- 19 Apr, 2021 1 commit
-
-
David E. Box authored
The DMI callbacks, used for quirks, currently access the PMC by getting the address a global pmc_dev struct. Instead, have the callbacks set a global quirk specific variable. In probe, after calling dmi_check_system(), pass pmc_dev to a function that will handle each quirk if its variable condition is met. This allows removing the global pmc_dev later. Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20210417031252.3020837-2-david.e.box@linux.intel.comSigned-off-by:
-
- 15 Apr, 2021 3 commits
-
-
Guangqing Zhu authored
Coccinelle noticed: drivers/platform/x86/intel_chtdc_ti_pwrbtn.c:59:7-32: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Signed-off-by:
Guangqing Zhu <zhuguangqing83@gmail.com> Link: https://lore.kernel.org/r/20210415091435.10486-1-zhuguangqing83@gmail.comTested-by:
-
Julian Labus authored
Add the X570 AORUS ELITE to gigabyte_wmi_known_working_platforms Signed-off-by:
Julian Labus <julian@labus-online.de> Acked-By:
Thomas Weißschuh <thomas@weissschuh.net> Link: https://lore.kernel.org/r/20210415074526.1782-1-julian@labus-online.deSigned-off-by:
-
Hans de Goede authored
On EC version 3, the first 2 temperature sensors are always CPU and GPU add labels for these. This changes e.g. the "sensors" command output on a X1C8 from: thinkpad-isa-0000 Adapter: ISA adapter fan1: 2694 RPM temp1: +42.0°C temp2: N/A temp3: +33.0°C temp4: +0.0°C temp5: +35.0°C temp6: +42.0°C temp7: +42.0°C temp8: N/A into: thinkpad-isa-0000 Adapter: ISA adapter fan1: 2694 RPM CPU: +42.0°C GPU: N/A temp3: +33.0°C temp4: +0.0°C temp5: +35.0°C temp6: +42.0°C temp7: +42.0°C temp8: N/A Signed-off-by:
-
- 14 Apr, 2021 1 commit
-
-
Steffen Dirkwinkel authored
platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table pmc_plt_clk* clocks are used for ethernet controllers, so need to stay turned on. This adds the affected board family to critclk_systems DMI table, so the clocks are marked as CLK_CRITICAL and not turned off. This replaces the previously listed boards with a match for the whole device family CBxx63. CBxx63 matches only baytrail devices. There are new affected boards that would otherwise need to be listed. There are unaffected boards in the family, but having the clocks turned on is not an issue. Fixes: 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Link: https://lore.kernel.org/r/20210412133006.397679-1-linux-kernel-dev@beckhoff.comSigned-off-by:
-
- 13 Apr, 2021 3 commits
-
-
Thomas Weißschuh authored
Tested with * X570 I Aorus Pro Wifi (rev 1.0) * B550M DS3H * B550 Gaming X V2 (rev.1.x) * Z390 I AORUS PRO WIFI (rev. 1.0) Those mainboards contain an ITE chips for management and monitoring. They could also be handled by drivers/hwmon/i87.c. But the SuperIO range used by i87 is already claimed and used by the firmware. The following warning is printed at boot: kernel: ACPI Warning: SystemIO range 0x0000000000000A45-0x0000000000000A46 conflicts with OpRegion 0x0000000000000A45-0x0000000000000A46 (\GSA1.SIO1) (20200528/utaddress-204) kernel: ACPI: This conflict may cause random problems and system instability kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver This driver implements such an ACPI driver. Unfortunately not all sensor registers are handled by the firmware and even less are exposed via WMI. Signed-off-by:
Thomas Weißschuh <linux@weissschuh.net> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210412123513.628901-1-linux@weissschuh.netReviewed-by:
-
Tamar Mashiah authored
During PCH (platform/board) manufacturing process a global platform reset has to be induced in order for the configuration changes take the effect upon following platform reset. This is an internal platform state and is not intended to be used in the regular platform resets. The setting is exposed via ETR3 (Extended Test Mode Register 3). After the manufacturing process is completed the register cannot be written anymore and is hardware locked. This setting was commonly done by accessing PMC registers via /dev/mem but due to security concerns /dev/mem access is much more restricted, hence the reason for exposing this setting via the dedicated sysfs interface. To prevent post manufacturing abuse the register is protected by hardware locking and the file is set to read-only mode via is_visible handler. The register in MMIO space is defined for Cannon Lake and newer PCHs. Cc: Hans de Goede <hdegoede@redhat.com> Cc: David E Box <david.e.box@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Tamar Mashiah <tamar.mashiah@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210411141532.3004893-1-tomas.winkler@intel.comReviewed-by:
-
Mark Pearson authored
On recent Thinkpad platforms it was reported that temp sensor 11 was always incorrectly displaying 66C. It turns out the reason for this is that this location in EC RAM is not a temperature sensor but is the power supply ID (offset 0xC2). Based on feedback from the Lenovo firmware team the EC RAM version can be determined and for the current version (3) only the 0x78 to 0x7F range is used for temp sensors. I don't have any details for earlier versions so I have left the implementation unaltered there. Note - in this block only 0x78 and 0x79 are officially designated (CPU & GPU sensors). The use of the other locations in the block will vary from platform to platform; but the existing logic to detect a sensor presence holds. Signed-off-by:
Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20210407212015.298222-1-markpearson@lenovo.comReviewed-by:
-
- 08 Apr, 2021 3 commits
-
-
Tian Tao authored
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable because of requesting. this patch is made base on "add IRQF_NO_AUTOEN for request_irq" which is being merged: https://lore.kernel.org/patchwork/patch/1388765/Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/1617778852-26492-1-git-send-email-tiantao6@hisilicon.comSigned-off-by:
-
Tian Tao authored
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable because of requesting. this patch is made base on "add IRQF_NO_AUTOEN for request_irq" which is being merged: https://lore.kernel.org/patchwork/patch/1388765/Signed-off-by:
Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/1617785983-28878-1-git-send-email-tiantao6@hisilicon.comSigned-off-by:
-
Hans de Goede authored
Tag for the input subsystem to pick up
-
- 07 Apr, 2021 17 commits
-
-
Mark Pearson authored
The BIOS team have added a new API that allows us to retrieve the current performance profile without having to disable/enable CQL mode. Adding the changes to use this API. Tested on P15 and X1C8 Signed-off-by:
-
Maximilian Luz authored
Sometimes, the "base connected" event that we rely on to (re-)attach the device connected to the base is sent a bit too early. When this happens, some devices may not be completely ready yet. Specifically, the battery has been observed to report zero-values for things like full charge capacity, which, however, is only loaded once when the driver for that device probes. This can thus result in battery readings being unavailable. As we cannot easily and reliably discern between devices that are not ready yet and devices that are not connected (i.e. will never be ready), delay adding these devices. This should give them enough time to set up. The delay is set to 2.5 seconds, which should give us a good safety margin based on testing and still be fairly responsive for users. To achieve that delay switch to updating via a delayed work struct, which means that we can also get rid of some locking. Signed-off-by:
-
Mario Limonciello authored
So that I can always be reached in the future if necessary, add a personal email address. Signed-off-by:
Mario Limonciello <mario.limonciello@dell.com> Link: https://lore.kernel.org/r/20210401162206.26901-4-mario.limonciello@dell.comSigned-off-by:
-
Mario Limonciello authored
This driver is maintained by Dell, but it was missing in MAINTAINERS. Signed-off-by:
-
Mario Limonciello authored
A team of engineers will be helping to service these drivers in the future rather than just one person. Signed-off-by:
-
Srinivas Pandruvada authored
