- 07 May, 2012 23 commits
-
-
Greg Kroah-Hartman authored
This reverts commit d39514c1 which is e90fc3cb upstream as it causes oopses on some ppc systems. Reported-by:
Chen Peter-B29397 <B29397@freescale.com> Cc: Ramneek Mehresh <ramneek.mehresh@freescale.com> Cc: Peter Chen <peter.chen@freescale.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Al Viro authored
commit 04da6e9d upstream. nfsd_open() already returns an NFS error value; only vfs_test_lock() result needs to be fed through nfserrno(). Broken by commit 55ef12 (nfsd: Ensure nfsv4 calls the underlying filesystem on LOCKT) three years ago... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
-
Al Viro authored
commit 96f6f985 upstream. ..._want_write() returns -EROFS on failure, _not_ an NFS error value. Signed-off-by:
-
Eric Bénard authored
commit b8915282 upstream. This was broken by me in 37865fe9 ("mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci") where more extensive tests would have shown that read or write of data to the card were failing (even if the partition table was correctly read). Signed-off-by:
Eric Bénard <eric@eukrea.com> Acked-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Alex Williamson authored
commit 32f6daad upstream. We've been adding new mappings, but not destroying old mappings. This can lead to a page leak as pages are pinned using get_user_pages, but only unpinned with put_page if they still exist in the memslots list on vm shutdown. A memslot that is destroyed while an iommu domain is enabled for the guest will therefore result in an elevated page reference count that is never cleared. Additionally, without this fix, the iommu is only programmed with the first translation for a gpa. This can result in peer-to-peer errors if a mapping is destroyed and replaced by a new mapping at the same gpa as the iommu will still be pointing to the original, pinned memory address. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
David Miller authored
commit e88aa7bb upstream. The symbol table on x86-64 starts to have entries that have names like: _GLOBAL__sub_I_65535_0___mod_x86cpu_device_table They are of type STT_FUNCTION and this one had a length of 18. This matched the device ID validation logic and it barfed because the length did not meet the device type's criteria. -------------------- FATAL: arch/x86/crypto/aesni-intel: sizeof(struct x86cpu_device_id)=16 is not a modulo of the size of section __mod_x86cpu_device_table=18. Fix definition of struct x86cpu_device_id in mod_devicetable.h -------------------- These are some kind of compiler tool internal stuff being emitted and not something we want to inspect in modpost's device ID table validation code. So skip the symbol if it is not of type STT_OBJECT. Signed-off-by:
David S. Miller <davem@davemloft.net> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Arend van Spriel authored
commit badc4f07 upstream. There have been reports about not being able to use access-points on channel 12 and 13 or having connectivity issues when these channels were part of the selected regulatory domain. Upon switching to these channels the brcmsmac driver suspends the transmit dma fifos. This patch resumes them upon handing over the first received beacon to mac80211. This patch is to be applied to the stable tree for kernel versions 3.2 and 3.3. Tested-by:
Francesco Saverio Schiavarelli <fschiava@libero.it> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Brett Rudley <brudley@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Alan Stern authored
commit dc75ce9d upstream. This patch (as1542) changes the criterion ehci-hcd uses to tell when it needs to resume the controller's root hub. A resume is needed when a port status change is detected, obviously, but only if the root hub is currently suspended. Right now the driver tests whether the root hub is running, and that is not the correct test. In particular, if the controller has died then the root hub should not be restarted. In addition, some buggy hardware occasionally requires the root hub to be running and sending out SOF packets even while it is nominally supposed to be suspended. In the end, the test needs to be changed. Rather than checking whether the root hub is currently running, the driver will now check whether the root hub is currently suspended. This will yield the correct behavior in all cases. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Peter Chen <B29397@freescale.com> Signed-off-by:
-
Johannes Berg authored
commit 2b5f8b0b upstream. [backported by Ben Greear] The nl80211 handling code should ensure as much as it can that the interface is in a valid state, it can certainly ensure the interface is running. Not doing so can cause calls through mac80211 into the driver that result in warnings and unspecified behaviour in the driver. Reported-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Xi Wang authored
commit 44afb3a0 upstream. On 32-bit systems, a large args->num_cliprects from userspace via ioctl may overflow the allocation size, leading to out-of-bounds access. This vulnerability was introduced in commit 432e58ed ("drm/i915: Avoid allocation for execbuffer object list"). Signed-off-by:
Xi Wang <xi.wang@gmail.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Xi Wang authored
commit ed8cd3b2 upstream. On 32-bit systems, a large args->buffer_count from userspace via ioctl may overflow the allocation size, leading to out-of-bounds access. This vulnerability was introduced in commit 8408c282 ("drm/i915: First try a normal large kmalloc for the temporary exec buffers"). Signed-off-by:
-
Daniel Vetter authored
commit 6651819b upstream. We seem to have a decent confusion between the output timings and the input timings of the sdvo encoder. If I understand the code correctly, we use the original mode unchanged for the output timings, safe for the lvds case. And we should use the adjusted mode for input timings. Clarify the situation by adding an explicit output_dtd to the sdvo mode_set function and streamline the code-flow by moving the input and output mode setting in the sdvo encode together. Furthermore testing showed that the sdvo input timing needs the unadjusted dotclock, the sdvo chip will automatically compute the required pixel multiplier to get a dotclock above 100 MHz. Fix this up when converting a drm mode to an sdvo dtd. This regression was introduced in commit c74696b9 Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 2 14:46:34 2010 -0400 i915: revert some checks added by commit 32aad86f particularly the following hunk: # diff --git a/drivers/gpu/drm/i915/intel_sdvo.c # b/drivers/gpu/drm/i915/intel_sdvo.c # index 093e914..62d22ae 100644 # --- a/drivers/gpu/drm/i915/intel_sdvo.c # +++ b/drivers/gpu/drm/i915/intel_sdvo.c # @@ -1122,11 +1123,9 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, # # /* We have tried to get input timing in mode_fixup, and filled into # adjusted_mode */ # - if (intel_sdvo->is_tv || intel_sdvo->is_lvds) { # - intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); # + intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); # + if (intel_sdvo->is_tv || intel_sdvo->is_lvds) # input_dtd.part2.sdvo_flags = intel_sdvo->sdvo_flags; # - } else # - intel_sdvo_get_dtd_from_mode(&input_dtd, mode); # # /* If it's a TV, we already set the output timing in mode_fixup. # * Otherwise, the output timing is equal to the input timing. Due to questions raised in review, below a more elaborate analysis of the bug at hand: Sdvo seems to have two timings, one is the output timing which will be sent over whatever is connected on the other side of the sdvo chip (panel, hdmi screen, tv), the other is the input timing which will be generated by the gmch pipe. It looks like sdvo is expected to scale between the two. To make things slightly more complicated, we have a bunch of special cases: - For lvds panel we always use a fixed output timing, namely intel_sdvo->sdvo_lvds_fixed_mode, hence that special case. - Sdvo has an interface to generate a preferred input timing for a given output timing. This is the confusing thing that I've tried to clear up with the follow-on patches. - A special requirement is that the input pixel clock needs to be between 100MHz and 200MHz (likely to keep it within the electromechanical design range of PCIe), 270MHz on later gen4+. Lower pixel clocks are doubled/quadrupled. The thing this patch tries to fix is that the pipe needs to be explicitly instructed to double/quadruple the pixels and needs the correspondingly higher pixel clock, whereas the sdvo adaptor seems to do that itself and needs the unadjusted pixel clock. For the sdvo encode side we already set the pixel mutliplier with a different command (0x21). This patch tries to fix this mess by: - Keeping the output mode timing in the unadjusted plain mode, safe for the lvds case. - Storing the input timing in the adjusted_mode with the adjusted pixel clock. This way we don't need to frob around with the core crtc mode set code. - Fixing up the pixelclock when constructing the sdvo dtd timing struct. This is why the first hunk of the patch is an integral part of the series. - Dropping the is_tv special case because input_dtd is equivalent to adjusted_mode after these changes. Follow-up patches clear this up further (by simply ripping out intel_sdvo->input_dtd because it's not needed). v2: Extend commit message with an in-depth bug analysis. Reported-and-Tested-by:
Bernard Blackham <b-linuxgit@largestprime.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48157Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Guenter Roeck authored
commit c3e40a99 upstream. pci_match_id() takes an *array* of IDs which must be properly zero- terminated. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Andre Przywara authored
