- 27 Mar, 2020 4 commits
-
-
Steven Rostedt (VMware) authored
Have the ring_buffer_iterator set a flag if events were dropped as it were to go and peek at the next event. Have the trace file display this fact if it happened with a "LOST EVENTS" message. Link: http://lkml.kernel.org/r/20200317213417.045858900@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
When opening the "trace" file, it is no longer necessary to disable tracing. Note, a new option is created called "pause-on-trace", when set, will cause the trace file to emulate its original behavior. Link: http://lkml.kernel.org/r/20200317213416.903351225@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Now that the iterator can handle a concurrent writer, do not disable writing to the ring buffer when there is an iterator present. Link: http://lkml.kernel.org/r/20200317213416.759770696@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
When the ring buffer becomes writable for even when the trace file is read, it must still not be resized. But since tracers can be activated while the trace file is being read, the irqsoff tracer can modify the per CPU buffers, and this can cause the reader of the trace file to update the wrong buffer's resize disable bit, as the irqsoff tracer swaps out cpu buffers. By making the resize disable per cpu_buffer, it makes the update follow the per cpu_buffer even if it's swapped out with the snapshot buffer and keeps the release of the trace file modifying the same data as the open did. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 19 Mar, 2020 9 commits
-
-
Steven Rostedt (VMware) authored
As it is fine to perform several "peeks" of event data in the ring buffer via the iterator before moving it forward, do not re-read the event, just return what was read before. Otherwise, it can cause inconsistent results, especially when testing multiple CPU buffers to interleave them. Link: http://lkml.kernel.org/r/20200317213416.592032170@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
As the iterator will be reading a live buffer, and if the event being read is on a page that a writer crosses, it will fail and try again, the condition in rb_iter_peek() that only allows a retry to happen three times is no longer valid. Allow rb_iter_peek() to retry more than three times without killing the ring buffer, but only if rb_iter_head_event() had failed at least once. Link: http://lkml.kernel.org/r/20200317213416.452888193@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Have the ring_buffer_iter structure have a place to store an event, such that it can not be overwritten by a writer, and load it in such a way via rb_iter_head_event() that it will return NULL and reset the iter to the start of the current page if a writer updated the page. Link: http://lkml.kernel.org/r/20200317213416.306959216@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Have the ring_buffer_iter structure contain a page_stamp, such that it can be used to see if the writer entered the page the iterator is on. When going to a new page, the iterator will record the time stamp of that page. When reading events, it can copy the event to an internal buffer on the iterator (to be implemented later), then check the page's time stamp with its own to see if the writer entered the page. If so, it will need to try to read the event again. Link: http://lkml.kernel.org/r/20200317213416.163549674@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
When the ring buffer was first created, the iterator followed the normal producer/consumer operations where it had both a peek() operation, that just returned the event at the current location, and a read(), that would return the event at the current location and also increment the iterator such that the next peek() or read() will return the next event. The only use of the ring_buffer_read() is currently to move the iterator to the next location and nothing now actually reads the event it returns. Rename this function to its actual use case to ring_buffer_iter_advance(), which also adds the "iter" part to the name, which is more meaningful. As the timestamp returned by ring_buffer_read() was never used, there's no reason that this new version should bother having returning it. It will also become a void function. Link: http://lkml.kernel.org/r/20200317213416.018928618@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
It was complained about that when the trace file is read, that the tracing is disabled, as the iterator expects writing to the buffer it reads is not updated. Several steps are needed to make the iterator handle a writer, by testing if things have changed as it reads. This step is to make ring_buffer_empty() expect the buffer to be changing. Note if the current location of the iterator is overwritten, then it will return false as new data is being added. Note, that this means that data will be skipped. Link: http://lkml.kernel.org/r/20200317213415.870741809@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
