- 31 Jan, 2020 40 commits
-
-
Wei Yang authored
totalram_pages_set() was introduced in commit ca79b0c2 ("mm: convert totalram_pages and totalhigh_pages variables to atomic"), but no one uses it. Link: http://lkml.kernel.org/r/20191218005543.24146-1-richardw.yang@linux.intel.comSigned-off-by:
Wei Yang <richardw.yang@linux.intel.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Yu Zhao authored
The check was intended to make sure we don't overrun page flags. But it's obsolete because it doesn't include LAST_CPUPID_WIDTH nor KASAN_TAG_WIDTH. Just remove check since we already have it covered in linux/page-flags-layout.h (near the end of the file). Link: http://lkml.kernel.org/r/20191208183508.89177-1-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Reviewed-by:
-
Dan Carpenter authored
The "pool" pointer can be NULL at the end of the init_zswap(). (We would allocate a new pool later in that situation) So in the error handling then we need to make sure pool is a valid pointer before calling "zswap_pool_destroy(pool);" because that function dereferences the argument. Link: http://lkml.kernel.org/r/20200114050902.og32fkllkod5ycf5@kili.mountain Fixes: 93d4dfa9fbd0 ("mm/zswap.c: add allocation hysteresis if pool limit is hit") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by:
-
Vitaly Wool authored
zswap will always try to shrink pool when zswap is full. If there is a high pressure on zswap it will result in flipping pages in and out zswap pool without any real benefit, and the overall system performance will drop. The previous discussion on this subject [1] ended up with a suggestion to implement a sort of hysteresis to refuse taking pages into zswap pool until it has sufficient space if the limit has been hit. This is my take on this. Hysteresis is controlled with a sysfs-configurable parameter (namely, /sys/kernel/debug/zswap/accept_threhsold_percent). It specifies the threshold at which zswap would start accepting pages again after it became full. Setting this parameter to 100 disables the hysteresis and sets the zswap behavior to pre-hysteresis state. [1] https://lkml.org/lkml/2019/11/8/949 Link: http://lkml.kernel.org/r/20200108200118.15563-1-vitaly.wool@konsulko.comSigned-off-by:
Vitaly Wool <vitaly.wool@konsulko.com> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by:
-
Qian Cai authored
It makes sense to call the WARN_ON_ONCE(zone_idx(zone) == ZONE_MOVABLE) from start_isolate_page_range(), but should avoid triggering it from userspace, i.e, from is_mem_section_removable() because it could crash the system by a non-root user if warn_on_panic is set. While at it, simplify the code a bit by removing an unnecessary jump label. Link: http://lkml.kernel.org/r/20200120163915.1469-1-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Suggested-by:
Michal Hocko <mhocko@kernel.org> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
-
Qian Cai authored
It is not that hard to trigger lockdep splats by calling printk from under zone->lock. Most of them are false positives caused by lock chains introduced early in the boot process and they do not cause any real problems (although most of the early boot lock dependencies could happen after boot as well). There are some console drivers which do allocate from the printk context as well and those should be fixed. In any case, false positives are not that trivial to workaround and it is far from optimal to lose lockdep functionality for something that is a non-issue. So change has_unmovable_pages() so that it no longer calls dump_page() itself - instead it returns a "struct page *" of the unmovable page back to the caller so that in the case of a has_unmovable_pages() failure, the caller can call dump_page() after releasing zone->lock. Also, make dump_page() is able to report a CMA page as well, so the reason string from has_unmovable_pages() can be removed. Even though has_unmovable_pages doesn't hold any reference to the returned page this should be reasonably safe for the purpose of reporting the page (dump_page) because it cannot be hotremoved in the context of memory unplug. The state of the page might change but that is the case even with the existing code as zone->lock only plays role for free pages. While at it, remove a similar but unnecessary debug-only printk() as well. A sample of one of those lockdep splats is, WARNING: possible circular locking dependency detected ------------------------------------------------------ test.sh/8653 is trying to acquire lock: ffffffff865a4460 (console_owner){-.