- 23 Jun, 2022 1 commit
-
-
Li Nan authored
Since commit 83cbce95("block: add error handling for device_add_disk / add_disk"), bdev->bd_holder_dir can not be empty now, so remove WARN_ON() from bd_link_disk_holder. Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220623074100.2251301-1-linan122@huawei.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
- 21 Jun, 2022 1 commit
-
-
Jens Axboe authored
If rq_qos_throttle() ends up blocking, then we will have invalidated and flushed our current plug. Since blk_mq_get_cached_request() hasn't popped the cached request off the plug list just yet, we end holding a pointer to a request that is no longer valid. This insta-crashes with rq->mq_hctx being NULL in the validity checks just after. Pop the request off the cached list before doing rq_qos_throttle() to avoid using a potentially stale request. Fixes: 0a5aa8d1 ("block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection") Reported-by: Dylan Yudaken <dylany@fb.com> Tested-by: Dylan Yudaken <dylany@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 20 Jun, 2022 1 commit
-
-
Damien Le Moal authored
The request queue pointer in struct blk_independent_access_range is unused. Remove it. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Fixes: 41e46b3c ("block: Fix potential deadlock in blk_ia_range_sysfs_show()") Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220603053529.76405-1-damien.lemoal@opensource.wdc.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
- 17 Jun, 2022 4 commits
-
-
Christoph Hellwig authored
Freeze the queue earlier in del_gendisk so that the state does not change while we remove debugfs and sysfs files. Ming mentioned that being able to observer request in debugfs might be useful while the queue is being frozen in del_gendisk, which is made possible by this change. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220614074827.458955-5-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
The block debugfs files are created in blk_register_queue, which is called by add_disk and use a naming scheme based on the disk_name. After del_gendisk returns that name can be reused and thus we must not leave these debugfs files around, otherwise the kernel is unhappy and spews messages like: Directory XXXXX with parent 'block' already present! and the newly created devices will not have working debugfs files. Move the unregistration to blk_unregister_queue instead (which matches the sysfs unregistration) to make sure the debugfs life time rules match those of the disk name. As part of the move also make sure the whole debugfs unregistration is inside a single debugfs_mutex critical section. Note that this breaks blktests block/002, which checks that the debugfs directory has not been removed while blktests is running, but that particular check should simply be removed from the test case. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220614074827.458955-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Various places like I/O schedulers or the QOS infrastructure try to register debugfs files on demans, which can race with creating and removing the main queue debugfs directory. Use the existing debugfs_mutex to serialize all debugfs operations that rely on q->debugfs_dir or the directories hanging off it. To make the teardown code a little simpler declare all debugfs dentry pointers and not just the main one uncoditionally in blkdev.h. Move debugfs_mutex next to the dentries that it protects and document what it is used for. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220614074827.458955-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
The elevator is only used for file system requests, which are stopped in del_gendisk. Move disabling the elevator and freeing the scheduler tags to the end of del_gendisk instead of doing that work in disk_release and blk_cleanup_queue to avoid a use after free on q->tag_set from disk_release as the tag_set might not be alive at that point. Move the blk_qos_exit call as well, as it just depends on the elevator exit and would be the only reason to keep the not exactly cheap queue freeze in disk_release. Fixes: e155b0c2 ("blk-mq: Use shared tags for shared sbitmap support") Reported-by: syzbot+3e3f419f4a7816471838@syzkaller.appspotmail.com Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: syzbot+3e3f419f4a7816471838@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20220614074827.458955-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
- 16 Jun, 2022 5 commits
-
-
Bart Van Assche authored
BFQ uses io_start_time_ns. That member variable is only set if I/O statistics are enabled. Hence this patch that enables I/O statistics at the time BFQ is associated with a request queue. Compile-tested only. Reported-by: Cixi Geng <cixi.geng1@unisoc.com> Cc: Cixi Geng <cixi.geng1@unisoc.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Paolo Valente <paolo.valente@unimore.it> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Ming Lei authored
