- 22 Apr, 2021 14 commits
-
-
Ravi Bangoria authored
perf-hwbreak selftest opens hw-breakpoint event at multiple places for which it has same code repeated. Coalesce that code into a function. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210412112218.128183-3-ravi.bangoria@linux.ibm.com
-
Ravi Bangoria authored
Message-ID: <20210412112218.128183-2-ravi.bangoria@linux.ibm.com> (raw) Add selftests to test multiple active DAWRs with ptrace interface. Sample o/p: $ ./ptrace-hwbreak ... PPC_PTRACE_SETHWDEBUG 2, MODE_RANGE, DW ALIGNED, WO, len: 6: Ok PPC_PTRACE_SETHWDEBUG 2, MODE_RANGE, DW UNALIGNED, RO, len: 6: Ok PPC_PTRACE_SETHWDEBUG 2, MODE_RANGE, DAWR Overlap, WO, len: 6: Ok PPC_PTRACE_SETHWDEBUG 2, MODE_RANGE, DAWR Overlap, RO, len: 6: Ok Signed-off-by:
Daniel Axtens <dja@axtens.net> [mpe: Fix build on older distros] Signed-off-by:
-
Michael Ellerman authored
This is an IBM specific driver that we should enable to get some build/boot testing. Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Also based on the RFI and entry flush tests, it counts the L1D misses by doing a syscall that does user access: uname, in this case. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> [dja: forward port, rename function] Signed-off-by:
-
Christophe Leroy authored
AS arch/powerpc/platforms/52xx/lite5200_sleep.o arch/powerpc/platforms/52xx/lite5200_sleep.S: Assembler messages: arch/powerpc/platforms/52xx/lite5200_sleep.S:184: Warning: invalid register expression In the following code, 'addi' is wrong, has to be 'add' /* local udelay in sram is needed */ udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */ mullw r12, r12, r11 mftb r13 /* start */ addi r12, r13, r12 /* end */ Fixes: ee983079 ("[POWERPC] MPC5200 low power mode") Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Nicholas Piggin authored
The memory ordering comment no longer applies, because mm_ctx_id is no longer used anywhere. At best always been difficult to follow. It's better to consider the load on which the slbmte depends on, which the MMU depends on before it can start loading TLBs, rather than a store which may or may not have a subsequent dependency chain to the slbmte. So update the comment and we use the load of the mm's user context ID. This is much more analogous the radix ordering too, which is good. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Athira Rajeev authored
Memory events (mem-loads and mem-stores) currently use the threshold event selection as issue to finish. Power10 supports issue to complete as part of thresholding which is more appropriate for mem-loads and mem-stores. Hence fix the event code for memory events to use issue to complete. Fixes: a64e697c ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by:
-
Athira Rajeev authored
Sampled Instruction Event Register (SIER) field [46:48] identifies the sampled instruction type. ISA v3.1 says value of 0b111 for this field as reserved, but in POWER10 it denotes LARX/STCX type which will hopefully be fixed in ISA v3.1 update. Patch fixes the functions to handle type value 7 for CPU_FTR_ARCH_31. Fixes: a64e697c ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by:
-
Christophe Leroy authored
[ 0.000000] ioremap() called early from find_legacy_serial_ports+0x3cc/0x474. Use early_ioremap() instead find_legacy_serial_ports() is called early from setup_arch(), before paging_init(). vmalloc is not available yet, ioremap shouldn't be used that early. Use early_ioremap() and switch to a regular ioremap() later. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
-
Christophe Leroy authored
