- 17 May, 2017 40 commits
-
-
Johan Hovold authored
[ Upstream commit d5823511 ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: c4018fa2 ("[media] dib0700: fix RC support on Hauppauge Nova-TD") Cc: stable <stable@vger.kernel.org> # 3.16 Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Marek Szyprowski authored
[ Upstream commit 768d64f4 ] Driver should provide its own struct device for all DMA-mapping calls instead of extracting device pointer from DMA engine channel. Although this is harmless from the driver operation perspective on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes following DMA API debug warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1241 check_sync+0x520/0x9f4 samsung-uart 12c20000.serial: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000006df0f580] [size=64 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00137-g07ca963 #51 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24) [<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0) [<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180) [<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50) [<c01395a4>] (warn_slowpath_fmt) from [<c0729058>] (check_sync+0x520/0x9f4) [<c0729058>] (check_sync) from [<c072967c>] (debug_dma_sync_single_for_device+0x88/0xc8) [<c072967c>] (debug_dma_sync_single_for_device) from [<c0803c10>] (s3c24xx_serial_start_tx_dma+0x100/0x2f8) [<c0803c10>] (s3c24xx_serial_start_tx_dma) from [<c0804338>] (s3c24xx_serial_tx_chars+0x198/0x33c) Reported-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Fixes: 62c37eed ("serial: samsung: add dma reqest/release functions") CC: stable@vger.kernel.org # v4.0+ Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
NeilBrown authored
[ Upstream commit c8a139d0 ] ops->show() can return a negative error code. Commit 65da3484 ("sysfs: correctly handle short reads on PREALLOC attrs.") (in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors would look like large numbers. As a result, if an error is returned, sysfs_kf_read() will return the value of 'count', typically 4096. Commit 17d0774f ("sysfs: correctly handle read offset on PREALLOC attrs") (in v4.8) extended this error to use the unsigned large 'len' as a size for memmove(). Consequently, if ->show returns an error, then the first read() on the sysfs file will return 4096 and could return uninitialized memory to user-space. If the application performs a subsequent read, this will trigger a memmove() with extremely large count, and is likely to crash the machine is bizarre ways. This bug can currently only be triggered by reading from an md sysfs attribute declared with __ATTR_PREALLOC() during the brief period between when mddev_put() deletes an mddev from the ->all_mddevs list, and when mddev_delayed_delete() - which is scheduled on a workqueue - completes. Before this, an error won't be returned by the ->show() After this, the ->show() won't be called. I can reproduce it reliably only by putting delay like usleep_range(500000,700000); early in mddev_delayed_delete(). Then after creating an md device md0 run echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state The bug can be triggered without the usleep. Fixes: 65da3484 ("sysfs: correctly handle short reads on PREALLOC attrs.") Fixes: 17d0774f ("sysfs: correctly handle read offset on PREALLOC attrs") Cc: stable@vger.kernel.org Signed-off-by:
NeilBrown <neilb@suse.com> Acked-by:
Tejun Heo <tj@kernel.org> Reported-and-tested-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
-
Shuxiao Zhang authored
[ Upstream commit 97fbfef6 ] vfs_llseek will check whether the file mode has FMODE_LSEEK, no return failure. But ashmem can be lseek, so add FMODE_LSEEK to ashmem file. Comment From Greg Hackmann: ashmem_llseek() passes the llseek() call through to the backing shmem file. 91360b02 ("ashmem: use vfs_llseek()") changed this from directly calling the file's llseek() op into a VFS layer call. This also adds a check for the FMODE_LSEEK bit, so without that bit ashmem_llseek() now always fails with -ESPIPE. Fixes: 91360b02 ("ashmem: use vfs_llseek()") Signed-off-by:
Shuxiao Zhang <zhangshuxiao@xiaomi.com> Tested-by:
Greg Hackmann <ghackmann@google.com> Cc: stable <stable@vger.kernel.org> # 3.18+ Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 2c930e3d ] Add missing continue in switch. Addresses-Coverity-ID: 1248733 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
bsegall@google.com authored
[ Upstream commit 5402e97a ] In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against __TASK_TRACED. If this races with the ptrace_unfreeze_traced at the end of a PTRACE_LISTEN, this can wake the task /after/ the check against __TASK_TRACED, but before the reset of state to TASK_TRACED. This causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup against TRACED while the task is still on the rq wake_list, corrupting it. Oleg said: "The kernel can crash or this can lead to other hard-to-debug problems. In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced() assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the contract. Obviusly it is very wrong to manipulate task->state if this task is already running, or WAKING, or it sleeps again" [akpm@linux-foundation.org: coding-style fixes] Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL") Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.comSigned-off-by:
Ben Segall <bsegall@google.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Martin K. Petersen authored
[ Upstream commit 7c856152 ] We previously made sure that the reported disk capacity was less than 0xffffffff blocks when the kernel was not compiled with large sector_t support (CONFIG_LBDAF). However, this check assumed that the capacity was reported in units of 512 bytes. Add a sanity check function to ensure that we only enable disks if the entire reported capacity can be expressed in terms of sector_t. Cc: <stable@vger.kernel.org> Reported-by:
Steve Magnani <steve.magnani@digidescorp.com> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Martin K. Petersen authored
[ Upstream commit a00a7862 ] Kefeng Wang discovered that old versions of the QEMU CD driver would return mangled mode data causing us to walk off the end of the buffer in an attempt to parse it. Sanity check the returned mode sense data. Cc: <stable@vger.kernel.org> Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by:
-
Joeseph Chang authored
[ Upstream commit 6de65fcf ] msg_written_handler() may set ssif_info->multi_data to NULL when using ipmitool to write fru. Before setting ssif_info->multi_data to NULL, add new local pointer "data_to_send" and store correct i2c data pointer to it to fix NULL pointer kernel panic and incorrect ssif_info->multi_pos. Signed-off-by:
Joeseph Chang <joechang@codeaurora.org> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org # 3.19- Signed-off-by:
-
Juergen Gross authored
[ Upstream commit 9121b15b ] Connecting to the backend isn't working reliably in xen-fbfront: in case XenbusStateInitWait of the backend has been missed the backend transition to XenbusStateConnected will trigger the connected state only without doing the actions required when the backend has connected. Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Jan-Marek Glogowski authored
[ Upstream commit 806a28ef ] Currently the cifs module breaks the CIFS specs on reconnect as described in http://msdn.microsoft.com/en-us/library/cc246529.aspx: "TreeId (4 bytes): Uniquely identifies the tree connect for the command. This MUST be 0 for the SMB2 TREE_CONNECT Request." Signed-off-by:
Jan-Marek Glogowski <glogow@fbihome.de> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Tested-by:
Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit a5cb00eb ] Clock should be turned off after calling s5p_mfc_init_hw() from the watchdog worker, like it is already done in the s5p_mfc_open() which also calls this function. Fixes: af935746 ("[media] MFC: Add MFC 5.1 V4L2 driver") Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit aa58fedb ] Make sure to check the number of endpoints to avoid accessing memory beyond the endpoint array should a device lack the expected endpoints. Note that, as far as I can tell, the gspca framework has already made sure there is at least one endpoint in the current alternate setting so there should be no risk for a NULL-pointer dereference here. Fixes: b517af72 ("V4L/DVB: gspca_konica: New gspca subdriver for konica chipset using cams") Cc: stable <stable@vger.kernel.org> # 2.6.37 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Shamir Rabinovitch authored
[ Upstream commit 771a5258 ] When udev renames the netdev devices, ipoib debugfs entries does not get renamed. As a result, if subsequent probe of ipoib device reuse the name then creating a debugfs entry for the new device would fail. Also, moved ipoib_create_debug_files and ipoib_delete_debug_files as part of ipoib event handling in order to avoid any race condition between these. Fixes: 1732b0ef ([IPoIB] add path record information in debugfs) Cc: stable@vger.kernel.org # 2.6.15+ Signed-off-by:
Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by:
Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
James Hogan authored
[ Upstream commit b884a190 ] The rapf copy loops in the Meta usercopy code is missing some extable entries for HTP cores with unaligned access checking enabled, where faults occur on the instruction immediately after the faulting access. Add the fixup labels and extable entries for these cases so that corner case user copy failures don't cause kernel crashes. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by:
-
James Hogan authored
[ Upstream commit 2c0b1df8 ] The fixup code to rewind the source pointer in __asm_copy_from_user_{32,64}bit_rapf_loop() always rewound the source by a single unit (4 or 8 bytes), however this is insufficient if the fault didn't occur on the first load in the loop, as the source pointer will have been incremented but nothing will have been stored until all 4 register [pairs] are loaded. Read the LSM_STEP field of TXSTATUS (which is already loaded into a register), a bit like the copy_to_user versions, to determine how many iterations of MGET[DL] have taken place, all of which need rewinding. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
-
James Hogan authored
[ Upstream commit fd40eee1 ] The fixup code for the copy_to_user rapf loops reads TXStatus.LSM_STEP to decide how far to rewind the source pointer. There is a special case for the last execution of an MGETL/MGETD, since it leaves LSM_STEP=0 even though the number of MGETLs/MGETDs attempted was 4. This uses ADDZ which is conditional upon the Z condition flag, but the AND instruction which masked the TXStatus.LSM_STEP field didn't set the condition flags based on the result. Fix that now by using ANDS which does set the flags, and also marking the condition codes as clobbered by the inline assembly. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
-
James Hogan authored
[ Upstream commit 563ddc10 ] Currently we try to zero the destination for a failed read from userland in fixup code in the usercopy.c macros. The rest of the destination buffer is then zeroed from __copy_user_zeroing(), which is used for both copy_from_user() and __copy_from_user(). Unfortunately we fail to zero in the fixup code as D1Ar1 is set to 0 before the fixup code entry labels, and __copy_from_user() shouldn't even be zeroing the rest of the buffer. Move the zeroing out into copy_from_user() and rename __copy_user_zeroing() to raw_copy_from_user() since it no longer does any zeroing. This also conveniently matches the name needed for RAW_COPY_USER support in a later patch. Fixes: 373cd784 ("metag: Memory handling") Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
James Hogan authored
[ Upstream commit fb8ea062 ] When copying to userland on Meta, if any faults are encountered immediately abort the copy instead of continuing on and repeatedly faulting, and worse potentially copying further bytes successfully to subsequent valid pages. Fixes: 373cd784 ("metag: Memory handling") Reported-by:
-
James Hogan authored
