From: Matt Porter <mporter@kernel.crashing.org>

New OCP infrastructure ported from 2.4 along with several enhancements. 
Updated patch with comments from hch and Valdis.

From: Matt Porter <mporter@kernel.crashing.org>

Adds general Book E machine check exception support and PPC44x-specific
machine check exception implementation.

From: Matt Porter <mporter@kernel.crashing.org>

Adds general Book E debug exception support and PPC44x-specific debug
exception implementation.

From: Matt Porter <mporter@kernel.crashing.org>

This patch fixes the condition where prefetching cache lines beyond a
buffer can cause data corruption on non cache coherent PPCs.  It is a port
of the version that went into 2.4.  From Eugene Surovegin
<ebs@ebshome.net>.

From: Matt Porter <mporter@kernel.crashing.org>

This patch implements/uses __flush_dcache_icache_page() which kmaps on a
Book E part, but keeps the existing behavior on other PowerPCs which can
disable the MMU.

From: Olaf Hering <olh@suse.de>

ext3 as module is not possible in 2.6.6, clear_pages, called from clear_page,
is not exported.

Also, unexport clear_page(), which is an inline.

Jorn Engel <joern@wohnheim.fh-wedel.de>

inode->i_flags should never contain fs-specific flags.  In fact, it doesn't;
the checks against it cause "chattr +T" to be useless for ext[23].  Same bug
was in befs as well.

From: "Sergey S. Kostyliov" <rathamahata@php4.ru>

Acked by Will Dyson.

From: "Sergey S. Kostyliov" <rathamahata@php4.ru>

- Reduce stack usage.
- Kill useless duplication of error and warning messages when debug is on. Old
	behaviour was:
...
BeFS(hda1): 

From: "Sergey S. Kostyliov" <rathamahata@php4.ru>

Fix really old typo in config help

From: "Sergey S. Kostyliov" <rathamahata@php4.ru>

Move value initialisation out of the loop body.

From: "Sergey S. Kostyliov" <rathamahata@php4.ru>

We already have block number (inode->i_ino), so there is no need to calculate
it from befs_block_run before sb_bread() call (this is what befs_bread_iaddr()
do).

From: "Sergey S. Kostyliov" <rathamahata@php4.ru>

LBD patch merged long time ago, so it is safe to pass u64 block numbers to
sb_bread() when sector_t is large enough.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Network driver changes:
 - lcs: Add missing irb error checking.
 - lcs: Fix multicasting.
 - lcs: Use a seperate lock (ipm_lock) for multicast list.
 - lcs: Add missing in_dev_put in multicase address list handling.
 - iucv: Set static variables to NULL after kfree.
 - iucv: Do bus_unregister if module initialization fails.
 - netiucv: Convert iucvMagic to EBCDIC in con_action_start.
 - netiucv: Remove administration of ifno-stuff for device name,
 - netiucv: Add attribute to remove a netiucv device.
 - qeth: Add version string that is displayed at driver load time.
 - qeth: Fix memory leak in qeth_arp_query.
 - qeth: Remove duplicate case statements in qeth_do_ioctl.
 - qeth: Fix OSA broadcast filtering.
 - qeth: Increase timeout for purge ARP cache IPA.
 - qeth: Fix hsi device naming.
 - qeth: Add do_QDIO count to qeth performance statistics.
 - qeth: Allow writing to IP address takeover attribute only in
         state DOWN or RECOVER.
 - qeth: Fix hang when removing a vlan device.
 - qeth: Cleanup error messages for ARP commands.
 - qeth: Return EOPNOTSUPP for purge ARP on HiperSockets.
 - qeth: Drop skbs if the net_device of a qeth device is down.
 - qeth: Simplify ip address list processing.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

zfcp host adapter change:
 - Prevent infinite retry of SCSI commands when FCP adapter is unavailable.
 - Always queue error recovery structure to the error recovery running list.
 - Add help text to zfcp config option.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

3270 device driver change:
 - Don't allow activation of views while the initial size sensing is still
   in progress. Replace RAW3270_FLAGS_SHUTDOWN with RAW3270_FLAGS_READY.
 - Make 3270 views loadable as modules.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

dasd driver changes:
 - Do error recovery for error recovery requests.
 - Retry request if the start_IO failed because of a timeout.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Common i/o layer changes:
 - Delay unregister/register of ccw devices reappering on a different
   subchannel. Search for the old ccw_device & subchannel for the
   reattached device and deregister it too to avoid inconsistencies.
 - Fix path grouping for devices that present command reject for
   SetPGID but not for SensePGID.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390 core changes:
 - Rename idle_cpu_mask to nohz_cpu_mask as agreed with Dipankar.
 - Refine compiler version check for "Q" constraints in uaccess.h.
 - Store per process ptrace information to the correct place.
 - Fix per cpu data access for 64-bit modules.
 - Add topology_init function for cpu hotplug.
 - Define TASK_SIZE dependent on TIF_31BIT and define MM_VM_SIZE
   to 4TB to get rid of elf_map32 and arch_get_unmapped_area.

From: Geoff Gustafson <geoff@linux.jf.intel.com>,
      "Chen, Kenneth W" <kenneth.w.chen@intel.com>,
      Ingo Molnar <mingo@elte.hu>,
      me.

The big-SMP guys are seeing high CPU load due to del_timer_sync()'s
inefficiencies.  The callers are fs/aio.c and schedule_timeout().

We note that neither of these callers' timer handlers actually re-add the
timer - they are single-shot.

So we don't need all that complexity in del_timer_sync() - we can just run
del_timer() and if that worked we know the timer is dead.

Add del_single_shot_timer(), export it to modules and use it in AIO and
schedule_timeout().