-.}, at: console_unlock+0x207/0x750 but task is already holding lock: ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at: __offline_isolated_pages+0x179/0x3e0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&(&zone->lock)->rlock){-.-.}: __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 _raw_spin_lock+0x2f/0x40 rmqueue_bulk.constprop.21+0xb6/0x1160 get_page_from_freelist+0x898/0x22c0 __alloc_pages_nodemask+0x2f3/0x1cd0 alloc_pages_current+0x9c/0x110 allocate_slab+0x4c6/0x19c0 new_slab+0x46/0x70 ___slab_alloc+0x58b/0x960 __slab_alloc+0x43/0x70 __kmalloc+0x3ad/0x4b0 __tty_buffer_request_room+0x100/0x250 tty_insert_flip_string_fixed_flag+0x67/0x110 pty_write+0xa2/0xf0 n_tty_write+0x36b/0x7b0 tty_write+0x284/0x4c0 __vfs_write+0x50/0xa0 vfs_write+0x105/0x290 redirected_tty_write+0x6a/0xc0 do_iter_write+0x248/0x2a0 vfs_writev+0x106/0x1e0 do_writev+0xd4/0x180 __x64_sys_writev+0x45/0x50 do_syscall_64+0xcc/0x76c entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #2 (&(&port->lock)->rlock){-.-.}: __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 _raw_spin_lock_irqsave+0x3a/0x50 tty_port_tty_get+0x20/0x60 tty_port_default_wakeup+0xf/0x30 tty_port_tty_wakeup+0x39/0x40 uart_write_wakeup+0x2a/0x40 serial8250_tx_chars+0x22e/0x440 serial8250_handle_irq.part.8+0x14a/0x170 serial8250_default_handle_irq+0x5c/0x90 serial8250_interrupt+0xa6/0x130 __handle_irq_event_percpu+0x78/0x4f0 handle_irq_event_percpu+0x70/0x100 handle_irq_event+0x5a/0x8b handle_edge_irq+0x117/0x370 do_IRQ+0x9e/0x1e0 ret_from_intr+0x0/0x2a cpuidle_enter_state+0x156/0x8e0 cpuidle_enter+0x41/0x70 call_cpuidle+0x5e/0x90 do_idle+0x333/0x370 cpu_startup_entry+0x1d/0x1f start_secondary+0x290/0x330 secondary_startup_64+0xb6/0xc0 -> #1 (&port_lock_key){-.-.}: __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 _raw_spin_lock_irqsave+0x3a/0x50 serial8250_console_write+0x3e4/0x450 univ8250_console_write+0x4b/0x60 console_unlock+0x501/0x750 vprintk_emit+0x10d/0x340 vprintk_default+0x1f/0x30 vprintk_func+0x44/0xd4 printk+0x9f/0xc5 -> #0 (console_owner){-.-.}: check_prev_add+0x107/0xea0 validate_chain+0x8fc/0x1200 __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 console_unlock+0x269/0x750 vprintk_emit+0x10d/0x340 vprintk_default+0x1f/0x30 vprintk_func+0x44/0xd4 printk+0x9f/0xc5 __offline_isolated_pages.cold.52+0x2f/0x30a offline_isolated_pages_cb+0x17/0x30 walk_system_ram_range+0xda/0x160 __offline_pages+0x79c/0xa10 offline_pages+0x11/0x20 memory_subsys_offline+0x7e/0xc0 device_offline+0xd5/0x110 state_store+0xc6/0xe0 dev_attr_store+0x3f/0x60 sysfs_kf_write+0x89/0xb0 kernfs_fop_write+0x188/0x240 __vfs_write+0x50/0xa0 vfs_write+0x105/0x290 ksys_write+0xc6/0x160 __x64_sys_write+0x43/0x50 do_syscall_64+0xcc/0x76c entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: console_owner --> &(&port->lock)->rlock --> &(&zone->lock)->rlock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&zone->lock)->rlock); lock(&(&port->lock)->rlock); lock(&(&zone->lock)->rlock); lock(console_owner); *** DEADLOCK *** 9 locks held by test.sh/8653: #0: ffff88839ba7d408 (sb_writers#4){.+.+}, at: vfs_write+0x25f/0x290 #1: ffff888277618880 (&of->mutex){+.+.}, at: kernfs_fop_write+0x128/0x240 #2: ffff8898131fc218 (kn->count#115){.+.+}, at: kernfs_fop_write+0x138/0x240 #3: ffffffff86962a80 (device_hotplug_lock){+.+.}, at: lock_device_hotplug_sysfs+0x16/0x50 #4: ffff8884374f4990 (&dev->mutex){....}, at: device_offline+0x70/0x110 #5: ffffffff86515250 (cpu_hotplug_lock.rw_sem){++++}, at: __offline_pages+0xbf/0xa10 #6: ffffffff867405f0 (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x87/0x2f0 #7: ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at: __offline_isolated_pages+0x179/0x3e0 #8: ffffffff865a4920 (console_lock){+.+.}, at: vprintk_emit+0x100/0x340 stack backtrace: Hardware name: HPE ProLiant DL560 Gen10/ProLiant DL560 Gen10, BIOS U34 05/21/2019 Call Trace: dump_stack+0x86/0xca print_circular_bug.cold.31+0x243/0x26e check_noncircular+0x29e/0x2e0 check_prev_add+0x107/0xea0 validate_chain+0x8fc/0x1200 __lock_acquire+0x5b3/0xb40 lock_acquire+0x126/0x280 console_unlock+0x269/0x750 vprintk_emit+0x10d/0x340 vprintk_default+0x1f/0x30 vprintk_func+0x44/0xd4 printk+0x9f/0xc5 __offline_isolated_pages.cold.52+0x2f/0x30a offline_isolated_pages_cb+0x17/0x30 walk_system_ram_range+0xda/0x160 __offline_pages+0x79c/0xa10 offline_pages+0x11/0x20 memory_subsys_offline+0x7e/0xc0 device_offline+0xd5/0x110 state_store+0xc6/0xe0 dev_attr_store+0x3f/0x60 sysfs_kf_write+0x89/0xb0 kernfs_fop_write+0x188/0x240 __vfs_write+0x50/0xa0 vfs_write+0x105/0x290 ksys_write+0xc6/0x160 __x64_sys_write+0x43/0x50 do_syscall_64+0xcc/0x76c entry_SYSCALL_64_after_hwframe+0x49/0xbe Link: http://lkml.kernel.org/r/20200117181200.20299-1-cai@lca.pwSigned-off-by: -
