bio_put_percpu_cache() puts all non-iopoll bios into the irq-safe list,
which entails disabling irqs. The overhead of that is not that bad when
interrupts are already off but getting worse otherwise. We can optimise
it when we're in the task context by using ->free_list directly just as
the IOPOLL path does.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4774e1a0f905f96c63174b0f3e4f79f0d9b63246.1707314970.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

All log messages in dasd.c use the printk variants of pr_*(). They all
add the name of the affected device manually to the log message.
This can be simplified by using the dev_*() variants of printk, which
include the device information and make a separate call to dev_name()
unnecessary.

The KMSG_COMPONENT and the pr_fmt() definition can be dropped. Note that
this removes the "dasd: " prefix from the one pr_info() call in
dasd_init(). However, the log message already provides all relevant
information.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-10-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

PRINTK_HEADER was mainly used to prefix log messages with the module
name. Most components don't use this definition anymore. Either because
there are no log messages being generated anymore, or pr_*() were
replaced by dev_*(), which contains device and component information
already.

PRINTK_HEADER is also dropped in the function
dasd_3990_erp_handle_match_erp() in dasd_3990_erp.c from a panic() call
as panic() already provides all relevant information.

KMSG_COMPONENT was mainly used to identify a component in a long gone
kernel message catalog feature.

Remove both definition since they're either not used or alternatives
make the code slightly shorter and more readable.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-9-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Printing pointer in error messages doesn't add any value since the
addresses are hashed. Remove the %p format specifier and adapt the error
messages slightly.

Replace %p with %px in ERP to get the actual addresses since ERP is used
for debugging purposes only anyway.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-8-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

To reduce the information required for the string generation in the
sense dump functions, use the more concise dev_err() variant over
printk(KERN_ERR, ...) to improve code readability.

The dev_err() function provides the component and device name for free
and the separate dev_name() calls as well as the PRINTK_HEADER can be
dropped.

Dropping PRINTK_HEADER removes the "dasd(eckd):" for all lines. Only the
first line of a dev_err() call is prefixed with the component and device
(e.g. "dasd-eckd 0.0.95d0:").

The format specifier for printed pointers is also changed to unhashed
(%px) as this can help with debugging and servicing.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-7-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The macros DEV_MESSAGE, MESSAGE, DEV_MESSAGE_LOG, and MESSAGE_LOG, are
not used and there is no history anymore of any usage. Remove them.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-6-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

All error messages for a failling dasd_smalloc_request() call are logged
via DBF, except one. There is no value in logging this particular
allocation failure via dev_err(). Move the message to DBF, too, to be
in line with the rest.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-5-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

In quite a few cases an errorstring is generated using snprintf() before
it's passed to dev_err(). This indirection is unnecessary and all
information can simply be passed directly to dev_err() instead.
The errrorstring and ERRORLENGTH definitions are removed entirely.

While at it, rephrase the error messages to provide more context where
possible. Also, fix a few incorrectly used format specifier (e.g. %x02
-> %02x) in those messages.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-4-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

sysfs_emit() should be used in show() functions. There are still a
couple of functions that use sprintf().
Replace outstanding occurrences of sprintf() in all show() functions
with sysfs_emit().
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-3-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

There are two variants of the device uid string. One containing the
virtual device unit information table (vduit) identifying the device as
a virtual device located on a real device in a z/VM environment. The
other variant does not contain those additional information.

Simplify the string generation with a shorter check of an existing vduit
embedded in the snprintf() calls.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-2-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Now that the driver core can properly handle constant struct bus_type,
move the rbd_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-block-v1-1-fc77afd8d7cc@marliere.netSigned-off-by: Jens Axboe <axboe@kernel.dk>

After calling throtl_peek_queued(), the data direction can be determined so
there is no need to call bio_data_dir() to check the direction again.
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240123081248.3752878-1-yizhou.tang@shopee.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Mark the task as having a cached timestamp when set assign it, so we
can efficiently check if it needs updating post being scheduled back in.
This covers both the actual schedule out case, which would've flushed
the plug, and the preemption case which doesn't touch the plugged
requests (for many reasons, one of them being then we'd need to have
preemption disabled around plug state manipulation).
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Querying the current time is the most costly thing we do in the block
layer per IO, and depending on kernel config settings, we may do it
many times per IO.

