1. 20 Oct, 2016 3 commits
    • Heiko Carstens's avatar
      sched/core, x86: Make struct thread_info arch specific again · c8061485
      Heiko Carstens authored
      The following commit:
      
        c65eacbe ("sched/core: Allow putting thread_info into task_struct")
      
      ... made 'struct thread_info' a generic struct with only a
      single ::flags member, if CONFIG_THREAD_INFO_IN_TASK_STRUCT=y is
      selected.
      
      This change however seems to be quite x86 centric, since at least the
      generic preemption code (asm-generic/preempt.h) assumes that struct
      thread_info also has a preempt_count member, which apparently was not
      true for x86.
      
      We could add a bit more #ifdefs to solve this problem too, but it seems
      to be much simpler to make struct thread_info arch specific
      again. This also makes the conversion to THREAD_INFO_IN_TASK_STRUCT a
      bit easier for architectures that have a couple of arch specific stuff
      in their thread_info definition.
      
      The arch specific stuff _could_ be moved to thread_struct. However
      keeping them in thread_info makes it easier: accessing thread_info
      members is simple, since it is at the beginning of the task_struct,
      while the thread_struct is at the end. At least on s390 the offsets
      needed to access members of the thread_struct (with task_struct as
      base) are too large for various asm instructions.  This is not a
      problem when keeping these members within thread_info.
      Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
      Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
      Acked-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: keescook@chromium.org
      Cc: linux-arch@vger.kernel.org
      Link: http://lkml.kernel.org/r/1476901693-8492-2-git-send-email-mark.rutland@arm.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      c8061485
    • Dmitry Safonov's avatar
      x86/signal: Remove bogus user_64bit_mode() check from sigaction_compat_abi() · ed1e7db3
      Dmitry Safonov authored
      The recent introduction of SA_X32/IA32 sa_flags added a check for
      user_64bit_mode() into sigaction_compat_abi(). user_64bit_mode() is true
      for native 64-bit processes and x32 processes.
      
      Due to that the function returns w/o setting the SA_X32_ABI flag for X32
      processes. In consequence the kernel attempts to deliver the signal to the
      X32 process in native 64-bit mode causing the process to segfault.
      
      Remove the check, so the actual check for X32 mode which sets the ABI flag
      can be reached. There is no side effect for native 64-bit mode.
      
      [ tglx: Rewrote changelog ]
      
      Fixes: 68463510 ("x86/signal: Add SA_{X32,IA32}_ABI sa_flags")
      Reported-by: default avatarMikulas Patocka <mpatocka@redhat.com>
      Tested-by: default avatarAdam Borowski <kilobyte@angband.pl>
      Signed-off-by: default avatarDmitry Safonov <0x7f454c46@gmail.com>
      Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Cc: linux-mm@kvack.org
      Cc: Cyrill Gorcunov <gorcunov@openvz.org>
      Cc: Pavel Emelyanov <xemul@virtuozzo.com>
      Link: http://lkml.kernel.org/r/CAJwJo6Z8ZWPqNfT6t-i8GW1MKxQrKDUagQqnZ%2B0%2B697%3DMyVeGg@mail.gmail.comSigned-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      ed1e7db3
    • Alex Thorlton's avatar
      x86/platform/UV: Fix support for EFI_OLD_MEMMAP after BIOS callback updates · caef78b6
      Alex Thorlton authored
      Some time ago, we brought our UV BIOS callback code up to speed with the
      new EFI memory mapping scheme, in commit:
      
          d1be84a2 ("x86/uv: Update uv_bios_call() to use efi_call_virt_pointer()")
      
      By leveraging some changes that I made to a few of the EFI runtime
      callback mechanisms, in commit:
      
          80e75596 ("efi: Convert efi_call_virt() to efi_call_virt_pointer()")
      
      This got everything running smoothly on UV, with the new EFI mapping
      code.  However, this left one, small loose end, in that EFI_OLD_MEMMAP
      (a.k.a. efi=old_map) will no longer work on UV, on kernels that include
      the aforementioned changes.
      
