- 11 Feb, 2014 19 commits
-
-
Junxiao Bi authored
fs-writeback will release the dirty pages without page lock whose offset are over inode size, the release happens at block_write_full_page_endio(). If not update, dirty pages in file holes may be released before flushed to the disk, then file holes will contain some non-zero data, this will cause sparse file md5sum error. To reproduce the bug, find a big sparse file with many holes, like vm image file, its actual size should be bigger than available mem size to make writeback work more frequently, tar it with -S option, then keep untar it and check its md5sum again and again until you get a wrong md5sum. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Younger Liu <younger.liu@huawei.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Younger Liu authored
The issue scenario is as following: - Create a small file and fallocate a large disk space for a file with FALLOC_FL_KEEP_SIZE option. - ftruncate the file back to the original size again. but the disk free space is not changed back. This is a real bug that be fixed in this patch. In order to solve the issue above, we modified ocfs2_setattr(), if attr->ia_size != i_size_read(inode), It calls ocfs2_truncate_file(), and truncate disk space to attr->ia_size. Signed-off-by:
Younger Liu <younger.liu@huawei.com> Reviewed-by:
Jie Liu <jeff.liu@oracle.com> Tested-by:
Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Sunil Mushran <sunil.mushran@gmail.com> Reviewed-by:
Jensen <shencanquan@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Naoya Horiguchi authored
mce-test detected a test failure when injecting error to a thp tail page. This is because we take page refcount of the tail page in madvise_hwpoison() while the fix in commit a3e0f9e4 ("mm/memory-failure.c: transfer page count from head page to tail page after split thp") assumes that we always take refcount on the head page. When a real memory error happens we take refcount on the head page where memory_failure() is called without MF_COUNT_INCREASED set, so it seems to me that testing memory error on thp tail page using madvise makes little sense. This patch cancels moving refcount in !MF_COUNT_INCREASED for valid testing. [akpm@linux-foundation.org: s/&&/&/] Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: <stable@vger.kernel.org> [3.9+: a3e0f9e4] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Gortmaker authored
Use what we already do for arch_disable_smp_support() to fix these: arch/x86/kernel/smpboot.c:1155:6: warning: symbol 'arch_enable_nonboot_cpus_begin' was not declared. Should it be static? arch/x86/kernel/smpboot.c:1160:6: warning: symbol 'arch_enable_nonboot_cpus_end' was not declared. Should it be static? kernel/cpu.c:512:13: warning: symbol 'arch_enable_nonboot_cpus_begin' was not declared. Should it be static? kernel/cpu.c:516:13: warning: symbol 'arch_enable_nonboot_cpus_end' was not declared. Should it be static? Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rafael Aquini authored
Changes in commit a0b8cab3 ("mm: remove lru parameter from __pagevec_lru_add and remove parts of pagevec API") have introduced a call to add_to_page_cache_lru() which causes a leak in nfs_symlink() as now the page gets an extra refcount that is not dropped. Jan Stancek observed and reported the leak effect while running test8 from Connectathon Testsuite. After several iterations over the test case, which creates several symlinks on a NFS mountpoint, the test system was quickly getting into an out-of-memory scenario. This patch fixes the page leak by dropping that extra refcount add_to_page_cache_lru() is grabbing. Signed-off-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Rafael Aquini <aquini@redhat.com> Acked-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: <stable@vger.kernel.org> [3.11.x+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Steven Rostedt authored
