These kfuncs will be used by selftests in following patches
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-7-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Newly-added bpf_rbtree_{remove,first} kfuncs have some special properties
that require handling in the verifier:

  * both bpf_rbtree_remove and bpf_rbtree_first return the type containing
    the bpf_rb_node field, with the offset set to that field's offset,
    instead of a struct bpf_rb_node *
    * mark_reg_graph_node helper added in previous patch generalizes
      this logic, use it

  * bpf_rbtree_remove's node input is a node that's been inserted
    in the tree - a non-owning reference.

  * bpf_rbtree_remove must invalidate non-owning references in order to
    avoid aliasing issue. Use previously-added
    invalidate_non_owning_refs helper to mark this function as a
    non-owning ref invalidation point.

  * Unlike other functions, which convert one of their input arg regs to
    non-owning reference, bpf_rbtree_first takes no arguments and just
    returns a non-owning reference (possibly null)
    * For now verifier logic for this is special-cased instead of
      adding new kfunc flag.

This patch, along with the previous one, complete special verifier
handling for all rbtree API functions added in this series.

With functional verifier handling of rbtree_remove, under current
non-owning reference scheme, a node type with both bpf_{list,rb}_node
fields could cause the verifier to accept programs which remove such
nodes from collections they haven't been added to.

In order to prevent this, this patch adds a check to btf_parse_fields
which rejects structs with both bpf_{list,rb}_node fields. This is a
temporary measure that can be removed after "collection identity"
followup. See comment added in btf_parse_fields. A linked_list BTF test
exercising the new check is added in this patch as well.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-6-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Some BPF helpers take a callback function which the helper calls. For
each helper that takes such a callback, there's a special call to
__check_func_call with a callback-state-setting callback that sets up
verifier bpf_func_state for the callback's frame.

kfuncs don't have any of this infrastructure yet, so let's add it in
this patch, following existing helper pattern as much as possible. To
validate functionality of this added plumbing, this patch adds
callback handling for the bpf_rbtree_add kfunc and hopes to lay
groundwork for future graph datastructure callbacks.

In the "general plumbing" category we have:

  * check_kfunc_call doing callback verification right before clearing
    CALLER_SAVED_REGS, exactly like check_helper_call
  * recognition of func_ptr BTF types in kfunc args as
    KF_ARG_PTR_TO_CALLBACK + propagation of subprogno for this arg type

In the "rbtree_add / graph datastructure-specific plumbing" category:

  * Since bpf_rbtree_add must be called while the spin_lock associated
    with the tree is held, don't complain when callback's func_state
    doesn't unlock it by frame exit
  * Mark rbtree_add callback's args with ref_set_non_owning
    to prevent rbtree api functions from being called in the callback.
    Semantically this makes sense, as less() takes no ownership of its
    args when determining which comes first.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-5-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Now that we find bpf_rb_root and bpf_rb_node in structs, let's give args
that contain those types special classification and properly handle
these types when checking kfunc args.

"Properly handling" these types largely requires generalizing similar
handling for bpf_list_{head,node}, with little new logic added in this
patch.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-4-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds implementations of bpf_rbtree_{add,remove,first}
and teaches verifier about their BTF_IDs as well as those of
bpf_rb_{root,node}.

All three kfuncs have some nonstandard component to their verification
that needs to be addressed in future patches before programs can
properly use them:

  * bpf_rbtree_add:     Takes 'less' callback, need to verify it

  * bpf_rbtree_first:   Returns ptr_to_node_type(off=rb_node_off) instead
                        of ptr_to_rb_node(off=0). Return value ref is
			non-owning.

  * bpf_rbtree_remove:  Returns ptr_to_node_type(off=rb_node_off) instead
                        of ptr_to_rb_node(off=0). 2nd arg (node) is a
			non-owning reference.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-3-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds special BPF_RB_{ROOT,NODE} btf_field_types similar to
BPF_LIST_{HEAD,NODE}, adds the necessary plumbing to detect the new
types, and adds bpf_rb_root_free function for freeing bpf_rb_root in
map_values.

structs bpf_rb_root and bpf_rb_node are opaque types meant to
obscure structs rb_root_cached rb_node, respectively.

btf_struct_access will prevent BPF programs from touching these special
fields automatically now that they're recognized.

btf_check_and_fixup_fields now groups list_head and rb_root together as
"graph root" fields and {list,rb}_node as "graph node", and does same
ownership cycle checking as before. Note that this function does _not_
prevent ownership type mixups (e.g. rb_root owning list_node) - that's
handled by btf_parse_graph_root.

