- 18 Aug, 2020 3 commits
-
-
David Stevens authored
Add support for UUID-based resource sharing mechanism to virtgpu. This implements the new virtgpu commands and hooks them up to dma-buf's get_uuid callback. Signed-off-by:
David Stevens <stevensd@chromium.org> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200818071343.3461203-4-stevensd@chromium.orgSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
David Stevens authored
This feature allows the guest to request a UUID from the host for a particular virtio_gpu resource. The UUID can then be shared with other virtio devices, to allow the other host devices to access the virtio_gpu's corresponding host resource. Signed-off-by:
-
David Stevens authored
This change adds a new flavor of dma-bufs that can be used by virtio drivers to share exported objects. A virtio dma-buf can be queried by virtio drivers to obtain the UUID which identifies the underlying exported object. Signed-off-by:
-
- 17 Aug, 2020 5 commits
-
-
Sidong Yang authored
Replace deprecated function drm_modeset_lock/unlock_all with helper function DRM_MODESET_LOCK_ALL_BEGIN/END. Signed-off-by:
Sidong Yang <realwakka@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200524022624.10363-1-realwakka@gmail.comSigned-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200617215707.GA16785@embeddedorSigned-off-by:
-
Gerd Hoffmann authored
qemu 5.0 introduces a new qxl hardware revision 5. Unlike revision 4 (and below) the device doesn't switch back into vga compatibility mode when someone touches the vga ports. So we don't have to reserve the vga ports any more to avoid that happening. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20200807105501.24599-1-kraxel@redhat.com
-
Gurchetan Singh authored
This reverts commit d323bb44. Fixes a double-free regression: [ 4.357928] drm_gem_shmem_free_object+0xb4/0x100 [ 4.358983] virtio_gpu_dequeue_ctrl_func+0xd9/0x290 [ 4.360343] process_one_work+0x1d2/0x3a0 [ 4.361581] worker_thread+0x45/0x3c0 [ 4.362645] kthread+0xf6/0x130 [ 4.363543] ? process_one_work+0x3a0/0x3a0 [ 4.364770] ? kthread_park+0x80/0x80 [ 4.365799] ret_from_fork+0x35/0x40 [ 4.367103] Modules linked in: [ 4.367958] CR2: 0000000000000018 [ 4.368857] ---[ end trace db84f7a2974d5c79 ]--- [ 4.370118] RIP: 0010:dma_direct_unmap_sg+0x1f/0x60 In addition, virtio has it's own set of dma-ops so there's not an obviously clean way to transition to shmem helpers. Fixes: d323bb44 ("drm/virtio: Call the right shmem helpers") Signed-off-by:
Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200615230500.551-1-gurchetansingh@chromium.orgSigned-off-by:
-
Colin Ian King authored
Variables width and height are being assigned values that are never read. The assignments are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200701134154.549112-1-colin.king@canonical.comSigned-off-by:
-
- 16 Aug, 2020 6 commits
-
-
Guido Günther authored
I maintained the txt based bindings before yaml conversion and care about the driver. Signed-off-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/9427a9c0e6aaf9fb375f7ecee6691ba491149d52.1597561897.git.agx@sigxcpu.org
-
Guido Günther authored
- Use common properties from panel-common.yaml - Indent comment like content - Don't preserve newlines in description - Indent example by four spaces Signed-off-by:
-
Dmitry Osipenko authored
The panel orientation needs to parsed from a device-tree and assigned to the panel's connector in order to make orientation property available to userspace. That's what this patch does for the panel-simple driver. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
The panel orientation needs to parsed from a device-tree and assigned to the panel's connector in order to make orientation property available to userspace. That's what this patch does for the generic LVDS panel. Signed-off-by:
-
Derek Basehore authored
This reads the DT setting for the panel rotation to set the panel orientation in the get_modes callback. Reviewed-by:
Derek Basehore <dbasehore@chromium.org> Signed-off-by:
-
Derek Basehore authored
This adds a helper function for reading the rotation (panel orientation) from the device tree. Reviewed-by:
-
- 15 Aug, 2020 9 commits
-
-
Icenowy Zheng authored
Feixin K101-IM2BYL02 is a new panel by Feixin designed as a replacement to their K101-IM2BA02 panel. This panel utilizes the Ilitek ILI9881C controller. Add this panel's initialzation sequence and timing to ILI9881C driver. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
-
Icenowy Zheng authored
Feixin K101-IM2BYL02 is a drop-in replacement of K101-IM2BA02 panel (which is already supported by panel-feixin-k101-im2ba02 driver) with the same pinout. It utilizes an Ilitek ILI9881C controller chip, so its compatible string should be added to ilitek,ili9881c file. Add the compatible string for it. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Icenowy Zheng authored