commit 364b6181 ("blk-mq: clearing flush request reference in tags->rqs[]") is added to clear the to-be-free flush request from tags->rqs[] for avoiding use-after-free on the flush rq. Yu Kuai reported that blk_mq_clear_flush_rq_mapping() slows down boot time by ~8s because running scsi probe which may create and remove lots of unpresent LUNs on megaraid-sas which uses BLK_MQ_F_TAG_HCTX_SHARED and each request queue has lots of hw queues. Improve the situation by not running blk_mq_clear_flush_rq_mapping if disk isn't added when there can't be any flush request issued. Reviewed-by: Christoph Hellwig <hch@lst.de> Reported-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220616014401.817001-4-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Ming Lei authored
q->elevator is referred in blk_mq_has_sqsched() without any protection, no .q_usage_counter is held, no queue srcu and rcu read lock is held, so potential use-after-free may be triggered. Fix the issue by adding one queue flag for checking if the elevator uses single queue style dispatch. Meantime the elevator feature flag of ELEVATOR_F_MQ_AWARE isn't needed any more. Cc: Jan Kara <jack@suse.cz> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220616014401.817001-3-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Ming Lei authored
elevator can be tore down by sysfs switch interface or disk release, so hold ->sysfs_lock before referring to q->elevator, then potential use-after-free can be avoided. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220616014401.817001-2-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Bart Van Assche authored
This patch prevents that test nvme/004 triggers the following: UBSAN: array-index-out-of-bounds in block/blk-mq.h:135:9 index 512 is out of range for type 'long unsigned int [512]' Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x3b __ubsan_handle_out_of_bounds.cold+0x44/0x49 blk_mq_alloc_request_hctx+0x304/0x310 __nvme_submit_sync_cmd+0x70/0x200 [nvme_core] nvmf_connect_io_queue+0x23e/0x2a0 [nvme_fabrics] nvme_loop_connect_io_queues+0x8d/0xb0 [nvme_loop] nvme_loop_create_ctrl+0x58e/0x7d0 [nvme_loop] nvmf_create_ctrl+0x1d7/0x4d0 [nvme_fabrics] nvmf_dev_write+0xae/0x111 [nvme_fabrics] vfs_write+0x144/0x560 ksys_write+0xb7/0x140 __x64_sys_write+0x42/0x50 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Fixes: 20e4d813 ("blk-mq: simplify queue mapping & schedule with each possisble CPU") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220615210004.1031820-1-bvanassche@acm.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
- 15 Jun, 2022 4 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/song/mdJens Axboe authored
Pull MD fixes from Song. * 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid5-ppl: Fix argument order in bio_alloc_bioset() Revert "md: don't unregister sync_thread with reconfig_mutex held"
-
Logan Gunthorpe authored
bio_alloc_bioset() takes a block device, number of vectors, the OP flags, the GFP mask and the bio set. However when the prototype was changed, the callisite in ppl_do_flush() had the OP flags and the GFP flags reversed. This introduced some sparse error: drivers/md/raid5-ppl.c:632:57: warning: incorrect type in argument 3 (different base types) drivers/md/raid5-ppl.c:632:57: expected unsigned int opf drivers/md/raid5-ppl.c:632:57: got restricted gfp_t [usertype] drivers/md/raid5-ppl.c:633:61: warning: incorrect type in argument 4 (different base types) drivers/md/raid5-ppl.c:633:61: expected restricted gfp_t [usertype] gfp_mask drivers/md/raid5-ppl.c:633:61: got unsigned long long The sparse error introduction may not have been reported correctly by 0day due to other work that was cleaning up other sparse errors in this area. Fixes: 609be106 ("block: pass a block_device and opf to bio_alloc_bioset") Cc: stable@vger.kernel.org # 5.18+ Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
-
Guoqing Jiang authored
The 07reshape5intr test is broke because of below path. md_reap_sync_thread -> mddev_unlock -> md_unregister_thread(&mddev->sync_thread) And md_check_recovery is triggered by, mddev_unlock -> md_wakeup_thread(mddev->thread) then mddev->reshape_position is set to MaxSector in raid5_finish_reshape since MD_RECOVERY_INTR is cleared in md_check_recovery, which means feature_map is not set with MD_FEATURE_RESHAPE_ACTIVE and superblock's reshape_position can't be updated accordingly. Fixes: 8b48ec23 ("md: don't unregister sync_thread with reconfig_mutex held") Reported-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.19 - quirks, quirks, quirks to work around buggy consumer grade devices (Keith Bush, Ning Wang, Stefan Reiter, Rasheed Hsueh) - better kernel messages for devices that need quirking (Keith Bush) - make a kernel message more useful (Thomas Weißschuh)" * tag 'nvme-5.19-2022-06-15' of git://git.infradead.org/nvme: nvme-pci: disable write zeros support on UMIC and Samsung SSDs nvme-pci: avoid the deepest sleep state on ZHITAI TiPro7000 SSDs nvme-pci: sk hynix p31 has bogus namespace ids nvme-pci: smi has bogus namespace ids nvme-pci: phison e12 has bogus namespace ids nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S50 nvme-pci: add trouble shooting steps for timeouts nvme: add bug report info for global duplicate id nvme: add device name to warning in uuid_show()
