- 17 Dec, 2018 40 commits
-
-
Jiri Olsa authored
So we can get out of hist processing ASAP on user request. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-r8aufbgbixr2f85s3wcoaw9v@git.kernel.orgSigned-off-by:
-
Jiri Olsa authored
Use conditional variable logic to synchronize between the reading and processing threads. Currently it's done by having mutex around rotation code. Using a POSIX cond variable to sync both threads after queues rotation: Process thread: - Detects data - Switches queues - Sets rotate variable - Waits in pthread_cond_wait() Read thread: - Detects rotate is set - Kicks the process thread with a pthread_cond_signal() After this rotation is safely completed and both threads can continue with the new queue. Signed-off-by: -
Jiri Olsa authored
Add a new thread that takes care of the hist creating to alleviate the main reader thread so it can keep perf mmaps served in time so that we reduce the possibility of losing events. The 'perf top' command now spawns 2 extra threads, the data processing is the following: 1) The main thread reads the data from mmaps and queues them to ordered events object; 2) The processing threads takes the data from the ordered events object and create initial histogram; 3) The GUI thread periodically sorts the initial histogram and presents it. Passing the data between threads 1 and 2 is done by having 2 ordered events queues. One is always being stored by thread 1 while the other is flushed out in thread 2. Passing the data between threads 2 and 3 stays the same as was initially for threads 1 and 3. Signed-off-by: -
Jiri Olsa authored
We can't display the UI box saying that we are slow in the reader thread. That will make 'perf top' even slower and the user even more angry ;-) Move the UI box message from the reader thread to the UI thread and change it to a helpline, so there's no need to 'press any key'. Signed-off-by:
-
Jiri Olsa authored
Add a 'lost count' to 'perf top' headers: # perf top --stdio PerfTop: 3850 irqs/sec kernel:49.0% exact: 100.0% lost: 0/0 [4000Hz cycles:ppp], (all, 8 CPUs) # perf top Samples: 0 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 0 lost: 0/0 The format is: <current period lost>/<total lost> Signed-off-by:
-
Jiri Olsa authored
We will need it in following patch, where we can't use the container_of() trick to get the higher level object. Signed-off-by:
-
Jiri Olsa authored
Decide to use the progress bar one level higher, we will need this in following patch. Signed-off-by:
-
Andi Kleen authored
When looking at PT or brstackinsn traces with 'perf script' it can be very useful to see the source code. This adds a simple facility to print them with 'perf script', if the information is available through dwarf % perf record ... % perf script -F insn,ip,sym,srccode ... 4004c6 main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004c6 main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004b3 main 6 v++; % perf record -b ... % perf script -F insn,ip,sym,srccode,brstackinsn ... main+22: 0000000000400543 insn: e8 ca ff ff ff # PRED |18 f1(); f1: 0000000000400512 insn: 55 |10 { 0000000000400513 insn: 48 89 e5 0000000000400516 insn: b8 00 00 00 00 |11 f2(); 000000000040051b insn: e8 d6 ff ff ff # PRED f2: 00000000004004f6 insn: 55 |5 { 00000000004004f7 insn: 48 89 e5 00000000004004fa insn: 8b 05 2c 0b 20 00 |6 c = a / b; 0000000000400500 insn: 8b 0d 2a 0b 20 00 0000000000400506 insn: 99 0000000000400507 insn: f7 f9 0000000000400509 insn: 89 05 29 0b 20 00 000000000040050f insn: 90 |7 } 0000000000400510 insn: 5d 0000000000400511 insn: c3 # PRED f1+14: 0000000000400520 insn: b8 00 00 00 00 |12 f2(); 0000000000400525 insn: e8 cc ff ff ff # PRED f2: 00000000004004f6 insn: 55 |5 { 00000000004004f7 insn: 48 89 e5 00000000004004fa insn: 8b 05 2c 0b 20 00 |6 c = a / b; Not supported for callchains currently, would need some layout changes there. Committer notes: Fixed the build on Alpine Linux (3.4 .. 3.8) by addressing this warning: In file included from util/srccode.c:19:0: /usr/include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp] #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> ^~~~~~~ cc1: all warnings being treated as errors Signed-off-by:Andi Kleen <ak@linux.intel.com> Tested-by:
-
Arnaldo Carvalho de Melo authored