In order to have the iterator read the buffer even when it's still updating, it requires that the ring buffer iterator saves each event in a separate location outside the ring buffer such that its use is immutable. There's one use case that saves off the event returned from the ring buffer interator and calls it again to look at the next event, before going back to use the first event. As the ring buffer iterator will only have a single copy, this use case will no longer be supported. Instead, have the one use case create its own buffer to store the first event when looking at the next event. This way, when looking at the first event again, it wont be corrupted by the second read. Link: http://lkml.kernel.org/r/20200317213415.722539921@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The ftrace selftest "ftrace - test for function traceon/off triggers" enables all events and reads the trace file. Now that the trace file does not disable tracing, and will attempt to continually read new data that is added, the selftest gets stuck reading the trace file. This is because the data added to the trace file will fill up quicker than the reading of it. By only enabling scheduling events, the read can keep up with the writes. Instead of enabling all events, only enable the scheduler events. Link: http://lkml.kernel.org/r/20200318111345.0516642e@gandalf.local.home Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: linux-kselftest@vger.kernel.org Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Nathan Chancellor authored
Clang warns: ../kernel/trace/trace.c:9335:33: warning: array comparison always evaluates to true [-Wtautological-compare] if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt) ^ 1 warning generated. These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the runtime result of the check (tested with some print statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU). Link: http://lkml.kernel.org/r/20200220051011.26113-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/893Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 03 Mar, 2020 5 commits
-
-
Yiwei Zhang authored
This change adds the below gpu memory tracepoint: gpu_mem/gpu_mem_total: track global or proc gpu memory total usages Per process tracking of total gpu memory usage in the gem layer is not appropriate and hard to implement with trivial overhead. So for the gfx device driver layer to track total gpu memory usage both globally and per process in an easy and uniform way is to integrate the tracepoint in this patch to the underlying varied implementations of gpu memory tracking system from vendors. Putting this tracepoint in the common trace events can not only help wean the gfx drivers off of debugfs but also greatly help the downstream Android gpu vendors because debugfs is to be deprecated in the upcoming Android release. Then the gpu memory tracking of both Android kernel and the upstream linux kernel can stay closely, which can benefit the whole kernel eco-system in the long term. Link: http://lkml.kernel.org/r/20200302235044.59163-1-zzyiwei@google.comAcked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yiwei Zhang <zzyiwei@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Masami Hiramatsu authored
Show line and column when we got a parse error in bootconfig tool. Current lib/bootconfig shows the parse error with byte offset, but that is not human readable. This makes xbc_init() not showing error message itself but able to pass the error message and position to caller, so that the caller can decode it and show the error message with line number and columns. With this patch, bootconfig tool shows an error with line:column as below. $ cat samples/bad-dotword.bconf # do not start keyword with . key { .word = 1 } $ ./bootconfig -a samples/bad-dotword.bconf initrd Parse Error: Invalid keyword at 3:3 Link: http://lkml.kernel.org/r/158323469002.10560.4023923847704522760.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Masami Hiramatsu authored
Support O=<builddir> option to build bootconfig tool in the other directory. As same as other tools, if you specify O=<builddir>, bootconfig command is build under <builddir>. Link: http://lkml.kernel.org/r/158323468033.10560.14661631369326294355.stgit@devnote2Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Commit 567cd4da ("ring-buffer: User context bit recursion checking") added the TRACE_BUFFER bits to be used in the current task's trace_recursion field. But the final submission of the logic removed the use of those bits, but never removed the bits themselves (they were never used in upstream Linux). These can be safely removed. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The hwlat tracer runs a loop of width time during a given window. It then reports the max latency over a given threshold and records a timestamp. But this timestamp is the time after the width has finished, and not the time it actually triggered. Record the actual time when the latency was greater than the threshold as well as the number of times it was greater in a given width per window. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 01 Mar, 2020 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Two more bug fixes (including a regression) for 5.6" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: potential crash on allocation error in ext4_alloc_flex_bg_array() jbd2: fix data races at struct journal_head
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "More bugfixes, including a few remaining "make W=1" issues such as too large frame sizes on some configurations. On the ARM side, the compiler was messing up shadow stacks between EL1 and EL2 code, which is easily fixed with __always_inline" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: check descriptor table exits on instruction emulation kvm: x86: Limit the number of "kvm: disabled by bios" messages KVM: x86: avoid useless copy of cpufreq policy KVM: allow disabling -Werror KVM: x86: allow compiling as non-module with W=1 KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis KVM: Introduce pv check helpers KVM: let declaration of kvm_get_running_vcpus match implementation KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter arm64: Ask the compiler to __always_inline functions used by KVM at HYP KVM: arm64: Define our own swab32() to avoid a uapi static inline KVM: arm64: Ask the compiler to __always_inline functions used at HYP kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe() KVM: arm/arm64: Fix up includes for trace.h
