- 12 Jan, 2024 7 commits
-
-
Lukas Bulwahn authored
As config FRAMEBUFFER_CONSOLE already selects VT_HW_CONSOLE_BINDING, there is no need for any drm driver to repeat that rule for selecting. Remove those duplications of selecting VT_HW_CONSOLE_BINDING. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> [sima: Note that this is only correct since a5ae331e ("drm: Drop select FRAMEBUFFER_CONSOLE for DRM_FBDEV_EMULATION") because select in Kconfig isn't recursive and so needs to be replicated.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240108121757.14069-1-lukas.bulwahn@gmail.com
-
Chen Haonan authored
dev_err_probe() can check if the error code is -EPROBE_DEFER and can return the error code, replacing dev_err() with it simplifies the code. Signed-off-by:
Chen Haonan <chen.haonan2@zte.com.cn> Reviewed-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/3ac20d355b0b3ad3cedb87c8f4efa819a055624b.1702967834.git.chen.haonan2@zte.com.cnSigned-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/3ac20d355b0b3ad3cedb87c8f4efa819a055624b.1702967834.git.chen.haonan2@zte.com.cn
-
Ritesh Kumar authored
Add support for the 1080x2408 Novatek NT36672E video mode DSI panel driver. Signed-off-by:
Ritesh Kumar <quic_riteshk@quicinc.com> Reviewed-by:
-
Ritesh Kumar authored
Document Novatek NT36672E FHD+ LCD DSI panel. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240108095902.22725-2-quic_riteshk@quicinc.comSigned-off-by:
-
Alexander Warnecke authored
The BOE TH101MB31IG002-28A panel is a WXGA panel. It is used in Pine64 PineTab2 and PineTab-V. Signed-off-by:
Alexander Warnecke <awarnecke002@hotmail.com> Signed-off-by:
Manuel Traut <manut@mecka.net> Reviewed-by:
-
Manuel Traut authored
Add bindings for the BOE TH101MB31IG002-28A LCD panel. It is used e.g. in the Pine64 PineTab2 and PineTab-V. Signed-off-by:
-
Alexander Stein authored
At least the pixelclock has a range which can vary. Convert fixed mode into display timings so they can be overwritten in DT if necessary. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
-
- 11 Jan, 2024 4 commits
-
-
Maíra Canal authored
Dump the contents of the DRM MM allocator of the V3D driver. This will help us to debug the VA ranges allocated. Signed-off-by:
Maíra Canal <mcanal@igalia.com> Reviewed-by:
Melissa Wen <mwen@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240105145851.193492-1-mcanal@igalia.com
-
Karolina Stolarek authored
Remove a leftover definition of page order and pass an empty flag value in ttm_pool_pre_populated(). Signed-off-by:
Karolina Stolarek <karolina.stolarek@intel.com> Tested-by:
Amaranath Somalapuram <Amaranath.Somalapuram@amd.com> Reviewed-by:
Dominik Karol Piątkowski <dominik.karol.piatkowski@intel.com> Acked-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/db34f34a039cf951c5933e8ae046b4ed72d20dcb.1704959786.git.karolina.stolarek@intel.comSigned-off-by:
-
Maíra Canal authored
Currently, when using non-blocking commits, we can see the following kernel warning: [ 110.908514] ------------[ cut here ]------------ [ 110.908529] refcount_t: underflow; use-after-free. [ 110.908620] WARNING: CPU: 0 PID: 1866 at lib/refcount.c:87 refcount_dec_not_one+0xb8/0xc0 [ 110.908664] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash aes_arm64 aes_generic algif_skcipher af_alg bnep hid_logitech_hidpp vc4 brcmfmac hci_uart btbcm brcmutil bluetooth snd_soc_hdmi_codec cfg80211 cec drm_display_helper drm_dma_helper drm_kms_helper snd_soc_core snd_compress snd_pcm_dmaengine fb_sys_fops sysimgblt syscopyarea sysfillrect raspberrypi_hwmon ecdh_generic ecc rfkill libaes i2c_bcm2835 binfmt_misc joydev snd_bcm2835(C) bcm2835_codec(C) bcm2835_isp(C) v4l2_mem2mem videobuf2_dma_contig snd_pcm bcm2835_v4l2(C) raspberrypi_gpiomem bcm2835_mmal_vchiq(C) videobuf2_v4l2 snd_timer videobuf2_vmalloc videobuf2_memops videobuf2_common snd videodev vc_sm_cma(C) mc hid_logitech_dj uio_pdrv_genirq uio i2c_dev drm fuse dm_mod drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 110.909086] CPU: 0 PID: 1866 Comm: kodi.bin Tainted: G C 6.1.66-v8+ #32 [ 110.909104] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 110.909114] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 110.909132] pc : refcount_dec_not_one+0xb8/0xc0 [ 110.909152] lr : refcount_dec_not_one+0xb4/0xc0 [ 110.909170] sp : ffffffc00913b9c0 [ 110.909177] x29: ffffffc00913b9c0 x28: 000000556969bbb0 x27: 000000556990df60 [ 110.909205] x26: 0000000000000002 x25: 0000000000000004 x24: ffffff8004448480 [ 110.909230] x23: ffffff800570b500 x22: ffffff802e03a7bc x21: ffffffecfca68c78 [ 110.909257] x20: ffffff8002b42000 x19: ffffff802e03a600 x18: 0000000000000000 [ 110.909283] x17: 0000000000000011 x16: ffffffffffffffff x15: 0000000000000004 [ 110.909308] x14: 0000000000000fff x13: ffffffed577e47e0 x12: 0000000000000003 [ 110.909333] x11: 0000000000000000 x10: 0000000000000027 x9 : c912d0d083728c00 [ 110.909359] x8 : c912d0d083728c00 x7 : 65646e75203a745f x6 : 746e756f63666572 [ 110.909384] x5 : ffffffed579f62ee x4 : ffffffed579eb01e x3 : 0000000000000000 [ 110.909409] x2 : 0000000000000000 x1 : ffffffc00913b750 x0 : 0000000000000001 [ 110.909434] Call trace: [ 110.909441] refcount_dec_not_one+0xb8/0xc0 [ 110.909461] vc4_bo_dec_usecnt+0x4c/0x1b0 [vc4] [ 110.909903] vc4_cleanup_fb+0x44/0x50 [vc4] [ 110.910315] drm_atomic_helper_cleanup_planes+0x88/0xa4 [drm_kms_helper] [ 110.910669] vc4_atomic_commit_tail+0x390/0x9dc [vc4] [ 110.911079] commit_tail+0xb0/0x164 [drm_kms_helper] [ 110.911397] drm_atomic_helper_commit+0x1d0/0x1f0 [drm_kms_helper] [ 110.911716] drm_atomic_commit+0xb0/0xdc [drm] [ 110.912569] drm_mode_atomic_ioctl+0x348/0x4b8 [drm] [ 110.913330] drm_ioctl_kernel+0xec/0x15c [drm] [ 110.914091] drm_ioctl+0x24c/0x3b0 [drm] [ 110.914850] __arm64_sys_ioctl+0x9c/0xd4 [ 110.914873] invoke_syscall+0x4c/0x114 [ 110.914897] el0_svc_common+0xd0/0x118 [ 110.914917] do_el0_svc+0x38/0xd0 [ 110.914936] el0_svc+0x30/0x8c [ 110.914958] el0t_64_sync_handler+0x84/0xf0 [ 110.914979] el0t_64_sync+0x18c/0x190 [ 110.914996] ---[ end trace 0000000000000000 ]--- This happens because, although `prepare_fb` and `cleanup_fb` are perfectly balanced, we cannot guarantee consistency in the check plane->state->fb == state->fb. This means that sometimes we can increase the refcount in `prepare_fb` and don't decrease it in `cleanup_fb`. The opposite can also be true. In fact, the struct drm_plane .state shouldn't be accessed directly but instead, the `drm_atomic_get_new_plane_state()` helper function should be used. So, we could stick to this check, but using `drm_atomic_get_new_plane_state()`. But actually, this check is not really needed. We can increase and decrease the refcount symmetrically without problems. This is going to make the code more simple and consistent. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240105175908.242000-1-mcanal@igalia.com
-
chenxuebing authored
Fix the following errors reported by checkpatch: ERROR: do not use assignment in if condition Signed-off-by:
chenxuebing <chenxb_99091@126.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 10 Jan, 2024 3 commits
-
-
Rodrigo Vivi authored
The last TODO item here that was not marked as done was the display portion, which came along with the pull-request. So, now that Xe is part of drm-next and it includes the display portion, let's entirely kill this RFC here. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Oded Gabbay <ogabbay@kernel.org> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240110190427.63095-1-rodrigo.vivi@intel.comAcked-by:
Lucas De Marchi <lucas.demarchi@intel.com>
-
Jani Nikula authored
Reduce the need for rebuilds when drm_edid.h is modified by including it only where needed. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Yongqin Liu <yongqin.liu@linaro.org> Cc: John Stultz <jstultz@google.com> Signed-off-by:
Andi Shyti <andi.shyti@linux.intel.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240104201632.1100753-2-jani.nikula@intel.com
-
Jani Nikula authored
Including drm_edid.h from nouveau_connector.h causes the rebuild of 15 files when drm_edid.h is modified, while there are only a few files that actually need to include drm_edid.h. Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240104201632.1100753-1-jani.nikula@intel.com
-
- 09 Jan, 2024 5 commits
-
-
Chen Haonan authored
Use kmemdup() helper instead of open-coding to simplify the code. Signed-off-by:
Yang Guang <yang.guang5@zte.com.cn> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
xiazhengqiao authored
To have better compatibility for DP sink, there is a retry mechanism for the link training process to switch between different training process. The original driver code doesn't reset the retry counter when training state is pass. If the system triggers link training over 3 times, there will be a chance to causes the driver to use the wrong training method and return a training fail result. To Fix this, we reset the retry counter when training state is pass each time. Signed-off-by:
Allen Chen <allen.chen@ite.corp-partner.google.com> Signed-off-by:
xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
Dario Binacchi authored
The initialization commands are taken from the STMicroelectronics driver found at [1]. To ensure backward compatibility, flags have been added to enable gamma correction setting and display control. In other cases, registers have been set to their default values according to the specifications found in the datasheet. [1] https://github.com/STMicroelectronics/STM32CubeF7/blob/master/Drivers/BSP/Components/nt35510/Signed-off-by:
Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240108201618.2798649-9-dario.binacchi@amarulasolutions.com
-
Dario Binacchi authored
This patch, preparatory for future developments, move the hardwired parameters to configuration data to allow the addition of new NT35510-based panels. Signed-off-by:
-
Dario Binacchi authored
The patch adds the FRIDA FRD400B25025-A-CTK panel, which belongs to the Novatek NT35510-based panel family. Signed-off-by:
-
- 08 Jan, 2024 12 commits
-
-
Hsin-Yi Wang authored
Some edp panel requires T10 (Delay from end of valid video data transmitted by the Source device to power-off) less than 500ms. Using autosuspend with delay set as 1000 violates this requirement. Use put_sync_suspend in unprepare to meet the spec. For other cases (such as getting EDID), it still uses autosuspend. Suggested-by:
Douglas Anderson <dianders@chromium.org> Fixes: 3235b0f2 ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare") Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
-
Vegard Nossum authored
As of commit b77fdd6a ("scripts/kernel-doc: restore warning for Excess struct/union"), we see the following warnings when running 'make htmldocs': ./include/uapi/drm/nouveau_drm.h:292: warning: Excess struct member 'DRM_NOUVEAU_VM_BIND_OP_MAP' description in 'drm_nouveau_vm_bind_op' ./include/uapi/drm/nouveau_drm.h:292: warning: Excess struct member 'DRM_NOUVEAU_VM_BIND_OP_UNMAP' description in 'drm_nouveau_vm_bind_op' ./include/uapi/drm/nouveau_drm.h:292: warning: Excess struct member 'DRM_NOUVEAU_VM_BIND_SPARSE' description in 'drm_nouveau_vm_bind_op' ./include/uapi/drm/nouveau_drm.h:336: warning: Excess struct member 'DRM_NOUVEAU_VM_BIND_RUN_ASYNC' description in 'drm_nouveau_vm_bind' The problem is that these values are #define constants, but had kerneldoc comments attached to them as if they were actual struct members. There are a number of ways we could fix this, but I chose to draw inspiration from include/uapi/drm/i915_drm.h, which pulls them into the corresponding kerneldoc comment for the struct member that they are intended to be used with. To keep the diff readable, there are a number of things I _didn't_ do in this patch, but which we should also consider: - This is pretty good documentation, but it ends up in gpu/driver-uapi, which is part of subsystem-apis/ when it really ought to display under userspace-api/ (the "Linux kernel user-space API guide" book of the documentation). - More generally, we might want a warning if include/uapi/ files are kerneldoc'd outside userspace-api/. - I'd consider it cleaner if the #defines appeared between the kerneldoc for the member and the member itself (which is something other DRM- related UAPI docs do). - The %IDENTIFIER kerneldoc syntax is intended for "constants", and is more appropriate in this context than ``IDENTIFIER`` or &IDENTIFIER. The DRM docs aren't very consistent on this. Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
-
Randy Dunlap authored