In some cases when firmware is busy or updating, some mailbox commands still timeout on some newer CPUs. To fix this issue, change how we process timeout. With this change, replaced timeout from using simple count with real timeout in micro-seconds using ktime. When the command response takes more than average processing time, yield to other tasks. The worst case timeout is extended upto 1 milli-second. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20210330220840.3113959-1-srinivas.pandruvada@linux.intel.comSigned-off-by:
-
Srinivas Pandruvada authored
This release adds following changes: - Support increased number of CPUs - Return error when mailbox commmand fails to enable core-power - Option to online all CPUs - Removes build date and time print Signed-off-by:
-
Antonio Terceiro authored
These macros introduce nondeterminism in builds, and break reproducible builds. Signed-off-by:
Antonio Terceiro <antonio.terceiro@linaro.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Srinivas Pandruvada authored
It is possible that users manually offlined CPUs via sysfs interface and then started this utility. In this case we will not be able to get package and die id of the those CPUs. So add an option to force online if required for some commands. Signed-off-by:
-
Srinivas Pandruvada authored
Some older kernels don't support reading core-power status. In that case mailbox command fails. So, display core-power status as "unknown" instead of supported. Signed-off-by:
-
Srinivas Pandruvada authored
The current string size to print cpulist can accommodate upto 80 logical CPUs per package. But this limit is not enough. So increase the string size. Also prevent buffer overflow, if the string size reaches limit. Signed-off-by:
-
Hans de Goede authored
Make init_bios_attributes() ACPI object parsing more robust: 1. Always check that the type of the return ACPI object is package, rather then only checking this for instance_id == 0 2. Check that the package has the minimum amount of elements which will be consumed by the populate_foo_data() for the attr_type Note/TODO: The populate_foo_data() functions should also be made more robust. The should check the type of each of the elements matches the type which they expect and in case of populate_enum_data() obj->package.count should be passed to it as an argument and it should re-check this itself since it consume a variable number of elements. Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by:
-
Colin Ian King authored
The variable result is being assigned a value that is never read and it is being updated later with a new value. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210326192022.623001-1-colin.king@canonical.comSigned-off-by:
-
Dan Carpenter authored
The "&client->ddev->lock" and "&ddev->lock" are the same thing. Let's use "&ddev->lock" consistently. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Hans de Goede authored
Now that we have 2 separate input_dev-s for the buttons and the switches, this is no longer used, remove it. Signed-off-by:
-
Luca Stefani authored
* On recent ZenBooks the fn-lock is disabled by default on boot while running Windows. * Add a module param ( fnlock_default ) that allows changing the default at probe time Signed-off-by:
Luca Stefani <luca.stefani.ge1@gmail.com> Link: https://lore.kernel.org/r/20210323210126.145286-1-luca.stefani.ge1@gmail.comReviewed-by:
-
Andrea.Ho authored
Advantech sw_button is a ACPI event trigger button. With this driver, we can report KEY_PROG1 on the Advantech Tabletop Network Appliances products and it has been tested in FWA1112VC. Add the software define button support to report EV_REP key_event (KEY_PROG1) by pressing button that could be get on user interface and trigger the customized actions. Signed-off-by:
Andrea.Ho <Andrea.Ho@advantech.com.tw> Link: https://lore.kernel.org/r/20210319034427.23222-1-andrea.cs97g@nctu.edu.twReviewed-by:
-
- 06 Apr, 2021 1 commit
-
-
Hans de Goede authored
Some devices send (duplicate) tablet-mode events when moved around even though the mode has not changed; and they do this even when suspended. Change the tablet-mode event handling when priv->wakeup_mode is set to update the switch state in case it changed and then return immediately (without calling pm_wakeup_hard_event()) to avoid spurious wakeups. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212537 Fixes: 537b0dd4 ("platform/x86: intel-hid: Add support for SW_TABLET_MODE") Signed-off-by:
Elia Devito <eliadevito@gmail.com> Link: https://lore.kernel.org/r/20210404143831.25173-1-hdegoede@redhat.com
-
- 23 Mar, 2021 9 commits
-
-
David E. Box authored
Due to a HW limitation, the Latency Tolerance Reporting (LTR) value programmed in the Tiger Lake GBE controller is not large enough to allow the platform to enter Package C10, which in turn prevents the platform from achieving its low power target during suspend-to-idle. Ignore the GBE LTR value on Tiger Lake. LTR ignore functionality is currently performed solely by a debugfs write call. Split out the LTR code into its own function that can be called by both the debugfs writer and by this work around. Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Cc: intel-wired-lan@lists.osuosl.org Reviewed-by:
-
David E. Box authored
The intel_pmc_core driver is mostly used as a debugging driver for Intel platforms that support SLPS0 (S0ix). But the driver may also be used to communicate actions to the PMC in order to ensure transition to SLPS0 on some systems and architectures. As such the driver should be built on all platforms it supports. Indicate this in the Kconfig. Also update the list of supported features. Signed-off-by:
-
Esteve Varela Colominas authored
Signed-off-by:
Esteve Varela Colominas <esteve.varela@gmail.com> Link: https://lore.kernel.org/r/20210321183512.14551-1-esteve.varela@gmail.comSigned-off-by:
-
kernel test robot authored
drivers/platform/surface/surface_dtx.c:651:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 1d609992 ("platform/surface: Add DTX driver") CC: Maximilian Luz <luzmaximilian@gmail.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
kernel test robot authored
Use kobj_to_dev() instead of container_of() Generated by: scripts/coccinelle/api/kobj_to_dev.cocci CC: Denis Efremov <efremov@linux.com> Reported-by:
Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2103171258010.2981@hadrienSigned-off-by:
-
Bhaskar Chowdhury authored
s/progamming/programming/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210317095650.2036419-1-unixbhaskar@gmail.comSigned-off-by:
-
Bhaskar Chowdhury authored
s/derefence/dereference/ Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@cascardo.eti.br> Acked-by:
-
David E. Box authored
Fixes off-by-one bugs in the macro assignments for the crashlog control bits. Was initially tested on emulation but bug revealed after testing on silicon. Fixes: 5ef9998c ("platform/x86: Intel PMT Crashlog capability driver") Signed-off-by:
-
David E. Box authored
Initialize the struct resource in intel_pmt_dev_register to zero to avoid a fault should the char *name field be non-zero. Signed-off-by:
-
- 21 Mar, 2021 2 commits
-
-
Nitin Joshi authored
On some newer Thinkpads we need to set SAR value based on antenna type. This patch provides a sysfs interface that userspace can use to get antenna type and set corresponding SAR value, as is required for FCC certification. Reviewed-by:
Nitin Joshi <njoshi1@lenovo.com> Link: https://lore.kernel.org/r/20210317024636.356175-1-njoshi1@lenovo.comSigned-off-by:
-
Hans de Goede authored
Stop reporting SW_DOCK events because this breaks suspend-on-lid-close. SW_DOCK should only be reported for docking stations, but all the DSDTs in my DSDT collection which use the intel-vbtn code, always seem to use this for 2-in-1s / convertibles and set SW_DOCK=1 when in laptop-mode (in tandem with setting SW_TABLET_MODE=0). This causes userspace to think the laptop is docked to a port-replicator and to disable suspend-on-lid-close, which is undesirable. Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting. Note this may theoretically cause us to stop reporting SW_DOCK on some device where the 0xCA and 0xCB intel-vbtn events are actually used for reporting docking to a classic docking-station / port-replicator but I'm not aware of any such devices. Also the most important thing is that we only report SW_DOCK when it reliably reports being docked to a classic docking-station without any false positives, which clearly is not the case here. If there is a chance of reporting false positives then it is better to not report SW_DOCK at all. Cc: stable@vger.kernel.org Signed-off-by:
-
