- 29 Sep, 2020 5 commits
-
-
Michał Mirosław authored
Document new properties for IBAT compensation feature. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com>
-
Michał Mirosław authored
Add configuration for compensation of IBAT measuring resistor in series with the battery. Signed-off-by:
-
Wang Qing authored
Modify the comment typo: "compliment" -> "complement". Signed-off-by:
Wang Qing <wangqing@vivo.com> Signed-off-by:
-
Artur Rojek authored
This binding can support Ingenic JZ4725B and JZ4770 SoCs, as they are compatible with Ingenic JZ4740 battery. Introduce the following compatible property combinations: compatible = "ingenic,jz4725b-battery", "ingenic,jz4740-battery", compatible = "ingenic,jz4770-battery", "ingenic,jz4740-battery" Signed-off-by:
Artur Rojek <contact@artur-rojek.eu> Reviewed-by:
-
Artur Rojek authored
Convert the textual documentation of Device Tree bindings for the Ingenic JZ47xx SoCs battery to YAML. Signed-off-by:
-
- 28 Aug, 2020 14 commits
-
-
Jonathan Bakker authored
The bindings for charger-manager were very unclear and didn't specify allowable values in many cases. Clean these up to show what each value does and make sure all properties are documented here rather than using wildcards. Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Acked-by:
-
Jonathan Bakker authored
Rather than having a cm-chargers and a separate cm-num-chargers property, simply count the entries in cm-chargers. Signed-off-by:
-
Jonathan Bakker authored
In commit 830ae442 ("extcon: Remove the deprecated extcon functions") the function extcon_register_interest became a no-op returning an error, leading to non-functional behaviour in charger-manager. Additionally, a translation table is needed between the text representation of the extcon cable names and their IDs is needed. In order to retain DT compatibility, TA and CHARGE-DOWNSTREAM are added as they were present up until commit 11eecf91 ("extcon: Modify the id and name of external connector") Signed-off-by:
-
Jonghwa Lee authored
Prevents direct charging control in cable notification and only set the input current limit according to cable type. Leave the enabling of charing to cm_monitor() where charging management proceeds. We may lose a few ms to enable charging compared to before, but it's more important that charging is enabled always in safe context. Signed-off-by:
Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Jonghwa Lee authored
cm_monitor(), where charging management starts, checks various charging condition sequentially to decide next charging operation. However, as it follows sequential process, cascaded if statements, it does some jobs which have already done in the previous stage. This results in a delay in decision making. Moreover, starting point of charging is spread all around which makes maintain code and debugging difficult. Both of the problems mentioned above become clean if it manages battery charging focusing on battery status not following sequential condition checking. Now, cm_monitor() moves battery state diagram and does the optimal operation for current state. As a result, it reduces whole monitoring time almost in half. Signed-off-by:
-
Jonghwa Lee authored
Current charger-manager calls power_supply_changed() whenever charging status is changed. Remove the separated power_supply_changed() calls and let it be called at end of try_charger_enable() function which is called to set charging/discharging. Signed-off-by:
-
Jonghwa Lee authored
The POWER_SUPPLY_CHARGE_NOW/FULL property reflects battery's charges in uAh unit, but charger-manager has been used it wrongly as a status field. Signed-off-by:
-
Jonathan Bakker authored
We were using POWER_SUPPLY_PROP_TEMP if the temperature was coming via the fuel gauge and POWER_SUPPLY_PROP_TEMP_AMBIENT if it was coming via the thermal framework. Since they're mutually exclusive in the driver and we don't know if the thermal framework is ambient or not, unify them both to use POWER_SUPPLY_PROP_TEMP. Signed-off-by:
-
Jonghwa Lee authored
cm_notify_event() was introduced to get an event associated with the battery status externally (ie in board files), but no one ever used it. Moreover it makes charger manager driver more complicated. Drop the function and all data related to it to simplify the driver. Signed-off-by:
-
Jonghwa Lee authored
Whenever the battery status is changed, charger manager triggers a uevent through a private interface. Modify it to use power_supply_changed() since it belongs to the power supply subsystem. Signed-off-by:
-
Andreas Kemnade authored
