed
with bfqd->lock held then returns a fully consistent blkg, which
remains consistent until this lock is held. In more detail, this holds
even if the returned blkg is a copy of the original one.

Finally, also the object describing a group inside BFQ needs to be
protected from destruction on the blkg_free of the original blkg
(which invokes bfq_pd_free). This commit adds private refcounting for
this object, to let it disappear only after no bfq_queue refers to it
any longer.

This commit also removes or updates some stale comments on locking
issues related to blk-cgroup operations.
Reported-by: Tomas Konir <tomas.konir@gmail.com>
Reported-by: Lee Tibbert <lee.tibbert@gmail.com>
Reported-by: Marco Piazza <mpiazza@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Tomas Konir <tomas.konir@gmail.com>
Tested-by: Lee Tibbert <lee.tibbert@gmail.com>
Tested-by: Marco Piazza <mpiazza@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Christoph writes:

"A few NVMe fixes for 4.12-rc, PCIe reset fixes and APST fixes, a
 RDMA reconnect fix, two FC fixes and a general controller removal fix."

drivers/gpu/drm/i915/intel_engine_cs.c: In function ‘intel_engine_is_idle’:
drivers/gpu/drm/i915/intel_engine_cs.c:1103:27: error: unused variable ‘dev_priv’ [-Werror=unused-variable]
  struct drm_i915_private *dev_priv = engine->i915;
                           ^~~~~~~~
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

While installing SLES-12 (based on v4.4), I found that the installer
will stall for 60+ seconds during LVM disk scan.  The root cause was
determined to be the removal of a bound device check in loop_flush()
by commit b5dd2f60 ("block: loop: improve performance via blk-mq").

Restoring this check, examining ->lo_state as set by loop_set_fd()
eliminates the bad behavior.

Test method:
modprobe loop max_loop=64
dd if=/dev/zero of=disk bs=512 count=200K
for((i=0;i<4;i++))do losetup -f disk; done
mkfs.ext4 -F /dev/loop0
for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done
for f in `ls /dev/loop[0-9]*|sort`; do \
	echo $f; dd if=$f of=/dev/null  bs=512 count=1; \
	done

Test output:  stock          patched
/dev/loop0    18.1217e-05    8.3842e-05
/dev/loop1     6.1114e-05    0.000147979
/dev/loop10    0.414701      0.000116564
/dev/loop11    0.7474        6.7942e-05
/dev/loop12    0.747986      8.9082e-05
/dev/loop13    0.746532      7.4799e-05
/dev/loop14    0.480041      9.3926e-05
/dev/loop15    1.26453       7.2522e-05

Note that from loop10 onward, the device is not mounted, yet the
stock kernel consumes several orders of magnitude more wall time
than it does for a mounted device.
(Thanks for Mike Galbraith <efault@gmx.de>, give a changelog review.)
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: James Wang <jnwang@suse.com>
Fixes: b5dd2f60 ("block: loop: improve performance via blk-mq")
Signed-off-by: Jens Axboe <axboe@fb.com>

The PPC_DT_CPU_FTRs is a bit misplaced in menuconfig, it shows up with
other general kernel options. It's really more at home in the "Platform
Support" section, so move it there.

Also enable it by default, for Book3s 64. It does mostly nothing unless
the device tree properties are found, and we will want it enabled
eventually in distro kernels, so turn it on to start getting more
testing.

Fixes: 5a61ef74 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Supporting 512TB requires us to do a order 3 allocation for level 1 page
table (pgd). This results in page allocation failures with certain workloads.
For now limit 4k linux page size config to 64TB.

Fixes: f6eedbba ("powerpc/mm/hash: Increase VA range to 128TB")
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Fix error path if we can't copy user structure on CXL_IOCTL_START_WORK
ioctl. We shouldn't unlock the context status mutex as it was not
locked (yet).

Fixes: 0712dc7e ("cxl: Fix issues when unmapping contexts")
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This reverts commit cf39bf58.

The commit regression to users that define both console=ttyS1
and console=ttyS0 on the command line, see
https://lkml.kernel.org/r/20170509082915.GA13236@bistromath.localdomain

The kernel log messages always appeared only on one serial port. It is
even documented in Documentation/admin-guide/serial-console.rst:

"Note that you can only define one console per device type (serial,
video)."

The above mentioned commit changed the order in which the command line
parameters are searched. As a result, the kernel log messages go to
the last mentioned ttyS* instead of the first one.