[ Upstream commit 22572119 ] Fix the error checking of the alignment adjustment code in raw_copy_from_user(), which mistakenly considers it safe to skip the error check when aligning the source buffer on a 2 or 4 byte boundary. If the destination buffer was unaligned it may have started to copy using byte or word accesses, which could well be at the start of a new (valid) source page. This would result in it appearing to have copied 1 or 2 bytes at the end of the first (invalid) page rather than none at all. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
-
James Hogan authored
[ Upstream commit ef62a2d8 ] Metag's lib/usercopy.c has a bunch of copy_from_user macros for larger copies between 5 and 16 bytes which are completely unused. Before fixing zeroing lets drop these macros so there is less to fix. Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 62277de7 ] In case of error, the function kthread_run() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Link: http://lkml.kernel.org/r/1466184839-14927-1-git-send-email-weiyj_lk@163.com Cc: stable@vger.kernel.org Fixes: 6c43e554 ("ring-buffer: Add ring buffer startup selftest") Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Horia Geantă authored
[ Upstream commit 40c98cb5 ] RNG instantiation was previously fixed by commit 62743a41 ("crypto: caam - fix RNG init descriptor ret. code checking") while deinstantiation was not addressed. Since the descriptors used are similar, in the sense that they both end with a JUMP HALT command, checking for errors should be similar too, i.e. status code 7000_0000h should be considered successful. Cc: <stable@vger.kernel.org> # 3.13+ Fixes: 1005bccd ("crypto: caam - enable instantiation of all RNG4 state handles") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Frederic Barrat authored
[ Upstream commit 88b1bf72 ] Commit 4c6d9acc ("powerpc/mm: Add hooks for cxl") converted local TLB invalidates to global if the cxl driver is active. This is necessary because the CAPP snoops invalidations to forward them to the PSL on the cxl adapter. However one path was forgotten. native_flush_hash_range() still does local TLB invalidates, as found out the hard way recently. This patch fixes it by following the same logic as previously: if the cxl driver is active, the local TLB invalidates are 'upgraded' to global. Fixes: 4c6d9acc ("powerpc/mm: Add hooks for cxl") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit ebeb3667 ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: 36bcce43 ("ath9k_htc: Handle storage devices") Cc: stable <stable@vger.kernel.org> # 2.6.39+ Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Paul Mackerras authored
[ Upstream commit 48fe9e94 ] In the past, there was only one load-with-reservation instruction, lwarx, and if a program attempted a lwarx on a misaligned address, it would take an alignment interrupt and the kernel handler would emulate it as though it was lwzx, which was not really correct, but benign since it is loading the right amount of data, and the lwarx should be paired with a stwcx. to the same address, which would also cause an alignment interrupt which would result in a SIGBUS being delivered to the process. We now have 5 different sizes of load-with-reservation instruction. Of those, lharx and ldarx cause an immediate SIGBUS by luck since their entries in aligninfo[] overlap instructions which were not fixed up, but lqarx overlaps with lhz and will be emulated as such. lbarx can never generate an alignment interrupt since it only operates on 1 byte. To straighten this out and fix the lqarx case, this adds code to detect the l[hwdq]arx instructions and return without fixing them up, resulting in a SIGBUS being delivered to the process. Cc: stable@vger.kernel.org Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Suzuki K Poulose authored
