- 17 Nov, 2011 4 commits
-
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by:
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by:
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by:
-
- 16 Nov, 2011 32 commits
-
-
Matt Carlson authored
Translating between ethtool advertisement settings and MII advertisements are common operations for ethernet drivers. This patch adds a set of helper functions that implements the conversion. The patch then modifies a couple of the drivers to use the new functions. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
-
Jiri Pirko authored
Since multiple team instances are putting defined options into their option list, during register each option must be cloned before added into list. This resolves uncool memory corruptions when using multiple teams. Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
-
Jiri Pirko authored
No need to have spinlock for this purpose. So convert this to mutex and avoid current schedule while atomic problems in netlink code. Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Dan Carpenter authored
dev_queue_xmit() consumes its own skb, so the call to dev_kfree_skb() in lowpan_fragment_xmit() is a double free. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by:
-
Padmanabh Ratnakar authored
Use V1 version of query link status command for Lancer. Signed-off-by:
Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by:
-
Padmanabh Ratnakar authored
To enable VLAN promiscous mode, the HW interface should be created with VLAN promiscous capability in Lancer. Add this capability during creation of the HW interface. Signed-off-by:
-
Padmanabh Ratnakar authored
Implemented eeprom dump using ethtool feature for Lancer. Signed-off-by:
-
Padmanabh Ratnakar authored
Implement register dump using ethtool for Lancer. Signed-off-by:
-
Padmanabh Ratnakar authored
Lancer uses V1 version of TXQ create. This command needs interface id for TX queue creation. Rearrange code such that tx queue create is after interface create. As TXQ create is now called after MCC ring create use MCC instead of MBOX. Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Michał Mirosław authored
Only distinct use is checking if NETIF_F_NOCACHE_COPY should be enabled by default. The check heuristics is altered a bit here, so it hits other people than before. The default shouldn't be trusted for performance-critical cases anyway. For all other uses NETIF_F_NO_CSUM is equivalent to NETIF_F_HW_CSUM. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
v2: changed loop in ethtool_set_features() per Ben's suggestion Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
Define feature values by bit position instead of direct 2**i values and force the values to be of type netdev_features_t. Cleaned and extended from patch by Mahesh Bandewar <maheshb@google.com>: + added netdev_features_t casts + included bits under NETIF_F_GSO_MASK + moved feature #defines out of struct net_device definition Signed-off-by:
-
Michał Mirosław authored
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by:
-
Michał Mirosław authored
Move features definitions to separate header so that linux/skbuff.h won't need to include linux/netdevice.h after netdev_features_t is introduced. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Michał Mirosław authored
This is the only place left where dev->features are directly exposed to userspace. I know checkpatch.pl complains about __ethtool_{get,set}_flags(), but the code is easier to read this way. Signed-off-by: -
Michał Mirosław authored
As all drivers are converted, we may now remove discrete offload setting callback handling. Signed-off-by:
-
Rick Jones authored
Convert some remaining straglers' .get_drvinfo routines to use strlcpy rather than strcpy/strncpy. Signed-off-by:
Rick Jones <rick.jones2@hp.com> Signed-off-by:
-
Eric Dumazet authored
netstamp_needed seems a good candidate to jump_label conversion. This avoids 3 conditional branches per incoming packet in fast path. No measurable difference, given that these conditional branches are predicted on modern cpus. Only a small icache reduction, thanks to the unlikely() stuff. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Rick Jones authored
Add a new .bus_name to virtio_config_ops then modify virtio_net to call through to it in an ethtool .get_drvinfo routine to report bus_info in ethtool -i output which is consistent with other emulated NICs and the output of lspci. Signed-off-by:
-
Joe Perches authored
Use the normal #defines not module specific ones. Signed-off-by:
Stephen Ko <stephen.s.ko@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Joe Perches authored
printks should use KERN_ levels. Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Jeff Kirsher authored
Based on original patch from Joe Perches <joe@perches.com> Use the current logging styles. pr_<level> conversions are now prefixed with "igb: " Correct a defect where the trailing NTU may have been printed on a separate line because of an interleaving hex_dump. Remove unnecessary uses of KERN_CONT and use single pr_info()s to avoid any possible output interleaving from other modules. Coalesce formats as appropriate. -v2 fix-up to make checkpatch.pl compliant and remove change to the copyright line CC: Joe Perches <joe@perches.com> Signed-off-by: -
Jeff Kirsher authored
Based on the original patch from Joe Perches <joe@perches.com> Use the current logging styles, prefix output with "ixgbevf: " Add #define pr_fmt Coalesce formats. -v2 Fix-up to make checkpatch.pl compliant and remove change to copyright line CC: Joe Perches <joe@perches.com> Signed-off-by:Sibai Li <sibai.li@intel.com>
-
Jeff Kirsher authored
Based on the previous patch from Joe Perches <joe@perches.com> Use current logging styles. Prefix all output via #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Neaten link status dev_info. -v2 Remove Copyright changes and fix-up patch to make it checkpatch.pl compliant. CC: Joe Perches <joe@perches.com> Signed-off-by: -
Emil Tantilov authored
Previously the driver would force link without checking whether the link was already established. This caused some inconsistencies in the LED blink rate. Do not force link if link is already up. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
-
Jeff Kirsher authored
Based on the original patch from Joe Perches. Use the current logging styles. pr_<level> conversions are now prefixed with "e1000e:" Correct a couple of defects where the trailing NTU may have been printed on a separate line because of an interleaving hex_dump. Remove unnecessary uses of KERN_CONT and use single pr_info()s to avoid any possible output interleaving from other modules. Coalesce formats as appropriate. Remove an extra space from a broken across lines coalescing of "Link Status " and " Change". -v2 Remove changes to Copyright string CC: Joe Perches <joe@perches.com> Signed-off-by:
-
Jesse Brandeburg authored
Commit afc4b13d (net: remove use of ndo_set_multicast_list in drivers) changed e1000e to use the ndo_set_rx_mode entry point, but didn't implement the unicast address programming functionality. Implement it to achieve the ability to add unicast addresses. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
- 15 Nov, 2011 2 commits
-
-
Srinivas Kandagatla authored
This patch adds phy reset functionality to mdio-gpio driver. Now mdio_gpio_platform_data has new member as function pointer which can be filled at the bsp level for a callback from phy infrastructure. Also the mdio-bitbang driver fills-in the reset function of mii_bus structure. Without this patch the bsp level code has to takecare of the reseting PHY's on the bus, which become bit hacky for every bsp and phy-infrastructure is ignored aswell. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by:
-
Matti Vaittinen authored
This patch removes unnecessary NULL checks noticed by Dan Carpenter. Checks were introduced in commit 4a287eba to net-next. Signed-off-by:
Matti Vaittinen <Mazziesaccount@gmail.com> Signed-off-by:
-
- 14 Nov, 2011 2 commits
-
-
RongQing.Li authored
when dev_hard_header() failed, the newly allocated skb should be freed. Signed-off-by:
RongQing.Li <roy.qing.li@gmail.com> Signed-off-by:
-
Dmitry Kravkov authored
Reported-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
-