(these numbers are for an earlier patch, but they'll be close)

Before:             32p     4p
     Warm cache   29,000    505
     Cold cache   37,800   1220

After:              32p     4p
     Warm cache       95     88
     Cold cache    1,800    140

[Measurements are CPU cycles spent in a call to del_timer_sync, the average
of 1000 calls. 32p is 16-node NUMA, 4p is SMP.]

(I cleaned up a few things and added some commentary)

From: Yoshinori Sato <ysato@users.sourceforge.jp>

- gcc-3.4 warning fix.
- io access address fix.
- cleanup code.

From: Yoshinori Sato <ysato@users.sourceforge.jp>

- Delete obsolete header files

From: Yoshinori Sato <ysato@users.sourceforge.jp>

- Separate taget depends config.

From: Yoshinori Sato <ysato@users.sourceforge.jp>

- ne2k compatible NIC support

From: Yoshinori Sato <ysato@users.sourceforge.jp>

- fix h8300 depend setup sequence

From: Yoshinori Sato <ysato@users.sourceforge.jp>

- add preempt support
- add new syscalls
- code cleanup

From: Yoshinori Sato <ysato@users.sourceforge.jp>

Sorry. There was the file which lacked.

From: Yoshinori Sato <ysato@users.sourceforge.jp>

- add PIC binary support

From: Yoshinori Sato <ysato@users.sourceforge.jp>

- symbol prefix (use h8300 and v850) support
- include headers

From: Yoshinori Sato <ysato@users.sourceforge.jp>

- add find_next_bit

Lookup typically touches three fields of the dentry: d_bucket, d_name.hash and
d_parent.

Change the layout of things so that these will always be in the same
cacheline.

- d_vfs_flags can be removed - just use d_flags.  All modifications of
  dentry->d_flags are under dentry->d_lock.

On x86 this takes the internal string size up to 40 bytes.  The
internal/external ratio on my 1.5M files hits 96%.

The gap between checking d_bucket and sampling d_move_count looks like a bug
to me.

It feels safer to be checking d_bucket after taking the lock, when we know
that it is stable.

And it's a little faster to check d_bucket after having checked the hash
rather than before.

When dentries are given an external name we currently allocate an entire qstr
for the external name.

This isn't needed.  We can use the internal qstr and kmalloc only the string
itself.  This saves 12 bytes from externally-allocated names and 4 bytes from
the dentry itself.

The saving of 4 bytes from the dentry doesn't actually decrease the dentry's
storage requirements, but it makes four more bytes available for internal
names, taking the internal/external ratio from 89% up to 93% on my 1.5M files.


Fix:

The qstr consolidation wasn't quite right, because it can cause qstr->len to
be unstable during lookup lockless traverasl.

Fix that up by taking d_lock earlier in lookup.  This serialises against
d_move.

Take the lock after comparing the parent and hash to preserve the
mostly-lockless behaviour.

This obsoletes d_movecount, which is removed.

Rework dentries so that the inline name length is between 31 and 48 bytes.

On SMP P4-compiled x86 each dentry consumes 160 bytes (24 per page).

Here's the histogram of name lengths on all 1.5M files on my workstation:

1:  0%
2:  0%
3:  1%
4:  5%
5:  8%
6:  13%
7:  19%
8:  26%
9:  33%
10:  42%
11:  49%
12:  55%
13:  60%
14:  64%
15:  67%
16:  69%
17:  71%
18:  73%
19:  75%
20:  76%
21:  78%
22:  79%
23:  80%
24:  81%
25:  82%
26:  83%
27:  85%
28:  86%
29:  87%
30:  88%
31:  89%
32:  90%
33:  91%
34:  92%
35:  93%
36:  94%
37:  95%
38:  96%
39:  96%
40:  96%
41:  96%
42:  96%
43:  96%
44:  97%
45:  97%
46:  97%
47:  97%
48:  97%
49:  98%
50:  98%
51:  98%
52:  98%
53:  98%
54:  98%
55:  98%
56:  98%
57:  98%
58:  98%
59:  98%
60:  99%
61:  99%
62:  99%
63:  99%
64:  99%

So on x86 we'll fit 89% of filenames into the inline name.


The patch also removes the NAME_ALLOC_LEN() rounding-up of the storage for the
out-of-line names.  That seems unnecessary.

Be consistent about d_vfs_flags locking: take dentry->d_lock when modifying
it.

A few filesystems modify dentry.d_flags under non-obvious locking.  To
consolidate that field wth d_vfs_flags they need to take ->d_lock

From: Markus Lidel <Markus.Lidel@shadowconnect.com>

* The Kconfig and Makefile in drivers/message/i2o still got a CONFIG_I2O_PCI
  entry, which is not used anymore.  This one is replaced by a
  CONFIG_I2O_CONFIG entry, which now builds the i2o_config module.

From: Markus Lidel <Markus.Lidel@shadowconnect.com>

* provides i2o_context_list_*() functions, which maps 64-bit pointers to
  32-bit context id's in a dynamic list.  On 32-bit systems the functions are
  replaced with a static inline.

* i2o_scsi now uses the i2o_context_list_*() functions for transaction
  context, and therefore now work on 64-bit systems too.

From: Markus Lidel <Markus.Lidel@shadowconnect.com>

* more than 3 "visible" disks (hda, hdb, hdc, hdd) lead to kernel panics.

* removes some unused code with partitions.

* I2O_LOCK was often called with the addresses of the controller, and not
  with the address of the device.  Fixed.

* the cleanup function for gendisk (del_gendisk) doesn't work if the queue
  is shared between different devices.  To workaround the queue is removed
  before.

* redundant code removed in module initialization and remove, use
  i2ob_new_device and i2ob_del_device instead.

* removed atomic_t queue_depth

* removed unnecessary and bogus code for queue handling