- 23 Aug, 2021 22 commits
-
-
Filipe Manana authored
Currently all the callers of btrfs_find_all_roots() pass a value of false for its ignore_offset argument. This makes the argument pointless and we can remove it and make btrfs_find_all_roots() always pass false as the ignore_offset argument for btrfs_find_all_roots_safe(). So just do that. Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Filipe Manana authored
During a fast fsync, if we have already fsynced the file before and in the current transaction, we can make the inode item update more efficient and avoid acquiring a write lock on the leaf's parent. To update the inode item we are always using btrfs_insert_empty_item() to get a path pointing to the inode item, which calls btrfs_search_slot() with an "ins_len" argument of 'sizeof(struct btrfs_inode_item) + sizeof(struct btrfs_item)', and that always results in the search taking a write lock on the level 1 node that is the parent of the leaf that contains the inode item. This adds unnecessary lock contention on log trees when we have multiple fsyncs in parallel against inodes in the same subvolume, which has a very significant impact due to the fact that log trees are short lived and their height very rarely goes beyond level 2. Also, by using btrfs_insert_empty_item() when we need to update the inode item, we also end up splitting the leaf of the existing inode item when the leaf has an amount of free space smaller than the size of an inode item. Improve this by using btrfs_seach_slot(), with a 0 "ins_len" argument, when we know the inode item already exists in the log. This avoids these two inefficiencies. The following script, using fio, was used to perform the tests: $ cat fio-test.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-d single -m single" if [ $# -ne 4 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 cat <<EOF > /tmp/fio-job.ini [writers] rw=randwrite fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo echo "mount options: $MOUNT_OPTIONS" echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The tests were done on a physical machine, with 12 cores, 64G of RAM, using a NVMEe device and using a non-debug kernel config (the default one from Debian). The summary line from fio is provided below for each test run. With 8 jobs, file size 256M, fsync frequency of 4 and a block size of 4K: Before: WRITE: bw=28.3MiB/s (29.7MB/s), 28.3MiB/s-28.3MiB/s (29.7MB/s-29.7MB/s), io=2048MiB (2147MB), run=72297-72297msec After: WRITE: bw=28.7MiB/s (30.1MB/s), 28.7MiB/s-28.7MiB/s (30.1MB/s-30.1MB/s), io=2048MiB (2147MB), run=71411-71411msec +1.4% throughput, -1.2% runtime With 16 jobs, file size 256M, fsync frequency of 4 and a block size of 4K: Before: WRITE: bw=40.0MiB/s (42.0MB/s), 40.0MiB/s-40.0MiB/s (42.0MB/s-42.0MB/s), io=4096MiB (4295MB), run=99980-99980msec After: WRITE: bw=40.9MiB/s (42.9MB/s), 40.9MiB/s-40.9MiB/s (42.9MB/s-42.9MB/s), io=4096MiB (4295MB), run=97933-97933msec +2.2% throughput, -2.1% runtime The changes are small but it's possible to be better on faster hardware as in the test machine used disk utilization was pretty much 100% during the whole time the tests were running (observed with 'iostat -xz 1'). The tests also included the previous patch with the subject of: "btrfs: avoid unnecessary log mutex contention when syncing log". So they compared a branch without that patch and without this patch versus a branch with these two patches applied. Reviewed-by:Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Filipe Manana authored
One of the last steps of syncing the log is to remove all log contexts from the root's list of contexts, done at btrfs_remove_all_log_ctxs(). There we iterate over all the contexts in the list and delete each one from the list, and after that we call INIT_LIST_HEAD() on the list. That is unnecessary since at that point the list is empty. So just remove the INIT_LIST_HEAD() call. It's not needed, increases code size (bloat-o-meter reported a delta of -122 for btrfs_sync_log() after this change) and increases two critical sections delimited by log mutexes. Reviewed-by:
-
Filipe Manana authored