David Hildenbrand authored
Patch series "mm/memory_hotplug: pass in nid to online_pages()". Simplify onlining code and get rid of find_memory_block(). Pass in the nid from the memory block we are trying to online directly, instead of manually looking it up. This patch (of 2): No need to lookup the memory block, we can directly pass in the nid. Link: http://lkml.kernel.org/r/20200113113354.6341-2-david@redhat.comSigned-off-by:
-
Miaohe Lin authored
The jump labels try_prev and none are not really needed in find_mergeable_anon_vma(), eliminate them to improve readability. Link: http://lkml.kernel.org/r/1574079844-17493-1-git-send-email-linmiaohe@huawei.comSigned-off-by:
Miaohe Lin <linmiaohe@huawei.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
David Rientjes authored
If thp defrag setting "defer" is used and a newline is *not* used when writing to the sysfs file, this is interpreted as the "defer+madvise" option. This is because we do prefix matching and if five characters are written without a newline, the current code ends up comparing to the first five bytes of the "defer+madvise" option and using that instead. Use the more appropriate sysfs_streq() that handles the trailing newline for us. Since this doubles as a nice cleanup, do it in enabled_store() as well. The current implementation relies on prefix matching: the number of bytes compared is either the number of bytes written or the length of the option being compared. With a newline, "defer\n" does not match "defer+"madvise"; without a newline, however, "defer" is considered to match "defer+madvise" (prefix matching is only comparing the first five bytes). End result is that writing "defer" is broken unless it has an additional trailing character. This means that writing "madv" in the past would match and set "madvise". With strict checking, that no longer is the case but it is unlikely anybody is currently doing this. Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2001171411020.56385@chino.kir.corp.google.com Fixes: 21440d7e ("mm, thp: add new defer+madvise defrag option") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Ralph Campbell authored
migrate_vma_insert_page() closely follows the code in: __handle_mm_fault() handle_pte_fault() do_anonymous_page() Add a call to check_stable_address_space() after locking the page table entry before inserting a ZONE_DEVICE private zero page mapping similar to page faulting a new anonymous page. Link: http://lkml.kernel.org/r/20200107211208.24595-4-rcampbell@nvidia.comSigned-off-by:Ralph Campbell <rcampbell@nvidia.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Chris Down <chris@chrisdown.name> Signed-off-by:
-
Ralph Campbell authored
Fix some comment typos and coding style clean up in preparation for the next patch. No functional changes. Link: http://lkml.kernel.org/r/20200107211208.24595-3-rcampbell@nvidia.comSigned-off-by:
Chris Down <chris@chrisdown.name> Reviewed-by:
-
Ralph Campbell authored
Addresses passed to walk_page_range() callback functions are already page aligned and don't need to be masked with PAGE_MASK. Link: http://lkml.kernel.org/r/20200107211208.24595-2-rcampbell@nvidia.comSigned-off-by:
-
Wei Yang authored
split_queue_lock protects data in struct deferred_split. We can release the lock after delete the page from deferred_split_queue. This patch moves the THP accounting out of the lock protection, which is introduced in commit 65c45377 ("mm, rmap: account shmem thp pages"). Link: http://lkml.kernel.org/r/20200110025516.23996-1-richardw.yang@linux.intel.comSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Wei Yang authored