Vladimir reported the following issue: Commit c65c1877 ("slub: use lockdep_assert_held") requires remove_partial() to be called with n->list_lock held, but free_partial() called from kmem_cache_close() on cache destruction does not follow this rule, leading to a warning: WARNING: CPU: 0 PID: 2787 at mm/slub.c:1536 __kmem_cache_shutdown+0x1b2/0x1f0() Modules linked in: CPU: 0 PID: 2787 Comm: modprobe Tainted: G W 3.14.0-rc1-mm1+ #1 Hardware name: 0000000000000600 ffff88003ae1dde8 ffffffff816d9583 0000000000000600 0000000000000000 ffff88003ae1de28 ffffffff8107c107 0000000000000000 ffff880037ab2b00 ffff88007c240d30 ffffea0001ee5280 ffffea0001ee52a0 Call Trace: __kmem_cache_shutdown+0x1b2/0x1f0 kmem_cache_destroy+0x43/0xf0 xfs_destroy_zones+0x103/0x110 [xfs] exit_xfs_fs+0x38/0x4e4 [xfs] SyS_delete_module+0x19a/0x1f0 system_call_fastpath+0x16/0x1b His solution was to add a spinlock in order to quiet lockdep. Although there would be no contention to adding the lock, that lock also requires disabling of interrupts which will have a larger impact on the system. Instead of adding a spinlock to a location where it is not needed for lockdep, make a __remove_partial() function that does not test if the list_lock is held, as no one should have it due to it being freed. Also added a __add_partial() function that does not do the lock validation either, as it is not needed for the creation of the cache. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Reported-by:
Vladimir Davydov <vdavydov@parallels.com> Suggested-by:
David Rientjes <rientjes@google.com> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Vladimir Davydov <vdavydov@parallels.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Borislav Petkov authored
This is used by kbuild to load preset Kconfig options. We need to ignore it, otherwise git clean kills it. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Younger Liu authored
If filesystem is readonly, there is no need to flush drive's caches or force any uncommitted transactions. [akpm@linux-foundation.org: return -EROFS, not 0] Signed-off-by:
Younger Liu <younger.liucn@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Prarit Bhargava authored
If you do echo 0 > /sys/module/edac_core/parameters/edac_mc_poll_msec the following stack trace is output because the edac module is not designed to poll with a timeout of zero. WARNING: CPU: 12 PID: 0 at lib/list_debug.c:33 __list_add+0xac/0xc0() list_add corruption. prev->next should be next (ffff8808291dd1b8), but was (null). (prev=ffff8808286fe3f8). Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU: 12 PID: 0 Comm: swapper/12 Not tainted 3.13.0+ #1 Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 Call Trace: <IRQ> __list_add+0xac/0xc0 __internal_add_timer+0xab/0x130 internal_add_timer+0x17/0x40 mod_timer_pinned+0xca/0x170 intel_pstate_timer_func+0x28a/0x380 call_timer_fn+0x36/0x100 run_timer_softirq+0x1ff/0x2f0 __do_softirq+0xf5/0x2e0 irq_exit+0x10d/0x120 smp_apic_timer_interrupt+0x45/0x60 apic_timer_interrupt+0x6d/0x80 <EOI> cpuidle_idle_call+0xb9/0x1f0 arch_cpu_idle+0xe/0x30 cpu_startup_entry+0x9e/0x240 start_secondary+0x1e4/0x290 kernel BUG at kernel/timer.c:1084! invalid opcode: 0000 [#1] SMP Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU: 12 PID: 0 Comm: swapper/12 Tainted: G W 3.13.0+ #1 Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 Call Trace: <IRQ> run_timer_softirq+0x245/0x2f0 __do_softirq+0xf5/0x2e0 irq_exit+0x10d/0x120 smp_apic_timer_interrupt+0x45/0x60 apic_timer_interrupt+0x6d/0x80 <EOI> cpuidle_idle_call+0xb9/0x1f0 arch_cpu_idle+0xe/0x30 cpu_startup_entry+0x9e/0x240 start_secondary+0x1e4/0x290 RIP cascade+0x93/0xa0 WARNING: CPU: 36 PID: 1154 at kernel/workqueue.c:1461 __queue_delayed_work+0xed/0x1a0() Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU: 36 PID: 1154 Comm: kworker/u481:3 Tainted: G W 3.13.0+ #1 Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 Workqueue: edac-poller edac_mc_workq_function [edac_core] Call Trace: dump_stack+0x45/0x56 warn_slowpath_common+0x7d/0xa0 warn_slowpath_null+0x1a/0x20 __queue_delayed_work+0xed/0x1a0 queue_delayed_work_on+0x27/0x50 edac_mc_workq_function+0x72/0xa0 [edac_core] process_one_work+0x17b/0x460 worker_thread+0x11b/0x400 kthread+0xd2/0xf0 ret_from_fork+0x7c/0xb0 This patch adds a range check in the edac_mc_poll_msec code to check for 0. Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Eric W. Biederman authored
Recently due to a spike in connections per second memcached on 3 separate boxes triggered the OOM killer from accept. At the time the OOM killer was triggered there was 4GB out of 36GB free in zone 1. The problem was that alloc_fdtable was allocating an order 3 page (32KiB) to hold a bitmap, and there was sufficient fragmentation that the largest page available was 8KiB. I find the logic that PAGE_ALLOC_COSTLY_ORDER can't fail pretty dubious but I do agree that order 3 allocations are very likely to succeed. There are always pathologies where order > 0 allocations can fail when there are copious amounts of free memory available. Using the pigeon hole principle it is easy to show that it requires 1 page more than 50% of