- 02 Mar, 2018 3 commits
-
-
Baolin Wang authored
This patch adds the device tree bindings for the Spreadtrum GPIO controller. The gpios will be supported by the GPIO generic library. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Arnd Bergmann authored
When the firmware driver is a loadable module, the gpio driver cannot be built-in: drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_set': gpio-raspberrypi-exp.c:(.text+0xb4): undefined reference to `rpi_firmware_property' drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_get': gpio-raspberrypi-exp.c:(.text+0x1ec): undefined reference to `rpi_firmware_property' drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_get_direction': gpio-raspberrypi-exp.c:(.text+0x360): undefined reference to `rpi_firmware_property' drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_get_polarity': gpio-raspberrypi-exp.c:(.text+0x4d4): undefined reference to `rpi_firmware_property' drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_dir_out': gpio-raspberrypi-exp.c:(.text+0x670): undefined reference to `rpi_firmware_property' drivers/gpio/gpio-raspberrypi-exp.o:gpio-raspberrypi-exp.c:(.text+0x7fc): more undefined references to `rpi_firmware_property' follow drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_dir_in': drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_probe': gpio-raspberrypi-exp.c:(.text+0x93c): undefined reference to `rpi_firmware_get' We already have a Kconfig dependency for it, but when compile-testing, it is disregarded. This changes the dependency so that compile-testing is only done when the firmware driver is completely disabled. Fixes: a98d90e7 ("gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Wang Dongsheng authored
"failed" maybe makes observer confuse when a consumer can not lookup, so change to a friendly information. Signed-off-by: Wang Dongsheng <dongsheng.wang@hxt-semitech.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 01 Mar, 2018 2 commits
-
-
James Hogan authored
Now that arch/metag/ has been removed, along with TZ1090 SoC support, remove the TZ1090 GPIO drivers. They are of no value without the architecture and SoC platform code. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: linux-gpio@vger.kernel.org Cc: linux-metag@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Anders Roxell authored
PRIu64 is defined in user space to match libc's uint64_t definition. However, gpioevent_data structure in the kernel is defined using the kernel's own __u64 type. gpio-event-mon.c: In function ‘monitor_device’: gpio-event-mon.c:102:19: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘__u64 {aka long long unsigned int}’ [-Wformat=] fprintf(stdout, "GPIO EVENT %" PRIu64 ": ", event.timestamp); ^~~~~~~~~~~~~~ LD /tmp/kselftest/gpiogpio-event-mon-in.o LINK /tmp/kselftest/gpiogpio-event-mon Fix is to replace PRIu64 with llu, which we know is what the kernel uses for __u64. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 26 Feb, 2018 1 commit
-
-
Maciej S. Szmigiero authored
This reverts commit 92a8046c. Now that the patch series changing ISA_BUS_API dependency to selection was merged this reversion will do the same for gpio-winbond driver to make it consistent with other ISA bus gpio drivers. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 23 Feb, 2018 1 commit
-
-
Rajmohan Mani authored
Remove the GPL v2 license boilerplate and update with the SPDX license identifier. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 22 Feb, 2018 21 commits
-
-
William Breathitt Gray authored
PC/104 device driver Kconfig options previously had an implicit EXPERT dependency by way of an explicit ISA_BUS_API dependency. Now that these driver Kconfig options select ISA_BUS_API rather than depend on it, the PC104 Kconfig option should have an explicit EXPERT dependency. The PC/104 form factor and bus architecture are common in embedded and specialized systems, but uncommon in typical desktop setups. For this reason, it is best to mask these devices and configurations via the EXPERT Kconfig option because the majority of users will never need to concern themselves with PC/104. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
William Breathitt Gray authored
ISA_BUS_API is selected by drivers themselves when necessary. The ISA_BUS Kconfig option is now simply a mask for true ISA device drivers and relevant configuration. For now, the ISA_BUS Kconfig option is only available for X86, but may be added for other arch builds in the future if the need arises. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
William Breathitt Gray authored
The ISA_BUS_API Kconfig option enables the compilation of the ISA bus driver. The ISA bus driver does not perform any hardware interaction, and is instead just a thin layer of software abstraction to eliminate boilerplate code common to ISA-style device drivers. Since ISA_BUS_API has no dependencies and does not jeopardize the integrity of the system when enabled, drivers should select it when the ISA bus driver functionality is needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
William Breathitt Gray authored
The ISA_BUS_API Kconfig option enables the compilation of the ISA bus driver. The ISA bus driver does not perform any hardware interaction, and is instead just a thin layer of software abstraction to eliminate boilerplate code common to ISA-style device drivers. Since ISA_BUS_API has no dependencies and does not jeopardize the integrity of the system when enabled, drivers should select it when the ISA bus driver functionality is needed. Cc: Wim Van Sebroeck <wim@iguana.be> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
William Breathitt Gray authored
The ISA_BUS_API Kconfig option enables the compilation of the ISA bus driver. The ISA bus driver does not perform any hardware interaction, and is instead just a thin layer of software abstraction to eliminate boilerplate code common to ISA-style device drivers. Since ISA_BUS_API has no dependencies and does not jeopardize the integrity of the system when enabled, drivers should select it when the ISA bus driver functionality is needed. Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Hien Dang authored
