The PHY PFM register is in PHY page 0x0a44 register 0x11, not 0x14.
Signed-off-by: Chunhao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The register for setting D3code PFM mode is  MISC_1, not DLLPR.
Signed-off-by: Chunhao Lin <hau@realtek.com>
Reviewed-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since 79c441ae ("ppp: implement x-netns support"), the PPP layer
calls skb_scrub_packet() whenever the skb is received on the PPP
device. Manually resetting packet meta-data in the L2TP layer is thus
redundant.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sergei Shtylyov says:

====================
sh_eth: remove unused BE descriptor support

   Here's a set of 2 patches against DaveM's 'net-next.git' repo plus the
recently merged to 'net.git' repo fix for the 16-bit descriptor endianness.
We get rid of ~30 LoCs and ~300 bytes of code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that {cpu|edmac}_to_{edmac|cpu}() functions boiled down to the mere
{cpu|le32}_to_{le32|cpu}() calls, there's no need for these functions
anymore, so just get rid of them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit  71557a37 ("[netdrvr] sh_eth: Add SH7619 support") added support
for the big-endian EDMAC descriptors. However, it was never used and never
worked right until the recent driver  fixes. I think we now  can just remove
this support,  it was only burdening the driver from the start. It should be
easy to do without disturbing the SH platform code, at least for now...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use to_delayed_work() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Support combined and rx/tx channels.

The bnxt hardware uses a completion ring for rx and tx events.  The driver
has to process the completion ring entries sequentially for the events.
The current code only supports an rx/tx ring pair for each completion ring.
This patch series add support for using a dedicated completion ring for
rx only or tx only as an option configuarble using ethtool -L.

The benefits for using dedicated completion rings are:

1. A burst of rx packets can cause delay in processing tx events if the
completion ring is shared.  If tx queue is stopped by BQL, this can cause
delay in re-starting the tx queue.

2. A completion ring is sized according to the rx and tx ring size rounded
up to the nearest power of 2.  When the completion ring is shared, it is
sized by adding the rx and tx ring sizes and then rounded to the next power
of 2, often with a lot of wasted space.

3. Using dedicated completion ring, we can adjust the tx and rx coalescing
parameters independently for rx and tx.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver can support either all combined or all rx/tx rings.  The
default is combined, but the user can now select rx/tx rings.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modify ring memory allocation and MSIX setup to support shared or
non shared rings and do the proper mapping.  Default is still to
use shared rings.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add logic to calculate how many shared or non shared rings can be
supported.  Default is to use shared rings.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to support dedicated or shared completion rings, the ring
indexing and mapping are re-structured as below:

1. bp->grp_info[] array index is 1:1 with bp->bnapi[] array index and
completion ring index.

2. rx rings 0 to n will be mapped to completion rings 0 to n.

3. If tx and rx rings share completion rings, then tx rings 0 to m will
be mapped to completion rings 0 to m.

4. If tx and rx rings use dedicated completion rings, then tx rings 0 to
m will be mapped to completion rings n + 1 to n + m.

5. Each tx or rx ring will use the corresponding completion ring index
for doorbell mapping and MSIX mapping.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each bnxt_napi structure may no longer be having both an rx ring and
a tx ring.  Check for a valid ring before using it.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, an rx and a tx ring are always paired with a completion ring.
We want to restructure it so that it is possible to have a dedicated
completion ring for tx or rx only.

The bnxt hardware uses a completion ring for rx and tx events.  The driver
has to process the completion ring entries sequentially for the rx and tx
events.  Using a dedicated completion ring for rx only or tx only has these
benefits:

1. A burst of rx packets can cause delay in processing tx events if the
completion ring is shared.  If tx queue is stopped by BQL, this can cause
delay in re-starting the tx queue.

2. A completion ring is sized according to the rx and tx ring size rounded
up to the nearest power of 2.  When the completion ring is shared, it is
sized by adding the rx and tx ring sizes and then rounded to the next power
of 2, often with a lot of wasted space.

3. Using dedicated completion ring, we can adjust the tx and rx coalescing
parameters independently for rx and tx.

The first step is to separate the rx and tx ring structures from the
bnxt_napi struct.