the pages being free to guarantee an order 1 (8KiB) allocation will succeed, 1 page more than 75% of the pages being free to guarantee an order 2 (16KiB) allocation will succeed and 1 page more than 87.5% of the pages being free to guarantee an order 3 allocate will succeed. A server churning memory with a lot of small requests and replies like memcached is a common case that if anything can will skew the odds against large pages being available. Therefore let's not give external applications a practical way to kill linux server applications, and specify __GFP_NORETRY to the kmalloc in alloc_fdmem. Unless I am misreading the code and by the time the code reaches should_alloc_retry in __alloc_pages_slowpath (where __GFP_NORETRY becomes signification). We have already tried everything reasonable to allocate a page and the only thing left to do is wait. So not waiting and falling back to vmalloc immediately seems like the reasonable thing to do even if there wasn't a chance of triggering the OOM killer. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Cong Wang <cwang@twopensource.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mel Gorman authored
Steven Noonan forwarded a users report where they had a problem starting vsftpd on a Xen paravirtualized guest, with this in dmesg: BUG: Bad page map in process vsftpd pte:8000000493b88165 pmd:e9cc01067 page:ffffea00124ee200 count:0 mapcount:-1 mapping: (null) index:0x0 page flags: 0x2ffc0000000014(referenced|dirty) addr:00007f97eea74000 vm_flags:00100071 anon_vma:ffff880e98f80380 mapping: (null) index:7f97eea74 CPU: 4 PID: 587 Comm: vsftpd Not tainted 3.12.7-1-ec2 #1 Call Trace: dump_stack+0x45/0x56 print_bad_pte+0x22e/0x250 unmap_single_vma+0x583/0x890 unmap_vmas+0x65/0x90 exit_mmap+0xc5/0x170 mmput+0x65/0x100 do_exit+0x393/0x9e0 do_group_exit+0xcc/0x140 SyS_exit_group+0x14/0x20 system_call_fastpath+0x1a/0x1f Disabling lock debugging due to kernel taint BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:0 val:-1 BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:1 val:1 The issue could not be reproduced under an HVM instance with the same kernel, so it appears to be exclusive to paravirtual Xen guests. He bisected the problem to commit 1667918b ("mm: numa: clear numa hinting information on mprotect") that was also included in 3.12-stable. The problem was related to how xen translates ptes because it was not accounting for the _PAGE_NUMA bit. This patch splits pte_present to add a pteval_present helper for use by xen so both bare metal and xen use the same code when checking if a PTE is present. [mgorman@suse.de: wrote changelog, proposed minor modifications] [akpm@linux-foundation.org: fix typo in comment] Reported-by:
Steven Noonan <steven@uplinklabs.net> Tested-by:
Steven Noonan <steven@uplinklabs.net> Signed-off-by:
Elena Ufimtseva <ufimtseva@gmail.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Rientjes authored
Commit c65c1877 ("slub: use lockdep_assert_held") incorrectly required that add_full() and remove_full() hold n->list_lock. The lock is only taken when kmem_cache_debug(s), since that's the only time it actually does anything. Require that the lock only be taken under such a condition. Reported-by:
Larry Finger <Larry.Finger@lwfinger.net> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Tested-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
drivers/md/bcache/extents.c: In function `btree_ptr_bad_expensive': drivers/md/bcache/extents.c:196: warning: format `%li' expects type `long int', but argument 4 has type `size_t' Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kent Overstreet <kmo@daterainc.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Pearson authored
Currently, update_note_header_size_elf64() and update_note_header_size_elf32() will add the size of a PT_NOTE entry to real_sz even if that causes real_sz to exceeds max_sz. This patch corrects the while loop logic in those routines to ensure that does not happen and prints a warning if a PT_NOTE entry is dropped. If zero PT_NOTE entries are found or this condition is encountered because the only entry was dropped, a warning is printed and an error is returned. One possible negative side effect of exceeding the max_sz limit is an allocation failure in merge_note_headers_elf64() or merge_note_headers_elf32() which would produce console output such as the following while booting the crash kernel. vmalloc: allocation failure: 14076997632 bytes swapper/0: page allocation failure: order:0, mode:0x80d2 