-
- 13 Jun, 2022 9 commits
-
-
rasheed.hsueh authored
Like commit 5611ec2b ("nvme-pci: prevent SK hynix PC400 from using Write Zeroes command"), UMIS and Samsung has the same issue: [ 6305.633887] blk_update_request: operation not supported error, dev nvme0n1, sector 340812032 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 So also disable Write Zeroes command on UMIS and Samsung. Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Ning Wang authored
When ZHITAI TiPro7000 SSDs entered deepest power state(ps4) it has the same APST sleep problem as Kingston A2000. by chance the system crashes and displays the same dmesg info: https://bugzilla.kernel.org/show_bug.cgi?id=195039#c65 As the Archlinux wiki suggest (enlat + exlat) < 25000 is fine and my testing shows no system crashes ever since. Therefore disabling the deepest power state will fix the APST sleep issue. https://wiki.archlinux.org/title/Solid_state_drive/NVMe This is the APST data from 'nvme id-ctrl /dev/nvme1' NVME Identify Controller: vid : 0x1e49 ssvid : 0x1e49 sn : [...] mn : ZHITAI TiPro7000 1TB fr : ZTA32F3Y [...] ps 0 : mp:3.50W operational enlat:5 exlat:5 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- ps 1 : mp:3.30W operational enlat:50 exlat:100 rrt:1 rrl:1 rwt:1 rwl:1 idle_power:- active_power:- ps 2 : mp:2.80W operational enlat:50 exlat:200 rrt:2 rrl:2 rwt:2 rwl:2 idle_power:- active_power:- ps 3 : mp:0.1500W non-operational enlat:500 exlat:5000 rrt:3 rrl:3 rwt:3 rwl:3 idle_power:- active_power:- ps 4 : mp:0.0200W non-operational enlat:2000 exlat:60000 rrt:4 rrl:4 rwt:4 rwl:4 idle_power:- active_power:- Signed-off-by: Ning Wang <ningwang35@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Keith Busch authored
Add the quirk. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216049Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Keith Busch authored
Add the quirk. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216096Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Keith Busch authored
Add the quirk. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216049Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Stefan Reiter authored
ADATA XPG GAMMIX S50 drives report bogus eui64 values that appear to be the same across drives in one system. Quirk them out so they are not marked as "non globally unique" duplicates. Signed-off-by: Stefan Reiter <stefan@pimaker.at> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Keith Busch authored
Many users have encountered IO timeouts with a CSTS value of 0xffffffff, which indicates a failure to read the register. While there are various potential causes for this observation, faulty NVMe APST has been the culprit quite frequently. Add the recommended troubleshooting steps in the error output when this condition occurs. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Keith Busch authored
The recent global id check is finding poorly implemented devices in the wild. Include relavant device information in the output to help quicken an appropriate quirk patch. Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Thomas Weißschuh authored
This provides more context to users. Old message: [ 00.000000] No UUID available providing old NGUID New message: [ 00.000000] block nvme0n1: No UUID available providing old NGUID Fixes: d934f984 ("nvme: provide UUID value to userspace") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
- 12 Jun, 2022 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Highlights: - Fix hp-wmi regression on HP Omen laptops introduced in 5.18 - Several hardware-id additions - A couple of other tiny fixes" * tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/intel: hid: Add Surface Go to VGBS allow list platform/x86: hp-wmi: Use zero insize parameter only when supported platform/x86: hp-wmi: Resolve WMI query failures on some devices platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support platform/x86: barco-p50-gpio: Add check for platform_driver_register platform/x86/intel: pmc: Support Intel Raptorlake P platform/x86/intel: Fix pmt_crashlog array reference platform/mellanox: Add static in struct declaration. platform/mellanox: Spelling s/platfom/platform/
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fixes from Tejun Heo: "Tetsuo's patch to trigger build warnings if system-wide wq's are flushed along with a TP type update and trivial comment update" * tag 'wq-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Switch to new kerneldoc syntax for named variable macro argument workqueue: Fix type of cpu in trace event workqueue: Wrap flush_workqueue() using a macro
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Make the *.mod build rule portable for POSIX awk - Fix regression of 'make nsdeps' - Make scripts/check-local-export working for older bash versions - Fix scripts/gdb to extract the .config data from vmlinux * tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: scripts/gdb: change kernel config dumping method scripts/check-local-export: avoid 'wait $!' for process substitution scripts/nsdeps: adjust to the format change of *.mod files kbuild: avoid regex RS for POSIX awk