None of the callers actually need nsec granularity. Take advantage of
that by caching the current time in the plug, with the assumption here
being that any time checking will be temporally close enough that the
slight loss of precision doesn't matter.

If the block plug gets flushed, eg on preempt or schedule out, then
we invalidate the cached clock.

On a basic peak IOPS test case with iostats enabled, this changes
the performance from:

IOPS=108.41M, BW=52.93GiB/s, IOS/call=31/31
IOPS=108.43M, BW=52.94GiB/s, IOS/call=32/32
IOPS=108.29M, BW=52.88GiB/s, IOS/call=31/32
IOPS=108.35M, BW=52.91GiB/s, IOS/call=32/32
IOPS=108.42M, BW=52.94GiB/s, IOS/call=31/31
IOPS=108.40M, BW=52.93GiB/s, IOS/call=32/32
IOPS=108.31M, BW=52.89GiB/s, IOS/call=32/31

to

IOPS=118.79M, BW=58.00GiB/s, IOS/call=31/32
IOPS=118.62M, BW=57.92GiB/s, IOS/call=31/31
IOPS=118.80M, BW=58.01GiB/s, IOS/call=32/31
IOPS=118.78M, BW=58.00GiB/s, IOS/call=32/32
IOPS=118.69M, BW=57.95GiB/s, IOS/call=32/31
IOPS=118.62M, BW=57.92GiB/s, IOS/call=32/31
IOPS=118.63M, BW=57.92GiB/s, IOS/call=31/32

which is more than a 9% improvement in performance. Looking at perf diff,
we can see a huge reduction in time overhead:

    10.55%     -9.88%  [kernel.vmlinux]  [k] read_tsc
     1.31%     -1.22%  [kernel.vmlinux]  [k] ktime_get

Note that since this relies on blk_plug for the caching, it's only
applicable to the issue side. But this is where most of the time calls
happen anyway. On the completion side, cached time stamping is done with
struct io_comp patch, as long as the driver supports it.

It's also worth noting that the above testing doesn't enable any of the
higher cost CPU items on the block layer side, like wbt, cgroups,
iocost, etc, which all would add additional time querying and hence
overhead. IOW, results would likely look even better in comparison with
those enabled, as distros would do.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Convert any user of ktime_get_ns() to use blk_time_get_ns(), and
ktime_get() to blk_time_get(), so we have a unified API for querying the
current time in nanoseconds or as ktime.

No functional changes intended, this patch just wraps ktime_get_ns()
and ktime_get() with a block helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In preparation for moving time keeping into blk.h, move the cgroup
related code for timestamps in here too. This will help avoid a circular
dependency, and also moves it into a more appropriate header as this one
is private to the block layer code.

Leave struct bio_issue in blk_types.h as it's a proper time definition.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Share the main merge / split / integrity preparation code between the
cached request vs newly allocated request cases, and add comments
explaining the cached request handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240124092658.2258309-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Add a new helper to check if there is suitable cached request in
blk_mq_submit_bio.  This removes open coded logic in blk_mq_submit_bio
and moves some checks that so far are in blk_mq_use_cached_rq to
be performed earlier.  This avoids the case where we first do check
with the cached request but then later end up allocating a new one
anyway and need to grab a queue reference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240124092658.2258309-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

blk_mq_attempt_bio_merge has nothing to do with allocating a new
request, it avoids allocating a new request.  Move the call out of
blk_mq_get_new_requests and into the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240124092658.2258309-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
  and extent handling code"

* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
  ext4: make ext4_map_blocks() distinguish delalloc only extent
  ext4: add a hole extent entry in cache after punch
  ext4: correct the hole length returned by ext4_map_blocks()
  ext4: convert to exclusive lock while inserting delalloc extents
  ext4: refactor ext4_da_map_blocks()
  ext4: remove 'needed' in trace_ext4_discard_preallocations
  ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
  ext4: remove unused return value of ext4_mb_release_group_pa
  ext4: remove unused return value of ext4_mb_release_inode_pa
  ext4: remove unused return value of ext4_mb_release
  ext4: remove unused ext4_allocation_context::ac_groups_considered
  ext4: remove unneeded return value of ext4_mb_release_context
  ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
  ext4: remove unused return value of __mb_check_buddy
  ext4: mark the group block bitmap as corrupted before reporting an error
  ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
  ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
  ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
  ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
  ...