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-gbp1 #7 Call Trace: dump_stack+0x19/0x1b warn_alloc_failed+0xf0/0x160 __vmalloc_node_range+0x19e/0x250 vmalloc_user+0x4c/0x70 merge_note_headers_elf64.constprop.9+0x116/0x24a vmcore_init+0x2d4/0x76c do_one_initcall+0xe2/0x190 kernel_init_freeable+0x17c/0x207 kernel_init+0xe/0x180 ret_from_fork+0x7c/0xb0 Kdump: vmcore not initialized kdump: dump target is /dev/sda4 kdump: saving to /sysroot//var/crash/127.0.0.1-2014.01.28-13:58:52/ kdump: saving vmcore-dmesg.txt Cannot open /proc/vmcore: No such file or directory kdump: saving vmcore-dmesg.txt failed kdump: saving vmcore kdump: saving vmcore failed This type of failure has been seen on a four socket prototype system with certain memory configurations. Most PT_NOTE sections have a single entry similar to: n_namesz = 0x5 n_descsz = 0x150 n_type = 0x1 Occasionally, a second entry is encountered with very large n_namesz and n_descsz sizes: n_namesz = 0x80000008 n_descsz = 0x510ae163 n_type = 0x80000008 Not yet sure of the source of these extra entries, they seem bogus, but they shouldn't cause crash dump to fail. Signed-off-by:
Greg Pearson <greg.pearson@hp.com> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Khoroshilov authored
i2o_cfg_compat_ioctl(I2OGETIOPS) locks i2o_cfg_mutex and then calls i2o_cfg_ioctl(I2OGETIOPS) that locks i2o_cfg_mutex as well. A deadlock is guaranteed. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Henrik Austad authored
Some of the 00-INDEX files are somewhat outdated and some folders does not contain 00-INDEX at all. Only outdated (with the notably exception of spi) indexes are touched here, the 169 folders without 00-INDEX has not been touched. New 00-INDEX - spi/* was added in a series of commits dating back to 2006 Added files (missing in (*/)00-INDEX) - dmatest.txt was added by commit 851b7e16 ("dmatest: run test via debugfs") - this_cpu_ops.txt was added by commit a1b2a555 ("percpu: add documentation on this_cpu operations") - ww-mutex-design.txt was added by commit 040a0a37 ("mutex: Add support for wound/wait style locks") - bcache.txt was added by commit cafe5635 ("bcache: A block layer cache") - kernel-per-CPU-kthreads.txt was added by commit 49717cb4 ("kthread: Document ways of reducing OS jitter due to per-CPU kthreads") - phy.txt was added by commit ff764963 ("drivers: phy: add generic PHY framework") - block/null_blk was added by commit 12f8f4fc ("null_blk: documentation") - module-signing.txt was added by commit 3cafea30 ("Add Documentation/module-signing.txt file") - assoc_array.txt was added by commit 3cb98950 ("Add a generic associative array implementation.") - arm/IXP4xx was part of the initial repo - arm/cluster-pm-race-avoidance.txt was added by commit 7fe31d28 ("ARM: mcpm: introduce helpers for platform coherency exit/setup") - arm/firmware.txt was added by commit 7366b92a ("ARM: Add interface for registering and calling firmware-specific operations") - arm/kernel_mode_neon.txt was added by commit 2afd0a05 ("ARM: 7825/1: document the use of NEON in kernel mode") - arm/tcm.txt was added by commit bc581770 ("ARM: 5580/2: ARM TCM (Tightly-Coupled Memory) support v3") - arm/vlocks.txt was added by commit 9762f12d ("ARM: mcpm: Add baremetal voting mutexes") - blackfin/gptimers-example.c, Makefile was added by commit 4b60779d ("Blackfin: add an example showing how to use the gptimers API") - devicetree/usage-model.txt was added by commit 31134efc ("dt: Linux DT usage model documentation") - fb/api.txt was added by commit fb21c2f4 ("fbdev: Add FOURCC-based format configuration API") - fb/sm501.txt was added by commit e6a04980 ("video, sm501: add edid and commandline support") - fb/udlfb.txt was added by commit 96f8d864 ("fbdev: move udlfb out of staging.") - filesystems/Makefile was added by commit 1e0051ae ("Documentation/fs/: split txt and source files") - filesystems/nfs/nfsd-admin-interfaces.txt was added by commit 8a4c6e19 ("nfsd: document kernel interfaces for nfsd configuration") - ide/warm-plug-howto.txt was added by commit f74c9141 ("ide: add warm-plug support for IDE devices (take 2)") - laptops/Makefile was added by commit d49129ac ("Documentation/laptop/: split txt and source files") - leds/leds-blinkm.txt was added by commit b54cf35a ("LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS") - leds/ledtrig-oneshot.txt was added by commit 5e417281 ("leds: add oneshot trigger") - leds/ledtrig-transient.txt was added by commit 44e1e9f8 ("leds: add new transient trigger for one shot timer activation") - m68k/README.buddha was part of the initial repo - networking/LICENSE.