      At the time this was not a major issue (in fact, it still really isn't),
      but there's no reason that EFI_OLD_MEMMAP *shouldn't* work on our
      systems.  This commit adds a check into uv_bios_call(), to see if we have
      the EFI_OLD_MEMMAP bit set in efi.flags.  If it is set, we fall back to
      using our old callback method, which uses efi_call() directly on the __va()
      of our function pointer.
      Signed-off-by: default avatarAlex Thorlton <athorlton@sgi.com>
      Acked-by: default avatarMatt Fleming <matt@codeblueprint.co.uk>
      Cc: <stable@vger.kernel.org> # v4.7 and later
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: Dimitri Sivanich <sivanich@sgi.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
      Cc: Mike Travis <travis@sgi.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Russ Anderson <rja@sgi.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-efi@vger.kernel.org
      Link: http://lkml.kernel.org/r/1476928131-170101-1-git-send-email-athorlton@sgi.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      caef78b6
  2. 19 Oct, 2016 2 commits
  3. 18 Oct, 2016 12 commits
  4. 17 Oct, 2016 13 commits
  5. 16 Oct, 2016 9 commits
    • Dave Airlie's avatar
      Merge branch 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux into drm-next · bc91657e
      Dave Airlie authored
      Fixes for radeon and amdgpu for 4.9:
      - allow an additional reg in the SI reg checker
      - fix thermal sensor readback on CZ/ST
      - misc bug fixes
      
      * 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
        drm/amd/powerplay: fix bug stop dpm can't work on Vi.
        drm/amd/powerplay: notify smu no display by default.
        drm/amdgpu/dpm: implement thermal sensor for CZ/ST
        drm/amdgpu/powerplay: implement thermal sensor for CZ/ST
        drm/amdgpu: disable smu hw first on tear down
        drm/amdgpu: fix amdgpu_need_full_reset (v2)
        drm/amdgpu/si_dpm: Limit clocks on HD86xx part
        drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
        drm/amdgpu: potential NULL dereference in debugfs code
        drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
        drm/amd/powerplay: fix static checker warnings in iceland_smc.c
        drm/radeon: change vblank_time's calculation method to reduce computational error.
        drm/amdgpu: change vblank_time's calculation method to reduce computational error.
        drm/amdgpu: clarify UVD/VCE special handling for CG
        drm/amd/amdgpu: enable clockgating only after late init
        drm/radeon: allow TA_CS_BC_BASE_ADDR on SI
        drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init
        drm/amdgpu/gfx8: fix CGCG_CGLS handling
        drm/radeon: fix modeset tear down code
        drm/radeon: fix up dp aux tear down (v2)
        ...
      bc91657e
    • Dan Carpenter's avatar
      perf/x86/intel: Remove an inconsistent NULL check · 5c38181c
      Dan Carpenter authored
      Smatch complains that we don't check "event->ctx" consistently.  It's
      never NULL so we can just remove the check.
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: David Carrillo-Cisneros <davidcc@google.com>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Kan Liang <kan.liang@intel.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Stephane Eranian <eranian@google.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Vince Weaver <vincent.weaver@maine.edu>
      Cc: kernel-janitors@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      5c38181c
    • Ingo Molnar's avatar
      1d33369d
    • Dan Williams's avatar
      x86/e820: Don't merge consecutive E820_PRAM ranges · 23446cb6
      Dan Williams authored
      Commit:
      
        917db484 ("x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation")
      
      ... fixed up the broken manipulations of max_pfn in the presence of
      E820_PRAM ranges.
      
      However, it also broke the sanitize_e820_map() support for not merging
      E820_PRAM ranges.
      
      Re-introduce the enabling to keep resource boundaries between
      consecutive defined ranges. Otherwise, for example, an environment that
      boots with memmap=2G!8G,2G!10G will end up with a single 4G /dev/pmem0
      device instead of a /dev/pmem0 and /dev/pmem1 device 2G in size.
      Reported-by: default avatarDave Chinner <david@fromorbit.com>
      Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
      Cc: <stable@vger.kernel.org>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Jeff Moyer <jmoyer@redhat.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Zhang Yi <yizhan@redhat.com>
      Cc: linux-nvdimm@lists.01.org
      Fixes: 917db484 ("x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation")
      Link: http://lkml.kernel.org/r/147629530854.10618.10383744751594021268.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      23446cb6
    • Joonas Lahtinen's avatar
      cpu/hotplug: Use distinct name for cpu_hotplug.dep_map · a705e07b
      Joonas Lahtinen authored
      Use distinctive name for cpu_hotplug.dep_map to avoid the actual
      cpu_hotplug.lock appearing as cpu_hotplug.lock#2 in lockdep splats.
      Signed-off-by: default avatarJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Reviewed-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Acked-by: default avatarGautham R. Shenoy <ego@linux.vnet.ibm.com>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Cc: Gautham R . Shenoy <ego@linux.vnet.ibm.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: intel-gfx@lists.freedesktop.org
      Cc: trivial@kernel.org
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      a705e07b
    • Dmitry Vyukov's avatar
      kprobes: Unpoison stack in jprobe_return() for KASAN · 9f7d416c
      Dmitry Vyukov authored
      I observed false KSAN positives in the sctp code, when
      sctp uses jprobe_return() in jsctp_sf_eat_sack().
      