To cope with older kernels that don't have this patch backported: 026842d1 ("tracing/syscalls: Rename "/format" tracepoint field name "nr" to "__syscall_nr:") This makes 'perf trace' work again in RHEL7 kernels. Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-6h1syw2isegnhb1bjmtr9x9k@git.kernel.orgSigned-off-by:
-
Mark Drayton authored
The default timeout of 500ms for parsing /proc/<pid>/maps files is too short for profiling many of our services. This can be overridden by passing --proc-map-timeout to the relevant command but it'd be nice to globally increase our default value. This patch permits setting a different default with the core.proc-map-timeout config file parameter. Signed-off-by:
Mark Drayton <mbd@fb.com> Acked-by:
Song Liu <songliubraving@fb.com> Acked-by:
-
Ingo Molnar authored
Go over the tools/ files that are maintained in Arnaldo's tree and fix common typos: half of them were in comments, the other half in JSON files. No change in functionality intended. Committer notes: This was split from a larger patch as there are code that is, additionally, maintained outside the kernel tree, so to ease cherry-picking and/or backporting, split this into multiple patches. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.comSigned-off-by:
-
Ingo Molnar authored
Go over the tools/ files that are maintained in Arnaldo's tree and fix common typos: half of them were in comments, the other half in JSON files. No change in functionality intended. Committer notes: This was split from a larger patch as there are code that is, additionally, maintained outside the kernel tree, so to ease cherry-picking and/or backporting, split this into multiple patches. Just typos in comments, no need to backport, reducing the possibility of possible backporting artifacts. Signed-off-by:
-
Ingo Molnar authored
Go over the tools/ files that are maintained in Arnaldo's tree and fix common typos: half of them were in comments, the other half in JSON files. No change in functionality intended. Committer notes: This was split from a larger patch as there are code that is, additionally, maintained outside the kernel tree, so to ease cherry picking and/or backporting, split this into multiple patches. This one has information that is presented to the user, albeit in debug mode. Signed-off-by:
-
Ingo Molnar authored
Go over the tools/ files that are maintained in Arnaldo's tree and fix common typos: half of them were in comments, the other half in JSON files. No change in functionality intended. Committer notes: This was split from a larger patch as there are code that is, additionally, maintained outside the kernel tree, so to ease cherry picking and/or backporting, split this into multiple patches. In this particular case, it affects documentation, so may be interesting to cherry pick as it is information that is presented to the user. Signed-off-by:
-
Ingo Molnar authored
Go over the tools/ files that are maintained in Arnaldo's tree and fix common typos: half of them were in comments, the other half in JSON files. No change in functionality intended. Committer notes: This was split from a larger patch as there are code that is, additionally, maintained outside the kernel tree, so to ease cherry picking and/or backporting, split this into multiple patches. Signed-off-by:
-
Ingo Molnar authored
Go over the tools/ files that are maintained in Arnaldo's tree and fix common typos: half of them were in comments, the other half in JSON files. ( Care should be taken not to re-import these typos in the future, if the JSON files get updated by the vendor without fixing the typos. ) No change in functionality intended. Committer notes: This was split from a larger patch as there are code that is, additionally, maintained outside the kernel tree, so to ease cherry picking and/or backporting, split this into multiple patches. Signed-off-by:
-
Florian Fainelli authored
The breakpoint tests on the ARM 32-bit kernel are broken in several ways. The breakpoint length requested does not necessarily match whether the function address has the Thumb bit (bit 0) set or not, and this does matter to the ARM kernel hw_breakpoint infrastructure. See [1] for background. [1]: https://lkml.org/lkml/2018/11/15/205 As Will indicated, the overflow handling would require single-stepping which is not supported at the moment. Just disable those tests for the ARM 32-bit platforms and update the comment above to explain these limitations. Co-developed-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181203191138.2419-1-f.fainelli@gmail.comSigned-off-by:
-
Robert Walker authored
This patch adds support for generating instruction samples from trace of AArch32 programs using the A32 and T32 instruction sets. T32 has variable 2 or 4 byte instruction size, so the conversion between addresses and instruction counts requires extra information from the trace decoder, requiring version 0.10.0 of OpenCSD. A check for the OpenCSD library version has been added to the feature check for OpenCSD. Signed-off-by:
Robert Walker <robert.walker@arm.com> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by:
Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1543839526-30348-1-git-send-email-robert.walker@arm.comSigned-off-by:
-
Sihyeon Jang authored
Committer testing: Before: # tools/perf/trace/beauty/mmap_flags.sh static const char *mmap_flags[] = { [ilog2(0x40) + 1] = "32BIT", tools/perf/trace/beauty/mmap_flags.sh: line 23: [: missing `]' [ilog2(0x01) + 1] = "SHARED", [ilog2(0x02) + 1] = "PRIVATE", [ilog2(0x10) + 1] = "FIXED", [ilog2(0x20) + 1] = "ANONYMOUS", [ilog2(0x100000) + 1] = "FIXED_NOREPLACE", tools/perf/trace/beauty/mmap_flags.sh: line 28: [: missing `]' [ilog2(0x0100) + 1] = "GROWSDOWN", [ilog2(0x0800) + 1] = "DENYWRITE", [ilog2(0x1000) + 1] = "EXECUTABLE", [ilog2(0x2000) + 1] = "LOCKED", [ilog2(0x4000) + 1] = "NORESERVE", [ilog2(0x8000) + 1] = "POPULATE", [ilog2(0x10000) + 1] = "NONBLOCK", [ilog2(0x20000) + 1] = "STACK", [ilog2(0x40000) + 1] = "HUGETLB", [ilog2(0x80000) + 1] = "SYNC", }; # After: $ tools/perf/trace/beauty/mmap_flags.sh static const char *mmap_flags[] = { [ilog2(0x40) + 1] = "32BIT", [ilog2(0x01) + 1] = "SHARED", [ilog2(0x02) + 1] = "PRIVATE", [ilog2(0x10) + 1] = "FIXED", [ilog2(0x20) + 1] = "ANONYMOUS", [ilog2(0x100000) + 1] = "FIXED_NOREPLACE", [ilog2(0x0100) + 1] = "GROWSDOWN", [ilog2(0x0800) + 1] = "DENYWRITE", [ilog2(0x1000) + 1] = "EXECUTABLE", [ilog2(0x2000) + 1] = "LOCKED", [ilog2(0x4000) + 1] = "NORESERVE", [ilog2(0x8000) + 1] = "POPULATE", [ilog2(0x10000) + 1] = "NONBLOCK", [ilog2(0x20000) + 1] = "STACK", [ilog2(0x40000) + 1] = "HUGETLB", [ilog2(0x80000) + 1] = "SYNC", }; $ Signed-off-by:Sihyeon Jang <uneedsihyeon@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: aca70cc40a0b ("perf beauty mmap_flags: Check if the arch has a mmap.h file") Link: http://lkml.kernel.org/r/20181202080651.4685-1-uneedsihyeon@gmail.comSigned-off-by:
-
Tzvetomir Stoyanov authored
In order to make libtraceevent into a proper library, its API should be straightforward. This patch hides few API functions, intended for internal usage only: tep_free_event(), tep_free_format_field(), __tep_data2host2(), __tep_data2host4() and __tep_data2host8(). The patch also alignes the libtraceevent summary man page with these API changes. Signed-off-by:
Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181130154647.891651290@goodmis.orgSigned-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Tzvetomir Stoyanov authored
In order to make libtraceevent into a proper library, its API should be straightforward. The __tep_data2host*() functions are going to no longer be available as a libtraceevent API, tep_read_number() should be used instead. This patch replaces __tep_data2host*() usage with tep_read_number() in perf. Signed-off-by:
-
Tzvetomir Stoyanov authored
In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. This renames tep_free_format() to tep_free_event(), which describes more closely the purpose of the function. Signed-off-by:
-
Tzvetomir Stoyanov authored
In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. This renames 'struct tep_event_format' to 'struct tep_event', which describes more closely the purpose of the struct. Signed-off-by:
-
Tzvetomir Stoyanov authored
This patch installs trace-seq.h header file on "make install". Signed-off-by:
-
Tzvetomir Stoyanov authored
This patch implements integration with pkg-config framework. pkg-config can be used by the library users to determine required CFLAGS and LDFLAGS in order to use the library Signed-off-by:
-
Tzvetomir Stoyanov authored