At the time being, the fixmap area is defined at the top of the address space or just below KASAN. This definition is not valid for PPC64. For PPC64, use the top of the I/O space. Because of circular dependencies, it is not possible to include asm/fixmap.h in asm/book3s/64/pgtable.h , so define a fixed size AREA at the top of the I/O space for fixmap and ensure during build that the size is big enough. Fixes: 265c3491 ("powerpc: Add support for GENERIC_EARLY_IOREMAP") Signed-off-by:
-
Randy Dunlap authored
On a kernel config with ALTIVEC=y and PPC_FPU not set/enabled, there are build errors: drivers/cpufreq/pmac32-cpufreq.c:262:2: error: implicit declaration of function 'enable_kernel_fp' [-Werror,-Wimplicit-function-declaration] enable_kernel_fp(); ../arch/powerpc/lib/sstep.c: In function 'do_vec_load': ../arch/powerpc/lib/sstep.c:637:3: error: implicit declaration of function 'put_vr' [-Werror=implicit-function-declaration] 637 | put_vr(rn, &u.v); | ^~~~~~ ../arch/powerpc/lib/sstep.c: In function 'do_vec_store': ../arch/powerpc/lib/sstep.c:660:3: error: implicit declaration of function 'get_vr'; did you mean 'get_oc'? [-Werror=implicit-function-declaration] 660 | get_vr(rn, &u.v); | ^~~~~~ In theory ALTIVEC is independent of PPC_FPU but in practice nobody is going to build such a machine, so make ALTIVEC require PPC_FPU by selecting it. Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Michael Ellerman authored
FA_DUMP (Firmware Assisted Dump) is a powerpc only feature that should be enabled in our defconfig to get some build / test coverage. Signed-off-by:
-
Michael Ellerman authored
opal_mpipl_query_tag() takes a pointer to a 64-bit value, which firmware writes a value to. As OPAL is traditionally big endian this value will be big endian. This can be confirmed by looking at the implementation in skiboot: static uint64_t opal_mpipl_query_tag(enum opal_mpipl_tags tag, __be64 *tag_val) { ... *tag_val = cpu_to_be64(opal_mpipl_tags[tag]); return OPAL_SUCCESS; } Fix the declaration to annotate that the value is big endian. Signed-off-by: -
Michael Ellerman authored
Sparse says: arch/powerpc/kernel/fadump.c:48:16: warning: symbol 'fadump_kobj' was not declared. Should it be static? arch/powerpc/kernel/fadump.c:55:27: warning: symbol 'crash_mrange_info' was not declared. Should it be static? arch/powerpc/kernel/fadump.c:61:27: warning: symbol 'reserved_mrange_info' was not declared. Should it be static? arch/powerpc/kernel/fadump.c:83:12: warning: symbol 'fadump_cma_init' was not declared. Should it be static? And indeed none of them are used outside this file, they can all be made static. Also fadump_kobj needs to be moved inside the ifdef where it's used. Signed-off-by:
-
- 21 Apr, 2021 16 commits
-
-
Christophe Leroy authored
When probe_kernel_read_inst() was created, there was no good place to put it, so a file called lib/inst.c was dedicated for it. Since then, probe_kernel_read_inst() has been renamed copy_inst_from_kernel_nofault(). And mm/maccess.h didn't exist at that time. Today, mm/maccess.h is related to copy_from_kernel_nofault(). Move copy_inst_from_kernel_nofault() into mm/maccess.c Signed-off-by:
-
Christophe Leroy authored
When probe_kernel_read_inst() was created, it was to mimic probe_kernel_read() function. Since then, probe_kernel_read() has been renamed copy_from_kernel_nofault(). Rename probe_kernel_read_inst() into copy_inst_from_kernel_nofault(). Signed-off-by:
-
Christophe Leroy authored
We have two independant versions of probe_kernel_read_inst(), one for PPC32 and one for PPC64. The PPC32 is identical to the first part of the PPC64 version. The remaining part of PPC64 version is not relevant for PPC32, but not contradictory, so we can easily have a common function with the PPC64 part opted out via a IS_ENABLED(CONFIG_PPC64). The only need is to add a version of ppc_inst_prefix() for PPC32. Signed-off-by:
-
Christophe Leroy authored