During split huge page, it checks the property of the page. Currently we do the check on page and head without emphasizing the check is on the compound page. In case the page passed to split_huge_page_to_list is a tail page, audience would take some time to think about whether the check is on compound page or tail page itself. To make it explicit, use head instead of page for those checks. After this, audience would be more clear about the checks are on compound page and the page is used to do the split and dump error message if failed. Link: http://lkml.kernel.org/r/20200110032610.26499-2-richardw.yang@linux.intel.comSigned-off-by:
-
Wei Yang authored
The page could be a tail page, if this is the case, this BUG_ON will never be triggered. Link: http://lkml.kernel.org/r/20200110032610.26499-1-richardw.yang@linux.intel.com Fixes: e9b61f19 ("thp: reintroduce split_huge_page()") Signed-off-by:
-
David Rientjes authored
When a process cannot be oom reaped, for whatever reason, currently the list of locks that are held is currently dumped to the kernel log. Much more interesting is the stack trace of the victim that cannot be reaped. If the stack trace is dumped, we have the ability to find related occurrences in the same kernel code and hopefully solve the issue that is making it wedged. Dump the stack trace when a process fails to be oom reaped. Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2001141519280.200484@chino.kir.corp.google.comSigned-off-by:
-
Anshuman Khandual authored
Replace open function name strings with %s (__func__) in all remaining memblock_dbg() call sites. Link: http://lkml.kernel.org/r/1578285510-28261-1-git-send-email-anshuman.khandual@arm.comSigned-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by:
Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
Anshuman Khandual authored
On the s390 platform memblock.physmem array is being built by directly calling into memblock_add_range() which is a low level function not intended to be used outside of memblock. Hence lets conditionally add helper functions for physmem array when HAVE_MEMBLOCK_PHYS_MAP is enabled. Also use MAX_NUMNODES instead of 0 as node ID similar to memblock_add() and memblock_reserve(). Make memblock_add_range() a static function as it is no longer getting used outside of memblock. Link: http://lkml.kernel.org/r/1578283835-21969-1-git-send-email-anshuman.khandual@arm.comSigned-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Collin Walling <walling@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
-
Daniel Wagner authored
The sysfs file name for enabling sanity checking is called 'sanity_checks' and not 'sanity'. The name of the file has never changed since the introduction of the slub allocator. Obviously, most people turn the checks on via the command line option and not during runtime using slabinfo. Link: http://lkml.kernel.org/r/20200116131642.642-1-dwagner@suse.deSigned-off-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
-
Alex Shi authored
Commit 1b2ffb78 ("[PATCH] Zone reclaim: Allow modification of zone reclaim behavior")' defined RECLAIM_OFF/RECLAIM_ZONE, but never use them, so better to remove them. [dwagner@suse.de: fix sanity checks enabling] Link: http://lkml.kernel.org/r/20200116131642.642-1-dwagner@suse.de [akpm@linux-foundation.org: renumber the bits for neatness] Link: http://lkml.kernel.org/r/1579005573-58923-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by:
-
Alex Shi authored
This macro was never used in git history. So better to remove. Link: http://lkml.kernel.org/r/1579006500-127143-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Liu Song authored
The return value of shrink_node is not used, so remove unnecessary operations. Link: http://lkml.kernel.org/r/20191128143524.3223-1-fishland@aliyun.comSigned-off-by:
Liu Song <liu.song11@zte.com.cn> Reviewed-by:
-
David Hildenbrand authored
Now that the memory isolate notifier is gone, the parameter is always 0. Drop it and cleanup has_unmovable_pages(). Link: http://lkml.kernel.org/r/20191114131911.11783-3-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
Luckily, we have no users left, so we can get rid of it. Cleanup set_migratetype_isolate() a little bit. Link: http://lkml.kernel.org/r/20191114131911.11783-2-david@redhat.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
-
Kirill A. Shutemov authored