Both chips have charger and a fuel gauge. This adds basic support for displaying the state of the battery and the input power, settings are not modified. There are some defaults set via OTP. Charging also starts after plugging USB. Known issues of the fuel gauge: There are drivers in the wild which disable the fuel gauge at shutdown. If a kernel is booted without fuel gauge support, after such a driver has been used, the fuel gauge will stay off and decalibrate. If this driver is used after that, it might display wrong values for charge level. Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Signed-off-by:
-
Ikjoon Jang authored
Current sbs-battery considers all smbus errors as disconnection events when battery-detect pin isn't supplied, and restored to present state back when any successful transaction is made. This can lead to unwanted state changes between present and !present when there's one i2c error and other following commands were successful. This patch provides a unified way of checking presence by calling sbs_get_battery_presence_and_health() when detect pin is not used. Signed-off-by:
Ikjoon Jang <ikjn@chromium.org> Signed-off-by:
-
Sebastian Reichel authored
Simplify the driver and remove the DT specific code by using the generic device property framework. Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Tested-by:
-
Sebastian Reichel authored
There are no platforms using the pdata support, so let's drop it to simplify the driver. Reviewed-by:
-
- 27 Aug, 2020 7 commits
-
-
Dan Murphy authored
Update the license to the SPDX licensing format. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_dbg message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Ikjoon Jang authored
This patch enables calling sbs_get_battery_presence_and_health() without checking its chip type. No functional changes. Signed-off-by:
-
Ikjoon Jang authored
Remove unused enable_detection flag which is always true after the device is proved. Signed-off-by:
-
Sebastian Reichel authored
Add new charge-current-limit feature to gpio-charger. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sebastian Reichel authored
Immutable branch between arm and power-supply for gpio-charger for 5.10 This immutable branch drops legacy gpio API from gpio-charger and updates the remaining users to the new gpiod API instead. Signed-off-by:Sebastian Reichel <sre@kernel.org>
-
Linus Walleij authored
This converts the GPIO charger to use exclusively GPIO descriptors, moving the two remaining platforms passing global GPIO numbers over to using a GPIO descriptor table. Signed-off-by:
-
- 26 Aug, 2020 8 commits
-
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
David Lechner <david@lechnology.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Subbaraman Narayanamurthy authored
Currently, power_supply framework supports only Battery, UPS, Mains and USB power_supply_type. Add wireless power_supply_type so that the drivers which supports wireless can register a power supply class device with POWER_SUPPLY_TYPE_WIRELESS. Signed-off-by:
Subbaraman Narayanamurthy <subbaram@codeaurora.org> Signed-off-by:
Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by:
-
Dmitry Osipenko authored
Let's simply disable/enable IRQ rather than use a mutex that protects from racing with the interrupt handler. The result of this patch is that it's a bit easier now to follow the driver's code. Tested-by:
David Heidelberg <david@ixit.cz> Signed-off-by:
-
David Heidelberg authored
SMB347 is a charger and not a battery driver. Secondly, power-supply core now supports monitored-battery. So the 'fake' battery doesn't do anything useful for us, and thus, it should be removed. Transfer smb347-battery functionality into smb347-mains and smb347-usb. Reviewed-by:
-
- 25 Aug, 2020 6 commits
-
-
David Heidelberg authored
SMB345 tested on Nexus 7 2013. Based on: - https://patchwork.kernel.org/patch/4922431/ - https://patchwork.ozlabs.org/patch/666877/Signed-off-by:
-
David Heidelberg authored
This patch adds device-tree support to the SMB347 charger driver. All legacy platform data now can be parsed from DT. Because of that and since SMB347 is an I2C client driver, the IRQ number can be passed automatically through client's IRQ variable if it's defined in DT. There is no need to map GPIO to IRQ manually in the case of DT. This patch is based on the original work made by: Jonghwa Lee <jonghwa3.lee@samsung.com> Link: https://patchwork.kernel.org/patch/4284731/Signed-off-by:
-
Dmitry Osipenko authored
The generic battery temperature properties are already supported by the power-supply core. Let's support parsing of the common battery temperature properties from a device-tree. Signed-off-by:
-
David Heidelberg authored
Summit SMB3xx series is a Programmable Switching Li+ Battery Charger. This patch adds device-tree binding for Summit SMB345, SMB347 and SMB358 chargers. Signed-off-by:
-
Dmitry Osipenko authored
Document generic battery temperature properties. Signed-off-by:
-
David Heidelberg authored
Simplify code, more convenient to use with Device Tree. Reviewed-by:
-