Pull smb client fixes from Steve French:
 "Five smb3 client fixes, mostly multichannel related:

   - four multichannel fixes including fix for channel allocation when
     multiple inactive channels, fix for unneeded race in channel
     deallocation, correct redundant channel scaling, and redundant
     multichannel disabling scenarios

   - add warning if max compound requests reached"

* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: increase number of PDUs allowed in a compound request
  cifs: failure to add channel on iface should bump up weight
  cifs: do not search for channel if server is terminating
  cifs: avoid redundant calls to disable multichannel
  cifs: make sure that channel scaling is done only once

Pull xfs fixes from Chandan Babu:

 - Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
   attribute fork

 - Remove conditional compilation of realtime geometry validator
   functions to prevent confusing error messages from being printed on
   the console during the mount operation

* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove conditional building of rt geometry validator functions
  xfs: reset XFS_ATTR_INCOMPLETE filter on node removal

Pull char/misc driver fixes from Greg KH:
 "Here are three tiny driver fixes for 6.8-rc3.  They include:

   - Android binder long-term bug with epoll finally being fixed

   - fastrpc driver shutdown bugfix

   - open-dice lockdep fix

  All of these have been in linux-next this week with no reported
  issues"

* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: signal epoll threads of self-work
  misc: open-dice: Fix spurious lockdep warning
  misc: fastrpc: Mark all sessions as invalid in cb_remove

Pull tty and serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.8-rc3 that
  resolve a number of reported issues. Included in here are:

   - rs485 flag definition fix that affected the user/kernel abi in -rc1

   - max310x driver fixes

   - 8250_pci1xxxx driver off-by-one fix

   - uart_tiocmget locking race fix

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: max310x: prevent infinite while() loop in port startup
  serial: max310x: fail probe if clock crystal is unstable
  serial: max310x: improve crystal stable clock detection
  serial: max310x: set default value when reading clock ready bit
  serial: core: Fix atomicity violation in uart_tiocmget
  serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
  tty: serial: Fix bit order in RS485 flag definitions

Pull USB driver fixes from Greg KH:
 "Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
  here are:

   - new usb-serial driver ids

   - new dwc3 driver id added

   - typec driver change revert

   - ncm gadget driver endian bugfix

   - xhci bugfixes for a number of reported issues

   - usb hub bugfix for alternate settings

   - ulpi driver debugfs memory leak fix

   - chipidea driver bugfix

   - usb gadget driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  USB: serial: option: add Fibocom FM101-GL variant
  USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
  USB: serial: cp210x: add ID for IMST iM871A-USB
  usb: typec: tcpm: fix the PD disabled case
  usb: ucsi_acpi: Quirk to ack a connector change ack cmd
  usb: ucsi_acpi: Fix command completion handling
  usb: ucsi: Add missing ppm_lock
  usb: ulpi: Fix debugfs directory leak
  Revert "usb: typec: tcpm: fix cc role at port reset"
  usb: gadget: pch_udc: fix an Excess kernel-doc warning
  usb: f_mass_storage: forbid async queue when shutdown happen
  USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
  usb: chipidea: core: handle power lost in workqueue
  usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
  usb: dwc3: pci: add support for the Intel Arrow Lake-H
  usb: core: Prevent null pointer dereference in update_port_device_state
  xhci: handle isoc Babble and Buffer Overrun events properly
  xhci: process isoc TD properly when there was a transaction error mid TD.
  xhci: fix off by one check when adding a secondary interrupter.
  xhci: fix possible null pointer dereference at secondary interrupter removal
  ...