When syncing the log we acquire the root's log mutex just to update the root's last_log_commit. This is unnecessary because: 1) At this point there can only be one task updating this value, which is the task committing the current log transaction. Any task that enters btrfs_sync_log() has to wait for the previous log transaction to commit and wait for the current log transaction to commit if someone else already started it (in this case it never reaches to the point of updating last_log_commit, as that is done by the committing task); 2) All readers of the root's last_log_commit don't acquire the root's log mutex. This is to avoid blocking the readers, potentially for too long and because getting a stale value of last_log_commit does not cause any functional problem, in the worst case getting a stale value results in logging an inode unnecessarily. Plus it's actually very rare to get a stale value that results in unnecessarily logging the inode. So in order to avoid unnecessary contention on the root's log mutex, which is used for several different purposes, like starting/joining a log transaction and starting writeback of a log transaction, stop acquiring the log mutex for updating the root's last_log_commit. Reviewed-by:
-
Filipe Manana authored
When using the NO_HOLES feature and expanding the size of an inode, we update the inode's last_trans, last_sub_trans and last_log_commit fields at maybe_insert_hole() so that a fsync does know that the inode needs to be logged (by making sure that btrfs_inode_in_log() returns false). This happens for expanding truncate operations, buffered writes, direct IO writes and when cloning extents to an offset greater than the inode's i_size. However the way we do it is racy, because in between setting the inode's last_sub_trans and last_log_commit fields, the log transaction ID that was assigned to last_sub_trans might be committed before we read the root's last_log_commit and assign that value to last_log_commit. If that happens it would make a future call to btrfs_inode_in_log() return true. This is a race that should be extremely unlikely to be hit in practice, and it is the same that was described by commit bc0939fc ("btrfs: fix race between marking inode needs to be logged and log syncing"). The fix would simply be to set last_log_commit to the value we assigned to last_sub_trans minus 1, like it was done in that commit. However updating these two fields plus the last_trans field is pointless here because all the callers of btrfs_cont_expand() (which is the only caller of maybe_insert_hole()) always call btrfs_set_inode_last_trans() or btrfs_update_inode() after calling btrfs_cont_expand(). Calling either btrfs_set_inode_last_trans() or btrfs_update_inode() guarantees that the next fsync will log the inode, as it makes btrfs_inode_in_log() return false. So just remove the code that explicitly sets the inode's last_trans, last_sub_trans and last_log_commit fields. Reviewed-by:
-
Filipe Manana authored
In commit 351cbf6e ("btrfs: use nofs allocations for running delayed items") we wrapped all btree updates when running delayed items with memalloc_nofs_save() and memalloc_nofs_restore(), due to a lock inversion detected by lockdep involving reclaim and the mutex of delayed nodes. The problem is because the ref verify tool does some memory allocations with GFP_KERNEL, which can trigger reclaim and reclaim can trigger inode eviction, which requires locking the mutex of an inode's delayed node. On the other hand the ref verify tool is called when allocating metadata extents as part of operations that modify a btree, which is a problem when running delayed nodes, where we do btree updates while holding the mutex of a delayed node. This is what caused the lockdep warning. Instead of wrapping every btree update when running delayed nodes, change the ref verify tool to never do GFP_KERNEL allocations, because: 1) We get less repeated code, which at the moment does not even have a comment mentioning why we need to setup the NOFS context, which is a recommended good practice as mentioned at Documentation/core-api/gfp_mask-from-fs-io.rst 2) The ref verify tool is something meant only for debugging and not something that should be enabled on non-debug / non-development kernels; 3) We may have yet more places outside delayed-inode.c where we have similar problem: doing btree updates while holding some lock and then having the GFP_KERNEL memory allocations, from the ref verify tool, trigger reclaim and trying again to acquire the same lock through the reclaim path. Or we could get more such cases in the future, therefore this change prevents getting into similar cases when using the ref verify tool. Curiously most of the memory allocations done by the ref verify tool were already using GFP_NOFS, except a few ones for no apparent reason. Reviewed-by:
-
Filipe Manana authored
When we insert the delayed items of an inode, which corresponds to the directory index keys for a directory (key type BTRFS_DIR_INDEX_KEY), we do the following: 1) Pick the first delayed item from the rbtree and insert it into the fs/subvolume btree, using btrfs_insert_empty_item() for that; 2) Without releasing the path returned by btrfs_insert_empty_item(), keep collecting as many consecutive delayed items from the rbtree as possible, as long as each one's BTRFS_DIR_INDEX_KEY key is the immediate successor of the previously picked item and as long as they fit in the available space of the leaf the path points to; 3) Then insert all the collected items into the leaf; 4) Release the reserve metadata space for each collected item and release each item (implies deleting from the rbtree); 5) Unlock the path. While this is much better than inserting items one by one, it can be improved in a few aspects: 1) Instead of adding items based on the remaining free space of the leaf, collect as many items that can fit in a leaf and bulk insert them. This results in less and larger batches, reducing the total amount of time to insert the delayed items. For example when adding 100K files to a directory, we ended up creating 1658 batches with very variable sizes ranging from 1 item to 118 items, on a filesystem with a node/leaf size of 16K. After this change, we end up with 839 batches, with the vast majority of them having exactly 120 items; 2) We do the search for more items to batch, by iterating the rbtree, while holding a write lock on the leaf; 3) While still holding the leaf locked, we are releasing the reserved metadata for each item and then deleting each item, keeping a write lock on the leaf for longer than necessary. Releasing the delayed items one by one can take a significant amount of time, because deleting them from the rbtree can often be a bit slow when the deletion results in rebalancing the rbtree. So change this so that we try to create larger batches, with a total item size up to the maximum a leaf can support, and by unlocking the leaf immediately after inserting the items, releasing the reserved metadata space of each item and releasing each item without holding the write lock on the leaf. The following script that runs fs_mark was used to test this change: $ cat test.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-m single -d single" FILES=1000000 THREADS=16 FILE_SIZE=0 echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT OPTS="-S 0 -L 5 -n $FILES -s $FILE_SIZE -t 16" for ((i = 1; i <= $THREADS; i++)); do OPTS="$OPTS -d $MNT/d$i" done fs_mark $OPTS umount $MNT It was run on machine with 12 cores, 64G of ram, using a NVMe device and using a non-debug kernel config (Debian's default config). Results before this change: FSUse% Count Size Files/sec App Overhead 1 16000000 0 76182.1 72223046 3 32000000 0 62746.9 80776528 5 48000000 0 77029.0 93022381 6 64000000 0 73691.6 95251075 8 80000000 0 66288.0 85089634 Results after this change: FSUse% Count Size Files/sec App Overhead 1 16000000 0 79049.5 (+3.7%) 69700824 3 32000000 0 65248.9 (+3.9%) 80583693 5 48000000 0 77991.4 (+1.2%) 90040908 6 64000000 0 75096.8 (+1.9%) 89862241 8 80000000 0 66926.8 (+1.0%) 84429169 Reviewed-by: -
Qu Wenruo authored
When extent tree gets corrupted, normally it's not extent tree root, but one toasted tree leaf/node. In that case, rescue=ibadroots mount option won't help as it can only handle the extent tree root corruption. This patch will enhance the behavior by: - Allow fill_dummy_bgs() to ignore -EEXIST error This means we may have some block group items read from disk, but then hit some error halfway. - Fallback to fill_dummy_bgs() if any error gets hit in btrfs_read_block_groups() Of course, this still needs rescue=ibadroots mount option. With that, rescue=ibadroots can handle extent tree corruption more gracefully and allow a better recover chance. Reported-by:
Zhenyu Wu <wuzy001@gmail.com> Link: https://www.spinics.net/lists/linux-btrfs/msg114424.htmlReviewed-by:
Su Yue <l@damenly.su> Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Marcos Paulo de Souza authored
Using a transaction in btrfs_search_slot is only useful when we are searching to add or modify the tree. When the function is used for searching, insert length and mod arguments are 0, there is no need to use a transaction. No functional changes, changing for consistency. Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Marcos Paulo de Souza <mpdesouza@suse.com> Signed-off-by:
-
Filipe Manana authored
At reada_for_search(), when attempting to readahead a node or leaf's siblings, we skip the readahead of the siblings if the node/leaf is already in memory. That is probably fine for the READA_FORWARD and READA_BACK readahead types, as they are used on contexts where we end up reading some consecutive leaves, but usually not the whole btree. However for a READA_FORWARD_ALWAYS mode, currently only used for full send operations, it does not make sense to skip the readahead if the target node or leaf is already loaded in memory, since we know the caller is visiting every node and leaf of the btree in ascending order. So change the behaviour to not skip the readahead when the target node is already in memory and the readahead mode is READA_FORWARD_ALWAYS. The following test script was used to measure the improvement on a box using an average, consumer grade, spinning disk, with 32GiB of RAM and using a non-debug kernel config (Debian's default config). $ cat test.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null mount $MOUNT_OPTIONS $DEV $MNT # Create files with inline data to make it easier and faster to create # large btrees. add_files() { local total=$1 local start_offset=$2 local number_jobs=$3 local total_per_job=$(($total / $number_jobs)) echo "Creating $total new files using $number_jobs jobs" for ((n = 0; n < $number_jobs; n++)); do ( local start_num=$(($start_offset + $n * $total_per_job)) for ((i = 1; i <= $total_per_job; i++)); do local file_num=$((start_num + $i)) local file_path="$MNT/file_${file_num}" xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null if [ $? -ne 0 ]; then echo "Failed creating file $file_path" break fi done ) & worker_pids[$n]=$! done wait ${worker_pids[@]} sync echo echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)" } file_count=2000000 add_files $file_count 0 4 echo echo "Creating snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap1 umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing full send..." start=$(date +%s) btrfs send $MNT/snap1 > /dev/null end=$(date +%s) echo echo "Full send took $((end - start)) seconds" umount $MNT The duration of the full send operations, in seconds, were the following: Before this change: 85 seconds After this change: 76 seconds (-11.2%) Reviewed-by: -
David Sterba authored
The pages in block_ctx have never been allocated from highmem (in btrfsic_read_block) so the mapping is pointless and can be removed. Signed-off-by: -
David Sterba authored
The pages in compressed_pages are not from highmem anymore so we can drop the mapping for checksum calculation and inline extent. Signed-off-by: -
David Sterba authored
As we don't use highmem pages anymore, drop the kmap/kunmap. The kmap is simply page_address and kunmap is a no-op. Signed-off-by: -
David Sterba authored
As we don't use highmem pages anymore, drop the kmap/kunmap. The kmap is simply page_address and kunmap is a no-op. Signed-off-by: -
David Sterba authored
As we don't use highmem pages anymore, drop the kmap/kunmap. The kmap is simply page_address and kunmap is a no-op. Signed-off-by: -
David Sterba authored
The highmem flag is used for allocating pages for compression and for raid56 pages. The high memory makes sense on 32bit systems but is not without problems. On 64bit system's it's just another layer of wrappers. The time the pages are allocated for compression or raid56 is relatively short (about a transaction commit), so the pages are not blocked indefinitely. As the number of pages depends on the amount of data being written/read, there's a theoretical problem. A fast device on a 32bit system could use most of the low memory pool, while with the highmem allocation that would not happen. This was possibly the original idea long time ago, but nowadays we optimize for 64bit systems. This patch removes all usage of the __GFP_HIGHMEM flag for page allocation, the kmap/kunmap are still in place and will be removed in followup patches. Remaining is masking out the bit in alloc_extent_state and __lookup_free_space_inode, that can safely stay. Signed-off-by: -
Anand Jain authored
Drop variable 'devices' (used only once) and add new variable for the fs_devices, so it is used at two locations within btrfs_trim_fs() function and also helps to access fs_devices->devices. Signed-off-by:
-
Marcos Paulo de Souza authored
Both callers use btrfs_header_nritems to feed the max argument. Remove the argument and let generic_bin_search call it itself. Reviewed-by:
-
Nikolay Borisov authored
One of the final things that must be done to add a new chunk is inserting its device extent items in the device tree. They describe the portion of allocated device physical space during phase 1 of chunk allocation. This is currently done in btrfs_finish_chunk_alloc whose name isn't very informative. What's more, this function is only used in block-group.c but is defined as public. There isn't anything special about it that would warrant it being defined in volumes.c. Just move btrfs_finish_chunk_alloc and alloc_chunk_dev_extent to block-group.c, make the former static and rename both functions to insert_dev_extents and insert_dev_extent respectively. Reviewed-by:
-
Anand Jain authored
The function prototypes below aren't necessary as the functions are first defined before called. Remove them. Signed-off-by:
-
David Sterba authored
On 64K pages the size of the extent_buffer::pages array is 1 and compilation with -Warray-bounds warns due to kaddr = page_address(eb->pages[idx + 1]); when reading byte range crossing page boundary. This does never actually overflow the array because on 64K because all the data fit in one page and bounds are checked by check_setget_bounds. To fix the reported overflows and warnings add a compile-time condition that will allow compiler to eliminate the dead code that reads from the idx + 1 page. Link: https://lore.kernel.org/lkml/20210623083901.1d49d19d@canb.auug.org.au/ CC: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Johannes Thumshirn authored
There used to be a patch in the original series for zoned support which limited the extent size to max_zone_append_size, but this patch has been dropped somewhere around v9. We've decided to go the opposite direction, instead of limiting extents in the first place we split them before submission to comply with the device's limits. Remove the related code, btrfs_fs_info::max_zone_append_size and btrfs_zoned_device_info::max_zone_append_size. This also removes the workaround for dm-crypt introduced in 1d68128c ("btrfs: zoned: fail mount if the device does not support zone append") because the fix has been merged as f34ee1dc ("dm crypt: Fix zoned block device support"). Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
- 22 Aug, 2021 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix random crashes on some 32-bit CPUs by adding isync() after locking/unlocking KUEP - Fix intermittent crashes when loading modules with strict module RWX - Fix a section mismatch introduce by a previous fix. Thanks to Christophe Leroy, Fabiano Rosas, Laurent Vivier, Murilo Opsfelder Araújo, Nathan Chancellor, and Stan Johnson. h# -----BEGIN PGP SIGNATURE----- * tag 'powerpc-5.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix set_memory_*() against concurrent accesses powerpc/32s: Fix random crashes by adding isync() after locking/unlocking KUEP powerpc/xive: Do not mark xive_request_ipi() as __init
-
- 21 Aug, 2021 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk driver fixes from Stephen Boyd: - Make the regulator state match the GDSC power domain state at boot on Qualcomm SoCs so that the regulator isn't turned off inadvertently. - Fix earlycon on i.MX6Q SoCs * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gdsc: Ensure regulator init state matches GDSC state clk: imx6q: fix uart earlycon unwork
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small driver fixes for 5.14-rc7. They consist of: - revert for an interconnect patch that was found to have problems - ipack tpci200 driver fixes for reported problems - slimbus messaging and ngd fixes for reported problems All are small and have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: ipack: tpci200: fix memory leak in the tpci200_register ipack: tpci200: fix many double free issues in tpci200_pci_probe slimbus: ngd: reset dma setup during runtime pm slimbus: ngd: set correct device for pm slimbus: messaging: check for valid transaction id slimbus: messaging: start transaction ids from 1 instead of zero Revert "interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fix from Greg KH: "Here is a single USB typec tcpm fix for a reported problem for 5.14-rc7. It showed up in 5.13 and resolves an issue that Hans found. It has been in linux-next this week with no reported problems" * tag 'usb-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tcpm: Fix VDMs sometimes not being forwarded to alt-mode drivers