commit 00250ec9 upstream. Newer BKDG[1] versions recommend a different initialization value for the running average range register in the northbridge. This improves the power reading by avoiding counter saturations resulting in bogus values for anything below about 80% of TDP power consumption. Updated BIOSes will have this new value set up from the beginning, but meanwhile we correct this value ourselves. This needs to be done on all northbridges, even on those where the driver itself does not register at. This fixes the driver on all current machines to provide proper values for idle load. [1] http://support.amd.com/us/Processor_TechDocs/42301_15h_Mod_00h-0Fh_BKDG.pdf Chapter 3.8: D18F5xE0 Processor TDP Running Average (p. 452) Signed-off-by:
Andre Przywara <andre.przywara@amd.com> Acked-by:
-
Nicolas Ferre authored
commit ed8b0d67 upstream. This loop on EBCISR register was designed to clear IRQ sources before enabling a DMA channel. This register is clear-on-read so a race condition can appear if another channel is already active and has just finished its transfer. Removing this read on EBCISR is fixing the issue as there is no case where an IRQ could be pending: we already make sure that this register is drained at probe() time and during resume. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by:
-
Mark Brown authored
commit 7e1f7c8a upstream. Line widgets had not been included in either the power up or power down sequences so if a widget had an event associated with it that event would never be run. Fix this minimally by adding them to the sequences, we should probably be doing away with the specific widget types as they all have the same priority anyway. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit cf405ae6 upstream. When we boot on a machine that can hotplug CPUs and we are using 'dom0_max_vcpus=X' on the Xen hypervisor line to clip the amount of CPUs available to the initial domain, we get this: (XEN) Command line: com1=115200,8n1 dom0_mem=8G noreboot dom0_max_vcpus=8 sync_console mce_verbosity=verbose console=com1,vga loglvl=all guest_loglvl=all .. snip.. DMI: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.99.99.x032.072520111118 07/25/2011 .. snip. SMP: Allowing 64 CPUs, 32 hotplug CPUs installing Xen timer for CPU 7 cpu 7 spinlock event irq 361 NMI watchdog: disabled (cpu7): hardware events not enabled Brought up 8 CPUs .. snip.. [acpi processor finds the CPUs are not initialized and starts calling arch_register_cpu, which creates /sys/devices/system/cpu/cpu8/online] CPU 8 got hotplugged CPU 9 got hotplugged CPU 10 got hotplugged .. snip.. initcall 1_acpi_battery_init_async+0x0/0x1b returned 0 after 406 usecs calling erst_init+0x0/0x2bb @ 1 [and the scheduler sticks newly started tasks on the new CPUs, but said CPUs cannot be initialized b/c the hypervisor has limited the amount of vCPUS to 8 - as per the dom0_max_vcpus=8 flag. The spinlock tries to kick the other CPU, but the structure for that is not initialized and we crash.] BUG: unable to handle kernel paging request at fffffffffffffed8 IP: [<ffffffff81035289>] xen_spin_lock+0x29/0x60 PGD 180d067 PUD 180e067 PMD 0 Oops: 0002 [#1] SMP CPU 7 Modules linked in: Pid: 1, comm: swapper/0 Not tainted 3.4.0-rc2upstream-00001-gf5154e8 #1 Intel Corporation S2600CP/S2600CP RIP: e030:[<ffffffff81035289>] [<ffffffff81035289>] xen_spin_lock+0x29/0x60 RSP: e02b:ffff8801fb9b3a70 EFLAGS: 00010282 With this patch, we cap the amount of vCPUS that the initial domain can run, to exactly what dom0_max_vcpus=X has specified. In the future, if there is a hypercall that will allow a running domain to expand past its initial set of vCPUS, this patch should be re-evaluated. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
David Vrabel authored
commit 7eb7ce4d upstream. In xen_restore_fl_direct(), xen_force_evtchn_callback() was being called even if no events were pending. This resulted in (depending on workload) about a 100 times as many xen_version hypercalls as necessary. Fix this by correcting the sense of the conditional jump. This seems to give a significant performance benefit for some workloads. There is some subtle tricksy "..since the check here is trying to check both pending and masked in a single cmpw, but I think this is correct. It will call check_events now only when the combined mask+pending word is 0x0001 (aka unmasked, pending)." (Ian) Acked-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Linus Torvalds authored
commit fcbf94b9 upstream. This reverts commit a32744d4. While that commit was technically the right thing to do, and made the x86-64 compat mode work identically to native 32-bit mode (and thus fixing the problem with a 32-bit systemd install on a 64-bit kernel), it turns out that the automount binaries had workarounds for this compat problem. Now, the workarounds are disgusting: doing an "uname()" to find out the architecture of the kernel, and then comparing it for the 64-bit cases and fixing up the size of the read() in automount for those. And they were confused: it's not actually a generic 64-bit issue at all, it's very much tied to just x86-64, which has different alignment for an 'u64' in 64-bit mode than in 32-bit mode. But the end result is that fixing the compat layer actually breaks the case of a 32-bit automount on a x86-64 kernel. There are various approaches to fix this (including just doing a "strcmp()" on current->comm and comparing it to "automount"), but I think that I will do the one that teaches pipes about a special "packet mode", which will allow user space to not have to care too deeply about the padding at the end of the autofs packet. That change will make the compat workaround unnecessary, so let's revert it first, and get automount working again in compat mode. The packetized pipes will then fix autofs for systemd. Reported-and-requested-by:
Michael Tokarev <mjt@tls.msk.ru> Cc: Ian Kent <raven@themaw.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Bryan O'Donoghue authored
commit cbf2829b upstream. Current APIC code assumes MSR_IA32_APICBASE is present for all systems. Pentium Classic P5 and friends didn't have this MSR. MSR_IA32_APICBASE was introduced as an architectural MSR by Intel @ P6. Code paths that can touch this MSR invalidly are when vendor == Intel && cpu-family == 5 and APIC bit is set in CPUID - or when you simply pass lapic on the kernel command line, on a P5. The below patch stops Linux incorrectly interfering with the MSR_IA32_APICBASE for P5 class machines. Other code paths exist that touch the MSR - however those paths are not currently reachable for a conformant P5. Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linux.intel.com> Link: http://lkml.kernel.org/r/4F8EEDD3.1080404@linux.intel.comSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Trond Myklebust authored
commit 55725513 upstream. Since we may be simulating flock() locks using NFS byte range locks, we can't rely on the VFS having checked the file open mode for us. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Trond Myklebust authored
commit 05ffe24f upstream. All callers of nfs4_handle_exception() that need to handle NFS4ERR_OPENMODE correctly should set exception->inode Signed-off-by:
-
Jan Kara authored
commit 98a2139f upstream. When hostname contains colon (e.g. when it is an IPv6 address) it needs to be enclosed in brackets to make parsing of NFS device string possible. Fix nfs_do_root_mount() to enclose hostname properly when needed. NFS code actually does not need this as it does not parse the string passed by nfs_do_root_mount() but the device string is exposed to userspace in /proc/mounts. CC: Josh Boyer <jwboyer@redhat.com> CC: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
- 27 Apr, 2012 17 commits
-
-
Greg Kroah-Hartman authored
-
Neal Cardwell authored
[ Upstream commit d135c522 ] Commit f5fff5dc forgot to fix TCP_MAXSEG behavior IPv6 sockets, so IPv6 TCP server sockets that used TCP_MAXSEG would find that the advmss of child sockets would be incorrect. This commit mirrors the advmss logic from tcp_v4_syn_recv_sock in tcp_v6_syn_recv_sock. Eventually this logic should probably be shared between IPv4 and IPv6, but this at least fixes this issue. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 3adadc08 ] While reviewing the sysctl code in ax25 I spotted races in ax25_exit where it is possible to receive notifications and packets after already freeing up some of the data structures needed to process those notifications and updates. Call unregister_netdevice_notifier early so that the rest of the cleanup code does not need to deal with network devices. This takes advantage of my recent enhancement to unregister_netdevice_notifier to send unregister notifications of all network devices that are current registered. Move the unregistration for packet types, socket types and protocol types before we cleanup any of the ax25 data structures to remove the possibilities of other races. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 716af4ab ] MAX_ADDR_LEN is 32. ETH_ALEN is 6. mac->sa_data is a 14 byte array, so the memcpy() is doing a read past the end of the array. I asked about this on netdev and Ben Hutchings told me it's supposed to be copying ETH_ALEN bytes (thanks Ben). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit b922934d ] ops_init should free the net_generic data on init failure and __register_pernet_operations should not call ops_free when NET_NS is not enabled. Signed-off-by:
Julian Anastasov <ja@ssi.bg> Reviewed-by:
-
Eric Dumazet authored
[ Upstream commit 4d846f02 ] tcp_grow_window() has to grow rcv_ssthresh up to window_clamp, allowing sender to increase its window. tcp_grow_window() still assumes a tcp frame is under MSS, but its no longer true with LRO/GRO. This patch fixes one of the performance issue we noticed with GRO on. Signed-off-by:
-
Hiroaki SHIMODA authored
[ Upstream commit 890fdf2a ] In register_netdevice(), when ndo_init() is successful and later some error occurred, ndo_uninit() will be called. So dummy deivce is desirable to implement ndo_uninit() method to free percpu stats for this case. And, ndo_uninit() is also called along with dev->destructor() when device is unregistered, so in order to prevent dev->dstats from being freed twice, dev->destructor is modified to free_netdev(). Signed-off-by:
Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Signed-off-by:
-
Stephane Fillod authored