We long thought that using two console=ttyS* on the command line
did not make sense. But then we realized that console= parameters
were handled also by systemd, see
http://0pointer.de/blog/projects/serial-console.html

"By default systemd will instantiate one serial-getty@.service on
the main kernel console, if it is not a virtual terminal."

where

"[4] If multiple kernel consoles are used simultaneously, the main
console is the one listed first in /sys/class/tty/console/active,
which is the last one listed on the kernel command line."

This puts the original report into another light. The system is running
in qemu. The first serial port is used to store the messages into a file.
The second one is used to login to the system via a socket. It depends
on systemd and the historic kernel behavior.

By other words, systemd causes that it makes sense to define both
console=ttyS1 console=ttyS0 on the command line. The kernel fix
caused regression related to userspace (systemd) and need to be
reverted.

In addition, it went out that the fix helped only partially.
The messages still were duplicated when the boot console was
removed early by late_initcall(printk_late_init). Then the entire
log was replayed when the same console was registered as a normal one.

Link: 20170606160339.GC7604@pathway.suse.cz
Cc: Aleksey Makarov <aleksey.makarov@linaro.org>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Robin Murphy <robin.murphy@arm.com>,
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Nair, Jayachandran" <Jayachandran.Nair@cavium.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>

I will be traveling in the upcoming months and it'll be much easier for me
to access my kernel.org email rather than my work one. Change my email
address in the MAINTAINERS file from jeyu@redhat.com to jeyu@kernel.org.
Signed-off-by: Jessica Yu <jeyu@redhat.com>

The Lifebook E546 and E557 touchpad were also not functioning and
worked after running:

        echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled

Add them to the list of machines that need this workaround.
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Reviewed-by: Arjan Opmeer <arjan@opmeer.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

hard disk IO latency varies a lot depending on spindle move. The latency
range could be from several microseconds to several milliseconds. It's
pretty hard to get the baseline latency used by io.low.

We will use a different stragety here. The idea is only using IO with
spindle move to determine if cgroup IO is in good state. For HD, if io
latency is small (< 1ms), we ignore the IO. Such IO is likely from
sequential IO, and is helpless to help determine if a cgroup's IO is
impacted by other cgroups. With this, we only account IO with big
latency. Then we can choose a hardcoded baseline latency for HD (4ms,
which is typical IO latency with seek).  With all these settings, the
io.low latency works for both HD and SSD.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

While introducing HDMI support, component matching on connectors node
were bypassed since no driver would actually bind on the DT node.
But when only a CVBS connector is present, only a single node is found
in the graph, but ignored and a NULL match table is given to the
component code.

This code permits bypassing the components framework by binding directly
the DRM driver when no components needs to be loaded.

Fixes: a41e82e6 ("drm/meson: Add support for components")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1496067352-8733-1-git-send-email-narmstrong@baylibre.com

I have encountered a NULL pointer dereference in
throtl_schedule_pending_timer:
  [  413.735396] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
  [  413.735535] IP: [<ffffffff812ebbbf>] throtl_schedule_pending_timer+0x3f/0x210
  [  413.735643] PGD 22c8cf067 PUD 22cb34067 PMD 0
  [  413.735713] Oops: 0000 [#1] SMP
  ......

This is caused by the following case:
  blk_throtl_bio
    throtl_schedule_next_dispatch  <= sq is top level one without parent
      throtl_schedule_pending_timer
        sq_to_tg(sq)->td->throtl_slice  <= sq_to_tg(sq) returns NULL

Fix it by using sq_to_td instead of sq_to_tg(sq)->td, which will always
return a valid td.

Fixes: 297e3d85 ("blk-throttle: make throtl_slice tunable")
Signed-off-by: Joseph Qi <qijiang.qj@alibaba-inc.com>
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

The clipped src coordinates have already been rotated by 270 degrees for
when the plane rotation is 90/270 degrees, hence the FBC code should no
longer swap the width and height.

Cc: stable@vger.kernel.org
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fixes: b63a16f6 ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-4-ville.syrjala@linux.intel.comReviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 73714c05)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Restore the lost has_fbc flag for mobile ILK.

Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: a1323380 ("drm/i915: Introduce GEN5_FEATURES for device info")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170606133229.12439-1-ville.syrjala@linux.intel.comReviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c2d1a0ce)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

The scanline counter is bonkers on VLV/CHV DSI. The scanline counter
increment is not lined up with the start of vblank like it is on
every other platform and output type. This causes problems for
both the vblank timestamping and atomic update vblank evasion.

On my FFRD8 machine at least, the scanline counter increment
happens about 1/3 of a scanline ahead of the start of vblank (which
is where all register latching happens still). That means we can't
trust the scanline counter to tell us whether we're in vblank or not
while we're on that particular line. In order to keep vblank
timestamping in working condition when called from the vblank irq,
we'll leave scanline_offset at one, which means that the entire
line containing the start of vblank is considered to be inside
the vblank.