Pull i2c fixlet from Wolfram Sang:
 "MAINTAINERS update to point people to the new tree for i2c host driver
  changes"

* tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: Update i2c host drivers repository

Pull dmaengine fixes from Vinod Koul:
 "Core:

   - fix return value of is_slave_direction() for D2D dma

  Driver fixes for:

   - Documentaion fixes to resolve warnings for at_hdmac driver

   - bunch of fsl driver fixes for memory leaks, and useless kfree

   - TI edma and k3 fixes for packet error and null pointer checks"

* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: at_hdmac: add missing kernel-doc style description
  dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
  dmaengine: fsl-qdma: Remove a useless devm_kfree()
  dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
  dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
  dmaengine: ti: k3-udma: Report short packet errors
  dmaengine: ti: edma: Add some null pointer checks to the edma_probe
  dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
  dmaengine: at_hdmac: fix some kernel-doc warnings

Pull phy driver fixes from Vinod Koul:

 - TI null pointer dereference

 - missing erdes mux entry in lan966x driver

 - Return of error code in renesas driver

 - Serdes init sequence and register offsets for IPQ drivers

* tag 'phy-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP
  phy: lan966x: Add missing serdes mux entry
  phy: renesas: rcar-gen3-usb2: Fix returning wrong error code
  phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018
  phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018

Merge tag 'i2c-host-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

Just a maintenance patch that updates the repository where the
i2c host and muxes related patches will be collected.

Merge tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:
 "Vendor events:

   - Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
     ("cpu_atom", "cpu_core") needs to be used as a prefix to be
     considered on a metric formula, detected via one of the 'perf test'
     entries.

  'perf test' fixes:

   - Fix the creation of event selector lists on 'perf test' entries, by
     initializing the sample ID flag, which is done by 'perf record', so
     this fix affects only the tests, the common case isn't affected

   - Make 'perf list' respect debug settings (-v) to fix its 'perf test'
     entry

   - Fix 'perf script' test when python support isn't enabled

   - Special case 'perf script' tests on s390, where only DWARF call
     graphs are supported and only on software events

   - Make 'perf daemon' signal test less racy

  Compiler warnings/errors:

   - Remove needless malloc(0) call in 'perf top' that triggers
     -Walloc-size

   - Fix calloc() argument order to address error introduced in gcc-14

  Build:

   - Make minimal shellcheck version to v0.6.0, avoiding the build to
     fail with older versions

  Sync kernel header copies:

   - stat.h to pick STATX_MNT_ID_UNIQUE

   - msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING

   - drm.h to pick DRM_IOCTL_MODE_CLOSEFB

   - unistd.h to pick {list,stat}mount,
     lsm_{[gs]et_self_attr,list_modules} syscall numbers

   - x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes

   - x86's mem{cpy,set}_64.S used in 'perf bench'

   - Also, without tooling effects: asm-generic/unaligned.h, mount.h,
     fcntl.h, kvm headers"

* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
  perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
  tools include UAPI: Sync linux/mount.h copy with the kernel sources
  perf evlist: Fix evlist__new_default() for > 1 core PMU
  tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
  tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
  tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
  perf vendor events intel: Alderlake/sapphirerapids metric fixes
  tools headers UAPI: Sync kvm headers with the kernel sources
  perf tools: Fix calloc() arguments to address error introduced in gcc-14
  perf top: Remove needless malloc(0) call that triggers -Walloc-size
  perf build: Make minimal shellcheck version to v0.6.0
  tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
  perf test shell daemon: Make signal test less racy
  perf test shell script: Fix test for python being disabled
  perf test: Workaround debug output in list test
  perf list: Add output file option
  perf list: Switch error message to pr_err() to respect debug settings (-v)
  perf test: Fix 'perf script' tests on s390
  tools headers UAPI: Sync linux/fcntl.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
  ...

Pull tracing and eventfs fixes from Steven Rostedt:

 - Fix the return code for ring_buffer_poll_wait()

   It was returing a -EINVAL instead of EPOLLERR.

 - Zero out the tracefs_inode so that all fields are initialized.

   The ti->private could have had stale data, but instead of just
   initializing it to NULL, clear out the entire structure when it is
   allocated.

 - Fix a crash in timerlat

   The hrtimer was initialized at read and not open, but is canceled at
   close. If the file was opened and never read the close will pass a
   NULL pointer to hrtime_cancel().

