- 26 Jul, 2019 40 commits
-
-
Eric W. Biederman authored
commit 70f1b0d3 upstream. The usb support for asyncio encoded one of it's values in the wrong field. It should have used si_value but instead used si_addr which is not present in the _rt union member of struct siginfo. The practical result of this is that on a 64bit big endian kernel when delivering a signal to a 32bit process the si_addr field is set to NULL, instead of the expected pointer value. This issue can not be fixed in copy_siginfo_to_user32 as the usb usage of the the _sigfault (aka si_addr) member of the siginfo union when SI_ASYNCIO is set is incompatible with the POSIX and glibc usage of the _rt member of the siginfo union. Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a dedicated function for this one specific case. There are no other users of kill_pid_info_as_cred so this specialization should have no impact on the amount of code in the kernel. Have kill_pid_usb_asyncio take instead of a siginfo_t which is difficult and error prone, 3 arguments, a signal number, an errno value, and an address enconded as a sigval_t. The encoding of the address as a sigval_t allows the code that reads the userspace request for a signal to handle this compat issue along with all of the other compat issues. Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place the pointer value at the in si_pid (instead of si_addr). That is the code now verifies that si_pid and si_addr always occur at the same location. Further the code veries that for native structures a value placed in si_pid and spilling into si_uid will appear in userspace in si_addr (on a byte by byte copy of siginfo or a field by field copy of siginfo). The code also verifies that for a 64bit kernel and a 32bit userspace the 32bit pointer will fit in si_pid. I have used the usbsig.c program below written by Alan Stern and slightly tweaked by me to run on a big endian machine to verify the issue exists (on sparc64) and to confirm the patch below fixes the issue. /* usbsig.c -- test USB async signal delivery */ #define _GNU_SOURCE #include <stdio.h> #include <fcntl.h> #include <signal.h> #include <string.h> #include <sys/ioctl.h> #include <unistd.h> #include <endian.h> #include <linux/usb/ch9.h> #include <linux/usbdevice_fs.h> static struct usbdevfs_urb urb; static struct usbdevfs_disconnectsignal ds; static volatile sig_atomic_t done = 0; void urb_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &urb); printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad"); } void ds_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &ds); printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad"); done = 1; } int main(int argc, char **argv) { char *devfilename; int fd; int rc; struct sigaction act; struct usb_ctrlrequest *req; void *ptr; char buf[80]; if (argc != 2) { fprintf(stderr, "Usage: usbsig device-file-name\n"); return 1; } devfilename = argv[1]; fd = open(devfilename, O_RDWR); if (fd == -1) { perror("Error opening device file"); return 1; } act.sa_sigaction = urb_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR1, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } act.sa_sigaction = ds_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR2, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } memset(&urb, 0, sizeof(urb)); urb.type = USBDEVFS_URB_TYPE_CONTROL; urb.endpoint = USB_DIR_IN | 0; urb.buffer = buf; urb.buffer_length = sizeof(buf); urb.signr = SIGUSR1; req = (struct usb_ctrlrequest *) buf; req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE; req->bRequest = USB_REQ_GET_DESCRIPTOR; req->wValue = htole16(USB_DT_DEVICE << 8); req->wIndex = htole16(0); req->wLength = htole16(sizeof(buf) - sizeof(*req)); rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb); if (rc == -1) { perror("Error in SUBMITURB ioctl"); return 1; } rc = ioctl(fd, USBDEVFS_REAPURB, &ptr); if (rc == -1) { perror("Error in REAPURB ioctl"); return 1; } memset(&ds, 0, sizeof(ds)); ds.signr = SIGUSR2; ds.context = &ds; rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds); if (rc == -1) { perror("Error in DISCSIGNAL ioctl"); return 1; } printf("Waiting for usb disconnect\n"); while (!done) { sleep(1); } close(fd); return 0; } Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.com> Fixes: v2.3.39 Cc: stable@vger.kernel.org Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Julien Thierry authored
commit f5706578 upstream. Some of the inline assembly instruction use the condition flags and need to include "cc" in the clobber list. Fixes: 4a503217 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking") Cc: <stable@vger.kernel.org> # 5.1.x- Suggested-by:
Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Julien Thierry <julien.thierry@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Jon Hunter authored