memmap_init_zone() can be called on the ranges with holes during the boot. It will skip any non-valid PFNs one-by-one. It works fine as long as holes are not too big. But huge holes in the memory map causes a problem. It takes over 20 seconds to walk 32TiB hole. x86-64 with 5-level paging allows for much larger holes in the memory map which would practically hang the system. Deferred struct page init doesn't help here. It only works on the present ranges. Skipping non-present sections would fix the issue. Link: http://lkml.kernel.org/r/20191230093828.24613-1-kirill.shutemov@linux.intel.comSigned-off-by:
Baoquan He <bhe@redhat.com> Acked-by:
-
Andy Shevchenko authored
%pa takes into consideration the special types such as resource_size_t. Use this specifier %instead of explicit casting. Link: http://lkml.kernel.org/r/20191209165413.56263-1-andriy.shevchenko@linux.intel.comSigned-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Gustavo A. R. Silva authored
In case memory resources for _ptr2_ were allocated, release them before return. Notice that in case _ptr1_ happens to be NULL, krealloc() behaves exactly like kmalloc(). Addresses-Coverity-ID: 1490594 ("Resource leak") Link: http://lkml.kernel.org/r/20200123160115.GA4202@embeddedor Fixes: 3f15801c ("lib: add kasan test module") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Junyong Sun authored
Print the call_site ip of kmem_alloc_node using '%pS' to improve the readability of raw slab trace points. Link: http://lkml.kernel.org/r/1577949568-4518-1-git-send-email-sunjunyong@xiaomi.comSigned-off-by:
Junyong Sun <sunjunyong@xiaomi.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Changbin Du <changbin.du@intel.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by:
-
Li Xinhai authored
When check_pte, pfn of normal, hugetlbfs and THP page need be compared. The current implementation apply comparison as - normal 4K page: page_pfn <= pfn < page_pfn + 1 - hugetlbfs page: page_pfn <= pfn < page_pfn + HPAGE_PMD_NR - THP page: page_pfn <= pfn < page_pfn + HPAGE_PMD_NR in pfn_in_hpage. For hugetlbfs page, it should be page_pfn == pfn Now, change pfn_in_hpage to pfn_is_match to highlight that comparison is not only for THP and explicitly compare for these cases. No impact upon current behavior, just make the code clear. I think it is important to make the code clear - comparing hugetlbfs page in range page_pfn <= pfn < page_pfn + HPAGE_PMD_NR is confusing. Link: http://lkml.kernel.org/r/1578737885-8890-1-git-send-email-lixinhai.lxh@gmail.comSigned-off-by:
Li Xinhai <lixinhai.lxh@gmail.com> Acked-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
-
Kaitao Cheng authored
Compound pages handling in mem_cgroup_migrate is more convoluted than necessary. The state is duplicated in compound variable and the same could be achieved by PageTransHuge check which is trivial and hpage_nr_pages is already PageTransHuge aware. It is much simpler to just use hpage_nr_pages for nr_pages and replace the local variable by PageTransHuge check directly Link: http://lkml.kernel.org/r/20191210160450.3395-1-pilgrimtao@gmail.comSigned-off-by:
Kaitao Cheng <pilgrimtao@gmail.com> Acked-by:
-
Vasily Averin authored
If seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. In Aug 2018 NeilBrown noticed commit 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code and interface") "Some ->next functions do not increment *pos when they return NULL... Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps" Described problem is still actual. If you make lseek into middle of last output line following read will output end of last line and whole last line once again. $ dd if=/proc/swaps bs=1 # usual output Filename Type Size Used Priority /dev/dm-0 partition 4194812 97536 -2 104+0 records in 104+0 records out 104 bytes copied $ dd if=/proc/swaps bs=40 skip=1 # last line was generated twice dd: /proc/swaps: cannot skip to specified offset v/dm-0 partition 4194812 97536 -2 /dev/dm-0 partition 4194812 97536 -2 3+1 records in 3+1 records out 131 bytes copied https://bugzilla.kernel.org/show_bug.cgi?id=206283 Link: http://lkml.kernel.org/r/bd8cfd7b-ac95-9b91-f9e7-e8438bd5047d@virtuozzo.comSigned-off-by:
Vasily Averin <vvs@virtuozzo.com> Reviewed-by:
-
John Hubbard authored
In order to provide a clearer, more symmetric API for pinning and unpinning DMA pages. This way, pin_user_pages*() calls match up with unpin_user_pages*() calls, and the API is a lot closer to being self-explanatory. Link: http://lkml.kernel.org/r/20200107224558.2362728-23-jhubbard@nvidia.comSigned-off-by:
Jan Kara <jack@suse.cz> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
John Hubbard authored