For the vblank evasion we'll need to consider that entire line
to be bad, since we can't tell whether the registers already
got latched or not. And we can't actually use the start of vblank
interrupt to get us past that line as the interrupt would fire
too soon, and then we'd up waiting for the next start of vblank
instead. One way around that would using the frame start
interrupt instead since that wouldn't fire until the next
scanline, but that would require some bigger changes in the
interrupt code. So for simplicity we'll just poll until we get
past the bad line.

v2: Adjust the comments a bit

Cc: stable@vger.kernel.org
Cc: Jonas Aaberg <cja@gmx.net>
Tested-by: Jonas Aaberg <cja@gmx.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.comTested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit ec1b4ee2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

The assertion that we want to make before disabling the pin of the pages
for the unknown swizzling quirk is that the quirk is indeed active, and
that the quirk is disabled before we do apply it to the pages.

Fixes: 2c3a3f44 ("drm/i915: Fix pages pin counting around swizzle quirk")
Fixes: 957870f9 ("drm/i915: Split out i915_gem_object_set_tiling()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170521124014.27678-1-chris@chris-wilson.co.uk
Reviewed-bhy: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 20bb3771)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Commit 7c3f86b6 ("drm/i915: Invalidate the guc ggtt TLB upon
insertion") added the restoration of the invalidation routine after the
GuC was disabled, but missed that the GuC was unconditionally disabled
when not used. This then overwrites the invalidate routine for the older
chipsets, causing havoc and breaking resume as the most obvious victim.

We place the guard inside i915_ggtt_disable_guc() to be backport
friendly (the bug was introduced into v4.11) but it would be preferred
to be in more control over when this was guard (i.e. do not try and
teardown the data structures before we have enabled them). That should
be true with the reorganisation of the guc loaders.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 7c3f86b6 ("drm/i915: Invalidate the guc ggtt TLB upon insertion")
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Link: http://patchwork.freedesktop.org/patch/msgid/20170531190514.3691-1-chris@chris-wilson.co.ukReviewed-by: Michel Thierry <michel.thierry@intel.com>
(cherry picked from commit cb60606d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

On some systems there can be a race condition in which no crtc state is
added to the first atomic commit. This results in all crtc's having a
null DDB allocation, causing a FIFO underrun on any update until the
first modeset.

Changes since v1:
- Do not take the connection_mutex, this is already done below.
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Inspired-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 98d39494 ("drm/i915/gen9: Compute DDB allocation at atomic
check time (v4)")
Cc: <stable@vger.kernel.org> # v4.8+
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.comReviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

(cherry picked from commit 367d73d2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Since

commit bac2a909
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date:   Wed Jan 21 02:17:42 2015 +0100

    PCI / PM: Avoid resuming PCI devices during system suspend

PCI devices will default to allowing the system suspend complete
optimization where devices are not woken up during system suspend if
they were already runtime suspended. This however breaks the i915/HDA
drivers for two reasons:

- The i915 driver has system suspend specific steps that it needs to
  run, that bring the device to a different state than its runtime
  suspended state.

- The HDA driver's suspend handler requires power that it will request
  from the i915 driver's power domain handler. This in turn requires the
  i915 driver to runtime resume itself, but this won't be possible if the
  suspend complete optimization is in effect: in this case the i915
  runtime PM is disabled and trying to get an RPM reference returns
  -EACCESS.

Solve this by requiring the PCI/PM core to resume the device during
system suspend which in effect disables the suspend complete optimization.

Regardless of the above commit the optimization stayed disabled for DRM
devices until

commit d14d2a84
Author: Lukas Wunner <lukas@wunner.de>
Date:   Wed Jun 8 12:49:29 2016 +0200

    drm: Remove dev_pm_ops from drm_class

so this patch is in practice a fix for this commit. Another reason for
the bug staying hidden for so long is that the optimization for a device
is disabled if it's disabled for any of its children devices. i915 may
have a backlight device as its child which doesn't support runtime PM
and so doesn't allow the optimization either.  So if this backlight
device got registered the bug stayed hidden.

Credits to Marta, Tomi and David who enabled pstore logging,
that caught one instance of this issue across a suspend/
resume-to-ram and Ville who rememberd that the optimization was enabled
for some devices at one point.