commit ba24eee6 upstream. The Tegra AGIC interrupt controller is an ARM GIC400 interrupt controller. Per the ARM GIC device-tree binding, the first address region is for the GIC distributor registers and the second address region is for the GIC CPU interface registers. The address space for the distributor registers is 4kB, but currently this is incorrectly defined as 8kB for the Tegra AGIC and overlaps with the CPU interface registers. Correct the address space for the distributor to be 4kB. Cc: stable@vger.kernel.org Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Fixes: bcdbde43 ("arm64: tegra: Add AGIC node for Tegra210") Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Like Xu authored
commit 6fc3977c upstream. If a perf_event creation fails due to any reason of the host perf subsystem, it has no chance to log the corresponding event for guest which may cause abnormal sampling data in guest result. In debug mode, this message helps to understand the state of vPMC and we may not limit the number of occurrences but not in a spamming style. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Like Xu <like.xu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Michael Neuling authored
commit 3fefd1cd upstream. When emulating tsr, treclaim and trechkpt, we incorrectly set CR0. The code currently sets: CR0 <- 00 || MSR[TS] but according to the ISA it should be: CR0 <- 0 || MSR[TS] || 0 This fixes the bit shift to put the bits in the correct location. This is a data integrity issue as CR0 is corrupted. Fixes: 4bb3c7a0 ("KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9") Cc: stable@vger.kernel.org # v4.17+ Tested-by:
Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Suraj Jitindar Singh authored
commit 3c25ab35 upstream. If we enter an L1 guest with a pending decrementer exception then this is cleared on guest exit if the guest has writtien a positive value into the decrementer (indicating that it handled the decrementer exception) since there is no other way to detect that the guest has handled the pending exception and that it should be dequeued. In the event that the L1 guest tries to run a nested (L2) guest immediately after this and the L2 guest decrementer is negative (which is loaded by L1 before making the H_ENTER_NESTED hcall), then the pending decrementer exception isn't cleared and the L2 entry is blocked since L1 has a pending exception, even though L1 may have already handled the exception and written a positive value for it's decrementer. This results in a loop of L1 trying to enter the L2 guest and L0 blocking the entry since L1 has an interrupt pending with the outcome being that L2 never gets to run and hangs. Fix this by clearing any pending decrementer exceptions when L1 makes the H_ENTER_NESTED hcall since it won't do this if it's decrementer has gone negative, and anyway it's decrementer has been communicated to L0 in the hdec_expires field and L0 will return control to L1 when this goes negative by delivering an H_DECREMENTER exception. Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by:
-
Suraj Jitindar Singh authored
commit 86953770 upstream. On POWER9 the decrementer can operate in large decrementer mode where the decrementer is 56 bits and signed extended to 64 bits. When not operating in this mode the decrementer behaves as a 32 bit decrementer which is NOT signed extended (as on POWER8). Currently when reading a guest decrementer value we don't take into account whether the large decrementer is enabled or not, and this means the value will be incorrect when the guest is not using the large decrementer. Fix this by sign extending the value read when the guest isn't using the large decrementer. Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by:
-
Wanpeng Li authored
commit 4d763b16 upstream. Raise #GP when guest read/write IA32_XSS, but the CPUID bits say that it shouldn't exist. Fixes: 20300099 (kvm: vmx: add MSR logic for XSAVES) Reported-by:
Xiaoyao Li <xiaoyao.li@linux.intel.com> Reported-by:
Tao Xu <tao3.xu@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
-
Sean Christopherson authored
commit beb8d93b upstream. A previous fix to prevent KVM from consuming stale VMCS state after a failed VM-Entry inadvertantly blocked KVM's handling of machine checks that occur during VM-Entry. Per Intel's SDM, a #MC during VM-Entry is handled in one of three ways, depending on when the #MC is recognoized. As it pertains to this bug fix, the third case explicitly states EXIT_REASON_MCE_DURING_VMENTRY is handled like any other VM-Exit during VM-Entry, i.e. sets bit 31 to indicate the VM-Entry failed. If a machine-check event occurs during a VM entry, one of the following occurs: - The machine-check event is handled as if it occurred before the VM entry: ... - The machine-check event is handled after VM entry completes: ... - A VM-entry failure occurs as described in Section 26.7. The basic exit reason is 41, for "VM-entry failure due to machine-check event". Explicitly handle EXIT_REASON_MCE_DURING_VMENTRY as a one-off case in vmx_vcpu_run() instead of binning it into vmx_complete_atomic_exit(). Doing so allows vmx_vcpu_run() to handle VMX_EXIT_REASONS_FAILED_VMENTRY in a sane fashion and also simplifies vmx_complete_atomic_exit() since VMCS.VM_EXIT_INTR_INFO is guaranteed to be fresh. Fixes: b060ca3b ("kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