Change kernel-doc "/**" comments to common "/*" comments to prevent kernel-doc warnings: gk20a.c:49: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cvb_mv = ((c2 * speedo / s_scale + c1) * speedo / s_scale + c0) gk20a.c:49: warning: missing initial short description on line: * cvb_mv = ((c2 * speedo / s_scale + c1) * speedo / s_scale + c0) gk20a.c:62: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cvb_t_mv = gk20a.c:62: warning: missing initial short description on line: * cvb_t_mv = Signed-off-by:
-
Randy Dunlap authored
Change kernel-doc "/**" comments to common "/*" comments to prevent kernel-doc warnings: gf100.c:1044: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Wait until GR goes idle. GR is considered idle if it is disabled by the gf100.c:1044: warning: missing initial short description on line: * Wait until GR goes idle. GR is considered idle if it is disabled by the Signed-off-by:
-
Randy Dunlap authored
Change kernel-doc "/**" comments to common "/*" comments to prevent kernel-doc warnings: nouveau_ioc32.c:2: warning: Cannot understand * \file mga_ioc32.c on line 2 - I thought it was a doc line nouveau_ioc32.c:52: warning: Function parameter or member 'filp' not described in 'nouveau_compat_ioctl' nouveau_ioc32.c:52: warning: Function parameter or member 'cmd' not described in 'nouveau_compat_ioctl' nouveau_ioc32.c:52: warning: Function parameter or member 'arg' not described in 'nouveau_compat_ioctl' nouveau_ioc32.c:52: warning: expecting prototype for Called whenever a 32-bit process running under a 64(). Prototype was for nouveau_compat_ioctl() instead Signed-off-by:
-
Randy Dunlap authored
Change kernel-doc "/**" comments to common "/*" comments to prevent kernel-doc warnings: crtc.c:453: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Sets up registers for the given mode/adjusted_mode pair. crtc.c:453: warning: missing initial short description on line: * Sets up registers for the given mode/adjusted_mode pair. crtc.c:629: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Sets up registers for the given mode/adjusted_mode pair. crtc.c:629: warning: missing initial short description on line: * Sets up registers for the given mode/adjusted_mode pair. Signed-off-by:
-
Randy Dunlap authored
The "/**" comments in this file are not kernel-doc comments. They are used on static functions which can have kernel-doc comments, but that is not the primary focus of kernel-doc comments. Since these comments are incomplete for kernel-doc notation, remove the kernel-doc "/**" markers and make them common comments. This prevents scripts/kernel-doc from issuing 68 warnings: init.c:584: warning: Function parameter or member 'init' not described in 'init_reserved' and 67 warnings like this one: init.c:611: warning: expecting prototype for INIT_DONE(). Prototype was for init_done() instead Signed-off-by:
-
Jani Nikula authored
Remove the unused drm_connector_helper_get_modes_from_ddc() function. Most drivers should probably have this functionality split to detect and get modes parts, so the helper is not the best abstraction. Suggested-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Jani Nikula authored
Convert mgag200_vga_connector_helper_get_modes() to use struct drm_edid based functions directly. Suggested-by:
-
Thomas Zimmermann authored
I/O video memory for the framebuffer supports write-combine caching mode. Simplify the driver's code that sets up the caching mode. * Map video memory with ioremap_wc(), which automatically sets up the PAT entry with write-combine caching. * Remove the now obsolete call to devm_arch_io_reserve_memtype_wc(). It is only required to mmap the video memory to user space, which the driver doesn't do. * According to the PAT documentation, arch_phys_wc_add() is best called after remapping I/O memory, so move it after ioremap. Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240105082714.21881-1-tzimmermann@suse.de
-
Markus Elfring authored
Return an error code without storing it in an intermediate variable. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Link: https://patchwork.freedesktop.org/patch/msgid/85f8004e-f0c9-42d9-8c59-30f1b4e0b89e@web.deReviewed-by:
Luben Tuikov <ltuikov89@gmail.com> Signed-off-by:
-
Markus Elfring authored