In this patch, an rx ring and a tx ring will point to the same bnxt_napi
struct to share the same completion ring.  No change in ring assignment
and mapping yet.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

By adding 3 separate functions to dump the different ring states.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull PCI bugfix from Bjorn Helgaas:
 "Here's another fix for v4.4.

  This fixes 32-bit config reads for the HiSilicon driver.  Obviously
  the driver is completely broken without this fix (apparently it
  actually was tested internally, but got broken somehow in the process
  of upstreaming it).

  Summary:

  HiSilicon host bridge driver
    Fix 32-bit config reads (Dongdong Liu)"

* tag 'pci-v4.4-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: hisi: Fix hisi_pcie_cfg_read() 32-bit reads

Pull sparc fixes from David Miller:
 "Just some missing syscall wire ups"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Wire up mlock2 system call.
  sparc: Add all necessary direct socket system calls.

Pull networking fixes from David Miller:

 1) Prevent XFRM per-cpu counter updates for one namespace from being
    applied to another namespace.  Fix from DanS treetman.

 2) Fix RCU de-reference in iwl_mvm_get_key_sta_id(), from Johannes
    Berg.

 3) Remove ethernet header assumption in nft_do_chain_netdev(), from
    Pablo Neira Ayuso.

 4) Fix cpsw PHY ident with multiple slaves and fixed-phy, from Pascal
    Speck.

 5) Fix use after free in sixpack_close and mkiss_close.

 6) Fix VXLAN fw assertion on bnx2x, from Yuval Mintz.

 7) natsemi doesn't check for DMA mapping errors, from Alexey
    Khoroshilov.

 8) Fix inverted test in ip6addrlbl_get(), from ANdrey Ryabinin.

 9) Missing initialization of needed_headroom in geneve tunnel driver,
    from Paolo Abeni.

10) Fix conntrack template leak in openvswitch, from Joe Stringer.

11) Mission initialization of wq->flags in sock_alloc_inode(), from
    Nicolai Stange.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close
  net, socket, socket_wq: fix missing initialization of flags
  drivers: net: cpsw: fix error return code
  openvswitch: Fix template leak in error cases.
  sctp: label accepted/peeled off sockets
  sctp: use GFP_USER for user-controlled kmalloc
  qlcnic: fix a loop exit condition better
  net: cdc_ncm: avoid changing RX/TX buffers on MTU changes
  geneve: initialize needed_headroom
  ipv6: honor ifindex in case we receive ll addresses in router advertisements
  addrconf: always initialize sysctl table data
  ipv6/addrlabel: fix ip6addrlbl_get()
  switchdev: bridge: Pass ageing time as clock_t instead of jiffies
  sh_eth: fix 16-bit descriptor field access endianness too
  veth: don’t modify ip_summed; doing so treats packets with bad checksums as good.
  net: usb: cdc_ncm: Adding Dell DW5813 LTE AT&T Mobile Broadband Card
  net: usb: cdc_ncm: Adding Dell DW5812 LTE Verizon Mobile Broadband Card
  natsemi: add checks for dma mapping errors
  rhashtable: Kill harmless RCU warning in rhashtable_walk_init
  openvswitch: correct encoding of set tunnel action attributes
  ...

Signed-off-by: David S. Miller <davem@davemloft.net>

The GLIBC folks would like to eliminate socketcall support
eventually, and this makes sense regardless so wire them
all up.
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-12-31

Here's (probably) the last bluetooth-next pull request for the 4.5
kernel:

 - Add support for BCM2E65 ACPI ID
 - Minor fixes/cleanups in the bcm203x & bfusb drivers
 - Minor debugfs related fix in 6lowpan code

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
Ethtool support for phy stats

This patchset add ethtool support for reading statistics from the PHY.
The Marvell and Micrel Phys are then extended to report receiver
packet errors and idle errors.

v2:
  Fix linking when phylib is not enabled.
v3:
  Inline helpers into ethtool.c, so fixing when phylib is a module.
v4:
  Add missing static
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The PHY counters receiver errors and errors while idle.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PHY counters receiver errors and errors while idle.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ethernet PHYs can maintain statistics, for example errors while idle
and receive errors. Add an ethtool mechanism to retrieve these
statistics, using the same model as MAC statistics.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In sctp_close, sctp_make_abort_user may return NULL because of memory
allocation failure. If this happens, it will bypass any state change
and never free the assoc. The assoc has no chance to be freed and it
will be kept in memory with the state it had even after the socket is
closed by sctp_close().