Sean Christopherson authored
commit 3b013a29 upstream. If L1 does not set VM_ENTRY_LOAD_BNDCFGS, then L1's BNDCFGS value must be propagated to vmcs02 since KVM always runs with VM_ENTRY_LOAD_BNDCFGS when MPX is supported. Because the value effectively comes from vmcs01, vmcs02 must be updated even if vmcs12 is clean. Fixes: 62cf9bd8 ("KVM: nVMX: Fix emulation of VM_ENTRY_LOAD_BNDCFGS") Cc: stable@vger.kernel.org Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
Sean Christopherson authored
commit 73cb8556 upstream. ... as a malicious userspace can run a toy guest to generate invalid virtual-APIC page addresses in L1, i.e. flood the kernel log with error messages. Fixes: 69090810 ("KVM: nVMX: allow tests to use bad virtual-APIC page address") Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sakari Ailus authored
commit 14f28f5c upstream. buf->size is an unsigned long; casting that to int will lead to an overflow if buf->size exceeds INT_MAX. Fix this by changing the type to unsigned long instead. This is possible as the buf->size is always aligned to PAGE_SIZE, and therefore the size will never have values lesser than 0. Note on backporting to stable: the file used to be under drivers/media/v4l2-core, it was moved to the current location after 4.14. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Sakari Ailus authored
commit defcdc5d upstream. PAGE_ALIGN() may wrap the buffer size around to 0. Prevent this by checking that the aligned value is not smaller than the unaligned one. Note on backporting to stable: the file used to be under drivers/media/v4l2-core, it was moved to the current location after 4.14. Signed-off-by:
-
Ezequiel Garcia authored
commit 766b9b16 upstream. The mutex unlock in the threaded interrupt handler is not paired with any mutex lock. Remove it. This bug has been here for a really long time, so it applies to any stable repo. Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Boris Brezillon authored
commit 07d89227 upstream. cfg->type can be overridden by v4l2_ctrl_fill() and the new value is stored in the local type var. Fix the tests to use this local var. Fixes: 0996517c ("V4L/DVB: v4l2: Add new control handling framework") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> [hverkuil-cisco@xs4all.nl: change to !qmenu and !qmenu_int (checkpatch)] Signed-off-by:
-
Luis Henriques authored
commit d31d07b9 upstream. Commit e450f4d1 ("ceph: pass inclusive lend parameter to filemap_write_and_wait_range()") fixed the end offset parameter used to call filemap_write_and_wait_range and invalidate_inode_pages2_range. Unfortunately it missed truncate_inode_pages_range, introducing a regression that is easily detected by xfstest generic/130. The problem is that when doing direct IO it is possible that an extra page is truncated from the page cache when the end offset is page aligned. This can cause data loss if that page hasn't been sync'ed to the OSDs. While there, change code to use PAGE_ALIGN macro instead. Cc: stable@vger.kernel.org Fixes: e450f4d1 ("ceph: pass inclusive lend parameter to filemap_write_and_wait_range()") Signed-off-by:
Luis Henriques <lhenriques@suse.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 3140aafb upstream. The recent fix for Icelake HDMI codec introduced the mapping from pin NID to the i915 gfx port number. However, it forgot the reverse mapping from the port number to the pin NID that is used in the ELD notifier callback. As a result, it's processed to a wrong widget and gives a warning like snd_hda_codec_hdmi hdaudioC0D2: HDMI: pin nid 5 not registered This patch corrects it with a proper reverse mapping function. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204133 Fixes: b0d8bc50 ("ALSA: hda: hdmi - add Icelake support") Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit eb417711 upstream. INTEL_GET_VENDOR_VERB is defined twice identically. Let's remove a superfluous line. Fixes: b0d8bc50 ("ALSA: hda: hdmi - add Icelake support") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hui Wang authored
commit 4b4e0e32 upstream. Without this patch, the headset-mic and headphone-mic don't work. Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Kailang Yang authored