After this patch, a bpf program can have a struct bpf_rb_root in a
map_value, but not add anything to nor do anything useful with it.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-2-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This patch introduces non-owning reference semantics to the verifier,
specifically linked_list API kfunc handling. release_on_unlock logic for
refs is refactored - with small functional changes - to implement these
semantics, and bpf_list_push_{front,back} are migrated to use them.

When a list node is pushed to a list, the program still has a pointer to
the node:

  n = bpf_obj_new(typeof(*n));

  bpf_spin_lock(&l);
  bpf_list_push_back(&l, n);
  /* n still points to the just-added node */
  bpf_spin_unlock(&l);

What the verifier considers n to be after the push, and thus what can be
done with n, are changed by this patch.

Common properties both before/after this patch:
  * After push, n is only a valid reference to the node until end of
    critical section
  * After push, n cannot be pushed to any list
  * After push, the program can read the node's fields using n

Before:
  * After push, n retains the ref_obj_id which it received on
    bpf_obj_new, but the associated bpf_reference_state's
    release_on_unlock field is set to true
    * release_on_unlock field and associated logic is used to implement
      "n is only a valid ref until end of critical section"
  * After push, n cannot be written to, the node must be removed from
    the list before writing to its fields
  * After push, n is marked PTR_UNTRUSTED

After:
  * After push, n's ref is released and ref_obj_id set to 0. NON_OWN_REF
    type flag is added to reg's type, indicating that it's a non-owning
    reference.
    * NON_OWN_REF flag and logic is used to implement "n is only a
      valid ref until end of critical section"
  * n can be written to (except for special fields e.g. bpf_list_node,
    timer, ...)

Summary of specific implementation changes to achieve the above:

  * release_on_unlock field, ref_set_release_on_unlock helper, and logic
    to "release on unlock" based on that field are removed

  * The anonymous active_lock struct used by bpf_verifier_state is
    pulled out into a named struct bpf_active_lock.

  * NON_OWN_REF type flag is introduced along with verifier logic
    changes to handle non-owning refs

  * Helpers are added to use NON_OWN_REF flag to implement non-owning
    ref semantics as described above
    * invalidate_non_owning_refs - helper to clobber all non-owning refs
      matching a particular bpf_active_lock identity. Replaces
      release_on_unlock logic in process_spin_lock.
    * ref_set_non_owning - set NON_OWN_REF type flag after doing some
      sanity checking
    * ref_convert_owning_non_owning - convert owning reference w/
      specified ref_obj_id to non-owning references. Set NON_OWN_REF
      flag for each reg with that ref_obj_id and 0-out its ref_obj_id

  * Update linked_list selftests to account for minor semantic
    differences introduced by this patch
    * Writes to a release_on_unlock node ref are not allowed, while
      writes to non-owning reference pointees are. As a result the
      linked_list "write after push" failure tests are no longer scenarios
      that should fail.
    * The test##missing_lock##op and test##incorrect_lock##op
      macro-generated failure tests need to have a valid node argument in
      order to have the same error output as before. Otherwise
      verification will fail early and the expected error output won't be seen.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230212092715.1422619-2-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Alexander Lobakin says:

====================
The set grew from the poor performance of %BPF_F_TEST_XDP_LIVE_FRAMES
when the ice-backed device is a sender. Initially there were around
3.3 Mpps / thread, while I have 5.5 on skb-based pktgen ...

After fixing 0005 (0004 is a prereq for it) first (strange thing nobody
noticed that earlier), I started catching random OOMs. This is how 0002
(and partially 0001) appeared.

0003 is a suggestion from Maciej to not waste time on refactoring dead
lines. 0006 is a "cherry on top" to get away with the final 6.7 Mpps.
4.5 of 6 are fixes, but only the first three are tagged, since it then
starts being tricky. I may backport them manually later on.

TL;DR for the series is that shortcuts are good, but only as long as
they don't make the driver miss important things. %XDP_TX is purely
driver-local, however .ndo_xdp_xmit() is not, and sometimes assumptions
can be unsafe there.

With that series and also one core code patch[0], "live frames" and
xdp-trafficgen are now safe'n'fast on ice (probably more to come).