      The stray 0xf4 in shadow memory are stack redzones:
      
      [     ] ==================================================================
      [     ] BUG: KASAN: stack-out-of-bounds in memcmp+0xe9/0x150 at addr ffff88005e48f480
      [     ] Read of size 1 by task syz-executor/18535
      [     ] page:ffffea00017923c0 count:0 mapcount:0 mapping:          (null) index:0x0
      [     ] flags: 0x1fffc0000000000()
      [     ] page dumped because: kasan: bad access detected
      [     ] CPU: 1 PID: 18535 Comm: syz-executor Not tainted 4.8.0+ #28
      [     ] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      [     ]  ffff88005e48f2d0 ffffffff82d2b849 ffffffff0bc91e90 fffffbfff10971e8
      [     ]  ffffed000bc91e90 ffffed000bc91e90 0000000000000001 0000000000000000
      [     ]  ffff88005e48f480 ffff88005e48f350 ffffffff817d3169 ffff88005e48f370
      [     ] Call Trace:
      [     ]  [<ffffffff82d2b849>] dump_stack+0x12e/0x185
      [     ]  [<ffffffff817d3169>] kasan_report+0x489/0x4b0
      [     ]  [<ffffffff817d31a9>] __asan_report_load1_noabort+0x19/0x20
      [     ]  [<ffffffff82d49529>] memcmp+0xe9/0x150
      [     ]  [<ffffffff82df7486>] depot_save_stack+0x176/0x5c0
      [     ]  [<ffffffff817d2031>] save_stack+0xb1/0xd0
      [     ]  [<ffffffff817d27f2>] kasan_slab_free+0x72/0xc0
      [     ]  [<ffffffff817d05b8>] kfree+0xc8/0x2a0
      [     ]  [<ffffffff85b03f19>] skb_free_head+0x79/0xb0
      [     ]  [<ffffffff85b0900a>] skb_release_data+0x37a/0x420
      [     ]  [<ffffffff85b090ff>] skb_release_all+0x4f/0x60
      [     ]  [<ffffffff85b11348>] consume_skb+0x138/0x370
      [     ]  [<ffffffff8676ad7b>] sctp_chunk_put+0xcb/0x180
      [     ]  [<ffffffff8676ae88>] sctp_chunk_free+0x58/0x70
      [     ]  [<ffffffff8677fa5f>] sctp_inq_pop+0x68f/0xef0
      [     ]  [<ffffffff8675ee36>] sctp_assoc_bh_rcv+0xd6/0x4b0
      [     ]  [<ffffffff8677f2c1>] sctp_inq_push+0x131/0x190
      [     ]  [<ffffffff867bad69>] sctp_backlog_rcv+0xe9/0xa20
      [ ... ]
      [     ] Memory state around the buggy address:
      [     ]  ffff88005e48f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [     ]  ffff88005e48f400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [     ] >ffff88005e48f480: f4 f4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [     ]                    ^
      [     ]  ffff88005e48f500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [     ]  ffff88005e48f580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [     ] ==================================================================
      
      KASAN stack instrumentation poisons stack redzones on function entry
      and unpoisons them on function exit. If a function exits abnormally
      (e.g. with a longjmp like jprobe_return()), stack redzones are left
      poisoned. Later this leads to random KASAN false reports.
      
