- 07 Jun, 2016 28 commits
-
-
Hans Verkuil authored
Remove this deprecated old driver. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Remove this deprecated old driver. Signed-off-by:
-
ayaka authored
It is a cosmetic commit. Signed-off-by:
ayaka <ayaka@soulik.info> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
ayaka authored
We don't need to request the sizeimage or num_planes in try_fmt. Signed-off-by:
-
ayaka authored
The encoder forget the work to call hardware to release its buffers. This patch came from chromium project. I just change its code style and make the API match with new kernel. Signed-off-by:
-
Abylay Ospan authored
I'm maintainer for Sony Helene tuner (drivers/media/dvb-frontends/helene.*) Signed-off-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/dvb-frontends/helene.c: In function 'helene_write_regs': drivers/media/dvb-frontends/helene.c:312:5: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Wformat=] "wr reg=%04x: len=%d vs %lu is too big!\n", ^ Signed-off-by: -
Abylay Ospan authored
correct is CXD2841ER and CXD2854ER incorrect was CXD2441ER and CXD2454ER Signed-off-by:
-
Abylay Ospan authored
Old behaviour: frontend0 - DVB-S/S2 frontend1 - DVB-T/T2 frontend2 - DVB-C frontend3 - ISDB-T New behaviour (DVBv5 API compliant): frontend0 - DVB-S/S2 frontend1 - DVB-T/T2/C/ISDB-T DTV standard should be selected by DTV_DELIVERY_SYSTEM call. And DVB-C default bandwidth now 8MHz Signed-off-by:
-
Abylay Ospan authored
bandwidth 1.7,5,6,7,8Mhz support for DVB-T2 Signed-off-by:
-
Abylay Ospan authored
Fixed HELENE tuner frequency calculation Signed-off-by:
-
Mauro Carvalho Chehab authored
now when new tuning parameters specified demod should retune. Also ISDB-T frequency offset calculation added (cxd2841er_get_carrier_offset_i). While here, fix re-tune for DVB-C Annex A, using the desired bandwidth, instead of using 8MHz. Signed-off-by:
-
Abylay Ospan authored
Fix offset calculation inside cxd2841er_get_carrier_offset_t Now DVB-T should be tuned correctly Signed-off-by:
-
Abylay Ospan authored
Avoid error message: cxd2841er_read_status_s(): invalid state 1 Always force demod to shutdown state before initializing Signed-off-by:
-
Abylay Ospan authored
Adding cxd2841er_get_carrier_offset_t to calculate DVB-T offset for Sony demodulators CXD2841ER and CXD2854ER Signed-off-by:
-
Abylay Ospan authored
I'm second maintainer for netup_unidvb, cxd2841er, horus3a, ascot2e Signed-off-by:
-
Abylay Ospan authored
mistakenly membase8_io used instead of membase8_config in this case we can't read/write CAM module memory (TUPLES) Signed-off-by:
-
Abylay Ospan authored
New hardware revision of NetUP Universal DVB card (rev 1.4): * changed tuners (CXD2861ER and CXD2832AER) to CXD2858ER * changed demodulator (CXD2841ER) to CXD2854ER card now supports: DVB-S/S2, DVB-T/T2, DVB-C/C2, ISDB-T PCI id's assigned for new hardware revision is: 1b55:18f7 Signed-off-by:
-
Abylay Ospan authored
* fix buffer length check * do not rely on ROLLOFF Signed-off-by:
-
Abylay Ospan authored
CXD2854ER is identical to CXD2841ER except ISDB-T/S added. New method 'cxd2841er_attach_i' is added xtal frequency now configurable. Available options: 20.5MHz, 24MHz, 41MHz Signed-off-by:
-
Abylay Ospan authored
This is Sony HELENE DVB-S/S2 DVB-T/T2 DVB-C/C2 ISDB-T/S tuner driver (CXD2858ER). Tuner is used on NetUP Dual Universal DVB CI card (hardware revision 1.4). Use 'helene_attach_s' to attach tuner in 'satellite mode'. Use 'helene_attach' for 'terrestrial mode'. Satellite delivery systems supported: DVB-S/S2, ISDB-S Terrestrial delivery systems supported: DVB-T/T2, ISDB-T Cable delivery systems supported: DVB-C/C2 Signed-off-by:
-
Oliver Neukum authored
Allow for SS+ USB devices. Signed-off-by:
Oliver Neukum <ONeukum@suse.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Nicolas Dufresne authored
The formula used to calculate bytesperline only works for packed format. So far, all planar format we support have their bytesperline equal to the image width (stride of the Y plane or a line of Y for M420). Signed-off-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Andrew-CT Chen authored
Add a DT binding documentation of Video Processor Unit for the MT8173 SoC from Mediatek. Signed-off-by:
Andrew-CT Chen <andrew-ct.chen@mediatek.com> Signed-off-by:
Tiffany Lin <tiffany.lin@mediatek.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
ayaka authored
User-space applications can use the VIDIOC_REQBUFS ioctl to determine if a memory mapped, user pointer or DMABUF based I/O is supported by the driver. So a set of VIDIOC_REQBUFS ioctl calls will be made with count 0 and then the real VIDIOC_REQBUFS call with count == n. But for count 0, the driver not only frees the buffer but also closes the MFC instance and s5p_mfc_ctx state is set to MFCINST_FREE. The VIDIOC_REQBUFS handler for the output device checks if the s5p_mfc_ctx state is set to MFCINST_INIT (which happens on an VIDIOC_S_FMT) and fails otherwise. So after a VIDIOC_REQBUFS(n), future VIDIOC_REQBUFS(n) calls will fails unless a VIDIOC_S_FMT ioctl calls happens before the reqbufs. But applications may first set the format and then attempt to determine the I/O methods supported by the driver (for example Gstramer does it) so the state won't be set to MFCINST_INIT again and VIDIOC_REQBUFS will fail. To avoid this issue, only free the buffers on VIDIOC_REQBUFS(0) but don't close the MFC instance to allow future VIDIOC_REQBUFS(n) calls to succeed. [javier: Rewrote changelog to explain the problem more detailed] Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Acked-by:
Nicolas Dufresne <nicolas@collabora.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
Failing to get the struct s5p_mfc_pm .clock is a non-fatal error so the clock field can have a errno pointer value. But s5p_mfc_final_pm() only checks if .clock is not NULL before attempting to unprepare and put it. This leads to the following warning in clk_put() due s5p_mfc_final_pm(): WARNING: CPU: 3 PID: 1023 at drivers/clk/clk.c:2814 s5p_mfc_final_pm+0x48/0x74 [s5p_mfc] CPU: 3 PID: 1023 Comm: rmmod Tainted: G W 4.6.0-rc6-next-20160502-00005-g5a15a49106bc #9 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c010e1bc>] (unwind_backtrace) from [<c010af28>] (show_stack+0x10/0x14) [<c010af28>] (show_stack) from [<c032485c>] (dump_stack+0x88/0x9c) [<c032485c>] (dump_stack) from [<c011b8e8>] (__warn+0xe8/0x100) [<c011b8e8>] (__warn) from [<c011b9b0>] (warn_slowpath_null+0x20/0x28) [<c011b9b0>] (warn_slowpath_null) from [<bf16004c>] (s5p_mfc_final_pm+0x48/0x74 [s5p_mfc]) [<bf16004c>] (s5p_mfc_final_pm [s5p_mfc]) from [<bf157414>] (s5p_mfc_remove+0x8c/0x94 [s5p_mfc]) [<bf157414>] (s5p_mfc_remove [s5p_mfc]) from [<c03fe1f8>] (platform_drv_remove+0x24/0x3c) [<c03fe1f8>] (platform_drv_remove) from [<c03fcc70>] (__device_release_driver+0x84/0x110) [<c03fcc70>] (__device_release_driver) from [<c03fcdd8>] (driver_detach+0xac/0xb0) [<c03fcdd8>] (driver_detach) from [<c03fbff8>] (bus_remove_driver+0x4c/0xa0) [<c03fbff8>] (bus_remove_driver) from [<c01886a8>] (SyS_delete_module+0x174/0x1b8) [<c01886a8>] (SyS_delete_module) from [<c01078c0>] (ret_fast_syscall+0x0/0x3c) Assign the pointer to NULL in case of a lookup failure to fix the issue. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