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs client fixes from Steve French: "Three reconnect fixes, all for stable as well. One of these three reconnect fixes does address a problem with multichannel reconnect, but this does not include the additional fix (still being tested) for dynamically detecting multichannel adapter changes which will improve those reconnect scenarios even more" * tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: populate empty hostnames for extra channels cifs: return errors during session setup during reconnects cifs: fix reconnect on smb3 mount types
-
git://git.kernel.org/pub/scm/linux/kernel/git/crng/randomLinus Torvalds authored
Pull random number generator fixes from Jason Donenfeld: - A fix for a 5.19 regression for a case in which early device tree initializes the RNG, which flips a static branch. On most plaforms, jump labels aren't initialized until much later, so this caused splats. On a few mailing list threads, we cooked up easy fixes for arm64, arm32, and risc-v. But then things looked slightly more involved for xtensa, powerpc, arc, and mips. And at that point, when we're patching 7 architectures in a place before the console is even available, it seems like the cost/risk just wasn't worth it. So random.c works around it now by checking the already exported `static_key_initialized` boolean, as though somebody already ran into this issue in the past. I'm not super jazzed about that; it'd be prettier to not have to complicate downstream code. But I suppose it's practical. - A few small code nits and adding a missing __init annotation. - A change to the default config values to use the cpu and bootloader's seeds for initializing the RNG earlier. This brings them into line with what all the distros do (Fedora/RHEL, Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at least), and moreover will now give us test coverage in various test beds that might have caught the above device tree bug earlier. - A change to WireGuard CI's configuration to increase test coverage around the RNG. - A documentation comment fix to unrelated maintainerless CRC code that I was asked to take, I guess because it has to do with polynomials (which the RNG thankfully no longer uses). * tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: wireguard: selftests: use maximum cpu features and allow rng seeding random: remove rng_has_arch_random() random: credit cpu and bootloader seeds by default random: do not use jump labels before they are initialized random: account for arch randomness in bits random: mark bootloader randomness code as __init random: avoid checking crng_ready() twice in random_init() crc-itu-t: fix typo in CRC ITU-T polynomial comment
-
Duke Lee authored
The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be added to dmi_vgbs_allow_list to enable tablet mode when an attached Type Cover is folded back. BugLink: https://github.com/linux-surface/linux-surface/issues/837Signed-off-by: Duke Lee <krnhotwings@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220607213654.5567-1-krnhotwings@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Bedant Patnaik authored
commit be9d73e6 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls") and commit 12b19f14 ("platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug): Attempt to CreateField of length zero (20211217/dsopcode-133) because of the ACPI method HWMC, which unconditionally creates a Field of size (insize*8) bits: CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN) In cases where args->insize = 0, the Field size is 0, resulting in an error. Fix this by using zero insize only if 0x5 error code is returned Tested on Omen 15 AMD (2020) board ID: 8786. Fixes: be9d73e6 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls") Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com> Tested-by: Jorge Lopez <jorge.lopez2@hp.com> Link: https://lore.kernel.org/r/41be46743d21c78741232a47bbb5f1cdbcc3d21e.camel@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Jorge Lopez authored
WMI queries fail on some devices where the ACPI method HWMC unconditionally attempts to create Fields beyond the buffer if the buffer is too small, this breaks essential features such as power profiles: CreateByteField (Arg1, 0x10, D008) CreateByteField (Arg1, 0x11, D009) CreateByteField (Arg1, 0x12, D010) CreateDWordField (Arg1, 0x10, D032) CreateField (Arg1, 0x80, 0x0400, D128) In cases where args->data had zero length, ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit offset/length 128/8 exceeds size of target Buffer (128 bits) (20211217/dsopcode-198) was obtained. ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit offset/length 136/8 exceeds size of target Buffer (136bits) (20211217/dsopcode-198) The original code created a buffer size of 128 bytes regardless if the WMI call required a smaller buffer or not. This particular behavior occurs in older BIOS and reproduced in OMEN laptops. Newer BIOS handles buffer sizes properly and meets the latest specification requirements. This is the reason why testing with a dynamically allocated buffer did not uncover any failures with the test systems at hand. This patch was tested on several OMEN, Elite, and Zbooks. It was confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN Laptop 15-ek0xxx. No problems were reported when testing on several Elite and Zbooks notebooks. Fixes: 4b4967cb ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated") Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220608212923.8585-2-jorge.lopez2@hp.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Jonathan Neuschäfer authored