So if sctp_make_abort_user fails to allocate memory, we should abort
the asoc via sctp_primitive_ABORT as well. Just like the annotation in
sctp_sf_cookie_wait_prm_abort and sctp_sf_do_9_1_prm_abort said,
"Even if we can't send the ABORT due to low memory delete the TCB.
This is a departure from our typical NOMEM handling".

But then the chunk is NULL (low memory) and the SCTP_CMD_REPLY cmd would
dereference the chunk pointer, and system crash. So we should add
SCTP_CMD_REPLY cmd only when the chunk is not NULL, just like other
places where it adds SCTP_CMD_REPLY cmd.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2015-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
iwlwifi

* don't load firmware that won't exist for 7260
* fix RCU splat
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ceb5d58b ("net: fix sock_wake_async() rcu protection") from
the current 4.4 release cycle introduced a new flags member in
struct socket_wq and moved SOCKWQ_ASYNC_NOSPACE and SOCKWQ_ASYNC_WAITDATA
from struct socket's flags member into that new place.

Unfortunately, the new flags field is never initialized properly, at least
not for the struct socket_wq instance created in sock_alloc_inode().

One particular issue I encountered because of this is that my GNU Emacs
failed to draw anything on my desktop -- i.e. what I got is a transparent
window, including the title bar. Bisection lead to the commit mentioned
above and further investigation by means of strace told me that Emacs
is indeed speaking to my Xorg through an O_ASYNC AF_UNIX socket. This is
reproducible 100% of times and the fact that properly initializing the
struct socket_wq ->flags fixes the issue leads me to the conclusion that
somehow SOCKWQ_ASYNC_WAITDATA got set in the uninitialized ->flags,
preventing my Emacs from receiving any SIGIO's due to data becoming
available and it got stuck.

Make sock_alloc_inode() set the newly created struct socket_wq's ->flags
member to zero.

Fixes: ceb5d58b ("net: fix sock_wake_async() rcu protection")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2015-12-29

This series contains updates to ixgbe and ixgbevf.

William Dauchy provides a fix for ixgbevf that was implemented for ixgbe,
commit 5d6002b7 ("ixgbe: Fix handling of NAPI budget when multiple
queues are enabled per vector"). The issue was that the polling routine
would increase the budget for receive to at least 1 per queue if multiple
queues were present, which resulted in receive packets being processed
when the budget was 0.

Emil provides minor cleanups for ixgbevf, one being that we need to
check rx_itr_setting with == and not &, since it is not a mask.  Added
QSFP PHY support in ixgbe to allow for more accurate reporting of port
settings.  Fixed the max RSS limit for X550 which is 63, not 64.

Veola fixes ixgbe ethtool reporting of backplane type interfaces as
1000/10000baseT link modes, instead, report the media as KR, KX or KX4
based on the backplane interface present.

Mark cleans up redundancy in the setting of hw_enc_features that makes
it appear that X550 has more encapsulation features than other devices.
Also do not set NETIF_F_SG any longer since that is set by the
register_netdev() call.  Also fixed the X550EM_x revision check, which
needs to check a value, not just a bit.

Alex Duyck fixes additional bugs in ixgbe_clear_vf_vlans(), one being
that the mask was using a divide instead of a modulus, which resulted
in the mask bit being incorrectly set to 0 or 1 based on the value of
the VF being tested.  Alex also found that he was not consistent in
using the "word" argument as an offset or as a register offset, so
made the code consistently use word as the offset in the array.

v2: dropped patch 8 of the original series, as it was undoing a part of
    the fix Alex Duyck was doing in patch 9 of the original series.
    Dropped based on feedback from Emil (the author).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Sathya Perla says:

====================
be2net: patch set

The following patch set contains some feature additions, code re-organization
and cleanup and a few non-critical fixes. Pls consider applying this to
the net-next tree. Thanks.

v3 changes: add a default case to the switch statement in patch 5 to
satisfy the compiler (-Wswitch).
v2 changes: replaced an if/else block that checks for error values with a
switch/case statement in patch 5.