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - fix the sifive-l2-cache device tree bindings for json-schema compatibility. This does not change the intended behavior of the binding. - avoid improperly freeing necessary resources during early boot. * tag 'riscv-for-linus-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix a number of free'd resources in init_resources() dt-bindings: sifive-l2-cache: Fix 'select' matching
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fix from Vasily Gorbik: - fix use after free of zpci_dev in pci code * tag 's390-5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: fix use after free of zpci_dev
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linuxLinus Torvalds authored
Pull mandatory file locking deprecation warning from Jeff Layton: "As discussed on the list, this patch just adds a new warning for folks who still have mandatory locking enabled and actually mount with '-o mand'. I'd like to get this in for v5.14 so we can push this out into stable kernels and hopefully reach folks who have mounts with -o mand. For now, I'm operating under the assumption that we'll fully remove this support in v5.15, but we can move that out if any legitimate users of this facility speak up between now and then" * tag 'locks-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: fs: warn about impending deprecation of mandatory locks
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Three fixes from Ming Lei that should go into 5.14: - Fix for a kernel panic when iterating over tags for some cases where a flush request is present, a regression in this cycle. - Request timeout fix - Fix flush request checking" * tag 'block-5.14-2021-08-20' of git://git.kernel.dk/linux-block: blk-mq: fix is_flush_rq blk-mq: fix kernel panic during iterating over flush request blk-mq: don't grab rq's refcount in blk_mq_check_expired() -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few small fixes that should go into this release: - Fix never re-assigning an initial error value for io_uring_enter() for SQPOLL, if asked to do nothing - Fix xa_alloc_cycle() return value checking, for cases where we have wrapped around - Fix for a ctx pin issue introduced in this cycle (Pavel)" * tag 'io_uring-5.14-2021-08-20' of git://git.kernel.dk/linux-block: io_uring: fix xa_alloc_cycle() error return value check io_uring: pin ctx on fallback execution io_uring: only assign io_uring_enter() SQPOLL error in actual error case -
Jeff Layton authored
We've had CONFIG_MANDATORY_FILE_LOCKING since 2015 and a lot of distros have disabled it. Warn the stragglers that still use "-o mand" that we'll be dropping support for that mount option. Cc: stable@vger.kernel.org Signed-off-by:Jeff Layton <jlayton@kernel.org>
-
- 20 Aug, 2021 7 commits
-
-
Jens Axboe authored
We currently check for ret != 0 to indicate error, but '1' is a valid return and just indicates that the allocation succeeded with a wrap. Correct the check to be for < 0, like it was before the xarray conversion. Cc: stable@vger.kernel.org Fixes: 61cf9370 ("io_uring: Convert personality_idr to XArray") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These fix two mistakes in new code. Specifics: - Prevent confusing messages from being printed if the PRMT table is not present or there are no PRM modules (Aubrey Li). - Fix the handling of suspend-to-idle entry and exit in the case when the Microsoft UUID is used with the Low-Power S0 Idle _DSM interface (Mario Limonciello)" * tag 'acpi-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: s2idle: Invert Microsoft UUID entry and exit ACPI: PRM: Deal with table not present or no module found -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix some issues in the ARM cpufreq drivers and in the operating performance points (OPP) framework. Specifics: - Fix useless WARN() in the OPP core and prevent a noisy warning from being printed by OPP _put functions (Dmitry Osipenko). - Fix error path when allocation failed in the arm_scmi cpufreq driver (Lukasz Luba). - Blacklist Qualcomm sc8180x and Qualcomm sm8150 in cpufreq-dt-platdev (Bjorn Andersson, Thara Gopinath). - Forbid cpufreq for 1.2 GHz variant in the armada-37xx cpufreq driver (Marek Behún)" * tag 'pm-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: opp: Drop empty-table checks from _put functions cpufreq: armada-37xx: forbid cpufreq for 1.2 GHz variant cpufreq: blocklist Qualcomm sm8150 in cpufreq-dt-platdev cpufreq: arm_scmi: Fix error path when allocation failed opp: remove WARN when no valid OPPs remain cpufreq: blacklist Qualcomm sc8180x in cpufreq-dt-platdev -