 - Rewrite of eventfs.

   Linus wrote a patch series to remove the dentry references in the
   eventfs_inode and to use ref counting and more of proper VFS
   interfaces to make it work.

 - Add warning to put_ei() if ei is not set to free. That means
   something is about to free it when it shouldn't.

 - Restructure the eventfs_inode to make it more compact, and remove the
   unused llist field.

 - Remove the fsnotify*() funtions for when the inodes were being
   created in the lookup code. It doesn't make sense to notify about
   creation just because something is being looked up.

 - The inode hard link count was not accurate.

   It was being updated when a file was looked up. The inodes of
   directories were updating their parent inode hard link count every
   time the inode was created. That means if memory reclaim cleaned a
   stale directory inode and the inode was lookup up again, it would
   increment the parent inode again as well. Al Viro said to just have
   all eventfs directories have a hard link count of 1. That tells user
   space not to trust it.

* tag 'trace-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Keep all directory links at 1
  eventfs: Remove fsnotify*() functions from lookup()
  eventfs: Restructure eventfs_inode structure to be more condensed
  eventfs: Warn if an eventfs_inode is freed without is_freed being set
  tracing/timerlat: Move hrtimer_init to timerlat_fd open()
  eventfs: Get rid of dentry pointers without refcounts
  eventfs: Clean up dentry ops and add revalidate function
  eventfs: Remove unused d_parent pointer field
  tracefs: dentry lookup crapectomy
  tracefs: Avoid using the ei->dentry pointer unnecessarily
  eventfs: Initialize the tracefs inode properly
  tracefs: Zero out the tracefs_inode when allocating it
  ring-buffer: Clean ring_buffer_poll_wait() error return

Pull gfs2 revert from Andreas Gruenbacher:
 "It turns out that the commit to use GL_NOBLOCK flag for non-blocking
  lookups has several issues, and not all of them have a simple fix"

* tag 'gfs2-v6.8-rc2-revert' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  Revert "gfs2: Use GL_NOBLOCK flag for non-blocking lookups"

Pull pci fixes from Bjorn Helgaas:

 - Fix a potential deadlock that was reintroduced by an ASPM revert
   merged for v6.8 (Johan Hovold)

 - Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo
   Pieralisi)

* tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer
  PCI/ASPM: Fix deadlock when enabling ASPM

Pul drm fixes from Dave Airlie:
 "Regular weekly fixes, mostly amdgpu and xe. One nouveau fix is a
  better fix for the deadlock and also helps with a sync race we were
  seeing.

  dma-buf:
   - heaps CMA page accounting fix

  virtio-gpu:
   - fix segment size

  xe:
   - A crash fix
   - A fix for an assert due to missing mem_acces ref
   - Only allow a single user-fence per exec / bind.
   - Some sparse warning fixes
   - Two fixes for compilation failures on various odd combinations of
     gcc / arch pointed out on LKML.
   - Fix a fragile partial allocation pointed out on LKML.
   - A sysfs ABI documentation warning fix

  amdgpu:
   - Fix reboot issue seen on some 7000 series dGPUs
   - Fix client init order for KFD
   - Misc display fixes
   - USB-C fix
   - DCN 3.5 fixes
   - Fix issues with GPU scheduler and GPU reset
   - GPU firmware loading fix
   - Misc fixes
   - GC 11.5 fix
   - VCN 4.0.5 fix
   - IH overflow fix

  amdkfd:
   - SVM fixes
   - Trap handler fix
   - Fix device permission lookup
   - Properly reserve BO before validating it

  nouveau:
   - fence/irq lock deadlock fix (second attempt)
   - gsp command size fix

* tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm: (35 commits)
  nouveau: offload fence uevents work to workqueue
  nouveau/gsp: use correct size for registry rpc.
  drm/amdgpu/pm: Use inline function for IP version check
  drm/hwmon: Fix abi doc warnings
  drm/xe: Make all GuC ABI shift values unsigned
  drm/xe/vm: Subclass userptr vmas
  drm/xe: Use LRC prefix rather than CTX prefix in lrc desc defines
  drm/xe: Don't use __user error pointers
  drm/xe: Annotate mcr_[un]lock()
  drm/xe: Only allow 1 ufence per exec / bind IOCTL
  drm/xe: Grab mem_access when disabling C6 on skip_guc_pc platforms
  drm/xe: Fix crash in trace_dma_fence_init()
  drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
  drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend
  drm/amdgpu: drm/amdgpu: remove golden setting for gfx 11.5.0
  drm/amdkfd: reserve the BO before validating it
  drm/amdgpu: Fix missing error code in 'gmc_v6/7/8/9_0_hw_init()'
  drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
  drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'
  drm/amd: Don't init MEC2 firmware when it fails to load
  ...