[ Upstream commit 8b3405e3 ] In kvm_free_stage2_pgd() we don't hold the kvm->mmu_lock while calling unmap_stage2_range() on the entire memory range for the guest. This could cause problems with other callers (e.g, munmap on a memslot) trying to unmap a range. And since we have to unmap the entire Guest memory range holding a spinlock, make sure we yield the lock if necessary, after we unmap each PUD range. Fixes: commit d5d8184d ("KVM: ARM: Memory virtualization setup") Cc: stable@vger.kernel.org # v3.10+ Cc: Paolo Bonzini <pbonzin@redhat.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> [ Avoid vCPU starvation and lockup detector warnings ] Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
-
Nayna Jain authored
[ Upstream commit 0afb7118 ] Currently, there is an unnecessary 1 msec delay added in i2c_nuvoton_write_status() for the successful case. This function is called multiple times during send() and recv(), which implies adding multiple extra delays for every TPM operation. This patch calls usleep_range() only if retry is to be done. Signed-off-by:
Nayna Jain <nayna@linux.vnet.ibm.com> Cc: stable@vger.kernel.org (linux-4.8) Reviewed-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Jerry Snitselaar authored
[ Upstream commit 8569defd ] Make sure size of response buffer is at least 6 bytes, or we will underflow and pass large size_t to memcpy_fromio(). This was encountered while testing earlier version of locality patchset. Cc: stable@vger.kernel.org Fixes: 30fc8d13 ("tpm: TPM 2.0 CRB Interface") Signed-off-by:
Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by:
-
Nayna Jain authored
[ Upstream commit a233a028 ] Commit 500462a9 "timers: Switch to a non-cascading wheel" replaced the 'classic' timer wheel, which aimed for near 'exact' expiry of the timers. Their analysis was that the vast majority of timeout timers are used as safeguards, not as real timers, and are cancelled or rearmed before expiration. The only exception noted to this were networking timers with a small expiry time. Not included in the analysis was the TPM polling timer, which resulted in a longer normal delay and, every so often, a very long delay. The non-cascading wheel delay is based on CONFIG_HZ. For a description of the different rings and their delays, refer to the comments in kernel/time/timer.c. Below are the delays given for rings 0 - 2, which explains the longer "normal" delays and the very, long delays as seen on systems with CONFIG_HZ 250. * HZ 1000 steps * Level Offset Granularity Range * 0 0 1 ms 0 ms - 63 ms * 1 64 8 ms 64 ms - 511 ms * 2 128 64 ms 512 ms - 4095 ms (512ms - ~4s) * HZ 250 * Level Offset Granularity Range * 0 0 4 ms 0 ms - 255 ms * 1 64 32 ms 256 ms - 2047 ms (256ms - ~2s) * 2 128 256 ms 2048 ms - 16383 ms (~2s - ~16s) Below is a comparison of extending the TPM with 1000 measurements, using msleep() vs. usleep_delay() when configured for 1000 hz vs. 250 hz, before and after commit 500462a9. linux-4.7 | msleep() usleep_range() 1000 hz: 0m44.628s | 1m34.497s 29.243s 250 hz: 1m28.510s | 4m49.269s 32.386s linux-4.7 | min-max (msleep) min-max (usleep_range) 1000 hz: 0:017 - 2:760s | 0:015 - 3:967s 0:014 - 0:418s 250 hz: 0:028 - 1:954s | 0:040 - 4:096s 0:016 - 0:816s This patch replaces the msleep() with usleep_range() calls in the i2c nuvoton driver with a consistent max range value. Signed-of-by:
-
Nicholas Bellinger authored
[ Upstream commit 1c99de98 ] Once upon a time back in 2009, a work-around was added to support the GlobalSAN iSCSI initiator v3.3 for MacOSX, which during login did not propose nor respond to MaxBurstLength, FirstBurstLength, DefaultTime2Wait and DefaultTime2Retain keys. The work-around in iscsi_check_proposer_for_optional_reply() allowed the missing keys to be proposed, but did not require waiting for a response before moving to full feature phase operation. This allowed GlobalSAN v3.3 to work out-of-the box, and for many years we didn't run into login interopt issues with any other initiators.. Until recently, when Martin tried a QLogic 57840S iSCSI Offload HBA on Windows 2016 which completed login, but subsequently failed with: Got unknown iSCSI OpCode: 0x43 The issue was QLogic MSFT side did not propose DefaultTime2Wait + DefaultTime2Retain, so LIO proposes them itself, and immediately transitions to full feature