  [0] https://lore.kernel.org/all/20230209172827.874728-1-alexandr.lobakin@intel.com
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

After the recent mbuf changes, ice_xmit_xdp_ring() became a 3-liner.
It makes no sense to keep it global in a different file than its caller.
Move it just next to the sole call site and mark static. Also, it
doesn't need a full xdp_convert_frame_to_buff(). Save several cycles
and fill only the fields used by __ice_xmit_xdp_ring() later on.
Finally, since it doesn't modify @xdpf anyhow, mark the argument const
to save some more (whole -11 bytes of .text! :D).

Thanks to 1 jump less and less calcs as well, this yields as many as
6.7 Mpps per queue. `xdp.data_hard_start = xdpf` is fully intentional
again (see xdp_convert_buff_to_frame()) and just works when there are
no source device's driver issues.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-7-alexandr.lobakin@intel.com

As already mentioned, freeing any &xdp_frame via page_frag_free() is
wrong, as it assumes the frame is backed by either an order-0 page or
a page with no "patrons" behind them, while in fact frames backed by
Page Pool can be redirected to a device, which's driver doesn't use it.
Keep storing a pointer to the raw buffer and then freeing it
unconditionally via page_frag_free() for %XDP_TX frames, but introduce
a separate type in the enum for frames coming through .ndo_xdp_xmit(),
and free them via xdp_return_frame_bulk(). Note that saving xdpf as
xdp_buff->data_hard_start is intentional and is always true when
everything is configured properly.
After this change, %XDP_REDIRECT from a Page Pool based driver to ice
becomes zero-alloc as it should be and horrendous 3.3 Mpps / queue
turn into 6.6, hehe.

Let it go with no "Fixes:" tag as it spans across good 5+ commits and
can't be trivially backported.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-6-alexandr.lobakin@intel.com

When queueing frames from a Page Pool for redirecting to a device backed
by the ice driver, `perf top` shows heavy load on page_alloc() and
page_frag_free(), despite that on a properly working system it must be
fully or at least almost zero-alloc. The problem is in fact a bit deeper
and raises from how ice cleans up completed Tx buffers.

The story so far: when cleaning/freeing the resources related to
a particular completed Tx frame (skbs, DMA mappings etc.), ice uses some
heuristics only without setting any type explicitly (except for dummy
Flow Director packets, which are marked via ice_tx_buf::tx_flags).
This kinda works, but only up to some point. For example, currently ice
assumes that each frame coming to __ice_xmit_xdp_ring(), is backed by
either plain order-0 page or plain page frag, while it may also be
backed by Page Pool or any other possible memory models introduced in
future. This means any &xdp_frame must be freed properly via
xdp_return_frame() family with no assumptions.

In order to do that, the whole heuristics must be replaced with setting
the Tx buffer/frame type explicitly, just how it's always been done via
an enum. Let us reuse 16 bits from ::tx_flags -- 1 bit-and instr won't
hurt much -- especially given that sometimes there was a check for
%ICE_TX_FLAGS_DUMMY_PKT, which is now turned from a flag to an enum
member. The rest of the changes is straightforward and most of it is
just a conversion to rely now on the type set in &ice_tx_buf rather than
to some secondary properties.
For now, no functional changes intended, the change only prepares the
ground for starting freeing XDP frames properly next step. And it must
be done atomically/synchronously to not break stuff.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-5-alexandr.lobakin@intel.com

The tagged commit started sending %XDP_TX frames from XSk Rx ring
directly without converting it to an &xdp_frame. However, when XSk is
enabled on a queue pair, it has its separate Tx cleaning functions, so
neither ice_clean_xdp_irq() nor ice_unmap_and_free_tx_buf() ever happens
there.
Remove impossible branches in order to reduce the diffstat of the
upcoming change.

Fixes: a24b4c6e ("ice: xsk: Do not convert to buff to frame for XDP_TX")
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-4-alexandr.lobakin@intel.com

Sometimes, under heavy XDP Tx traffic, e.g. when using XDP traffic
generator (%BPF_F_TEST_XDP_LIVE_FRAMES), the machine can catch OOM due
to the driver not freeing all of the pages passed to it by
.ndo_xdp_xmit().
Turned out that during the development of the tagged commit, the check,
which ensures that we have a free descriptor to queue a frame, moved
into the branch happening only when a buffer has frags. Otherwise, we
only run a cleaning cycle, but don't check anything.
ATST, there can be situations when the driver gets new frames to send,
but there are no buffers that can be cleaned/completed and the ring has
no free slots. It's very rare, but still possible (> 6.5 Mpps per ring).
The driver then fills the next buffer/descriptor, effectively
overwriting the data, which still needs to be freed.