Fix the gup benchmark flags to use the symbolic FOLL_WRITE, instead of a hard-coded "1" value. Also, clean up the filtering of gup flags a little, by just doing it once before issuing any of the get_user_pages*() calls. This makes it harder to overlook, instead of having little "gup_flags & 1" phrases in the function calls. Link: http://lkml.kernel.org/r/20200107224558.2362728-22-jhubbard@nvidia.comSigned-off-by:
Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
John Hubbard authored
1. Convert from get_user_pages() to pin_user_pages(). 2. As required by pin_user_pages(), release these pages via put_user_page(). Link: http://lkml.kernel.org/r/20200107224558.2362728-21-jhubbard@nvidia.comSigned-off-by:
-
John Hubbard authored
1. Change vfio from get_user_pages_remote(), to pin_user_pages_remote(). 2. Because all FOLL_PIN-acquired pages must be released via put_user_page(), also convert the put_page() call over to put_user_pages_dirty_lock(). Note that this effectively changes the code's behavior in vfio_iommu_type1.c: put_pfn(): it now ultimately calls set_page_dirty_lock(), instead of set_page_dirty(). This is probably more accurate. As Christoph Hellwig put it, "set_page_dirty() is only safe if we are dealing with a file backed page where we have reference on the inode it hangs off." [1] [1] https://lore.kernel.org/r/20190723153640.GB720@lst.de Link: http://lkml.kernel.org/r/20200107224558.2362728-20-jhubbard@nvidia.comSigned-off-by:
Alex Williamson <alex.williamson@redhat.com> Acked-by:
-
John Hubbard authored
1. Change v4l2 from get_user_pages() to pin_user_pages(). 2. Because all FOLL_PIN-acquired pages must be released via put_user_page(), also convert the put_page() call over to put_user_pages_dirty_lock(). Link: http://lkml.kernel.org/r/20200107224558.2362728-19-jhubbard@nvidia.comSigned-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
John Hubbard authored
Convert net/xdp to use the new pin_longterm_pages() call, which sets FOLL_PIN. Setting FOLL_PIN is now required for code that requires tracking of pinned pages. In partial anticipation of this work, the net/xdp code was already calling put_user_page() instead of put_page(). Therefore, in order to convert from the get_user_pages()/put_page() model, to the pin_user_pages()/put_user_page() model, the only change required here is to change get_user_pages() to pin_user_pages(). Link: http://lkml.kernel.org/r/20200107224558.2362728-18-jhubbard@nvidia.comSigned-off-by:
Björn Töpel <bjorn.topel@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
John Hubbard authored
Convert fs/io_uring to use the new pin_user_pages() call, which sets FOLL_PIN. Setting FOLL_PIN is now required for code that requires tracking of pinned pages, and therefore for any code that calls put_user_page(). In partial anticipation of this work, the io_uring code was already calling put_user_page() instead of put_page(). Therefore, in order to convert from the get_user_pages()/put_page() model, to the pin_user_pages()/put_user_page() model, the only change required here is to change get_user_pages() to pin_user_pages(). Link: http://lkml.kernel.org/r/20200107224558.2362728-17-jhubbard@nvidia.comSigned-off-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
-
John Hubbard authored
Convert drm/via to use the new pin_user_pages_fast() call, which sets FOLL_PIN. Setting FOLL_PIN is now required for code that requires tracking of pinned pages, and therefore for any code that calls put_user_page(). In partial anticipation of this work, the drm/via driver was already calling put_user_page() instead of put_page(). Therefore, in order to convert from the get_user_pages()/put_page() model, to the pin_user_pages()/put_user_page() model, the only change required is to change get_user_pages() to pin_user_pages(). Link: http://lkml.kernel.org/r/20200107224558.2362728-16-jhubbard@nvidia.comSigned-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Jérôme Glisse <jglisse@redhat.com> Reviewed-by:
-
John Hubbard authored
Convert process_vm_access to use the new pin_user_pages_remote() call, which sets FOLL_PIN. Setting FOLL_PIN is now required for code that requires tracking of pinned pages. Also, release the pages via put_user_page*(). Also, rename "pages" to "pinned_pages", as this makes for easier reading of process_vm_rw_single_vec(). Link: http://lkml.kernel.org/r/20200107224558.2362728-15-jhubbard@nvidia.comSigned-off-by:
-