(qla3xxx|qlcnic|qlge) was added by commits 40839129, c4e84bde, 5a4faa87 - networking/Makefile was added by commit 3794f3e8 ("docsrc: build Documentation/ sources") - networking/i40evf.txt was added by commit 105bf2fe ("i40evf: add driver to kernel build system") - networking/ipsec.txt was added by commit b3c6efbc ("xfrm: Add file to document IPsec corner case") - networking/mac80211-auth-assoc-deauth.txt was added by commit 3cd7920a ("mac80211: add auth/assoc/deauth flow diagram") - networking/netlink_mmap.txt was added by commit 5683264c ("netlink: add documentation for memory mapped I/O") - networking/nf_conntrack-sysctl.txt was added by commit c9f9e0e1 ("netfilter: doc: add nf_conntrack sysctl api documentation") lan) - networking/team.txt was added by commit 3d249d4c ("net: introduce ethernet teaming device") - networking/vxlan.txt was added by commit d342894c ("vxlan: virtual extensible lan") - power/runtime_pm.txt was added by commit 5e928f77 ("PM: Introduce core framework for run-time PM of I/O devices (rev. 17)") - power/charger-manager.txt was added by commit 3bb3dbbd ("power_supply: Add initial Charger-Manager driver") - RCU/lockdep-splat.txt was added by commit d7bd2d68 ("rcu: Document interpretation of RCU-lockdep splats") - s390/kvm.txt was added by 5ecee4ba (KVM: s390: API documentation) - s390/qeth.txt was added by commit b4d72c08 ("qeth: bridgeport support - basic control") - scheduler/sched-bwc.txt was added by commit 88ebc08e ("sched: Add documentation for bandwidth control") - scsi/advansys.txt was added by commit 4bd6d7f3 ("[SCSI] advansys: Move documentation to Documentation/scsi") - scsi/bfa.txt was added by commit 1ec90174 ("[SCSI] bfa: add readme file") - scsi/bnx2fc.txt was added by commit 12b8fc10 ("[SCSI] bnx2fc: Add driver documentation") - scsi/cxgb3i.txt was added by commit c3673464 ("[SCSI] cxgb3i: Add cxgb3i iSCSI driver.") - scsi/hpsa.txt was added by commit 992ebcf1 ("[SCSI] hpsa: Add hpsa.txt to Documentation/scsi") - scsi/link_power_management_policy.txt was added by commit ca77329f ("[libata] Link power management infrastructure") - scsi/osd.txt was added by commit 78e0c621 ("[SCSI] osd: Documentation for OSD library") - scsi/scsi-parameter.txt was created/moved by commit 163475fb ("Documentation: move SCSI parameters to their own text file") - serial/driver was part of the initial repo - serial/n_gsm.txt was added by commit 323e8412 ("n_gsm: add a documentation") - timers/Makefile was added by commit 3794f3e8 ("docsrc: build Documentation/ sources") - virt/kvm/s390.txt was added by commit d9101fca ("KVM: s390: diagnose call documentation") - vm/split_page_table_lock was added by commit 49076ec2 ("mm: dynamically allocate page->ptl if it cannot be embedded to struct page") - w1/slaves/w1_ds28e04 was added by commit fbf7f7b4 ("w1: Add 1-wire slave device driver for DS28E04-100") - w1/masters/omap-hdq was added by commit e0a29382 ("hdq: documentation for OMAP HDQ") - x86/early-microcode.txt was added by commit 0d91ea86 ("x86, doc: Documentation for early microcode loading") - x86/earlyprintk.txt was added by commit a1aade47 ("x86/doc: mini-howto for using earlyprintk=dbgp") - x86/entry_64.txt was added by commit 8b4777a4 ("x86-64: Document some of entry_64.S") - x86/pat.txt was added by commit d27554d8 ("x86: PAT documentation") Moved files - arm/kernel_user_helpers.txt was moved out of arch/arm/kernel by commit 37b83046 ("ARM: kuser: move interface documentation out of the source code") - efi-stub.txt was moved out of x86/ and down into Documentation/ in commit 4172fe2f ("EFI stub documentation updates") - laptops/hpfall.c was moved out of hwmon/ and into laptops/ in commit efcfed9b ("Move hp_accel to drivers/platform/x86") - commit 5616c23a ("x86: doc: move x86-generic documentation from Doc/x86/i386"): * x86/usb-legacy-support.txt * x86/boot.txt * x86/zero_page.txt - power/video_extension.txt was moved to acpi in commit 70e66e4d ("ACPI / video: move video_extension.txt to Documentation/acpi") Removed files (left in 00-INDEX) - memory.txt was removed by commit 00ea8990 ("memory.txt: remove stray information") - gpio.txt was moved to gpio/ in commit fd8e198c ("Documentation: gpiolib: document new interface") - networking/DLINK.txt was removed by commit 168e06ae ("drivers/net: delete old parallel port de600/de620 drivers") - serial/hayes-esp.txt was removed by commit f53a2ade ("tty: esp: remove broken driver") - s390/TAPE was removed by commit 9e280f66 ("[S390] remove