This patch implements a new API of the tracevent library: int tep_get_ref(struct tep_handle *tep); The API returns the reference counter "ref_count" of the tep handler. As "struct tep_handle" is internal only, its members cannot be accessed by the library users, the API is used to get the reference counter. Signed-off-by:
-
Jin Yao authored
Add explanations for new columns "IPC" and "IPC coverage" in perf documentation. v5: --- Update the description according to Ingo's comments. Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Reviewed-by:
-
Jin Yao authored
Support displaying the average IPC and IPC coverage per symbol in 'perf report' --tui and --stdio modes. For example, $ perf record -b ... $ perf report -s symbol Overhead Symbol IPC [IPC Coverage] 39.60% [.] __random 2.30 [ 54.8%] 18.02% [.] main 0.43 [ 54.3%] 14.21% [.] compute_flag 2.29 [100.0%] 14.16% [.] rand 0.36 [100.0%] 7.06% [.] __random_r 2.57 [ 70.5%] 6.85% [.] rand@plt 0.00 [ 0.0%] Jiri Olsa <jolsa@redhat.com> provided the patch to support the --stdio mode. I merged Jiri's code in this patch. $ perf report -s symbol --stdio # Overhead Symbol IPC [IPC Coverage] # ........ ........................... .................... # 39.60% [.] __random 2.30 [ 54.8%] 18.02% [.] main 0.43 [ 54.3%] 14.21% [.] compute_flag 2.29 [100.0%] 14.16% [.] rand 0.36 [100.0%] 7.06% [.] __random_r 2.57 [ 70.5%] 6.85% [.] rand@plt 0.00 [ 0.0%] 0.02% [k] run_timer_softirq 1.60 [ 57.2%] The columns "IPC" and "[IPC Coverage]" are automatically enabled when the sort-key "symbol" is specified. If the perf.data file doesn't contain timed LBR information, columns are filled with "-". For example, # Overhead Symbol IPC [IPC Coverage] # ........ ........................... .................... # 46.57% [.] main - - 17.60% [.] rand - - 15.84% [.] __random_r - - 11.90% [.] __random - - 6.50% [.] compute_flag - - 1.59% [.] rand@plt - - 0.00% [.] _dl_relocate_object - - 0.00% [k] tlb_flush_mmu - - 0.00% [k] perf_event_mmap - - 0.00% [k] native_sched_clock - - 0.00% [k] intel_pmu_handle_irq_v4 - - 0.00% [k] native_write_msr - - v3: --- Removed the sortkey 'ipc' from command-line. The columns "IPC" and "[IPC Coverage]" are automatically enabled when "symbol" is specified. v2: --- Merge in Jiri's patch to support stdio mode Signed-off-by: -
Jin Yao authored
We often use the symbol__annotate2() to annotate a specified symbol. While annotating may take some time, so in order to avoid annotating the same symbol repeatedly, the patch creates a new flag to indicate the symbol has been annotated. Signed-off-by:
-
Jin Yao authored
Add support to 'perf report' annotate view or 'perf annotate --stdio2' to aggregate the IPC derived from timed LBRs per symbol. We compute the average IPC and the IPC coverage percentage. For example: $ perf annotate --stdio2 Percent IPC Cycle (Average IPC: 2.30, IPC Coverage: 54.8%) Disassembly of section .text: 000000000003aac0 <random@@GLIBC_2.2.5>: 8.32 3.28 sub $0x18,%rsp 3.28 mov $0x1,%esi 3.28 xor %eax,%eax 3.28 cmpl $0x0,argp_program_version_hook@@GLIBC_2.2.5+0x1e0 11.57 3.28 1 ↓ je 20 lock cmpxchg %esi,__abort_msg@@GLIBC_PRIVATE+0x8a0 ↓ jne 29 ↓ jmp 43 11.57 1.10 20: cmpxchg %esi,__abort_msg@@GLIBC_PRIVATE+0x8a0 0.00 1.10 1 ↓ je 43 29: lea __abort_msg@@GLIBC_PRIVATE+0x8a0,%rdi sub $0x80,%rsp → callq __lll_lock_wait_private add $0x80,%rsp 0.00 3.00 43: lea __ctype_b@GLIBC_2.2.5+0x38,%rdi 3.00 lea 0xc(%rsp),%rsi 8.49 3.00 1 → callq __random_r 7.91 1.94 cmpl $0x0,argp_program_version_hook@@GLIBC_2.2.5+0x1e0 0.00 1.94 1 ↓ je 68 lock decl __abort_msg@@GLIBC_PRIVATE+0x8a0 ↓ jne 70 ↓ jmp 8a 0.00 2.00 68: decl __abort_msg@@GLIBC_PRIVATE+0x8a0 21.56 2.00 1 ↓ je 8a 70: lea __abort_msg@@GLIBC_PRIVATE+0x8a0,%rdi sub $0x80,%rsp → callq __lll_unlock_wake_private add $0x80,%rsp 21.56 2.90 8a: movslq 0xc(%rsp),%rax 2.90 add $0x18,%rsp 9.03 2.90 1 ← retq It shows for this symbol the average IPC is 2.30 and the IPC coverage is 54.8%. Signed-off-by: -
Tzvetomir Stoyanov authored
This patch adds a sanity check to is_timestamp_in_us() input parameter trace_clock. It avoids a potential segfault in this function for the case trace_clock is NULL. Reported-by:
Slavomir Kaslev <kaslevs@vmware.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
