- 24 Nov, 2010 17 commits
-
-
Luis R. Rodriguez authored
This should help with latency issues which can happen when using aggregation. Cc: Matt Smith <matt.smith@atheros.com> Cc: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
Since nullfunc frames are transmitted as unicast frames, they're more reliable than the broadcast probe requests, so we need fewer retries to figure out whether the AP is really gone. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Felix Fietkau authored
nullfunc frames are better for connection monitoring, because probe requests are answered even if the AP has already dropped the connection, whereas nullfunc frames from an unassociated station will trigger a disassoc/deauth frame from the AP (WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA), which allows the station to reconnect immediately instead of waiting until it attempts to transmit the next unicast frame. This only works on hardware with reliable tx ACK reporting, any other hardware needs to fall back to the probe request method. Signed-off-by:
-
Felix Fietkau authored
- store the multicast rate as an index instead of the rate value (reduces cpu overhead in a hotpath) - validate the rate values (must match a bitrate in at least one sband) Signed-off-by:
-
Felix Fietkau authored
Check the connection by probing the AP (either using nullfunc or a probe request). If nullfunc probing is supported and the assoc is no longer valid, the AP will send a disassoc/deauth immediately. Signed-off-by:
-
Felix Fietkau authored
Instead of using a fixed 2 second timeout, calculate beacon loss interval from the advertised beacon interval and a frame count. With this beacon loss happens after N (default 7) consecutive frames are missed which for a typical setup (100TU beacon interval) is ~700ms (or ~1/3 previous). Signed-off-by:
Sam Leffler <sleffler@chromium.org> Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
Paul Stewart <pstew@google.com> Signed-off-by:
-
Rafał Miłecki authored
Remove some typos, warnings, initialize some values to follow wl's code path. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Additional comment by Larry Finger <Larry.Finger@lwfinger.net>: This change deserves a bit more explanation. You might include something like "These tables came from reverse engineering the 5.10.56.46 version of the Broadcom driver. Trace comparisons between b43 and the current Broadcom driver (5.10.120.0) show byte reversals for the PHY register writes." Signed-off-by:
-
Joe Perches authored
No change in output for pr_<level> prefixes. netdev_<level> output is different, arguably improved. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
-
John W. Linville authored
This reverts commit 86107fd1. This patch inadvertantly changed the userland ABI. Signed-off-by:
-
- 23 Nov, 2010 1 commit
-
-
Guennadi Liakhovetski authored
Fix unbalanced call to sdio_release_host() on the error path. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: stable@kernel.org Signed-off-by:
-
- 22 Nov, 2010 22 commits
-
-
Felix Fietkau authored
wireless-testing commit a05b5d45 ath9k: add support for reading eeprom from platform data on PCI devices This change moved the initialization of the AH_USE_EEPROM flag from ath9k_hw to ath9k. This needs to be added to ath9k_htc as well Signed-off-by:
-
Felix Fietkau authored
Under load, a large number of frames can produce decryption errors, even when no key cache update is being done. Performing a key search for every single frame in an A-MPDU improves reliability. Signed-off-by:
-
Joe Perches authored
Mark arrays const that are unmodified after initializations. text data bss dec hex filename 19291 56 4136 23483 5bbb drivers/net/wireless/zd1211rw/zd_chip.o.old 19291 56 4136 23483 5bbb drivers/net/wireless/zd1211rw/zd_chip.o.new Signed-off-by:
-
Joe Perches authored
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 40197 56 8336 48589 bdcd drivers/net/wireless/rt2x00/rt2800lib.o.new 40205 56 8336 48597 bdd5 drivers/net/wireless/rt2x00/rt2800lib.o.old Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Joe Perches authored
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 41757 2205 9896 53858 d262 drivers/net/wireless/rndis_wlan.o.old 41653 2205 9880 53738 d1ea drivers/net/wireless/rndis_wlan.o.new Changed functions rndis_set_oid and set_bssid to take const *'s. Signed-off-by:
-
Joe Perches authored
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 42607 3581 8536 54724 d5c4 drivers/net/wireless/ray_cs.o.new 42603 3585 8536 54724 d5c4 drivers/net/wireless/ray_cs.o.old Signed-off-by:
-
Joe Perches authored
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 3650 56 704 4410 113a drivers/net/wireless/libertas/rx.o.new 3695 56 704 4455 1167 drivers/net/wireless/libertas/rx.o.old 27328 964 5240 33532 82fc drivers/net/wireless/libertas/cfg.o.new 27328 964 5240 33532 82fc drivers/net/wireless/libertas/cfg.o.old Signed-off-by:
-
Joe Perches authored
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 48644 57 12120 60821 ed95 drivers/net/wireless/b43/phy_n.o.new 48661 57 12120 60838 eda6 drivers/net/wireless/b43/phy_n.o.old 37906 86 7904 45896 b348 drivers/net/wireless/iwlwifi/iwl-agn-lib.o.new 37937 86 7904 45927 b367 drivers/net/wireless/iwlwifi/iwl-agn-lib.o.old 37781 523 6752 45056 b000 drivers/net/wireless/iwlwifi/iwl-3945.o.new 37781 523 6752 45056 b000 drivers/net/wireless/iwlwifi/iwl-3945.o.old Changed b43_nphy_write_clip_detection to take a const u16 * Signed-off-by:
-
Joe Perches authored
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 5502 56 1336 6894 1aee drivers/net/wireless/b43/phy_common.o.new 5511 56 1336 6903 1af7 drivers/net/wireless/b43/phy_common.o.old Signed-off-by:
-
Joe Perches authored
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 42578 720 8528 51826 ca72 drivers/net/wireless/atmel.o.old 42578 720 8528 51826 ca72 drivers/net/wireless/atmel.o.new Signed-off-by:
-
Joe Perches authored
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 1897 56 672 2625 a41 drivers/net/wireless/ath/carl9170/cmd.o.new 1897 56 672 2625 a41 drivers/net/wireless/ath/carl9170/cmd.o.old Signed-off-by:
-
Joe Perches authored
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 11161 56 2136 13353 3429 drivers/net/wireless/ath/ath9k/ar9003_paprd.o.new 11167 56 2136 13359 342f drivers/net/wireless/ath/ath9k/ar9003_paprd.o.old 15428 56 3056 18540 486c drivers/net/wireless/ath/ath9k/eeprom_4k.o.old 15451 56 3056 18563 4883 drivers/net/wireless/ath/ath9k/eeprom_4k.o.new 14087 56 2560 16703 413f drivers/net/wireless/ath/ath9k/eeprom_9287.o.old 14036 56 2560 16652 410c drivers/net/wireless/ath/ath9k/eeprom_9287.o.new 10041 56 2384 12481 30c1 drivers/net/wireless/ath/ath9k/ani.o.new 10088 56 2384 12528 30f0 drivers/net/wireless/ath/ath9k/ani.o.old 9316 1580 2304 13200 3390 drivers/net/wireless/ath/ath9k/htc_drv_init.o.new 9316 1580 2304 13200 3390 drivers/net/wireless/ath/ath9k/htc_drv_init.o.old 16483 56 3432 19971 4e03 drivers/net/wireless/ath/ath9k/ar9003_phy.o.new 16517 56 3432 20005 4e25 drivers/net/wireless/ath/ath9k/ar9003_phy.o.old 18221 104 2960 21285 5325 drivers/net/wireless/ath/ath9k/rc.o.old 18203 104 2960 21267 5313 drivers/net/wireless/ath/ath9k/rc.o.new 19985 56 4288 24329 5f09 drivers/net/wireless/ath/ath9k/eeprom_def.o.new 20040 56 4288 24384 5f40 drivers/net/wireless/ath/ath9k/eeprom_def.o.old 23997 56 4984 29037 716d drivers/net/wireless/ath/ath9k/ar5008_phy.o.old 23846 56 4984 28886 70d6 drivers/net/wireless/ath/ath9k/ar5008_phy.o.new 24285 56 3184 27525 6b85 drivers/net/wireless/ath/ath9k/ar9003_eeprom.o.old 24101 56 3184 27341 6acd drivers/net/wireless/ath/ath9k/ar9003_eeprom.o.new 6834 56 1032 7922 1ef2 drivers/net/wireless/ath/ath9k/ar9002_phy.o.old 6780 56 1032 7868 1ebc drivers/net/wireless/ath/ath9k/ar9002_phy.o.new 36211 64 8624 44899 af63 drivers/net/wireless/ath/ath9k/hw.o.new 36401 64 8624 45089 b021 drivers/net/wireless/ath/ath9k/hw.o.old 9281 56 1496 10833 2a51 drivers/net/wireless/ath/ath9k/ar9003_calib.o.old 9150 56 1496 10702 29ce drivers/net/wireless/ath/ath9k/ar9003_calib.o.new Use ARRAY_SIZE instead of a magic number. Signed-off-by:
-
Joe Perches authored
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 11266 56 2464 13786 35da drivers/net/wireless/ath/ath5k/ani.o.old 11181 56 2464 13701 3585 drivers/net/wireless/ath/ath5k/ani.o.new Signed-off-by:
-
Joe Perches authored
Mark an array const. Signed-off-by:
-
Christian Lamparter authored
The commit: "carl9170: tx path review" introduced a regression. gcc (with -Winit-self): tx.c:1264: warning: ‘super’ is used uninitialized in this function Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Huang Weiyi authored
Remove duplicated #include('s) in drivers/net/wireless/libertas/cfg.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Johannes Berg authored
If only 3945 is selected, and is a module, build fails because iwl-legacy.c won't be compiled. Fix this by adding it to the build correctly. This doesn't happen for 4965 because it is a bool option, not tristate, since it's built into the AGN module. Reported-by:
Randy Dunlap <randy.dunlap@oracle.com> Tested-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Helmut Schaa authored
When using AP VLAN interfaces, each VLAN interface should be in its own broadcast domain. Hostapd achieves this by assigning different GTKs to different AP VLAN interfaces. However, mac80211 drivers are not aware of AP VLAN interfaces and as such mac80211 sends the GTK to the driver in the context of the base AP mode interface. This causes problems when multiple AP VLAN interfaces are used since the driver will use the same key slot for the different GTKs (there's no way for the driver to distinguish the different GTKs from different AP VLAN interfaces). Thus, only the clients associated to one AP VLAN interface (the one that was created last) can actually use broadcast traffic. Fix this by not programming any GTKs for AP VLAN interfaces into the hw but fall back to using software crypto. The GTK for the underlying AP interface is still sent to the driver. That means, broadcast traffic to stations associated to an AP VLAN interface is encrypted in software whereas broadcast traffic to stations associated to the non-VLAN AP interface is encrypted in hardware. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Luis R. Rodriguez authored
When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by:Mark Mentovai <mark@moxienet.com> Signed-off-by:
Bruno Randolf <br1@einfach.org> Signed-off-by:
-
Luis R. Rodriguez authored
This will be required in the next patch and it makes the next patch easier to review. Signed-off-by:
-
Luis R. Rodriguez authored
These will be used earlier in the next few patches. Signed-off-by:
-