Pull input fixes from Dmitry Torokhov:

 - a fix for the fix to deal with newer laptops which get confused by
   the "GET ID" command when probing for PS/2 keyboards

 - a couple of tweaks to i8042 to handle Clevo NS70PU and Lifebook U728
   laptops

 - a change to bcm5974 to validate that the device has appropriate
   endpoints

 - an addition of new product ID to xpad driver to recognize Lenovo
   Legion Go controllers

 - a quirk to Goodix controller to deal with extra GPIO described in
   ACPI tables on some devices.

* tag 'input-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
  Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
  Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
  Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
  Input: bcm5974 - check endpoint type before starting traffic
  Input: xpad - add Lenovo Legion Go controllers
  Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0

Pull sound fixes from Takashi Iwai:
 "A collection of fixes, mostly device-specific ones:

   - Minor PCM core fix for name strings

   - ASoC Qualcomm fixes, including DAI support extensions

   - ASoC AMD platform updates

   - ASoC Allwinner platform updates

   - Various ASoC codec fixes for WSA, WCD, ES8326 drivers

   - Various HD-audio and USB-audio fixes and quirks

   - A series of fixes for Cirrus CS35L56 codecs"

* tag 'sound-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
  ALSA: usb-audio: Ignore clock selector errors for single connection
  ALSA: hda/realtek: Enable headset mic on Vaio VJFE-ADL
  ALSA: hda: cs35l56: Remove unused test stub function
  ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware
  ALSA: hda: cs35l56: Fix filename string field layout
  ALSA: hda: cs35l56: Fix order of searching for firmware files
  ASoC: cs35l56: Allow more time for firmware to boot
  ASoC: cs35l56: Load tunings for the correct speaker models
  ASoC: cs35l56: Firmware file must match the version of preloaded firmware
  ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision
  ASoC: cs35l56: Fix for initializing ASP1 mixer registers
  ALSA: hda: cs35l56: Initialize all ASP1 registers
  ASoC: cs35l56: Fix default SDW TX mixer registers
  ASoC: cs35l56: Fix to ensure ASP1 registers match cache
  ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed()
  ASoC: cs35l56: Don't add the same register patch multiple times
  ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp
  ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component
  ASoC: wm_adsp: Don't overwrite fwf_name with the default
  ASoC: wm_adsp: Fix firmware file search order
  ...

Merge tag 'hwmon-for-v6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - pmbus/mp2975: Fix driver initialization

 - gigabyte_waterforce: Add missing unlock in error handling path

* tag 'hwmon-for-v6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pmbus/mp2975) Correct comment inside 'mp2975_read_byte_data'
  hwmon: (pmbus/mp2975) Fix driver initialization for MP2975 device
  hwmon: gigabyte_waterforce: Fix locking bug in waterforce_get_status()

Pull power supply fix from Sebastian Reichel:

 - qcom_battmgr: revert broken fix

* tag 'for-v6.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  Revert "power: supply: qcom_battmgr: Register the power supplies after PDR is up"

Pul iommu fixes from Joerg Roedel:

 - Make iommu_ops->default_domain work without CONFIG_IOMMU_DMA to fix
   initialization of FSL-PAMU devices

 - Fix for Tegra fbdev initialization failure

 - Fix for a VFIO device unbinding failure on PowerPC

* tag 'iommu-fixes-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  powerpc: iommu: Bring back table group release_ownership() call
  drm/tegra: Do not assume that a NULL domain means no DMA IOMMU
  iommu: Allow ops->default_domain to work when !CONFIG_IOMMU_DMA