Restore the check after the cleaning routine to make sure there is a
slot to queue a new frame. When there are frags, there still will be a
separate check that we can place all of them, but if the ring is full,
there's no point in wasting any more time.

(minor: make `!ready_frames` unlikely since it happens ~1-2 times per
 billion of frames)

Fixes: 3246a107 ("ice: Add support for XDP multi-buffer on Tx side")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-3-alexandr.lobakin@intel.com

xdp_tx_active is used to indicate whether an XDP ring has any %XDP_TX
frames queued to shortcut processing Tx cleaning for XSk-enabled queues.
When !XSk, it simply indicates whether the ring has any queued frames in
general.
It gets increased on each frame placed onto the ring and counts the
whole frame, not each frag. However, currently it gets decremented in
ice_clean_xdp_tx_buf(), which is called per each buffer, i.e. per each
frag. Thus, on completing multi-frag frames, an underflow happens.
Move the decrement to the outer function and do it once per frame, not
buf. Also, do that on the stack and update the ring counter after the
loop is done to save several cycles.
XSk rings are fine since there are no frags at the moment.

Fixes: 3246a107 ("ice: Add support for XDP multi-buffer on Tx side")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-2-alexandr.lobakin@intel.com

Building BPF selftests out of srctree fails with:

  make: *** No rule to make target '/linux-build//ima_setup.sh', needed by 'ima_setup.sh'.  Stop.

The culprit is the rule that defines convenient shorthands like
"make test_progs", which builds $(OUTPUT)/test_progs. These shorthands
make sense only for binaries that are built though; scripts that live
in the source tree do not end up in $(OUTPUT).

Therefore drop $(TEST_PROGS) and $(TEST_PROGS_EXTENDED) from the rule.

The issue exists for a while, but it became a problem only after commit
d68ae498 ("selftests/bpf: Install all required files to run selftests"),
which added dependencies on these scripts.

Fixes: 03dcb784 ("selftests/bpf: Add simple per-test targets to Makefile")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230208231211.283606-1-iii@linux.ibm.com

v1.25 of pahole supports filtering out functions with multiple inconsistent
function prototypes or optimized-out parameters from the BTF representation.
These present problems because there is no additional info in BTF saying which
inconsistent prototype matches which function instance to help guide attachment,
and functions with optimized-out parameters can lead to incorrect assumptions
about register contents.

So for now, filter out such functions while adding BTF representations for
functions that have "."-suffixes (foo.isra.0) but not optimized-out parameters.
This patch assumes that below linked changes land in pahole for v1.25.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/1675790102-23037-1-git-send-email-alan.maguire@oracle.com
Link: https://lore.kernel.org/bpf/1675949331-27935-1-git-send-email-alan.maguire@oracle.com

Yafang Shao says:

====================

The bpf memory accouting has some known problems in contianer
environment,

- The container memory usage is not consistent if there's pinned bpf
  program
  After the container restart, the leftover bpf programs won't account
  to the new generation, so the memory usage of the container is not
  consistent. This issue can be resolved by introducing selectable
  memcg, but we don't have an agreement on the solution yet. See also
  the discussions at https://lwn.net/Articles/905150/ .

- The leftover non-preallocated bpf map can't be limited
  The leftover bpf map will be reparented, and thus it will be limited by
  the parent, rather than the container itself. Furthermore, if the
  parent is destroyed, it be will limited by its parent's parent, and so
  on. It can also be resolved by introducing selectable memcg.

- The memory dynamically allocated in bpf prog is charged into root memcg
  only
  Nowdays the bpf prog can dynamically allocate memory, for example via
  bpf_obj_new(), but it only allocate from the global bpf_mem_alloc
  pool, so it will charge into root memcg only. That needs to be
  addressed by a new proposal.

So let's give the container user an option to disable bpf memory accouting.

The idea of "cgroup.memory=nobpf" is originally by Tejun[1].