-
Oliver Upton authored
KVM emulates UMIP on hardware that doesn't support it by setting the 'descriptor table exiting' VM-execution control and performing instruction emulation. When running nested, this emulation is broken as KVM refuses to emulate L2 instructions by default. Correct this regression by allowing the emulation of descriptor table instructions if L1 hasn't requested 'descriptor table exiting'. Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode") Reported-by: Jan Kiszka <jan.kiszka@web.de> Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has three driver bugfixes for you. We agreed on the Mac regression to go in via I2C" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: macintosh: therm_windtunnel: fix regression when instantiating devices i2c: altera: Fix potential integer overflow i2c: jz4780: silence log flood on txabrt
-
- 29 Feb, 2020 4 commits
-
-
Dan Carpenter authored
If sbi->s_flex_groups_allocated is zero and the first allocation fails then this code will crash. The problem is that "i--" will set "i" to -1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1 is type promoted to unsigned and becomes UINT_MAX. Since UINT_MAX is more than zero, the condition is true so we call kvfree(new_groups[-1]). The loop will carry on freeing invalid memory until it crashes. Fixes: 7c990728 ("ext4: fix potential race between s_flex_groups online resizing and access") Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountainSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Wolfram Sang authored
Removing attach_adapter from this driver caused a regression for at least some machines. Those machines had the sensors described in their DT, too, so they didn't need manual creation of the sensor devices. The old code worked, though, because manual creation came first. Creation of DT devices then failed later and caused error logs, but the sensors worked nonetheless because of the manually created devices. When removing attach_adaper, manual creation now comes later and loses the race. The sensor devices were already registered via DT, yet with another binding, so the driver could not be bound to it. This fix refactors the code to remove the race and only manually creates devices if there are no DT nodes present. Also, the DT binding is updated to match both, the DT and manually created devices. Because we don't know which device creation will be used at runtime, the code to start the kthread is moved to do_probe() which will be called by both methods. Fixes: 3e7bed52 ("macintosh: therm_windtunnel: drop using attach_adapter") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723Reported-by: Erhard Furtner <erhard_f@mailbox.org> Tested-by: Erhard Furtner <erhard_f@mailbox.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org # v4.19+
-
Qian Cai authored
journal_head::b_transaction and journal_head::b_next_transaction could be accessed concurrently as noticed by KCSAN, LTP: starting fsync04 /dev/zero: Can't open blockdev EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) ================================================================== BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2] write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70: __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2] __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569 jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2] (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034 kjournald2+0x13b/0x450 [jbd2] kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68: jbd2_write_access_granted+0x1b2/0x250 [jbd2] jbd2_write_access_granted at fs/jbd2/transaction.c:1155 jbd2_journal_get_write_access+0x2c/0x60 [jbd2] __ext4_journal_get_write_access+0x50/0x90 [ext4] ext4_mb_mark_diskspace_used+0x158/0x620 [ext4] ext4_mb_new_blocks+0x54f/0xca0 [ext4] ext4_ind_map_blocks+0xc79/0x1b40 [ext4] ext4_map_blocks+0x3b4/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block+0x3b/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe 5 locks held by fsync04/25724: #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260 #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4] #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4] #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2] irq event stamp: 1407125 hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 The plain reads are outside of jh->b_state_lock critical section which result in data races. Fix them by adding pairs of READ|WRITE_ONCE(). Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pwSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four small fixes. Three are in drivers for fairly obvious bugs. The fourth is a set of regressions introduced by the compat_ioctl changes because some of the compat updates wrongly replaced .ioctl instead of .compat_ioctl" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places scsi: zfcp: fix wrong data and display format of SFP+ temperature scsi: sd_sbc: Fix sd_zbc_report_zones() scsi: libfc: free response frame from GPN_ID
-
- 28 Feb, 2020 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Fix build issue on 32-bit ARM with old compilers (Marek Szyprowski) - Update MAINTAINERS for recent Cadence driver file move (Lukas Bulwahn) * tag 'pci-v5.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Correct Cadence PCI driver path PCI: brcmstb: Fix build on 32bit ARM platforms with older compilers