[ Upstream commit a99ff7d0 ] Make smsc75xx recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1492 bytes, and the host is unable to receive standard 1500-byte frames from the device. Inspired by same fix on cdc_eem 78fb72f7. Tested on ARM/Omap3 with EVB-LAN7500-LC. Signed-off-by:
Stephane Fillod <fillods@users.sf.net> Signed-off-by:
-
David Ward authored
[ Upstream commit 244b65db ] A parameter set exists for WRED mode, called wred_set, to hold the same values for qavg and qidlestart across all VQs. The WRED mode values had been previously held in the VQ for the default DP. After these values were moved to wred_set, the VQ for the default DP was no longer created automatically (so that it could be omitted on purpose, to have packets in the default DP enqueued directly to the device without using RED). However, gred_dump() was overlooked during that change; in WRED mode it still reads qavg/qidlestart from the VQ for the default DP, which might not even exist. As a result, this command sequence will cause an oops: tc qdisc add dev $DEV handle $HANDLE parent $PARENT gred setup \ DPs 3 default 2 grio tc qdisc change dev $DEV handle $HANDLE gred DP 0 prio 8 $RED_OPTIONS tc qdisc change dev $DEV handle $HANDLE gred DP 1 prio 8 $RED_OPTIONS This fixes gred_dump() in WRED mode to use the values held in wred_set. Signed-off-by:
David Ward <david.ward@ll.mit.edu> Signed-off-by:
-
Davide Ciminaghi authored
[ Upstream commit 8a9a0ea6 ] At the beginning of ks_rcv(), a for loop retrieves the header information relevant to all the frames stored in the mac's internal buffers. The number of pending frames is stored as an 8 bits field in KS_RXFCTR. If interrupts are disabled long enough to allow for more than 32 frames to accumulate in the MAC's internal buffers, a buffer overflow occurs. This patch fixes the problem by making the driver's frame_head_info buffer big enough. Well actually, since the chip appears to have 12K of internal rx buffers and the shortest ethernet frame should be 64 bytes long, maybe the limit could be set to 12*1024/64 = 192 frames, but 255 should be safer. Signed-off-by:
Davide Ciminaghi <ciminaghi@gnudd.com> Signed-off-by:
Raffaele Recalcati <raffaele.recalcati@bticino.it> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 3c5e979b ] The SMSC911x driver resets the ->head, ->data and ->tail pointers in the skb on the reset path in order to avoid buffer overflow due to packet padding performed by the hardware. This patch fixes the receive path so that the skb pointers are fixed up after the data has been read from the device, The error path is also fixed to use number of words consistently and prevent erroneous FIFO fastforwarding when skipping over bad data. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit a8c9cb10 ] We set intr mask before its handler is registered, this does not work well when 8139cp is sharing irq line with other devices. As the irq could be enabled by the device before 8139cp's hander is registered which may lead unhandled irq. Fix this by introducing an helper cp_irq_enable() and call it after request_irq(). Signed-off-by:
Jason Wang <jasowang@redhat.com> Reviewed-by:
Flavio Leitner <fbl@redhat.com> Signed-off-by:
-
Tony Zelenoff authored
[ Upstream commit 03662e41 ] Problem: There was two separate work_struct structures which share one handler. Unfortunately getting atl1_adapter structure from work_struct in case of DMA error was done from incorrect offset which cause kernel panics. Solution: The useless work_struct for DMA error removed and handler name changed to more generic one. Signed-off-by:
Tony Zelenoff <antonz@parallels.com> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 18a223e0 ] Fix a code path in tcp_rcv_rtt_update() that was comparing scaled and unscaled RTT samples. The intent in the code was to only use the 'm' measurement if it was a new minimum. However, since 'm' had not yet been shifted left 3 bits but 'new_sample' had, this comparison would nearly always succeed, leading us to erroneously set our receive-side RTT estimate to the 'm' sample when that sample could be nearly 8x too high to use. The overall effect is to often cause the receive-side RTT estimate to be significantly too large (up to 40% too large for brief periods in my tests). Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 110c4330 ] As soon as an skb is queued into socket error queue, another thread can consume it, so we are not allowed to reference skb anymore, or risk use after free. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 4a7e7c2a ] As soon as an skb is queued into socket receive_queue, another thread can consume it, so we are not allowed to reference skb anymore, or risk use after free. Signed-off-by:
-
Phil Sutter authored
[ Upstream commit 4eee6a3a ] This happened on a machine with a custom hotplug script calling nameif, probably due to slow firmware loading. At the time nameif uses ethtool to gather interface information, i2400m->fw_name is zero and so a null pointer dereference occurs from within i2400m_get_drvinfo(). Signed-off-by:
Phil Sutter <phil.sutter@viprinet.com> Signed-off-by:
-