There're more panels with ILI9881C controller than the Bananapi one supported by this driver. Extract the mode and init sequence part, to prepare the driver for adding new panels. Signed-off-by:
-
Paul Cercueil authored
Add a perfect 50.00 Hz frame rate mode to the list of available modes for the Sharp LS020B1DD01D panel. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
-
Paul Cercueil authored
Modify the video mode in order to obtain a perfect 60.00 Hz frame rate using a 3 MHz pixel clock. Signed-off-by:
-
Paul Cercueil authored
Convert the Sharp LS020B1DD01D panel entry from using a struct display_timing to using a struct drm_display_mode, as display_timing seems to be the old and legacy format. Signed-off-by:
-
Paul Cercueil authored
If you pass a string that is not terminated with a carriage return to dev_err(), it will eventually be printed with a carriage return, but not right away, since the kernel will wait for a pr_cont(). Signed-off-by:
-
Paul Cercueil authored
Instead of manipulating the backlight directly in this driver, register it in the probe using drm_panel_of_backlight() and let the drm_panel framework code handle it. Signed-off-by:
-
Linus Walleij authored
The vendor driver makes a few retries on read DSI transactions, something that is needed especially in case of read (such as reading the panel MTP ID) while the panel is running in video mode. This happens on the Samsung s6e63m0 panel on the Golden device. Retry reads and writes alike three times. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Stephan Gerhold <stephan@gerhold.net> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200814194451.3494294-1-linus.walleij@linaro.org
-
- 13 Aug, 2020 8 commits
-
-
Laurent Pinchart authored
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel, set the bus format to MEDIA_BUS_FMT_RGB666_1X18. Fixes: 725c9d40 ("drm/panel: Add support for OrtusTech COM43H4M85ULC panel") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sam Ravnborg <sam.ravnborg@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200812220244.24500-1-laurent.pinchart@ideasonboard.com
-
Linus Walleij authored
The MCDE DSI link hardware which is modeled like a bridge in DRM, connected further to the panel bridge, creating a pipeline. We have been using the .pre_enable(), .enable(), .disable() and .post_disable() callbacks from the bridge to set this up in a chained manner: first the display controller goes online and then in successive order each bridge in the pipeline. Inside DRM it works like this: drm_atomic_helper_commit_tail() drm_atomic_helper_commit_modeset_enables() struct drm_crtc_helper_funcs .atomic_enable() struct drm_simple_display_pipe_funcs .enable() MCDE display enable call drm_atomic_bridge_chain_enable() struct drm_bridge_funcs .pre_enable() mcde_dsi_bridge_pre_enable() panel_bridge_pre_enable() struct drm_panel_funcs .prepare() struct drm_bridge_funcs .enable() mcde_dsi_bridge_enable() panel_bridge_enable() struct drm_panel_funcs .enable() A similar sequence is executed for disabling. Unfortunately this is not what the hardware needs: at a certain stage in the enablement of the display controller the DSI link needs to come up to support video mode, else something (like a FIFO flow) locks up the hardware and we never get picture. Fix this by simply leaving the pre|enable and post|disable callbacks unused, and establish two cross-calls from the display controller to bring up the DSI link at the right place in the display bring-up sequence and vice versa in the shutdown sequence. For command mode displays, it works just fine to also enable the display flow early. The only time we hold it back right now is in one-shot mode, on-demand display updates. When combined with the previous patch and some patches for the S6E63M0 display controller to support DSI mode, this gives working display on the Samsung GT-I8190 (Golden) phone. It has also been tested working on the Samsung GT-S7710 (Skomer) phone. Signed-off-by: -
Linus Walleij authored
To make sure that the MCDE is in a reasonable state during set-up, perform a reset by power cycling the block by dropping the on-chip regulator reference after probe. The display subsystem (DSS) has no dedicated reset line so dropping the EPOD regulator is the only real way of resetting it. We introduce code to enable and disable the regulator in the display enable/disable callbacks. We move the generic MCDE setup such as muxing of DPI signals and masking of interrupts to the display handling. When we drop the power to the whole display subsystem, not only MCDE but also the DSI links lose their state. Therefore we move the DSI block reset and hardware initialization code to the mcde_dsi_bridge_pre_enable() callback so this happens every time we start up the bridge, as we may have lost the power. We move the final disablement of the interrupts and clocks to the mcde_dsi_bridge_post_disable() callback rather than have it in the mcde_dsi_bridge_disable() callback, as some control messages may still be sent over the DSI host after the bridge has been shut down. This (together with a patch for the corresponding panel) makes the Samsung GT-S7710 successfully disable and re-enable its display, cutting all power while disabled and re-initializing the hardware when coming back up. Acked-by:
-
Linus Walleij authored
It is possible to set a flag in the struct mipi_dsi_device so the panel is handled in low power (LP) mode. Some displays only support this mode and it is also good for testing. Signed-off-by:
-
Linus Walleij authored
The pixel fetcher FIFO depth was just hardcoded to 48 which works fine as long as the framebuffer is 32BPP and the DSI output is RGB888. We will need more elaborate handling for some buffer formats and displays, so start to improve this function by setting reasonable defaults for 32, 24 and 16 BPP framebuffers. Signed-off-by:
-
Linus Walleij authored
Revamp the way that the flow of data to the display is defined. I realized that the hardware supports something like 5 different modes of flow: oneshot, command with TE IRQ, command with BTA (bus turn around) and TE IRQ, video with TE IRQ and video without TE IRQ instead synchronizing to the output of the MCDE DSI formatter. Like before the selection of the type of flow is done from the DSI driver when we attach it to the MCDE and we get to know what the display wants. The new video mode synchronization method from the MCDE DSI formatter is used on some upstream devices such as Golden. This is the new default for video mode: stateless panels do not as a rule generate TE IRQs. Another semantic change is that we stop sending a TE request before every command when sending data to a display in command mode: this should only be explicitly requested when using BTA, according to the vendor driver. This has been tested and works fine with the command mode displays I have. (All that are supported upstream.) Reported-by:
-
Linus Walleij authored
The function mcde_display_send_one_frame() has a historical name that stems from being implemented when the driver only supported single frame updates. Rename it mcde_start_flow() so that it reflects the current usage. Signed-off-by:
-
Tian Tao authored
Add missing include to fix build error: hibmc_drm_drv.c:385:1: warning: data definition has no type or storage class [enabled by default] hibmc_drm_drv.c:385:1: error: type defaults to ‘int’ in declaration of ‘module_init’ [-Werror=implicit-int] hibmc_drm_drv.c:385:1: warning: parameter names (without types) in function of ‘module_exit’ [-Werror=implicit-int] hibmc_drm_drv.c:385:292:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1597289955-27381-1-git-send-email-tiantao6@hisilicon.com
-
- 12 Aug, 2020 9 commits
-
-
Marek Vasut authored
Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived from tc358764 driver and panel-raspberrypi-touchscreen. This driver is meant to replace the panel-raspberrypi-touchscreen too, as the bridge connection can be described in DT too. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: dri-devel@lists.freedesktop.org Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org Reviewed-by:
-
Marek Vasut authored
Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge, this one is used in the Raspberry Pi 7" touchscreen display unit. Signed-off-by:
-
Thomas Zimmermann authored
Backmerging drm-next into drm-misc-next for nouveau and panel updates. Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got renamed to struct ttm_resource. Signed-off-by: -
Christian König authored
The object flags created in radeon_ttm_placement_from_domain take care that we use the correct caching for AGP, this is just superflous. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/384336/?series=80346&rev=1
-
Christian König authored
This is a separate object we work within TTM. Signed-off-by:
-
Christian König authored
The names get/put are associated with reference counting in the Linux kernel, use alloc/free instead. Signed-off-by:
-
Tian Tao authored
The memory used to be allocated with devres helpers and released automatically. In rare circumstances, the memory's release could have happened before the DRM device got released, which would have caused memory corruption of some kind. Now we're embedding the data structures in struct hibmc_drm_private. The whole release problem has been resolved, because struct hibmc_drm_private is allocated with drmm_kzalloc and always released with the DRM device. Signed-off-by:
-
Tian Tao authored
Remove some unused include statements. Signed-off-by:
-
Christian König authored
This reverts commit 2ddef176. As it turned out VMWGFX needs a much wider audit to fix this. Signed-off-by:
-