tape block docu") - vm/locking was removed by commit 57ea8171 ("mm: documentation: remove hopelessly out-of-date locking doc") - laptops/acer-wmi.txt was remvoed by commit 02003667 ("acer-wmi: Delete out-of-date documentation") Typos/misc issues - rpc-server-gss.txt was added as knfsd-rpcgss.txt in commit 030d794b ("SUNRPC: Use gssproxy upcall for server RPCGSS authentication.") - commit b88cf73d ("net: add missing entries to Documentation/networking/00-INDEX") * generic-hdlc.txt was added as generic_hdlc.txt * spider_net.txt was added as spider-net.txt - w1/master/mxc-w1 was added as mxc_w1 by commit a5fd9139 ("w1: add 1-wire master driver for i.MX27 / i.MX31") - s390/zfcpdump.txt was added as zfcpdump by commit 6920c12a ("[S390] Add Documentation/s390/00-INDEX.") Signed-off-by:
Henrik Austad <henrik@austad.us> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [rcu bits] Acked-by:
Rob Landley <rob@landley.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Mark Brown <broonie@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Gleb Natapov <gleb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Len Brown <len.brown@intel.com> Cc: James Bottomley <JBottomley@parallels.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Richard Genoud authored
Since git v1.7.7, the .git directory can be a file when, for example, the kernel is a submodule of another git super project. So, the check "-d .git" is not working anymore in this case. Using a more generic check like "-e .git" corrects this behaviour. Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Richard Genoud authored
Since git v1.7.7, the .git directory can be a file when, for example, the kernel is a submodule of another git super project. So, the check "-d .git" is not working anymore in this case. Using a more generic check like "-e .git" corrects this behaviour. Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
I was reviewing this and noticed that unlocking should be conditional on the error path. I've changed it to unlock and return directly since we only do it once and it seems unlikely to change in the near future. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Dimitri Sivanich <sivanich@sgi.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 10 Feb, 2014 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull SELinux fixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: SELinux: Fix kernel BUG on empty security contexts. selinux: add SOCK_DIAG_BY_FAMILY to the list of netlink message types
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "A couple of fixes, both -stable fodder. The O_SYNC bug is fairly old..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a kmap leak in virtio_console fix O_SYNC|O_APPEND syncing the wrong range on write()
-
-
- 09 Feb, 2014 9 commits
-
-
Al Viro authored
While we are at it, don't do kmap() under kmap_atomic(), *especially* for a page we'd allocated with GFP_KERNEL. It's spelled "page_address", and had that been more than that, we'd have a real trouble - kmap_high() can block, and doing that while holding kmap_atomic() is a Bad Idea(tm). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
It actually goes back to 2004 ([PATCH] Concurrent O_SYNC write support) when sync_page_range() had been introduced; generic_file_write{,v}() correctly synced pos_after_write - written .. pos_after_write - 1 but generic_file_aio_write() synced pos_before_write .. pos_before_write + written - 1 instead. Which is not the same thing with O_APPEND, obviously. A couple of years later correct variant had been killed off when everything switched to use of generic_file_aio_write(). All users of generic_file_aio_write() are affected, and the same bug has been copied into other instances of ->aio_write(). The fix is trivial; the only subtle point is that generic_write_sync() ought to be inlined to avoid calculations useless for the majority of calls. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "This is a small collection of fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix data corruption when reading/updating compressed extents Btrfs: don't loop forever if we can't run because of the tree mod log btrfs: reserve no transaction units in btrfs_ioctl_set_features btrfs: commit transaction after setting label and features Btrfs: fix assert screwup for the pending move stuff