If not, then just use what is in asm-generic. This fixes the build for my sh4, m68k and riscv64 perf test build containers that were failing due to 80ee5668 ("perf beauty: Add a generator for MAP_ mmap's flag constants"), that were not covered in the cset introducing those tools/arch/*/include/uapi/asm/mman.h files. f3539c12 ("tools include: Add uapi mman.h for each architecture") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 80ee5668 ("perf beauty: Add a generator for MAP_ mmap's flag constants") Link: https://lkml.kernel.org/n/tip-rpy9t2e0wxpnum1yvxhreafe@git.kernel.orgSigned-off-by:
-
Alexey Budankov authored
Multi AIO trace writing allows caching more kernel data into userspace memory postponing trace writing for the sake of overall profiling data thruput increase. It could be seen as kernel data buffer extension into userspace memory. With an --aio option value different from 0 (default value is 1) the tool has capability to cache more and more data into user space along with delegating spill to AIO. That allows avoiding to suspend at record__aio_sync() between calls of record__mmap_read_evlist() and increases profiling data thruput at the cost of userspace memory. Signed-off-by:
Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by:
-
Alexey Budankov authored
The trace file offset is read once before mmaps iterating loop and written back after all performance data is enqueued for aio writing. The trace file offset is incremented linearly after every successful aio write operation. record__aio_sync() blocks till completion of the started AIO operation and then proceeds. record__aio_mmap_read_sync() implements a barrier for all incomplete aio write requests. Signed-off-by:
-
Alexey Budankov authored
The map->data buffer is used to preserve map->base profiling data for writing to disk. AIO map->cblock is used to queue corresponding map->data buffer for asynchronous writing. Signed-off-by:
-
Alexey Budankov authored
This will be used by 'perf record' to speed up reading the perf ring buffer. Committer testing: $ make -C tools/perf O=/tmp/build/perf make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] $ ls -la /tmp/build/perf/feature/test-libaio.* -rwxrwxr-x. 1 acme acme 18296 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.bin -rw-rw-r--. 1 acme acme 1165 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.d -rw-rw-r--. 1 acme acme 0 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.make.output $ $ grep -i aio /tmp/build/perf/FEATURE-DUMP feature-libaio=1 $ Signed-off-by: -
Adrian Hunter authored
Users should never use 'pt=0', but if they do it may give a meaningless error: $ perf record -e intel_pt/pt=0/u uname Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u). Fix that by forcing 'pt=1'. Committer testing: # perf record -e intel_pt/pt=0/u uname Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u). /bin/dmesg | grep -i perf may provide additional information. # perf record -e intel_pt/pt=0/u uname pt=0 doesn't make sense, forcing pt=1 Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data ] # Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Tested-by:
-
Arnaldo Carvalho de Melo authored
This basically replicates what was done for 'perf report' in: b226a5a7 ("perf report: Allow user to specify path to kallsyms file") This should help with resolving eBPF symbols, that are in kallsyms but, of course, not in vmlinux. Reported-by:
Ivan Babrou <ibobrik@gmail.com> Tested-by:
-
Wen Yang authored
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)). This makes it more readable and also fix this warning detected by err_cast.cocci: tools/perf/util/bpf-loader.c:1606:11-18: WARNING: ERR_CAST can be used with op Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wen Yang <yellowriver2010@hotmail.com> Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/20181127090610.28488-1-wen.yang99@zte.com.cnSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Add ERR_CAST(), so that tools can use it, just like the kernel. This addresses coccinelle checks that are being performed to tools/ in addition to kernel sources, so lets add this to cover that and to get tools code closer to kernel coding standards. This originally was introduced in the kernel headers in this cset: d1bc8e95 ("Add an ERR_CAST() function to complement ERR_PTR and co.") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Wen Yang <yellowriver2010@hotmail.com> Cc: zhong.weidong@zte.com.cn Link: https://lkml.kernel.org/n/tip-tlt97p066zyhzqhl5jt86og7@git.kernel.orgSigned-off-by:
-