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "10 patches. Subsystems affected by this patch series: MAINTAINERS and mm (shmem, pagealloc, tracing, memcg, memory-failure, vmscan, kfence, and hugetlb)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: hugetlb: don't pass page cache pages to restore_reserve_on_error kfence: fix is_kfence_address() for addresses below KFENCE_POOL_SIZE mm: vmscan: fix missing psi annotation for node_reclaim() mm/hwpoison: retry with shake_page() for unhandlable pages mm: memcontrol: fix occasional OOMs due to proportional memory.low reclaim MAINTAINERS: update ClangBuiltLinux IRC chat mmflags.h: add missing __GFP_ZEROTAGS and __GFP_SKIP_KASAN_POISON names mm/page_alloc: don't corrupt pcppage_migratetype Revert "mm: swap: check if swap backing device is congested or not" Revert "mm/shmem: fix shmem_swapin() race with swapoff"
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Regularly scheduled fixes. The ttm one solves a problem of GPU drivers failing to load if debugfs is off in Kconfig, otherwise the i915 and mediatek, and amdgpu fixes all fairly normal. Nouveau has a couple of display fixes, but it has a fix for a longstanding race condition in it's memory manager code, and the fix mostly removes some code that wasn't working properly and has no userspace users. This fix makes the diffstat kinda larger but in a good (negative line-count) way. core: - fix drm_wait_vblank uapi copying bug ttm: - fix debugfs init when debugfs is off amdgpu: - vega10 SMU workload fix - DCN VM fix - DCN 3.01 watermark fix amdkfd: - SVM fix nouveau: - ampere display fixes - remove MM misfeature to fix a longstanding race condition i915: - tweaked display workaround for all PCHs - eDP MSO pipe sanity for ADL-P fix - remove unused symbol export mediatek: - AAL output size setting - Delete component in remove function" * tag 'drm-fixes-2021-08-20-3' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Use DCN30 watermark calc for DCN301 drm/i915/dp: remove superfluous EXPORT_SYMBOL() drm/i915/edp: fix eDP MSO pipe sanity checks for ADL-P drm/i915: Tweaked Wa_14010685332 for all PCHs drm/nouveau: rip out nvkm_client.super drm/nouveau: block a bunch of classes from userspace drm/nouveau/fifo/nv50-: rip out dma channels drm/nouveau/kms/nv50: workaround EFI GOP window channel format differences drm/nouveau/disp: power down unused DP links during init drm/nouveau: recognise GA107 drm: Copy drm_wait_vblank to user before returning drm/amd/display: Ensure DCN save after VM setup drm/amdkfd: fix random KFDSVMRangeTest.SetGetAttributesTest test failure drm/amd/pm: change the workload type for some cards Revert "drm/amd/pm: fix workload mismatch on vega10" drm: ttm: Don't bail from ttm_global_init if debugfs_create_dir fails drm/mediatek: Add component_del in OVL and COLOR remove function drm/mediatek: Add AAL output size configuration
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Add Rahul Tanwar as Intel LGM Gateway PCIe maintainer (Rahul Tanwar) - Add Jim Quinlan et al as Broadcom STB PCIe maintainers (Jim Quinlan) - Increase D3hot-to-D0 delay for AMD Renoir/Cezanne XHCI (Marcin Bachry) - Correct iomem_get_mapping() usage for legacy_mem sysfs (Krzysztof Wilczyński) * tag 'pci-v5.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/sysfs: Use correct variable for the legacy_mem sysfs object PCI: Increase D3 delay for AMD Renoir/Cezanne XHCI MAINTAINERS: Add Jim Quinlan et al as Broadcom STB PCIe maintainers MAINTAINERS: Add Rahul Tanwar as Intel LGM Gateway PCIe maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC host fixes from Ulf Hansson: - dw_mmc: Fix hang on data CRC error - mmci: Fix voltage switch procedure for the stm32 variant - sdhci-iproc: Fix some clock issues for BCM2711 - sdhci-msm: Fixup software timeout value * tag 'mmc-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711 mmc: sdhci-iproc: Cap min clock frequency on BCM2711 mmc: sdhci-msm: Update the software timeout value for sdhc mmc: mmci: stm32: Check when the voltage switch procedure should be done mmc: dw_mmc: Fix hang on data CRC error
-