-
Marek Szyprowski authored
This patch fixes build break caused by lack of dma-iommu API on ARM64 (this API is specific to ARM 32bit architecture). Signed-off-by: -
git://linuxtv.org/snawrocki/samsungMauro Carvalho Chehab authored
* 'for-v4.8/media/exynos-mfc' of git://linuxtv.org/snawrocki/samsung: media: s5p-mfc: add iommu support media: s5p-mfc: replace custom reserved memory handling code with generic one media: s5p-mfc: use generic reserved memory bindings of: reserved_mem: add support for using more than one region for given device media: set proper max seg size for devices on Exynos SoCs media: vb2-dma-contig: add helper for setting dma max seg size s5p-mfc: Fix race between s5p_mfc_probe() and s5p_mfc_open() s5p-mfc: Add release callback for memory region devs s5p-mfc: Set device name for reserved memory region devs
-
- 03 Jun, 2016 9 commits
-
-
Marek Szyprowski authored
This patch adds support for IOMMU to s5p-mfc device driver. MFC firmware is limited and it cannot use the default configuration. If IOMMU is available, the patch disables the default DMA address space configuration and creates a new address space of size limited to 256M and base address set to 0x20000000. For now the same address space is shared by both 'left' and 'right' memory channels, because the DMA/IOMMU frameworks do not support configuring them separately. This is not optimal, but besides limiting total address space available has no other drawbacks (MFC firmware supports 256M of address space per each channel). Signed-off-by:
-
Marek Szyprowski authored
This patch removes custom code for initialization and handling of reserved memory regions in s5p-mfc driver and replaces it with generic reserved memory regions api. s5p-mfc driver now handles two reserved memory regions defined by generic reserved memory bindings. Support for non-dt platform has been removed, because all supported platforms have been already converted to device tree. Signed-off-by:
-
Marek Szyprowski authored
Use generic reserved memory bindings and mark old, custom properties as obsoleted. Signed-off-by:
-
Marek Szyprowski authored
This patch allows device drivers to initialize more than one reserved memory region assigned to given device. When driver needs to use more than one reserved memory region, it should allocate child devices and initialize regions by index for each of its child devices. Signed-off-by:
-
Marek Szyprowski authored
All multimedia devices found on Exynos SoCs support only contiguous buffers, so set DMA max segment size to DMA_BIT_MASK(32) to let memory allocator to correctly create contiguous memory mappings. Signed-off-by:
-
Marek Szyprowski authored
Add a helper function for device drivers to set DMA's max_seg_size. Setting it to largest possible value lets DMA-mapping API always create contiguous mappings in DMA address space. This is essential for all devices, which use dma-contig videobuf2 memory allocator and shared buffers. Till now, the only case when vb2-dma-contig really 'worked' was a case where userspace provided USERPTR buffer, which was in fact mmaped contiguous buffer from the other v4l2/drm device. Also DMABUF made of contiguous buffer worked only when its exporter did not split it into several chunks in the scatter-list. Any other buffer failed, regardless of the arch/platform used and the presence of the IOMMU of the device bus. This patch provides interface to fix this issue. Signed-off-by:
-
Javier Martinez Canillas authored