      Unpoison stack redzones in the frames we are going to jump over
      before doing actual longjmp in jprobe_return().
      Signed-off-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Acked-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
      Reviewed-by: default avatarMark Rutland <mark.rutland@arm.com>
      Cc: Mark Rutland <mark.rutland@arm.com>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
      Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Cc: Alexander Potapenko <glider@google.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
      Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Masami Hiramatsu <mhiramat@kernel.org>
      Cc: kasan-dev@googlegroups.com
      Cc: surovegin@google.com
      Cc: rostedt@goodmis.org
      Link: http://lkml.kernel.org/r/1476454043-101898-1-git-send-email-dvyukov@google.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      9f7d416c
    • Dmitry Vyukov's avatar
      kprobes: Avoid false KASAN reports during stack copy · 9254139a
      Dmitry Vyukov authored
      Kprobes save and restore raw stack chunks with memcpy().
      With KASAN these chunks can contain poisoned stack redzones,
      as the result memcpy() interceptor produces false
      stack out-of-bounds reports.
      
      Use __memcpy() instead of memcpy() for stack copying.
      __memcpy() is not instrumented by KASAN and does not lead
      to the false reports.
      
      Currently there is a spew of KASAN reports during boot
      if CONFIG_KPROBES_SANITY_TEST is enabled:
      
      [   ] Kprobe smoke test: started
      [   ] ==================================================================
      [   ] BUG: KASAN: stack-out-of-bounds in setjmp_pre_handler+0x17c/0x280 at addr ffff88085259fba8
      [   ] Read of size 64 by task swapper/0/1
      [   ] page:ffffea00214967c0 count:0 mapcount:0 mapping:          (null) index:0x0
      [   ] flags: 0x2fffff80000000()
      [   ] page dumped because: kasan: bad access detected
      [...]
      Reported-by: default avatarCAI Qian <caiqian@redhat.com>
      Tested-by: default avatarCAI Qian <caiqian@redhat.com>
      Signed-off-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Acked-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
      Cc: Alexander Potapenko <glider@google.com>
      Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
      Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: kasan-dev@googlegroups.com
      [ Improved various details. ]
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      9254139a
    • Josh Poimboeuf's avatar
      objtool: Skip all "unreachable instruction" warnings for gcov kernels · 9cfffb11
      Josh Poimboeuf authored
      Recently objtool has started reporting a few "unreachable instruction"
      warnings when CONFIG_GCOV is enabled for newer versions of GCC.  Usually
      this warning means there's some new control flow that objtool doesn't
      understand.  But in this case, objtool is correct and the instructions
      really are inaccessible.  It's an annoying quirk of gcov, but it's
      harmless, so it's ok to just silence the warnings.
      
      With older versions of GCC, it was relatively easy to detect
      gcov-specific instructions and to skip any unreachable warnings produced
      by them.  But GCC 6 has gotten craftier.
      
      Instead of continuing to play whack-a-mole with gcov, just use a bigger,
      more permanent hammer and disable unreachable warnings for the whole
      file when gcov is enabled.  This is fine to do because a) unreachable
      warnings are usually of questionable value; and b) gcov isn't used for
      production kernels and we can relax the checks a bit there.
      Reported-by: default avatarkbuild test robot <fengguang.wu@intel.com>
      Signed-off-by: default avatarJosh Poimboeuf <jpoimboe@redhat.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Link: http://lkml.kernel.org/r/38d5c87d61d9cd46486dd2c86f46603dff0df86f.1476393584.git.jpoimboe@redhat.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      9cfffb11
    • Josh Poimboeuf's avatar
      objtool: Improve rare switch jump table pattern detection · 3732710f
      Josh Poimboeuf authored
      GCC 6 added a new switch statement jump table optimization which makes
      objtool's life harder.  It looks like:
      
        mov [rodata addr],%reg1
        ... some instructions ...
        jmpq *(%reg1,%reg2,8)
      
      The optimization is quite rare, but objtool still needs to be able to
      identify the pattern so that it can follow all possible control flow
      paths related to the switch statement.
      
      In order to detect the pattern, objtool starts from the indirect jump
      and scans backwards through the function until it finds the first
      instruction in the pattern.  If it encounters an unconditional jump
      along the way, it stops and considers the pattern to be not found.
      
      As it turns out, unconditional jumps can happen, as long as they are
      small forward jumps within the range being scanned.
      
      This fixes the following warnings:
      
        drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x2f4: sibling call from callable instruction with changed frame pointer
        drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0x10f: sibling call from callable instruction with changed frame pointer
      Reported-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarJosh Poimboeuf <jpoimboe@redhat.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Link: http://lkml.kernel.org/r/8a9ed68ae1780e8d3963e4ee13f2f257fe3a3c33.1476393584.git.jpoimboe@redhat.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      3732710f
  6. 15 Oct, 2016 1 commit