phase because of the GlobalSAN hack. However, the QLogic MSFT side still attempts to respond to DefaultTime2Retain + DefaultTime2Wait, even though LIO has set ISCSI_FLAG_LOGIN_NEXT_STAGE3 + ISCSI_FLAG_LOGIN_TRANSIT in last login response. So while the QLogic MSFT side should have been proposing these two keys to start, it was doing the correct thing per RFC-3720 attempting to respond to proposed keys before transitioning to full feature phase. All that said, recent versions of GlobalSAN iSCSI (v5.3.0.541) does correctly propose the four keys during login, making the original work-around moot. So in order to allow QLogic MSFT to run unmodified as-is, go ahead and drop this long standing work-around. Reported-by:
Martin Svec <martin.svec@zoner.cz> Cc: Martin Svec <martin.svec@zoner.cz> Cc: Himanshu Madhani <Himanshu.Madhani@cavium.com> Cc: Arun Easi <arun.easi@cavium.com> Cc: stable@vger.kernel.org # 3.1+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Tobias Herzog authored
[ Upstream commit 1bb9914e ] Notifications may only be 8 bytes long. Accessing the 9th and 10th byte of unimplemented/unknown notifications may be insecure. Also check the length of known notifications before accessing anything behind the 8th byte. Signed-off-by:
Tobias Herzog <t-herzog@gmx.de> Acked-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Naoya Horiguchi authored
[ Upstream commit c9d398fa ] I found the race condition which triggers the following bug when move_pages() and soft offline are called on a single hugetlb page concurrently. Soft offlining page 0x119400 at 0x700000000000 BUG: unable to handle kernel paging request at ffffea0011943820 IP: follow_huge_pmd+0x143/0x190 PGD 7ffd2067 PUD 7ffd1067 PMD 0 [61163.582052] Oops: 0000 [#1] SMP Modules linked in: binfmt_misc ppdev virtio_balloon parport_pc pcspkr i2c_piix4 parport i2c_core acpi_cpufreq ip_tables xfs libcrc32c ata_generic pata_acpi virtio_blk 8139too crc32c_intel ata_piix serio_raw libata virtio_pci 8139cp virtio_ring virtio mii floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: cap_check] CPU: 0 PID: 22573 Comm: iterate_numa_mo Tainted: P OE 4.11.0-rc2-mm1+ #2 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:follow_huge_pmd+0x143/0x190 RSP: 0018:ffffc90004bdbcd0 EFLAGS: 00010202 RAX: 0000000465003e80 RBX: ffffea0004e34d30 RCX: 00003ffffffff000 RDX: 0000000011943800 RSI: 0000000000080001 RDI: 0000000465003e80 RBP: ffffc90004bdbd18 R08: 0000000000000000 R09: ffff880138d34000 R10: ffffea0004650000 R11: 0000000000c363b0 R12: ffffea0011943800 R13: ffff8801b8d34000 R14: ffffea0000000000 R15: 000077ff80000000 FS: 00007fc977710740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea0011943820 CR3: 000000007a746000 CR4: 00000000001406f0 Call Trace: follow_page_mask+0x270/0x550 SYSC_move_pages+0x4ea/0x8f0 SyS_move_pages+0xe/0x10 do_syscall_64+0x67/0x180 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7fc976e03949 RSP: 002b:00007ffe72221d88 EFLAGS: 00000246 ORIG_RAX: 0000000000000117 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc976e03949 RDX: 0000000000c22390 RSI: 0000000000001400 RDI: 0000000000005827 RBP: 00007ffe72221e00 R08: 0000000000c2c3a0 R09: 0000000000000004 R10: 0000000000c363b0 R11: 0000000000000246 R12: 0000000000400650 R13: 00007ffe72221ee0 R14: 0000000000000000 R15: 0000000000000000 Code: 81 e4 ff ff 1f 00 48 21 c2 49 c1 ec 0c 48 c1 ea 0c 4c 01 e2 49 bc 00 00 00 00 00 ea ff ff 48 c1 e2 06 49 01 d4 f6 45 bc 04 74 90 <49> 8b 7c 24 20 40 f6 c7 01 75 2b 4c 89 e7 8b 47 1c 85 c0 7e 2a RIP: follow_huge_pmd+0x143/0x190 RSP: ffffc90004bdbcd0 CR2: ffffea0011943820 ---[ end trace e4f81353a2d23232 ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled This bug is triggered when pmd_present() returns true for non-present hugetlb, so fixing the present check in follow_huge_pmd() prevents it. Using pmd_present() to determine present/non-present for hugetlb is not correct, because pmd_present() checks multiple bits (not only _PAGE_PRESENT) for historical reason and it can misjudge hugetlb state. Fixes: e66f17ff ("mm/hugetlb: take page table lock in follow_huge_pmd()") Link: http://lkml.kernel.org/r/1490149898-20231-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by:
-
Hui Wang authored
[ Upstream commit 2f726aec ] On this Dell AIO machine, the lineout jack does not work. We found the pin 0x1a is assigned to lineout on this machine, and in the past, we applied ALC298_FIXUP_DELL1_MIC_NO_PRESENCE to fix the heaset-set mic problem for this machine, this fixup will redefine the pin 0x1a to headphone-mic, as a result the lineout doesn't work anymore. After consulting with Dell, they told us this machine doesn't support microphone via headset jack, so we add a new fixup which only defines the pin 0x18 as the headset-mic. [rearranged the fixup insertion position by tiwai in order to make the merge with other branches easier -- tiwai] Fixes: 59ec4b57 ("ALSA: hda - Fix headset mic detection problem for two dell machines") Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Li Qiang authored
[ Upstream commit e7e11f99 ] In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the 'req->mip_levels' array. This array can be assigned any value from the user space. As both the 'num_sizes' and the array is uint32_t, it is easy to make 'num_sizes' overflow. The later 'mip_levels' is used as the loop count. This can lead an oob write. Add the check of 'req->mip_levels' to avoid this. Cc: <stable@vger.kernel.org> Signed-off-by:
Li Qiang <liqiang6-s@360.cn> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
[ Upstream commit 53e16798 ] The mesa winsys sometimes uses unimplemented parameter requests to check for features. Remove the error message to avoid bloating the kernel log. Cc: <stable@vger.kernel.org> Signed-off-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Murray McAllister authored
[ Upstream commit 63774069 ] In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()), which can leak useful addresses to dmesg. Add check to avoid a size of 0. Cc: <stable@vger.kernel.org> Signed-off-by:
Murray McAllister <murray.mcallister@insomniasec.com> Reviewed-by:
-
Murray McAllister authored
[ Upstream commit 36274ab8 ] Before memory allocations vmw_surface_define_ioctl() checks the upper-bounds of a user-supplied size, but does not check if the supplied size is 0. Add check to avoid NULL pointer dereferences. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Thomas Hellstrom authored
[ Upstream commit f7652afa ] A malicious caller could otherwise hand over handles to other objects causing all sorts of interesting problems. Testing done: Ran a Fedora 25 desktop using both Xorg and gnome-shell/Wayland. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Nicholas Bellinger authored
[ Upstream commit efb2ea77 ] This patch fixes a iscsi-target specific TMR reference leak during session shutdown, that could occur when a TMR was quiesced before the hand-off back to iscsi-target code via transport_cmd_check_stop_to_fabric(). The reference leak happens because iscsit_free_cmd() was incorrectly skipping the final target_put_sess_cmd() for TMRs when transport_generic_free_cmd() returned zero because the se_cmd->cmd_kref did not reach zero, due to the missing se_cmd assignment in original code. The result was iscsi_cmd and it's associated se_cmd memory would be freed once se_sess->sess_cmd_map where released, but the associated se_tmr_req was leaked and remained part of se_device->dev_tmr_list. This bug would manfiest itself as kernel paging request OOPsen in core_tmr_lun_reset(), when a left-over se_tmr_req attempted to dereference it's se_cmd pointer that had already been released during normal session shutdown. To address this bug, go ahead and treat ISCSI_OP_SCSI_CMD and ISCSI_OP_SCSI_TMFUNC the same when there is an extra se_cmd->cmd_kref to drop in iscsit_free_cmd(), and use op_scsi to signal __iscsit_free_cmd() when the former needs to clear any further iscsi related I/O state. Reported-by:
Rob Millner <rlm@daterainc.com> Cc: Rob Millner <rlm@daterainc.com> Reported-by:
Chu Yuan Lin <cyl@datera.io> Cc: Chu Yuan Lin <cyl@datera.io> Tested-by:
-