Patch 1 fixes VF link state transition from disabled to auto that did
not work due to an issue in the FW. This issue could not be fixed in FW due
to some backward compatibility issues it causes with released drivers.
The issue has been fixed by introducing a new version (v2) of the cmd
from 10.6 FW onwards. This patch adds support for v2 version of this cmd.

Patch 2 reports a EOPNOTSUPP status to ethtool when the user tries to
configure BE3/SRIOV in VEPA mode as it is not supported by the chip.

Patch 3 cleansup FW flash image related constant definitions. Many of these
definitions (such as section offset values) were defined in decimal format
rather than hexa-decimal. This makes this part of the code un-readable.
Also some defines related to BE2 are labeld "g2" and defines related to BE3
are labeled "g3".  This patch cleans up all of this to make this code more
readable.

Patch 4 moves the FW cmd code to be_cmds.c. All code relating to FW cmds
has been in be_cmds.[ch], excepting FW flash cmd related code.
This patch moves these routines from be_main.c to be_cmds.c.

Patch 5 adds a log message to report digital signature errors while
flashing a FW image. From FW version 11.0 onwards, the FW supports a new
"secure mode" feature (based on a jumper setting on the adapter.) In this
mode, the FW image when flashed is authenticated with a digital signature.

Patch 6 removes a line of code that has no effect.

Patch 7 removes some unused variables.

Patch 8 fixes port resource descriptor query via the GET_PROFILE FW cmd.
An earlier commit passed a specific pf_num while issuing this cmd as FW
returns descriptors for all functions when pf_num is zero. But, when pf_num
is set to a non-zero value, FW does not return the port resource descriptor.
This patch fixes this by setting pf_num to 0 while issuing the query cmd
and adds code to pick the correct NIC resource descriptor from the list of
descriptors returned by FW.

Patch 9 adds support for ethtool get-dump feature. In the past when this
option was not yet available, this feature was supported via the
--register-dump option as a workaround.  This patch removes support for
FW-dump via --register-dump option as it is now available via --get-dump
option. Even though the "ethtool --register-dump" cmd which used to work
earlier, will now fail with ENOTSUPP error, we feel it is not an issue as
this is used only for diagnostics purpose.

Patch 10 bumps up the driver version.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for ethtool's --get-dump option in be2net,
to retrieve FW dump. In the past when this option was not yet available,
this feature was supported via the --register-dump option as a workaround.
This patch removes support for FW-dump via --register-dump option as it is
now available via --get-dump option. Even though the
"ethtool --register-dump" cmd which used to work earlier, will now fail
with ENOTSUPP error, we feel it is not an issue as this is used only
for diagnostics purpose.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 72ef3a88 ("be2net: set pci_func_num while issuing
GET_PROFILE_CONFIG cmd") passed a specific pf_num while issuing a
GET_PROFILE_CONFIG cmd as FW returns descriptors for all functions when
pf_num is zero. But, when pf_num is set to a non-zero value, FW does not
return the Port resource descriptor.
This patch fixes this by setting pf_num to 0 while issuing the query cmd
and adds code to pick the correct NIC resource descriptor from the list of
descriptors returned by FW.

Fixes: 72ef3a88 ("be2net: set pci_func_num while issuing
		     GET_PROFILE_CONFIG cmd")
Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

eeh_error, fw_timeout, hw_error variables in the be_adapter structure are
not used anymore. An earlier patch that introduced adapter->err_flags to
store this information missed removing these variables.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes a line of code that changes adapter->recommended_prio
value followed by yet another assignment.
Also, the variable is used to store the vlan priority value that is already
shifted to the PCP bits position in the vlan tag format. Hence, the name of
this variable is changed to recommended_prio_bits.
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

(based on a jumper setting on the adapter.) In this mode, the FW image when
flashed is authenticated with a digital signature. This patch logs
appropriate error messages and return a status to ethtool when errors
relating to FW image authentication occur.
Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All code relating to FW cmds is in be_cmds.[ch] excepting FW flash cmd
related code. This patch moves these routines from be_main.c to be_cmds.c
Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Many constant definitions relating to the FW-image layout
(such as section offset values) were defined in decimal format rather than
hexa-decimal. This makes this part of the code un-readable. Also some
defines related to BE2 are labeld "g2" and defines related to BE3 are
labeled "g3".  This patch cleans up all of this to make this code more
readable.
Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

BE3 chip doesn't support VEPA mode.
Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>