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Tooling fixes, mostly related to the KASLR fallout, but also other fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf buildid-cache: Check relocation when checking for existing kcore perf tools: Adjust kallsyms for relocated kernel perf tests: No need to set up ref_reloc_sym perf symbols: Prevent the use of kcore if the kernel has moved perf record: Get ref_reloc_sym from kernel map perf machine: Set up ref_reloc_sym in machine__create_kernel_maps() perf machine: Add machine__get_kallsyms_filename() perf tools: Add kallsyms__get_function_start() perf symbols: Fix symbol annotation for relocated kernel perf tools: Fix include for non x86 architectures perf tools: Fix AAAAARGH64 memory barriers perf tools: Demangle kernel and kernel module symbols too perf/doc: Remove mention of non-existent set_perf_event_pending() from design.txt
-
Filipe David Borba Manana authored
When using a mix of compressed file extents and prealloc extents, it is possible to fill a page of a file with random, garbage data from some unrelated previous use of the page, instead of a sequence of zeroes. A simple sequence of steps to get into such case, taken from the test case I made for xfstests, is: _scratch_mkfs _scratch_mount "-o compress-force=lzo" $XFS_IO_PROG -f -c "pwrite -S 0x06 -b 18670 266978 18670" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "falloc 26450 665194" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "truncate 542872" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar This results in the following file items in the fs tree: item 4 key (257 INODE_ITEM 0) itemoff 15879 itemsize 160 inode generation 6 transid 6 size 542872 block group 0 mode 100600 item 5 key (257 INODE_REF 256) itemoff 15863 itemsize 16 inode ref index 2 namelen 6 name: foobar item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53 extent data disk byte 0 nr 0 gen 6 extent data offset 0 nr 24576 ram 266240 extent compression 0 item 7 key (257 EXTENT_DATA 24576) itemoff 15757 itemsize 53 prealloc data disk byte 12849152 nr 241664 gen 6 prealloc data offset 0 nr 241664 item 8 key (257 EXTENT_DATA 266240) itemoff 15704 itemsize 53 extent data disk byte 12845056 nr 4096 gen 6 extent data offset 0 nr 20480 ram 20480 extent compression 2 item 9 key (257 EXTENT_DATA 286720) itemoff 15651 itemsize 53 prealloc data disk byte 13090816 nr 405504 gen 6 prealloc data offset 0 nr 258048 The on disk extent at offset 266240 (which corresponds to 1 single disk block), contains 5 compressed chunks of file data. Each of the first 4 compress 4096 bytes of file data, while the last one only compresses 3024 bytes of file data. Therefore a read into the file region [285648 ; 286720[ (length = 4096 - 3024 = 1072 bytes) should always return zeroes (our next extent is a prealloc one). The solution here is the compression code path to zero the remaining (untouched) bytes of the last page it uncompressed data into, as the information about how much space the file data consumes in the last page is not known in the upper layer fs/btrfs/extent_io.c:__do_readpage(). In __do_readpage we were correctly zeroing the remainder of the page but only if it corresponds to the last page of the inode and if the inode's size is not a multiple of the page size. This would cause not only returning random data on reads, but also permanently storing random data when updating parts of the region that should be zeroed. For the example above, it means updating a single byte in the region [285648 ; 286720[ would store that byte correctly but also store random data on disk. A test case for xfstests follows soon. Signed-off-by:
Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Josef Bacik authored
A user reported a 100% cpu hang with my new delayed ref code. Turns out I forgot to increase the count check when we can't run a delayed ref because of the tree mod log. If we can't run any delayed refs during this there is no point in continuing to look, and we need to break out. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
David Sterba authored
Added in patch "btrfs: add ioctls to query/change feature bits online" modifications to superblock don't need to reserve metadata blocks when starting a transaction. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <clm@fb.com>
-
Jeff Mahoney authored
The set_fslabel ioctl uses btrfs_end_transaction, which means it's possible that the change will be lost if the system crashes, same for the newly set features. Let's use btrfs_commit_transaction instead. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <clm@fb.com>
-
Josef Bacik authored