Its name comes from former probe_user_read() function. That function is now called copy_from_user_nofault(). probe_user_read_inst() uses copy_from_user_nofault() to read only a few bytes. It is suboptimal. It does the same as get_user_inst() but in addition disables page faults. But on the other hand, it is not used for the time being. So remove it for now. If one day it is really needed, we can give it a new name more in line with today's naming, and implement it using get_user_inst() Signed-off-by:
-
Christophe Leroy authored
If the target of a function call is within 32 Mbytes distance, use a standard function call with 'bl' instead of the 'lis/ori/mtlr/blrl' sequence. In the first pass, no memory has been allocated yet and the code position is not known yet (image pointer is NULL). This pass is there to calculate the amount of memory to allocate for the EBPF code, so assume the 4 instructions sequence is required, so that enough memory is allocated. Signed-off-by:
-
Christophe Leroy authored
Re-implement BPF_ALU64 | BPF_{LSH/RSH/ARSH} | BPF_X with branchless implementation copied from misc_32.S. Signed-off-by: -
Christophe Leroy authored
Replace <<== by <<= Signed-off-by:
-
Christophe Leroy authored
wrtspr() is a function to write an arbitrary value in a special register. It is used on 8xx to write to SPRN_NRI, SPRN_EID and SPRN_EIE. Writing any value to one of those will play with MSR EE and MSR RI regardless of that value. r0 is used many places in the generated code and using r0 for that creates an unnecessary dependency of this instruction with preceding ones using r0 in a few places in vmlinux. r2 is most likely the most stable register as it contains the pointer to 'current'. Using r2 instead of r0 avoids that unnecessary dependency. Signed-off-by:
-
Christophe Leroy authored
On powerpc: - VDSO library is named linux-vdso32.so.1 or linux-vdso64.so.1 - clock_gettime is named __kernel_clock_gettime() Ensure gettime_perf tries these names before giving up. Signed-off-by:
-
Ganesh Goudar authored
When we hit an UE while using machine check safe copy routines, ignore_event flag is set and the event is ignored by mce handler, And the flag is also saved for defered handling and printing of mce event information, But as of now saving of this flag is done on checking if the effective address is provided or physical address is calculated, which is not right. Save ignore_event flag regardless of whether the effective address is provided or physical address is calculated. Without this change following log is seen, when the event is to be ignored. [ 512.971365] MCE: CPU1: machine check (Severe) UE Load/Store [Recovered] [ 512.971509] MCE: CPU1: NIP: [c0000000000b67c0] memcpy+0x40/0x90 [ 512.971655] MCE: CPU1: Initiator CPU [ 512.971739] MCE: CPU1: Unknown [ 512.972209] MCE: CPU1: machine check (Severe) UE Load/Store [Recovered] [ 512.972334] MCE: CPU1: NIP: [c0000000000b6808] memcpy+0x88/0x90 [ 512.972456] MCE: CPU1: Initiator CPU [ 512.972534] MCE: CPU1: Unknown Signed-off-by:
Ganesh Goudar <ganeshgr@linux.ibm.com> Reviewed-by:
Santosh Sivaraj <santosh@fossix.org> Signed-off-by:
-
Christophe Leroy authored
For that, create a 32 bits version of patch_imm64_load_insns() and create a patch_imm_load_insns() which calls patch_imm32_load_insns() on PPC32 and patch_imm64_load_insns() on PPC64. Adapt optprobes_head.S for PPC32. Use PPC_LL/PPC_STL macros instead of raw ld/std, opt out things linked to paca and use stmw/lmw to save/restore registers. Signed-off-by:
-
Christophe Leroy authored
In order to simplify use on PPC32, change ppc_inst_as_u64() into ppc_inst_as_ulong() that returns the 32 bits instruction on PPC32. Will be used when porting OPTPROBES to PPC32. Signed-off-by:
-
Christophe Leroy authored
This patch makes use of trap types in irq.c Signed-off-by:
-
Christophe Leroy authored
