- 29 Sep, 2022 9 commits
-
-
Stefan Roesch authored
Adds nowait asserts to btree search functions which are not used by buffered IO and direct IO paths. Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Stefan Roesch <shr@fb.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Stefan Roesch authored
We need to avoid unconditionally calling balance_dirty_pages_ratelimited as it could wait for some reason. Use balance_dirty_pages_ratelimited_flags with the BDP_ASYNC in case the buffered write is nowait, returning EAGAIN eventually. It also moves the function after the again label. This can cause the function to be called a bit later, but this should have no impact in the real world. Reviewed-by:
-
Stefan Roesch authored
We have everywhere setup for nowait, plumb NOWAIT through the write path. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Stefan Roesch authored
Add the nowait parameter to lock_and_cleanup_extent_if_need(). If the nowait parameter is specified we try to lock the extent in nowait mode. Reviewed-by:
-
Stefan Roesch authored
Add nowait parameter to the prepare_pages function. In case nowait is specified for an async buffered write request, do a nowait allocation or return -EAGAIN. Reviewed-by:
-
Josef Bacik authored
Now all the helpers that btrfs_check_nocow_lock uses handle nowait, add a nowait flag to btrfs_check_nocow_lock so it can be used by the write path. Reviewed-by:
-
Josef Bacik authored
For IOCB_NOWAIT we're going to want to use try lock on the extent lock, and simply bail if there's an ordered extent in the range because the only choice there is to wait for the ordered extent to complete. Reviewed-by:
-
Josef Bacik authored
In order to accommodate NOWAIT IOCB's we need to be able to do NO_FLUSH data reservations, so plumb this through the delalloc reservation system. Reviewed-by:
-
Josef Bacik authored
If we have NOWAIT specified on our IOCB and we're writing into a PREALLOC or NOCOW extent then we need to be able to tell can_nocow_extent that we don't want to wait on any locks or metadata IO. Fix can_nocow_extent to allow for NOWAIT. Reviewed-by:
-
- 26 Sep, 2022 31 commits
-
-
Josef Bacik authored
For NOWAIT IOCBs we'll need a way to tell search to not wait on locks or anything. Accomplish this by adding a path->nowait flag that will use trylocks and skip reading of metadata, returning -EAGAIN in either of these cases. For now we only need this for reads, so only the read side is handled. Add an ASSERT() to catch anybody trying to use this for writes so they know they'll have to implement the write side. Reviewed-by:
-
Stefan Roesch authored
Export the function balance_dirty_pages_ratelimited_flags(). It is now also called from btrfs. Reviewed-by:
-
Qu Wenruo authored
[BUG] When one user did a wrong attempt to clear block group tree, which can not be done through mount option, by using "-o clear_cache,space_cache=v2", it will cause the following error on a fs with block-group-tree feature: BTRFS info (device dm-1): force clearing of disk cache BTRFS info (device dm-1): using free space tree BTRFS info (device dm-1): clearing free space tree BTRFS info (device dm-1): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1) BTRFS info (device dm-1): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2) BTRFS error (device dm-1): block-group-tree feature requires fres-space-tree and no-holes BTRFS error (device dm-1): super block corruption detected before writing it to disk BTRFS: error (device dm-1) in write_all_supers:4318: errno=-117 Filesystem corrupted (unexpected superblock corruption detected) BTRFS warning (device dm-1: state E): Skipping commit of aborted transaction. [CAUSE] Although the dependency for block-group-tree feature is just an artificial one (to reduce test matrix), we put the dependency check into btrfs_validate_super(). This is too strict, and during space cache clearing, we will have a window where free space tree is cleared, and we need to commit the super block. In that window, we had block group tree without v2 cache, and triggered the artificial dependency check. This is not necessary at all, especially for such a soft dependency. [FIX] Introduce a new helper, btrfs_check_features(), to do all the runtime limitation checks, including: - Unsupported incompat flags check - Unsupported compat RO flags check - Setting missing incompat flags - Artificial feature dependency checks Currently only block group tree will rely on this. - Subpage runtime check for v1 cache With this helper, we can move quite some checks from open_ctree()/btrfs_remount() into it, and just call it after btrfs_parse_options(). Now "-o clear_cache,space_cache=v2" will not trigger the above error anymore. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
For function submit_extent_page() and alloc_new_bio(), we have an argument @end_io_func to indicate the end io function. But that function never change inside any call site of them, thus no need to pass the pointer around everywhere. There is a better match for the lifespan of all the call sites, as we have btrfs_bio_ctrl structure, thus we can put the endio function pointer there, and grab the pointer every time we allocate a new bio. Also add extra ASSERT()s to make sure every call site of submit_extent_page() and alloc_new_bio() has properly set the pointer inside btrfs_bio_ctrl. This removes one argument from the already long argument list of submit_extent_page(). Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Qu Wenruo authored
Normally we put (page, pg_len, pg_offset) arguments together, just like what __bio_add_page() does. But in submit_extent_page(), what we got is, (page, disk_bytenr, pg_len, pg_offset), which sometimes can be confusing. Change the order to (disk_bytenr, page, pg_len, pg_offset) to make it to follow the common schema. Reviewed-by:
-
Qu Wenruo authored
Since commit 390ed29b ("btrfs: refactor submit_extent_page() to make bio and its flag tracing easier"), we are using bio_ctrl structure to replace some of arguments of submit_extent_page(). But unfortunately that commit didn't update the comment for submit_extent_page(), thus some arguments are stale like: - bio_ret - mirror_num Those are all contained in bio_ctrl now. - prev_bio_flags We no longer use this flag to determine if we can merge bios. Update the comment for submit_extent_page() to keep it up-to-date. Reviewed-by:
-
Josef Bacik authored
dev-replace.h just has function prototypes for device replace, however if you happen to include it in the wrong order you'll get compile errors because of different structures not being defined. Since these are just pointer args to functions we can declare them at the top in order to reduce the pain of using the header. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
Josef Bacik authored
We always check the root of an inode as well as it's inode number to determine if it's a free space inode. This is problematic as the helper is in a header file where it doesn't have the fs_info definition. To avoid this and make the check a little cleaner simply add a flag to the runtime_flags to indicate that the inode is a free space inode, set that when we create the inode, and then change the helper to check for this flag. Reviewed-by:
-
Josef Bacik authored
This exists to insert the btree_inode in the super blocks inode hash table. Since it's only used for the btree inode move the code to where we use it in disk-io.c and remove the helper. Reviewed-by:
-
Josef Bacik authored
This is defined in btrfs_inode.h, and dereferences btrfs_root and btrfs_fs_info, both of which aren't defined in btrfs_inode.h. Additionally, in many places we already have root or fs_info, so this helper often makes the code harder to read. So delete the helper and simply open code it in the few places that we use it. Reviewed-by:
-
Josef Bacik authored
This is defined in ordered-data.h, but is only used in file-item.c. Move this to file-item.c as it doesn't need to be global. Reviewed-by:
-
Josef Bacik authored
This is purely cosmetic, to make it straightforward to copy and paste the definition and helpers from ctree.h into fs.h. These are helpers that act directly on the fs_info, and were scattered throughout ctree.h. Move them directly below the fs_info definition to make it easier to move them later. This includes the exclop prototypes, which shares an enum that's used in struct btrfs_fs_info as well. Reviewed-by:
-
Josef Bacik authored
This helper is only used in inode.c, move it locally to that file instead of defining it in ctree.h. Reviewed-by:
-
Josef Bacik authored
In order to make it more straightforward to move the fs_info struct and it's related structures, move the struct declarations to the top of ctree.h. This will make it easier to clean up after the fact. Reviewed-by:
-
Josef Bacik authored
This isn't a great spot for this, but one of the swapfile helper functions is in volumes.c, so move the struct to volumes.h. In the future when we have better separation of code there will be a more natural spot for this. Reviewed-by:
-
Josef Bacik authored
This is defined in volumes.c, move the prototype into volumes.h. Reviewed-by:
-
Josef Bacik authored
The code for this helper is in space-info.c, move the prototype to space-info.h. Reviewed-by:
-
Josef Bacik authored
This is actually embedded in struct btrfs_block_group, so move this definition to block-group.h, and then open-code the init of the tree where we init the rest of the block group instead of using a helper. Reviewed-by:
-
Josef Bacik authored
This is a block group related definition, move it into block-group.h. Reviewed-by:
-
Christoph Hellwig authored
There is a separate I/O failure tree to track the fail reads, so remove the extra EXTENT_DAMAGED bit in the I/O tree as it's set but never used. Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Josef Bacik authored
We're only initializing extent_io_tree's with a private data if we're a normal inode, so we don't need this extra check. Signed-off-by:
-
Josef Bacik authored
We only use this for normal inodes, so don't set it if we're not a normal inode. Signed-off-by:
-
Josef Bacik authored
Instead of taking up a whole argument to indicate we're clearing everything in a range, simply add another EXTENT bit to control this, and then update all the callers to drop this argument from the clear_extent_bit variants. Signed-off-by:
-
Josef Bacik authored
When trying to release the extent states due to memory pressure we'll set all the bits except LOCKED, NODATASUM, and DELALLOC_NEW. This includes some of the CTL bits, which isn't really a problem but isn't correct either. Exclude the CTL bits from this clearing. Signed-off-by:
-
Josef Bacik authored
This was used as an optimization for count_range_bits(EXTENT_DIRTY), which was used by the failed record code. However this was removed in this series by patch "btrfs: convert the io_failure_tree to a plain rb_tree" which was the last user of this optimization. Remove the ->dirty_bytes as nobody cares anymore. Signed-off-by:
-
Josef Bacik authored
Since commit 78361f64ff42 ("btrfs: remove unnecessary EXTENT_UPTODATE state in buffered I/O path") we no longer check ->track_uptodate, remove it. Signed-off-by: -
Josef Bacik authored
We have two variants of lock/unlock extent, one set that takes a cached state, another that does not. This is slightly annoying, and generally speaking there are only a few places where we don't have a cached state. Simplify this by making lock_extent/unlock_extent the only variant and make it take a cached state, then convert all the callers appropriately. Signed-off-by:
-
Josef Bacik authored
The only places that set extent_changeset is set_record_extent_bits, everywhere else sets it to NULL. Drop this argument from set_extent_bit. Signed-off-by:
-
Josef Bacik authored
This is only used for internal locking related helpers, everybody else just passes in NULL. I've changed set_extent_bit to __set_extent_bit and made it static, removed failed_start from set_extent_bit and have it call __set_extent_bit with a NULL failed_start, and I've moved some code down below the now static __set_extent_bit. Signed-off-by:
-
Josef Bacik authored
This is only used in the case that we are clearing EXTENT_LOCKED, so infer this value from the bits passed in instead of taking it as an argument. Signed-off-by:
-
Josef Bacik authored
This is only ever set if we have EXTENT_LOCKED set, so simply push this into the function itself and remove the function argument. Signed-off-by:
-