Wang noticed that he was failing btrfs/030 even though me and Filipe couldn't reproduce. Turns out this is because Wang didn't have CONFIG_BTRFS_ASSERT set, which meant that a key part of Filipe's original patch was not being built in. This appears to be a mess up with merging Filipe's patch as it does not exist in his original patch. Fix this by changing how we make sure del_waiting_dir_move asserts that it did not error and take the function out of the ifdef check. This makes btrfs/030 pass with the assert on or off. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Filipe Manana <fdmanana@gmail.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
- 08 Feb, 2014 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pinctrl fixes from Linus Walleij: "First round of pin control fixes for v3.14: - Protect pinctrl_list_add() with the proper mutex. This was identified by RedHat. Caused nasty locking warnings was rootcased by Stanislaw Gruszka. - Avoid adding dangerous debugfs files when either half of the subsystem is unused: pinmux or pinconf. - Various fixes to various drivers: locking, hardware particulars, DT parsing, error codes" * tag 'pinctrl-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: tegra: return correct error type pinctrl: do not init debugfs entries for unimplemented functionalities pinctrl: protect pinctrl_list add pinctrl: sirf: correct the pin index of ac97_pins group pinctrl: imx27: fix offset calculation in imx_read_2bit pinctrl: vt8500: Change devicetree data parsing pinctrl: imx27: fix wrong offset to ICONFB pinctrl: at91: use locked variant of irq_set_handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "Add a missing Kconfig dependency" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Generic irq chip requires IRQ_DOMAIN
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Peter Anvin: "Quite a varied little collection of fixes. Most of them are relatively small or isolated; the biggest one is Mel Gorman's fixes for TLB range flushing. A couple of AMD-related fixes (including not crashing when given an invalid microcode image) and fix a crash when compiled with gcov" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, AMD: Unify valid container checks x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y x86/efi: Allow mapping BGRT on x86-32 x86: Fix the initialization of physnode_map x86, cpu hotplug: Fix stack frame warning in check_irq_vectors_for_cpu_disable() x86/intel/mid: Fix X86_INTEL_MID dependencies arch/x86/mm/srat: Skip NUMA_NO_NODE while parsing SLIT mm, x86: Revisit tlb_flushall_shift tuning for page flushes except on IvyBridge x86: mm: change tlb_flushall_shift for IvyBridge x86/mm: Eliminate redundant page table walk during TLB range flushing x86/mm: Clean up inconsistencies when flushing TLB ranges mm, x86: Account for TLB flushes only when debugging x86/AMD/NB: Fix amd_set_subcaches() parameter type x86/quirks: Add workaround for AMD F16h Erratum792 x86, doc, kconfig: Fix dud URL for Microcode data
-
git://github.com/kleikamp/linux-shaggyLinus Torvalds authored
Pull jfs fix from David Kleikamp: "Fix regression" * tag 'jfs-3.14-rc2' of git://github.com/kleikamp/linux-shaggy: jfs: fix generic posix ACL regression
-
Dave Kleikamp authored
I missed a couple errors in reviewing the patches converting jfs to use the generic posix ACL function. Setting ACL's currently fails with -EOPNOTSUPP. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Reported-by:
Michael L. Semon <mlsemon35@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de>
-
Richard Weinberger authored
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `dw_wdt_drv_probe': drivers/watchdog/dw_wdt.c:302: undefined reference to `devm_ioremap_resource' Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
- 07 Feb, 2014 2 commits
-
-
Linus Torvalds authored
Merge tag 'driver-core-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single kernfs fix to resolve a much-reported lockdep issue with the removal of entries in sysfs" * tag 'driver-core-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: make kernfs_deactivate() honor KERNFS_LOCKDEP flag
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull ceph fixes from Sage Weil: "There is an RBD fix for a crash due to the immutable bio changes, an error path fix, and a locking fix in the recent redirect support" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: do not dereference a NULL bio pointer libceph: take map_sem for read in handle_reply() libceph: factor out logic from ceph_osdc_start_request() libceph: fix error handling in ceph_osdc_init()
-