The kfree() function was called in one case by the drm_sched_init() function during error handling even if the passed data structure member contained a null pointer. This issue was detected by using the Coccinelle software. Thus adjust a jump target. Signed-off-by:
-
- 05 Jan, 2024 2 commits
-
-
Javier Martinez Canillas authored
The helper is generic, it doesn't use the opaque EDID type struct drm_edid and is also used by drivers that only support non-probeable displays such as fixed panels. These drivers add a list of modes using drm_mode_probed_add() and then set a preferred mode using the drm_set_preferred_mode() helper. It seems more logical to have the helper definition in drm_modes.o instead of drm_edid.o, since the former contains modes helper while the latter has helpers to manage the EDID information. Since both drm_edid.o and drm_modes.o object files are built-in the drm.o object, there are no functional changes. But besides being a more logical place for this helper, it could also allow to eventually make drm_edid.o optional and not included in drm.o if only fixed panels must be supported in a given system. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Jani Nikula authored
There's no need to include either linux/hdmi.h or drm/drm_mode.h. They can be removed by using forward declarations. While at it, group the forward declarations together, and remove the unnecessary ones. Signed-off-by:
-
- 04 Jan, 2024 7 commits
-
-
Quentin Schulz authored
This is only a cosmetic change. This replaces a hand-crafted EPROBE_DEFER handling for deciding to print an error message with dev_err_probe. A side-effect is that dev_err_probe also adds a debug message when it's not EPROBE_DEFER, but this is seen as an improvement. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by:
Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240104-ltk-dev_err_probe-v1-2-8ef3c0b585d8@theobroma-systems.com
-
Quentin Schulz authored
devm_gpiod_get_optional may return EPROBE_DEFER in case the GPIO controller isn't yet probed when the panel driver is being probed. In that case, a spurious and confusing error message about not being able to get the reset GPIO is printed even though later on the device actually manages to get probed. Use dev_err_probe instead so that the message is only printed when it truly matters. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by:
-
Quentin Schulz authored
This scary message can misled the user into thinking something bad has happened and needs to be fixed, however it could simply be part of a normal boot process where EPROBE_DEFER is taken into account. Therefore, let's use dev_err_probe so that this message doesn't get shown (by default) when the return code is EPROBE_DEFER. Fixes: 34cc0aa2 ("drm/rockchip: Add support for Rockchip Soc LVDS") Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by:
-
Quentin Schulz authored
ret variable stores the return value of drm_of_find_panel_or_bridge which can return error codes different from EPROBE_DEFER. Therefore, let's just return that error code instead of forcing it to EPROBE_DEFER. Fixes: 34cc0aa2 ("drm/rockchip: Add support for Rockchip Soc LVDS") Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by:
-
Alex Bee authored
Now that we have proper pixelclock-based mode validation we can drop the custom fill_modes hook. CRTC size validation for the display controller has been added with Commit 8e140cb6 ("drm/rockchip: vop: limit maximum resolution to hardware capabilities") Signed-off-by:
Alex Bee <knaerzche@gmail.com> Reviewed-by:
-
Alex Bee authored
As per TRM this controller supports pixelclocks starting from 25 MHz. The maximum supported pixelclocks are defined by the phy configurations we have. Also it can't support modes that require doubled clocks. If the variant has a phy reference clock we can additionally validate against VESA DMT'srecommendations. Signed-off-by:
-
Alex Bee authored
This variant requires the phy reference clock to be enabled before the DDC block can work and the (initial) DDC bus frequency is calculated based on the rate of this clock. Besides the only difference is phy configuration required to make the driver working for this variant as well. Signed-off-by:
-