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Passthrough insertion fix (Ming) - Kill off some unused arguments (John) - blktrace RCU fix (Jan) - Dead fields removal for null_blk (Dongli) - NVMe polled IO fix (Bijan) * tag 'block-5.6-2020-02-28' of git://git.kernel.dk/linux-block: nvme-pci: Hold cq_poll_lock while completing CQEs blk-mq: Remove some unused function arguments null_blk: remove unused fields in 'nullb_cmd' blktrace: Protect q->blk_trace with RCU blk-mq: insert passthrough request into hctx->dispatch directly
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Fix for a race with IOPOLL used with SQPOLL (Xiaoguang) - Only show ->fdinfo if procfs is enabled (Tobias) - Fix for a chain with multiple personalities in the SQEs - Fix for a missing free of personality idr on exit - Removal of the spin-for-work optimization - Fix for next work lookup on request completion - Fix for non-vec read/write result progation in case of links - Fix for a fileset references on switch - Fix for a recvmsg/sendmsg 32-bit compatability mode * tag 'io_uring-5.6-2020-02-28' of git://git.kernel.dk/linux-block: io_uring: fix 32-bit compatability with sendmsg/recvmsg io_uring: define and set show_fdinfo only if procfs is enabled io_uring: drop file set ref put/get on switch io_uring: import_single_range() returns 0/-ERROR io_uring: pick up link work on submit reference drop io-wq: ensure work->task_pid is cleared on init io-wq: remove spin-for-work optimization io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL io_uring: fix personality idr leak io_uring: handle multiple personalities in link chains
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fix from Keith. * 'nvme-5.6-rc4' of git://git.infradead.org/nvme: nvme-pci: Hold cq_poll_lock while completing CQEs
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "Fix a couple of configuration issues in the ACPI watchdog (WDAT) driver (Mika Westerberg) and make it possible to disable that driver at boot time in case it still does not work as expected (Jean Delvare)" * tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: watchdog: Set default timeout in probe ACPI: watchdog: Fix gas->access_width usage ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro ACPI: watchdog: Allow disabling WDAT at boot
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "Fix a recent cpufreq initialization regression (Rafael Wysocki), revert a devfreq commit that made incompatible changes and broke user land on some systems (Orson Zhai), drop a stale reference to a document that has gone away recently (Jonathan Neuschäfer), and fix a typo in a hibernation code comment (Alexandre Belloni)" * tag 'pm-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Fix policy initialization for internal governor drivers Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs" PM / hibernate: fix typo "reserverd_size" -> "reserved_size" Documentation: power: Drop reference to interface.rst
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs fixes from Damien Le Moal: "Two fixes in here: - Revert the initial decision to silently ignore IOCB_NOWAIT for asynchronous direct IOs to sequential zone files. Instead, return an error to the user to signal that the feature is not supported (from Christoph) - A fix to zonefs Kconfig to select FS_IOMAP to avoid build failures if no other file system already selected this option (from Johannes)" * tag 'zonefs-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: select FS_IOMAP zonefs: fix IOCB_NOWAIT handling
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.6, take #1 - Fix compilation on 32bit - Move VHE guest entry/exit into the VHE-specific entry code - Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
-
Erwan Velu authored
In older version of systemd(219), at boot time, udevadm is called with : /usr/bin/udevadm trigger --type=devices --action=add" This program generates an echo "add" in /sys/devices/system/cpu/cpu<x>/uevent, leading to the "kvm: disabled by bios" message in case of your Bios disabled the virtualization extensions. On a modern system running up to 256 CPU threads, this pollutes the Kernel logs. This patch offers to ratelimit this message to avoid any userspace program triggering this uevent printing this message too often. This patch is only a workaround but greatly reduce the pollution without breaking the current behavior of printing a message if some try to instantiate KVM on a system that doesn't support it. Note that recent versions of systemd (>239) do not have trigger this behavior. This patch will be useful at least for some using older systemd with recent Kernels. Signed-off-by: Erwan Velu <e.velu@criteo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Rafael J. Wysocki authored
* pm-sleep: PM / hibernate: fix typo "reserverd_size" -> "reserved_size" Documentation: power: Drop reference to interface.rst * pm-devfreq: Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
-
Paolo Bonzini authored
struct cpufreq_policy is quite big and it is not a good idea to allocate one on the stack. Just use cpufreq_cpu_get and cpufreq_cpu_put which is even simpler. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Restrict -Werror to well-tested configurations and allow disabling it via Kconfig. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Valdis Klētnieks authored
Compile error with CONFIG_KVM_INTEL=y and W=1: CC arch/x86/kvm/vmx/vmx.o arch/x86/kvm/vmx/vmx.c:68:32: error: 'vmx_cpu_id' defined but not used [-Werror=unused-const-variable=] 68 | static const struct x86_cpu_id vmx_cpu_id[] = { | ^~~~~~~~~~ cc1: all warnings being treated as errors When building with =y, the MODULE_DEVICE_TABLE macro doesn't generate a reference to the structure (or any code at all). This makes W=1 compiles unhappy. Wrap both in a #ifdef to avoid the issue. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> [Do the same for CONFIG_KVM_AMD. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-