The s5p_mfc_probe() function registers the video devices before all the resources needed by s5p_mfc_open() are correctly initalized. So if s5p_mfc_open() function is called before s5p_mfc_probe() finishes (since the video dev is already registered), a NULL pointer dereference will happen due s5p_mfc_open() accessing uninitialized vars such as the struct s5p_mfc_dev .watchdog_timer and .mfc_ops fields. An example is following BUG caused by add_timer() getting a NULL pointer: [ 45.765374] kernel BUG at kernel/time/timer.c:790! [ 45.765381] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM ... [ 45.766149] [<c016fdf4>] (mod_timer) from [<bf181d18>] (s5p_mfc_open+0x274/0x4d4 [s5p_mfc]) [ 45.766416] [<bf181d18>] (s5p_mfc_open [s5p_mfc]) from [<bf0214a0>] (v4l2_open+0x9c/0x100 [videodev]) [ 45.766547] [<bf0214a0>] (v4l2_open [videodev]) from [<c01e355c>] (chrdev_open+0x9c/0x178) [ 45.766575] [<c01e355c>] (chrdev_open) from [<c01dceb4>] (do_dentry_open+0x1e0/0x300) [ 45.766595] [<c01dceb4>] (do_dentry_open) from [<c01ec2f0>] (path_openat+0x800/0x10d4) [ 45.766610] [<c01ec2f0>] (path_openat) from [<c01ed8b8>] (do_filp_open+0x5c/0xc0) [ 45.766624] [<c01ed8b8>] (do_filp_open) from [<c01de218>] (do_sys_open+0x10c/0x1bc) [ 45.766642] [<c01de218>] (do_sys_open) from [<c01078c0>] (ret_fast_syscall+0x0/0x3c) [ 45.766655] Code: eaffffe3 e3a00001 e28dd008 e8bd81f0 (e7f001f2) Fix it by registering the video devs as the last step in s5p_mfc_probe(). Signed-off-by:
-
Javier Martinez Canillas authored
When s5p_mfc_remove() calls put_device() for the reserved memory region devs, the driver core warns that the dev doesn't have a release callback: WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90 Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed. Also, the declared DMA memory using dma_declare_coherent_memory() isn't relased so add a dev .release that calls dma_release_declared_memory(). Cc: <stable@vger.kernel.org> Fixes: 6e83e6e2 ("[media] s5p-mfc: Fix kernel warning on memory init") Signed-off-by:
-
Javier Martinez Canillas authored
The devices don't have a name set, so makes dev_name() returns NULL which makes harder to identify the devices that are causing issues, for example: WARNING: CPU: 2 PID: 616 at drivers/base/core.c:251 device_release+0x8c/0x90 Device '(null)' does not have a release() function, it is broken and must be fixed. And after setting the device name: WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90 Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed. Cc: <stable@vger.kernel.org> Fixes: 6e83e6e2 ("[media] s5p-mfc: Fix kernel warning on memory init") Signed-off-by:
-
- 30 May, 2016 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 4.7-rc1 * tag 'v4.7-rc1': (10534 commits) Linux 4.7-rc1 hash_string: Fix zero-length case for !DCACHE_WORD_ACCESS Rename other copy of hash_string to hashlen_string hpfs: implement the show_options method affs: fix remount failure when there are no options changed hpfs: fix remount failure when there are no options changed fs: fix binfmt_aout.c build error h8300: Add <asm/hash.h> microblaze: Add <asm/hash.h> m68k: Add <asm/hash.h> <linux/hash.h>: Add support for architecture-specific functions fs/namei.c: Improve dcache hash function Eliminate bad hash multipliers from hash_32() and hash_64() Change hash_64() return value to 32 bits <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() fs/namei.c: Add hashlen_string() function Pull out string hash to <linux/stringhash.h> Revert "platform/chrome: chromeos_laptop: Add Leon Touch" i2c: dev: use after free in detach MIPS: Add missing FROZEN hotplug notifier transitions ...
-
- 29 May, 2016 2 commits
-
-
Linus Torvalds authored
-
George Spelvin authored
The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