The first WARN triggered by the problem:

[ 6250.746445] WARNING: CPU: 2 PID: 17384 at drivers/gpu/drm/i915/intel_runtime_pm.c:2846 intel_runtime_pm_get+0x6b/0xd0 [i915]
[ 6250.746448] pm_runtime_get_sync() failed: -13
[ 6250.746451] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul
snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core ptp mei_me pps_core snd_pcm lpc_ich mei prime_
numbers i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915]
[ 6250.746512] CPU: 2 PID: 17384 Comm: kworker/u8:0 Tainted: G     U  W       4.11.0-rc5-CI-CI_DRM_334+ #1
[ 6250.746515] Hardware name:                  /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017
[ 6250.746521] Workqueue: events_unbound async_run_entry_fn
[ 6250.746525] Call Trace:
[ 6250.746530]  dump_stack+0x67/0x92
[ 6250.746536]  __warn+0xc6/0xe0
[ 6250.746542]  ? pci_restore_standard_config+0x40/0x40
[ 6250.746546]  warn_slowpath_fmt+0x46/0x50
[ 6250.746553]  ? __pm_runtime_resume+0x56/0x80
[ 6250.746584]  intel_runtime_pm_get+0x6b/0xd0 [i915]
[ 6250.746610]  intel_display_power_get+0x1b/0x40 [i915]
[ 6250.746646]  i915_audio_component_get_power+0x15/0x20 [i915]
[ 6250.746654]  snd_hdac_display_power+0xc8/0x110 [snd_hda_core]
[ 6250.746661]  azx_runtime_resume+0x218/0x280 [snd_hda_intel]
[ 6250.746667]  pci_pm_runtime_resume+0x76/0xa0
[ 6250.746672]  __rpm_callback+0xb4/0x1f0
[ 6250.746677]  ? pci_restore_standard_config+0x40/0x40
[ 6250.746682]  rpm_callback+0x1f/0x80
[ 6250.746686]  ? pci_restore_standard_config+0x40/0x40
[ 6250.746690]  rpm_resume+0x4ba/0x740
[ 6250.746698]  __pm_runtime_resume+0x49/0x80
[ 6250.746703]  pci_pm_suspend+0x57/0x140
[ 6250.746709]  dpm_run_callback+0x6f/0x330
[ 6250.746713]  ? pci_pm_freeze+0xe0/0xe0
[ 6250.746718]  __device_suspend+0xf9/0x370
[ 6250.746724]  ? dpm_watchdog_set+0x60/0x60
[ 6250.746730]  async_suspend+0x1a/0x90
[ 6250.746735]  async_run_entry_fn+0x34/0x160
[ 6250.746741]  process_one_work+0x1f2/0x6d0
[ 6250.746749]  worker_thread+0x49/0x4a0
[ 6250.746755]  kthread+0x107/0x140
[ 6250.746759]  ? process_one_work+0x6d0/0x6d0
[ 6250.746763]  ? kthread_create_on_node+0x40/0x40
[ 6250.746768]  ret_from_fork+0x2e/0x40
[ 6250.746778] ---[ end trace 102a62fd2160f5e6 ]---

v2:
- Use the new pci_dev->needs_resume flag, to avoid any overhead during
  the ->pm_prepare hook. (Rafael)

v3:
- Update commit message to reference the actual regressing commit.
  (Lukas)

v4:
- Rebase on v4 of patch 1/2.

Fixes: d14d2a84 ("drm: Remove dev_pm_ops from drm_class")
References: https://bugs.freedesktop.org/show_bug.cgi?id=100378
References: https://bugs.freedesktop.org/show_bug.cgi?id=100770
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: linux-pci@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.10.x: 4d071c32 - PCI/PM: Add needs_resume flag
Cc: <stable@vger.kernel.org> # v4.10.x
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1493726649-32094-2-git-send-email-imre.deak@intel.com
(cherry picked from commit adfdf85d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

psr1 is also disabled for panel resolution  greater than 32X20.
Added psr2 check to disable only for psr2 panels having resolution
greater than 32X20.

issue was introduced by
commit-id : "acf45d11"
commit message: "PSR2 is restricted to work with panel resolutions
upto 3200x2000, move the check to intel_psr_match_conditions and fully
block psr."

v2: (Rodrigo)
   Add previous commit details which introduced the issue

Fixes: acf45d11 ("drm/i915/psr: disable psr2 for resolution greater than 32X20")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Yaroslav Shabalin <yaroslav.shabalin@gmail.com>
Reported-by: Yaroslav Shabalin <yaroslav.shabalin@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/49935bdff896ee3140bed471012b9f9110a863a4.1495729964.git.vathsala.nagaraju@intel.com
(cherry picked from commit bef8c056)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>