commit fbc57129 upstream. It assigned to wrong model. So, The headphone Mic can't work. Fixes: 3f640970 ("ALSA: hda - Fix headset mic detection problem for several Dell laptops") Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 4914da2f upstream. We apply the codec resume forcibly at system resume callback for updating and syncing the jack detection state that may have changed during sleeping. This is, however, superfluous for the codec like Intel HDMI/DP, where the jack detection is managed via the audio component notification; i.e. the jack state change shall be reported sooner or later from the graphics side at mode change. This patch changes the codec resume callback to avoid the forcible resume conditionally with a new flag, codec->relaxed_resume, for reducing the resume time. The flag is set in the codec probe. Although this doesn't fix the entire bug mentioned in the bugzilla entry below, it's still a good optimization and some improvements are seen. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201901 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit ede34f39 upstream. The fix for the racy writes and ioctls to sequencer widened the application of client->ioctl_mutex to the whole write loop. Although it does unlock/relock for the lengthy operation like the event dup, the loop keeps the ioctl_mutex for the whole time in other situations. This may take quite long time if the user-space would give a huge buffer, and this is a likely cause of some weird behavior spotted by syzcaller fuzzer. This patch puts a simple workaround, just adding a mutex break in the loop when a large number of events have been processed. This shouldn't hit any performance drop because the threshold is set high enough for usual operations. Fixes: 7bd80091 ("ALSA: seq: More protection for concurrent write and ioctl races") Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Xiao Ni authored
commit d9771f5e upstream. commit d5d885fd ("md: introduce new personality funciton start()") splits the init job to two parts. The first part run() does the jobs that do not require the md threads. The second part start() does the jobs that require the md threads. Now it just does run() in adding new journal device. It needs to do the second part start() too. Fixes: d5d885fd ("md: introduce new personality funciton start()") Cc: stable@vger.kernel.org #v4.9+ Reported-by:
Michal Soltys <soltys@ziu.info> Signed-off-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Mark Brown authored
commit c2c928c9 upstream. Back in ff9fb72b (debugfs: return error values, not NULL) the debugfs APIs were changed to return error pointers rather than NULL pointers on error, breaking the error checking in ASoC. Update the code to use IS_ERR() and log the codes that are returned as part of the error messages. Fixes: ff9fb72b (debugfs: return error values, not NULL) Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Mark Brown authored
commit ceaea851 upstream. Back in ff9fb72b (debugfs: return error values, not NULL) the debugfs APIs were changed to return error pointers rather than NULL pointers on error, breaking the error checking in ASoC. Update the code to use IS_ERR() and log the codes that are returned as part of the error messages. Fixes: ff9fb72b (debugfs: return error values, not NULL) Signed-off-by:
-
Christophe Leroy authored
commit aeb87246 upstream. All mapping iterator logic is based on the assumption that sg->offset is always lower than PAGE_SIZE. But there are situations where sg->offset is such that the SG item is on the second page. In that case sg_copy_to_buffer() fails properly copying the data into the buffer. One of the reason is that the data will be outside the kmapped area used to access that data. This patch fixes the issue by adjusting the mapping iterator offset and pgoffset fields such that offset is always lower than PAGE_SIZE. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 4225fc85 ("lib/scatterlist: use page iterator in the mapping iterator") Cc: stable@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Trond Myklebust authored
commit 75369089 upstream. The bvec tracks the list of pages, so if the number of pages changes due to a re-encode, we need to reset the bvec as well. Fixes: 277e4ab7 ("SUNRPC: Simplify TCP receive code by switching...") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.20+ Signed-off-by:
-
Trond Myklebust authored
commit 58bbeab4 upstream. If the client has to stop in pnfs_update_layout() to wait for another layoutget to complete, it currently exits and defaults to I/O through the MDS if the layoutget was successful. Fixes: d03360aa ("pNFS: Ensure we return the error if someone kills...") Signed-off-by:
-
Trond Myklebust authored
commit 8e04fdfa upstream. mirror->mirror_ds can be NULL if uninitialised, but can contain a PTR_ERR() if call to GETDEVICEINFO failed. Fixes: 65990d1a ("pNFS/flexfiles: Fix a deadlock on LAYOUTGET") Signed-off-by:
-
Max Kellermann authored
commit db531db9 upstream. This reverts commit be4c2d47. That commit caused a severe memory leak in nfs_readdir_make_qstr(). When listing a directory with more than 100 files (this is how many struct nfs_cache_array_entry elements fit in one 4kB page), all allocated file name strings past those 100 leak. The root of the leakage is that those string pointers are managed in pages which are never linked into the page cache. fs/nfs/dir.c puts pages into the page cache by calling read_cache_page(); the callback function nfs_readdir_filler() will then fill the given page struct which was passed to it, which is already linked in the page cache (by do_read_cache_page() calling add_to_page_cache_lru()). Commit be4c2d47 added another (local) array of allocated pages, to be filled with more data, instead of discarding excess items received from the NFS server. Those additional pages can be used by the next nfs_readdir_filler() call (from within the same nfs_readdir() call). The leak happens when some of those additional pages are never used (copied to the page cache using copy_highpage()). The pages will be freed by nfs_readdir_free_pages(), but their contents will not. The commit did not invoke nfs_readdir_clear_array() (and doing so would have been dangerous, because it did not track which of those pages were already copied to the page cache, risking double free bugs). How to reproduce the leak: - Use a kernel with CONFIG_SLUB_DEBUG_ON. - Create a directory on a NFS mount with more than 100 files with names long enough to use the "kmalloc-32" slab (so we can easily look up the allocation counts): for i in `seq 110`; do touch ${i}_0123456789abcdef; done - Drop all caches: echo 3 >/proc/sys/vm/drop_caches - Check the allocation counter: grep nfs_readdir /sys/kernel/slab/kmalloc-32/alloc_calls 30564391 nfs_readdir_add_to_array+0x73/0xd0 age=534558/4791307/6540952 pid=370-1048386 cpus=0-47 nodes=0-1 - Request a directory listing and check the allocation counters again: ls [...] grep nfs_readdir /sys/kernel/slab/kmalloc-32/alloc_calls 30564511 nfs_readdir_add_to_array+0x73/0xd0 age=207/4792999/6542663 pid=370-1048386 cpus=0-47 nodes=0-1 There are now 120 new allocations. - Drop all caches and check the counters again: echo 3 >/proc/sys/vm/drop_caches grep nfs_readdir /sys/kernel/slab/kmalloc-32/alloc_calls 30564401 nfs_readdir_add_to_array+0x73/0xd0 age=735/4793524/6543176 pid=370-1048386 cpus=0-47 nodes=0-1 110 allocations are gone, but 10 have leaked and will never be freed. Unhelpfully, those allocations are explicitly excluded from KMEMLEAK, that's why my initial attempts with KMEMLEAK were not successful: /* * Avoid a kmemleak false positive. The pointer to the name is stored * in a page cache page which kmemleak does not scan. */ kmemleak_not_leak(string->name); It would be possible to solve this bug without reverting the whole commit: - keep track of which pages were not used, and call nfs_readdir_clear_array() on them, or - manually link those pages into the page cache But for now I have decided to just revert the commit, because the real fix would require complex considerations, risking more dangerous (crash) bugs, which may seem unsuitable for the stable branches. Signed-off-by:
Max Kellermann <mk@cm4all.com> Cc: stable@vger.kernel.org # v5.1+ Signed-off-by:
-
Trond Myklebust authored
commit 44942b4e upstream. According to the open() manpage, Linux reserves the access mode 3 to mean "check for read and write permission on the file and return a file descriptor that can't be used for reading or writing." Currently, the NFSv4 code will ask the server to open the file, and will use an incorrect share access mode of 0. Since it has an incorrect share access mode, the client later forgets to send a corresponding close, meaning it can leak stateids on the server. Fixes: ce4ef7c0 ("NFS: Split out NFS v4 file operations") Cc: stable@vger.kernel.org # 3.6+ Signed-off-by:
-
Julien Thierry authored
commit 17ce302f upstream. In the presence of any form of instrumentation, nmi_enter() should be done before calling any traceable code and any instrumentation code. Currently, nmi_enter() is done in handle_domain_nmi(), which is much too late as instrumentation code might get called before. Move the nmi_enter/exit() calls to the arch IRQ vector handler. On arm64, it is not possible to know if the IRQ vector handler was called because of an NMI before acknowledging the interrupt. However, It is possible to know whether normal interrupts could be taken in the interrupted context (i.e. if taking an NMI in that context could introduce a potential race condition). When interrupting a context with IRQs disabled, call nmi_enter() as soon as possible. In contexts with IRQs enabled, defer this to the interrupt controller, which is in a better position to know if an interrupt taken is an NMI. Fixes: bc3c03cc ("arm64: Enable the support of pseudo-NMIs") Cc: <stable@vger.kernel.org> # 5.1.x- Cc: Will Deacon <will.deacon@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by:
-
Dmitry Osipenko authored
commit 560d1bca upstream. _set_opp_custom() receives a set of OPP supplies as its arguments and the caller of it passes NULL when the supplies are not valid. But _set_opp_custom(), by mistake, checks for error by performing IS_ERR(old_supply) on it which will always evaluate to false. The problem was spotted during of testing of upcoming update for the NVIDIA Tegra CPUFreq driver. Cc: stable <stable@vger.kernel.org> Fixes: 7e535993 ("OPP: Separate out custom OPP handler specific code") Reported-by:
Marc Dietrich <marvin24@gmx.de> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> [ Viresh: Massaged changelog ] Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Emmanuel Grumbach authored
commit 94022562 upstream. Otherwise it'll stay set forever which is clearly buggy. Cc: stable@vger.kernel.org Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Johannes Berg authored
commit c56e00a3 upstream. In AP (and IBSS) mode, we can only set GTKs to firmware after we have sent down the multicast station, but this we can only do after we've enabled beaconing, etc. However, during rfkill exit, hostapd will configure the keys before starting the AP, and cfg80211/mac80211 accept it happily. On earlier devices, this didn't bother us as GTK TX wasn't really handled in firmware, we just put the key material into the TX cmd and thus it only mattered when we actually transmitted a frame. On newer devices, however, the firmware needs to track all of this and that doesn't work if we add the key before the (multicast) sta it belongs to. To fix this, keep a list of keys to add during AP enable, and call the function there. Cc: stable@vger.kernel.org Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit ed3e4c6d upstream. Newest devices have a new firmware load mechanism. This mechanism is called the context info. It means that the driver doesn't need to load the sections of the firmware. The driver rather prepares a place in DRAM, with pointers to the relevant sections of the firmware, and the firmware loads itself. At the end of the process, the firmware sends the ALIVE interrupt. This is different from the previous scheme in which the driver expected the FH_TX interrupt after each section being transferred over the DMA. In order to support this new flow, we enabled all the interrupts. This broke the assumption that we have in the code that the RF-Kill interrupt can't interrupt the firmware load flow. Change the context info flow to enable only the ALIVE interrupt, and re-enable all the other interrupts only after the firmware is alive. Then, we won't see the RF-Kill interrupt until then. Getting the RF-Kill interrupt while loading the firmware made us kill the firmware while it is loading and we ended up dumping garbage instead of the firmware state. Re-enable the ALIVE | RX interrupts from the ISR when we get the ALIVE interrupt to be able to get the RX interrupt that comes immediately afterwards for the ALIVE notification. This is needed for non MSI-X only. Cc: stable@vger.kernel.org Signed-off-by:
-
Emmanuel Grumbach authored
commit 0d53cfd0 upstream. iwl_mvm_send_cmd returns 0 when the command won't be sent because RF-Kill is asserted. Do the same when we call iwl_get_shared_mem_conf since it is not sent through iwl_mvm_send_cmd but directly calls the transport layer. Cc: stable@vger.kernel.org Signed-off-by:
-
Emmanuel Grumbach authored
commit ec46ae30 upstream. We added code to restock the buffer upon ALIVE interrupt when MSI-X is disabled. This was added as part of the context info code. This code was added only if the ISR debug level is set which is very unlikely to be related. Move this code to run even when the ISR debug level is not set. Note that gen2 devices work with MSI-X in most cases so that this path is seldom used. Cc: stable@vger.kernel.org Signed-off-by:
-
Emmanuel Grumbach authored
commit 3b57a10c upstream. Sometimes the register status can include interrupts that were masked. We can, for example, get the RF-Kill bit set in the interrupt status register although this interrupt was masked. Then if we get the ALIVE interrupt (for example) that was not masked, we need to *not* service the RF-Kill interrupt. Fix this in the MSI-X interrupt handler. Cc: stable@vger.kernel.org Signed-off-by:
-
Oren Givon authored
commit 498d3eb5 upstream. The 22000 series FW that was meant to be used with hr is also the FW that is used for hr1 and has a different RF ID. Add support to load the hr FW when hr1 RF ID is detected. Cc: stable@vger.kernel.org # 5.1+ Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