This patch adds an implementation that saves and restores the state of GPIO configuration on suspend and resume. Signed-off-by: Hien Dang <hien.dang.eb@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Modify structure of the bank info to simplify a saving registers] [Remove DEV_PM_OPS macro] Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
We were going out through the (legacy) gpio API to read the value of a line to set up polarity inversion. This is abusive. Do something less abusive by looking up the actual struct gpio_chip * instance and calling .get() directly on it. Acked-by: Hoan Tran <hotran@apm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This terminology is more precise. Also cut the stride calculation in the preprocessor, it confuses more than it helps when reading the driver. Acked-by: Hoan Tran <hotran@apm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
We are forward-declaring enum gpiod_flags, but this is not referenced by pointer, it is a real struct member, so we need to actually include it to compile anything including the local gpiolib.h header. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Axel Lin authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Jonathan Neuschäfer authored
The Nintendo Wii's chipset (called "Hollywood") has a GPIO controller that supports a configurable number of pins (up to 32), interrupts, and some special mechanisms to share the controller between the system's security processor (an ARM926) and the PowerPC CPU. Pin multiplexing is not supported. This patch adds a basic driver for this GPIO controller. Interrupt support will come in a later patch. This patch is based on code developed by Albert Herranz and the GameCube Linux Team, file arch/powerpc/platforms/embedded6xx/hlwd-gpio.c, available at https://github.com/DeltaResero/GC-Wii-Linux-Kernels, but has grown quite dissimilar. v3: - Do some style cleanups, as suggest by Andy Shevchenko v2: - Change hlwd_gpio_driver.driver.name to "gpio-hlwd" to match the filename (was "hlwd_gpio") - Remove unnecessary include of linux/of_gpio.h, as suggested by Linus Walleij. - Add struct device pointer to context struct to make it possible to use dev_info(hlwd->dev, "..."), as suggested by Linus Walleij - Use the GPIO_GENERIC library to reduce code size, as suggested by Linus Walleij - Use iowrite32be instead of __raw_writel for big-endian MMIO access, as suggested by Linus Walleij - Remove commit message paragraph suggesting to diff against the original driver, because it's so different now Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Cc: Albert Herranz <albert_herranz@yahoo.es> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Dave Stevenson authored
Pi3 and Compute Module 3 have a GPIO expander that the VPU communicates with. There is a mailbox service that now allows control of this expander, so add a kernel driver that can make use of it. Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Baruch Siach authored
The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware over I2C. The firmware mailbox interface allows the ARM core to control the GPIO lines. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Baruch Siach authored
Add latest firmware property tags from the latest Raspberry Pi downstream kernel. This is needed for the GPIO tags, so we can control the GPIO multiplexor lines. Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 13 Feb, 2018 1 commit
-
-
Linus Walleij authored
There is a register for "bypass" which seems to not be used for anything in some silicon designs, but may be used in others, and there is both a raw and masked interrupt status register. Define them all for clarity, no semantic changes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 12 Feb, 2018 3 commits
-
-
David Lechner authored
This adds support for the pinmux gpio ranges feature to the DaVinci gpio driver. Only device tree is supported since the non-DT boards don't use a generic pinmux controller. Cc: Keerthy <j-keerthy@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Jonathan Neuschäfer authored
The Nintendo Wii game console has a GPIO controller, which is used for the optical disk slot LED, buttons, poweroff, etc. This patch adds a binding for this GPIO controller. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
A single character (line break) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 11 Feb, 2018 8 commits
-
-
Linus Torvalds authored
-
Al Viro authored
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtense fix from Max Filippov: "Build fix for xtensa architecture with KASAN enabled" * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build with KASAN
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 update from Ley Foon Tan: - clean up old Kconfig options from defconfig - remove leading 0x and 0s from bindings notation in dts files * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: defconfig: Cleanup from old Kconfig options nios2: dts: Remove leading 0x and 0s from bindings notation
-
Max Filippov authored
The commit 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") removed KASAN_SHADOW_SCALE_SHIFT definition from include/linux/kasan.h and added it to architecture-specific headers, except for xtensa. This broke the xtensa build with KASAN enabled. Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h Reported by: kbuild test robot <fengguang.wu@intel.com> Fixes: 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") Acked-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Krzysztof Kozlowski authored
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae ("ipv4: Remove inet_lro library"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
-