- 04 Mar, 2014 9 commits
-
-
Mauro Carvalho Chehab authored
Make checkpatch.pl happy. Acked-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
There were some DVB internal API changes, since this driver were written. Change it to work with the new API. Acked-by:
-
Mauro Carvalho Chehab authored
Do the automatic CodingStyle fixes found at Lindent. No functional changes. Acked-by:
-
Devin Heitmueller authored
Relicense the drx-j driver under a standard 3-clause BSD license, which makes it GPL compatible. This was done explicitly with permission from Trident Microsystems. Signed-off-by:
-
Devin Heitmueller authored
Add support for the Trident DRX-J driver, including a card profile for the PCTV 80e which uses the chip. Thanks to Trident for allowing the release of this code under a BSD license, and of course Hauppauge/PCTV for pushing for its release to the community. [pdickeybeta@gmail.com: modified to fix compilation errors and also to move the driver files from the drx39xy subdirectory to the frontends directory] [m.chehab@samsung.com: fix merge conflicts, commented drx-j compilation and added EM28XX_R06_I2C_CLK setup also to the board setup] Signed-off-by:
-
Mauro Carvalho Chehab authored
Those ioctls were added back in 2009, at changeset 1cb662a3 but were never documented. Fortunately, the original commit is good enough to serve as the basis for documenting it. Also, the support for it is done by dmxdev implementation. So, add a proper documentation for it, based on the description of the original changeset. Signed-off-by:
-
Mauro Carvalho Chehab authored
If an attempt to set LNA fails, restore the cache to LNA_AUTO, in order to make it to reflect the current LNA status. Signed-off-by: -
Mauro Carvalho Chehab authored
That helps to understand what's going there. Signed-off-by: -
Mauro Carvalho Chehab authored
Several URBs will be simply not filled. Don't call the DVB core software filter for those empty URBs. Signed-off-by:
-
- 03 Mar, 2014 6 commits
-
-
Shuah Khan authored
Implement em28xx_usb_driver suspend, resume, and reset_resume hooks. These hooks will invoke em28xx core em28xx_suspend_extension() and em28xx_resume_extension() to suspend and resume registered extensions. Approach: Add power management support to em28xx usb driver. This driver works in conjunction with extensions for each of the functions on the USB device for video/audio/dvb/remote functionality that is present on media USB devices it supports. During suspend and resume each of these extensions will have to do their part in suspending the components they control. Adding suspend and resume hooks to the existing struct em28xx_ops will enable the extensions the ability to implement suspend and resume hooks to be called from em28xx driver. The overall approach is as follows: -- add suspend and resume hooks to em28xx_ops -- add suspend and resume routines to em28xx-core to invoke suspend and resume hooks for all registered extensions. -- change em28xx dvb, audio, input, and video extensions to implement em28xx_ops: suspend and resume hooks. These hooks do what is necessary to suspend and resume the devices they control. Signed-off-by:
Shuah Khan <shuah.kh@samsung.com> Signed-off-by:
-
Shuah Khan authored
Implement em28xx_ops: suspend/resume hooks. em28xx usb driver will invoke em28xx_ops: suspend and resume hooks for all its extensions from its suspend() and resume() interfaces. Signed-off-by:
-
Shuah Khan authored
Implement em28xx_ops: suspend/resume hooks. em28xx usb driver will invoke em28xx_ops: suspend and resume hooks for all its extensions from its suspend() and resume() interfaces. [m.chehab@samsung.com: Fix a breakage caused by calling a non-existing function call: schedule_delayed_work_sync(), and test if IR was defined at suspend/resume] Signed-off-by:
-
Shuah Khan authored
Implement em28xx_ops: suspend/resume hooks. em28xx usb driver will invoke em28xx_ops: suspend and resume hooks for all its extensions from its suspend() and resume() interfaces. Signed-off-by:
-
Shuah Khan authored
Implement em28xx_ops: suspend/resume hooks. em28xx usb driver will invoke em28xx_ops: suspend and resume hooks for all its extensions from its suspend() and resume() interfaces. Signed-off-by:
-
Shuah Khan authored
em28xx usb driver will have to suspend and resume its extensions. Adding suspend and resume to em28xx_ops gives extensions the ability to install suspend and resume that can be invoked from em28xx_usb driver suspend() and resume() interfaces. Approach: Add power management support to em28xx usb driver. This driver works in conjunction with extensions for each of the functions on the USB device for video/audio/dvb/remote functionality that is present on media USB devices it supports. During suspend and resume each of these extensions will have to do their part in suspending the components they control. Adding suspend and resume hooks to the existing struct em28xx_ops will enable the extensions the ability to implement suspend and resume hooks to be called from em28xx driver. The overall approach is as follows: -- add suspend and resume hooks to em28xx_ops -- add suspend and resume routines to em28xx-core to invoke suspend and resume hooks for all registered extensions. -- change em28xx dvb, audio, input, and video extensions to implement em28xx_ops: suspend and resume hooks. These hooks do what is necessary to suspend and resume the devices they control. Signed-off-by:
-
- 28 Feb, 2014 25 commits
-
-
Devin Heitmueller authored
Restructure the way we bring the various GPIOs out of reset. In particular: 1. we only need to setup the GPIOs as outputs once 2. there's no point in writing 0x40 to register 0x00 since that's the EEPROM write protect and already it's configured as an input 3. Separate out the act of enabling the power supply and bringing the tuner and demod out of reset. If you don't then the chip may not be properly enabled (as the power supply is still ramping up when the chip comes out of reset). This can result in probing failures. Signed-off-by:Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Heinrich Schuchardt authored
An attempt was made to read dvbs2_snr_tab[80], though dvbs2_snr_tab has only 80 elements. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
-
Alexander Shiyan authored
We are checking sizeof() the wrong variable! Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
-
Dan Carpenter authored
No need to check lock twice here. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Malcolm Priestley authored
Add m88rs2000_get_tune_settings, min delay of 2000 ms on symbol rate more than 3000000 and delay of 3000ms less than this. Adding min delay prevents crashing the frontend on continuous transponder scans. Other dvb_frontend_tune_settings remain as default. This makes very little time difference to good channel scans, but slows down the set frontend where lock can never be achieved i.e. DVB-S2. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Malcolm Priestley authored
The m88rs2000 frontend is always auto inversion. Signed-off-by:
-
Amit Grover authored
This patch adds Controls to set Horizontal and Vertical search range for Motion Estimation block for Samsung MFC video Encoders. Signed-off-by:
Swami Nathan <swaminath.p@samsung.com> Signed-off-by:
Amit Grover <amit.grover@samsung.com> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Amit Grover authored
Adding V4L2 controls for horizontal and vertical search range in pixels for motion estimation module in video encoder. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Jan Vcelak authored
Signed-off-by:
Jan Vcelak <jv@fcelda.cz> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Jan Vcelak authored
0458:707f KYE Systems Corp. (Mouse Systems) TVGo DVB-T03 [RTL2832] The USB dongle uses RTL2832U demodulator and FC0012 tuner. Signed-off-by:
-
Hans de Goede authored
Reported-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Dan Carpenter authored
"err" is zero here so we don't need to check again. Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Antonio Ospite authored
Messages relative to kinect_read() are printing "res" which contains the return value of a previous kinect_write(). Print the correct value in the messages. Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Antonio Ospite <ospite@studenti.unina.it> Signed-off-by:
-
Antonio Ospite authored
The error checking code relative to the invocations of kinect_read() does not return the actual return code of the function just called, it returns "res" which still contains the value of the last invocation of a previous kinect_write(). Return the proper value, and while at it also report with -EREMOTEIO the case of a partial transfer. Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
sensoray-dev authored
Upgrade to videobuf2 libraries. No errors reported with "v4l2-compliance -s". Signed-off-by:
Dean Anderson <linux-dev@sensoray.com> Signed-off-by:
-
Arnd Bergmann authored
sleep_on and its variants are broken and going away soon. This changes the omap vout driver to use wait_event_interruptible_timeout instead, which fixes potential race where the dma is complete before we schedule. [hans.verkuil@cisco.com: replaced interruptible_sleep_on_timeout by wait_event_interruptible_timeout in the commit msg, obvious typo] Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: linux-media@vger.kernel.org Signed-off-by:
-
Hans Verkuil authored
interruptible_sleep_on is racy and going away. This replaces one use in the radio-cadet driver with a wait_event_interruptible call. Special care was taken that accesses to the rdsin and rdsout indices are always done with dev->lock held. Signed-off-by:
-
Martin Bugge authored
Closer inspection on exact transmitted format showed that we needed to add 1 on vertical sync. Acked-by:
Martin Bugge <marbugge@cisco.com> Signed-off-by:
-
Martin Bugge authored
HS_IN/VS_IN was always set to positive. Acked-by:
-
Martin Bugge authored
Currently only RGB444 input data is supported so set to zero. Acked-by:
-
Dean Anderson authored
Removal of unnecessary parameters from s2255_fh. Signed-off-by:
-
Dean Anderson authored
Start acquisition return code was not being checked. Return error if start acquisition fails. Signed-off-by:
-
Dean Anderson authored
Driver was allocating a kernel buffer each time it was sending a command. It is better to allocate this buffer once at startup. Signed-off-by:
-
Dean Anderson authored
Removing duplicate fmt from buffer structure. Signed-off-by:
-