[1]. https://lwn.net/ml/linux-mm/YxjOawzlgE458ezL@slm.duckdns.org/

Changes,
v1->v2:
- squash patches (Roman)
- commit log improvement in patch #2. (Johannes)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

We can simply disable the bpf prog memory accouting by not setting the
GFP_ACCOUNT.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20230210154734.4416-5-laoar.shao@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

We can simply set root memcg as the map's memcg to disable bpf memory
accounting. bpf_map_area_alloc is a little special as it gets the memcg
from current rather than from the map, so we need to disable GFP_ACCOUNT
specifically for it.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20230210154734.4416-4-laoar.shao@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Introduce new helper bpf_map_kvcalloc() for the memory allocation in
bpf_local_storage(). Then the allocation will charge the memory from the
map instead of from current, though currently they are the same thing as
it is only used in map creation path now. By charging map's memory into
the memcg from the map, it will be more clear.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20230210154734.4416-3-laoar.shao@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add new kernel parameter cgroup.memory=nobpf to allow user disable bpf
memory accounting. This is a preparation for the followup patch.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20230210154734.4416-2-laoar.shao@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Given BPF is increasingly being used beyond just the Linux kernel, with
implementations in NICs and other hardware, Windows, etc, there is an
ongoing effort to document and standardize parts of the existing BPF
infrastructure such as its ISA. As "source of truth" we decided some
time ago to rely on the in-tree documentation, in particular, starting
out with the Documentation/bpf/instruction-set.rst as a base for later
RFC drafts on the ISA. Therefore, we want to ensure that changes to that
document have bpf@ietf.org in Cc, so add a MAINTAINERS file entry with
a section on documents related to standardization efforts. For now, this
only relates to instruction-set.rst, and later additional files will be
added.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Thaler <dthaler@microsoft.com>
Cc: bpf@ietf.org
Link: https://datatracker.ietf.org/doc/bofreq-thaler-bpf-ebpf/
Link: https://lore.kernel.org/r/57619c0dd8e354d82bf38745f99405e3babdc970.1676068387.git.daniel@iogearbox.netSigned-off-by: Alexei Starovoitov <ast@kernel.org>

====================
pull-request: bpf-next 2023-02-11

We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).

There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e53 ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13a ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:

        [...]
        ice_set_netdev_features(netdev);
        netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
                               NETDEV_XDP_ACT_XSK_ZEROCOPY;
        ice_set_ops(netdev);
        [...]

Stephen's merge conflict mail:
https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/

The main changes are:

1) Add support for BPF trampoline on s390x which finally allows to remove many
   test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.

2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.

3) Add capability to export the XDP features supported by the NIC.
   Along with that, add a XDP compliance test tool,
   from Lorenzo Bianconi & Marek Majtyka.

4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
   from David Vernet.

5) Add a deep dive documentation about the verifier's register
   liveness tracking algorithm, from Eduard Zingerman.

6) Fix and follow-up cleanups for resolve_btfids to be compiled
   as a host program to avoid cross compile issues,
   from Jiri Olsa & Ian Rogers.

7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
   when testing on different NICs, from Jesper Dangaard Brouer.

8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.

9) Extend libbpf to add an option for when the perf buffer should
   wake up, from Jon Doron.

10) Follow-up fix on xdp_metadata selftest to just consume on TX
    completion, from Stanislav Fomichev.

11) Extend the kfuncs.rst document with description on kfunc
    lifecycle & stability expectations, from David Vernet.

12) Fix bpftool prog profile to skip attaching to offline CPUs,
    from Tonghao Zhang.

====================

Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Correct spelling problems for Documentation/isdn/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230209071400.31476-9-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Xin Long says:

====================
net: move more duplicate code of ovs and tc conntrack into nf_conntrack_ovs

We've moved some duplicate code into nf_nat_ovs in:

  "net: eliminate the duplicate code in the ct nat functions of ovs and tc"

This patchset addresses more code duplication in the conntrack of ovs
and tc then creates nf_conntrack_ovs for them, and four functions will
be extracted and moved into it:

  nf_ct_handle_fragments()
  nf_ct_skb_network_trim()
  nf_ct_helper()
  nf_ct_add_helper()
====================

Link: https://lore.kernel.org/r/cover.1675810210.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Now handle_fragments() in OVS and TC have the similar code, and
this patch removes the duplicate code by moving the function
to nf_conntrack_ovs.