This patch makes use of trap types in head_book3s_32.S Signed-off-by:
-
Christophe Leroy authored
This patch makes use of trap types in head_8xx.S Signed-off-by:
-
Leonardo Bras authored
As of today, if the DDW is big enough to fit (1 << MAX_PHYSMEM_BITS) it's possible to use direct DMA mapping even with pmem region. But, if that happens, the window size (len) is set to (MAX_PHYSMEM_BITS - page_shift) instead of MAX_PHYSMEM_BITS, causing a pagesize times smaller DDW to be created, being insufficient for correct usage. Fix this so the correct window size is used in this case. Fixes: bf6e2d56 ("powerpc/dma: Fallback to dma_ops when persistent memory present") Signed-off-by:
Leonardo Bras <leobras.c@gmail.com> Reviewed-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
- 20 Apr, 2021 9 commits
-
-
Michael Ellerman authored
The changes to add KUAP support with the hash MMU broke booting of KVM PR guests. The symptom is no visible progress of the guest, or possibly just "SLOF" being printed to the qemu console. Host code is still executing, but breaking into xmon might show a stack trace such as: __might_fault+0x84/0xe0 (unreliable) kvm_read_guest+0x1c8/0x2f0 [kvm] kvmppc_ld+0x1b8/0x2d0 [kvm] kvmppc_load_last_inst+0x50/0xa0 [kvm] kvmppc_exit_pr_progint+0x178/0x220 [kvm_pr] kvmppc_handle_exit_pr+0x31c/0xe30 [kvm_pr] after_sprg3_load+0x80/0x90 [kvm_pr] kvmppc_vcpu_run_pr+0x104/0x260 [kvm_pr] kvmppc_vcpu_run+0x34/0x48 [kvm] kvm_arch_vcpu_ioctl_run+0x340/0x450 [kvm] kvm_vcpu_ioctl+0x2ac/0x8c0 [kvm] sys_ioctl+0x320/0x1060 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c Bisect points to commit b2ff33a1 ("powerpc/book3s64/hash/kuap: Enable kuap on hash"), but that's just the commit that enabled KUAP with hash and made the bug visible. The root cause seems to be that KVM PR is creating kernel mappings that don't use the correct key, since we switched to using key 3. We have a helper for adding the right key value, however it's designed to take a pteflags variable, which the KVM code doesn't have. But we can make it work by passing 0 for the pteflags, and tell it explicitly that it should use the kernel key. With that changed guests boot successfully. Fixes: d94b827e ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation") Cc: stable@vger.kernel.org # v5.11+ Signed-off-by:
-
Michael Ellerman authored
RCU complains about us calling printk() from an offline CPU: ============================= WARNING: suspicious RCU usage 5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted ----------------------------- kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 2, debug_locks = 1 no locks held by swapper/0/0. stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1 Call Trace: dump_stack+0xec/0x144 (unreliable) lockdep_rcu_suspicious+0x124/0x144 __lock_acquire+0x1098/0x28b0 lock_acquire+0x128/0x600 _raw_spin_lock_irqsave+0x6c/0xc0 down_trylock+0x2c/0x70 __down_trylock_console_sem+0x60/0x140 vprintk_emit+0x1a8/0x4b0 vprintk_func+0xcc/0x200 printk+0x40/0x54 pseries_cpu_offline_self+0xc0/0x120 arch_cpu_idle_dead+0x54/0x70 do_idle+0x174/0x4a0 cpu_startup_entry+0x38/0x40 rest_init+0x268/0x388 start_kernel+0x748/0x790 start_here_common+0x1c/0x614 Which happens because by the time we get to rtas_stop_self() we are already offline. In addition the message can be spammy, and is not that helpful for users, so remove it. Signed-off-by: -
Michael Ellerman authored
We have some interesting code in our Makefile to define _TASK_CPU, based on awk'ing the value out of asm-offsets.h. It exists to circumvent some circular header dependencies that prevent us from referring to task_struct in the relevant code. See the comment around _TASK_CPU in smp.h for more detail. Maybe one day we can come up with a better solution, but for now we can at least limit that logic to 32-bit, because it's not needed for 64-bit. Signed-off-by:
-
Tyrel Datwyler authored
Currently, neither the vio_bus or vio_driver structures provide support for a shutdown() routine. Add support for shutdown() by allowing drivers to provide a implementation via function pointer in their vio_driver struct and provide a proper implementation in the driver template for the vio_bus that calls a vio drivers shutdown() if defined. In the case that no shutdown() is defined by a vio driver and a kexec is in progress we implement a big hammer that calls remove() to ensure no further DMA for the devices is possible. Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
Athira Rajeev authored
Performance Monitoring Unit (PMU) registers in powerpc provides information on cycles elapsed between different stages in the pipeline. This can be used for application tuning. On ISA v3.1 platform, this information is exposed by sampling registers. Patch adds kernel support to capture two of the cycle counters as part of perf sample using the sample type: PERF_SAMPLE_WEIGHT_STRUCT. The power PMU function 'get_mem_weight' currently uses 64 bit weight field of perf_sample_data to capture memory latency. But following the introduction of PERF_SAMPLE_WEIGHT_TYPE, weight field could contain 64-bit or 32-bit value depending on the architexture support for PERF_SAMPLE_WEIGHT_STRUCT. Patches uses WEIGHT_STRUCT to expose the pipeline stage cycles info. Hence update the ppmu functions to work for 64-bit and 32-bit weight values. If the sample type is PERF_SAMPLE_WEIGHT, use the 64-bit weight field. if the sample type is PERF_SAMPLE_WEIGHT_STRUCT, memory subsystem latency is stored in the low 32bits of perf_sample_weight structure. Also for CPU_FTR_ARCH_31, capture the two cycle counter information in two 16 bit fields of perf_sample_weight structure. Signed-off-by:
-
Haren Myneni authored
The links that are mentioned in this document are no longer valid. So changed the proper links for NXGZIP user manual and test cases. Reported-by:
Bulent Abali <abali@us.ibm.com> Signed-off-by:
Haren Myneni <haren@linux.ibm.com> Signed-off-by:
-
Daniel Henrique Barboza authored
The RTAS set-indicator call, when attempting to UNISOLATE a DRC that is already UNISOLATED or CONFIGURED, returns RTAS_OK and does nothing else for both QEMU and phyp. This gives us an opportunity to use this behavior to signal the hypervisor layer when an error during device removal happens, allowing it to do a proper error handling, while not breaking QEMU/phyp implementations that don't have this support. This patch introduces this idea by unisolating all CPU DRCs that failed to be removed by dlpar_cpu_remove_by_index(), when handling the PSERIES_HP_ELOG_ID_DRC_INDEX event. This is being done for this event only because its the only CPU removal event QEMU uses, and there's no need at this moment to add this mechanism for phyp only code. Signed-off-by:
Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Daniel Henrique Barboza authored
Next patch will execute a set-indicator call in hotplug-cpu.c. Create a dlpar_unisolate_drc() helper to avoid spreading more rtas_set_indicator() calls outside of dlpar.c. Signed-off-by:
-
Ganesh Goudar authored
The error type is ICACHE not DCACHE, for case MCE_ERROR_TYPE_ICACHE. Signed-off-by:
-
- 19 Apr, 2021 1 commit
-
-
Michael Ellerman authored
sfr reports that the allyesconfig build fails with: arch/powerpc/kernel/fadump.c: In function 'crash_fadump': arch/powerpc/kernel/fadump.c:731:28: error: 'INTERRUPT_SYSTEM_RESET' undeclared 731 | if (TRAP(&(fdh->regs)) == INTERRUPT_SYSTEM_RESET) { Add an include of interrupt.h to fix it. Fixes: 7153d4bf ("powerpc/traps: Enhance readability for trap types") Signed-off-by:Stephen Rothwell <sfr@canb.auug.org.au> [mpe: Reformat change log] Signed-off-by:
-