Note that skb_clear_hash(skb) or skb->ignore_df = 1 should be
done only when defrag returns 0, as it does in other places
in kernel.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch has no functional changes and just moves frag check and
tc_skb_cb update out of handle_fragments, to make it easier to move
the duplicate code from handle_fragments() into nf_conntrack_ovs later.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch has no functional changes and just moves key and ovs_cb update
out of handle_fragments, and skb_clear_hash() and skb->ignore_df change
into handle_fragments(), to make it easier to move the duplicate code
from handle_fragments() into nf_conntrack_ovs later.

Note that it changes to pass info->family to handle_fragments() instead
of key for the packet type check, as info->family is set according to
key->eth.type in ovs_ct_copy_action() when creating the action.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There are almost the same code in ovs_skb_network_trim() and
tcf_ct_skb_network_trim(), this patch extracts them into a function
nf_ct_skb_network_trim() and moves the function to nf_conntrack_ovs.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to nf_nat_ovs created by Commit ebddb140 ("net: move the
nat function to nf_nat_ovs for ovs and tc"), this patch is to create
nf_conntrack_ovs to get these functions shared by OVS and TC only.

There are nf_ct_helper() and nf_ct_add_helper() from nf_conntrak_helper
in this patch, and will be more in the following patches.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The code assumes that everything that comes after nlmsgerr are nlattrs.
When calculating their size, it does not account for the initial
nlmsghdr. This may lead to accessing uninitialized memory.

Fixes: bbf48c18 ("libbpf: add error reporting in XDP")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-8-iii@linux.ibm.com

malloc() and free() may be completely replaced by sanitizers, use
fopen() and fclose() instead.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-7-iii@linux.ibm.com

malloc() and free() may be completely replaced by sanitizers, use
fopen() and fclose() instead.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-6-iii@linux.ibm.com

To get useful results from the Memory Sanitizer, all code running in a
process needs to be instrumented. When building tests with other
sanitizers, it's not strictly necessary, but is also helpful.
So make sure runqslower and libbpf are compiled with SAN_CFLAGS and
linked with SAN_LDFLAGS.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-5-iii@linux.ibm.com

Memory Sanitizer requires passing different options to CFLAGS and
LDFLAGS: besides the mandatory -fsanitize=memory, one needs to pass
header and library paths, and passing -L to a compilation step
triggers -Wunused-command-line-argument. So introduce a separate
variable for linker flags. Use $(SAN_CFLAGS) as a default in order to
avoid complicating the ASan usage.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-4-iii@linux.ibm.com

This makes it possible to add sanitizer flags.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-3-iii@linux.ibm.com

Using HOSTCC="ccache clang" breaks building the tests, since, when it's
forwarded to e.g. bpftool, the child make sees HOSTCC=ccache and
"clang" is considered a target. Fix by quoting it, and also HOSTLD and
HOSTAR for consistency.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-2-iii@linux.ibm.com

skbuff_head_cache is misnamed (perhaps for historical reasons?)
because it does not hold heads. Head is the buffer which skb->data
points to, and also where shinfo lives. struct sk_buff is a metadata
structure, not the head.

Eric recently added skb_small_head_cache (which allocates actual
head buffers), let that serve as an excuse to finally clean this up :)

Leave the user-space visible name intact, it could possibly be uAPI.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: prepare for GSI register updtaes

An upcoming series (or two) will convert the definitions of GSI
registers used by IPA so they use the "IPA reg" mechanism to specify
register offsets and their fields.  This will simplify implementing
the fairly large number of changes required in GSI registers to
support more than 32 GSI channels (introduced in IPA v5.0).

A few minor problems and inconsistencies were found, and they're
fixed here.  The last three patches in this series change the
"ipa_reg" code to separate the IPA-specific part (the base virtual
address, basically) from the generic register part, and the now-
generic code is renamed to use just "reg_" or "REG_" as a prefix
rather than "ipa_reg" or "IPA_REG_".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename functions related to register fields so they don't appear to
be IPA-specific, and move their definitions into "reg.h":
    ipa_reg_fmask()	-> reg_fmask()
    ipa_reg_bit()	-> reg_bit()
    ipa_reg_field_max()	-> reg_field_max()
    ipa_reg_encode()	-> reg_encode()
    ipa_reg_decode()	-> reg_decode()
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>