The syntax without dots is available since commit 43756e34 ("scripts/kernel-doc: Add support for named variable macro arguments"). The same HTML output is produced with and without this patch. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
-
- 11 Jun, 2022 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: "A set of fixes. Most address the new warning we emit at build time when irq chips are not immutable with some additional tweaks to gpio-crystalcove from Andy and a small tweak to gpio-dwapd. - make irq_chip structs immutable in several Diolan and intel drivers to get rid of the new warning we emit when fiddling with irq chips - don't print error messages on probe deferral in gpio-dwapb" * tag 'gpio-fixes-for-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: dwapb: Don't print error on -EPROBE_DEFER gpio: dln2: make irq_chip immutable gpio: sch: make irq_chip immutable gpio: merrifield: make irq_chip immutable gpio: wcove: make irq_chip immutable gpio: crystalcove: Join function declarations and long lines gpio: crystalcove: Use specific type and API for IRQ number gpio: crystalcove: make irq_chip immutable
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Driver fixes and and one core patch. Nine of the driver patches are minor fixes and reworks to lpfc and the rest are trivial and minor fixes elsewhere" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pmcraid: Fix missing resource cleanup in error case scsi: ipr: Fix missing/incorrect resource cleanup in error case scsi: mpt3sas: Fix out-of-bounds compiler warning scsi: lpfc: Update lpfc version to 14.2.0.4 scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion scsi: lpfc: Add more logging of cmd and cqe information for aborted NVMe cmds scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is aborted scsi: lpfc: Address NULL pointer dereference after starget_to_rport() scsi: lpfc: Resolve some cleanup issues following SLI path refactoring scsi: lpfc: Resolve some cleanup issues following abort path refactoring scsi: lpfc: Correct BDE type for XMIT_SEQ64_WQE in lpfc_ct_reject_event() scsi: vmw_pvscsi: Expand vcpuHint to 16 bits scsi: sd: Fix interpretation of VPD B9h length
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fixes from Michael Tsirkin: "Fixes all over the place, most notably fixes for latent bugs in drivers that got exposed by suppressing interrupts before DRIVER_OK, which in turn has been done by 8b4ec69d ("virtio: harden vring IRQ")" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: um: virt-pci: set device ready in probe() vdpa: make get_vq_group and set_group_asid optional virtio: Fix all occurences of the "the the" typo vduse: Fix NULL pointer dereference on sysfs access vringh: Fix loop descriptors check in the indirect cases vdpa/mlx5: clean up indenting in handle_ctrl_vlan() vdpa/mlx5: fix error code for deleting vlan virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed vdpa/mlx5: Fix syntax errors in comments virtio-rng: make device ready before making request
-
Linus Torvalds authored
Merge tag 'loongarch-fixes-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen. "Fix build errors and a stale comment" * tag 'loongarch-fixes-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Remove MIPS comment about cycle counter LoongArch: Fix copy_thread() build errors LoongArch: Fix the !CONFIG_SMP build
-
Linus Torvalds authored
Commit 6c776766 ("iov_iter: Fix iter_xarray_get_pages{,_alloc}()") introduced a problem on some 32-bit architectures (at least arm, xtensa, csky,sparc and mips), that have a 'size_t' that is 'unsigned int'. The reason is that we now do min(nr * PAGE_SIZE - offset, maxsize); where 'nr' and 'offset' and both 'unsigned int', and PAGE_SIZE is 'unsigned long'. As a result, the normal C type rules means that the first argument to 'min()' ends up being 'unsigned long'. In contrast, 'maxsize' is of type 'size_t'. Now, 'size_t' and 'unsigned long' are always the same physical type in the kernel, so you'd think this doesn't matter, and from an actual arithmetic standpoint it doesn't. But on 32-bit architectures 'size_t' is commonly 'unsigned int', even if it could also be 'unsigned long'. In that situation, both are unsigned 32-bit types, but they are not the *same* type. And as a result 'min()' will complain about the distinct types (ignore the "pointer types" part of the error message: that's an artifact of the way we have made 'min()' check types for being the same): lib/iov_iter.c: In function 'iter_xarray_get_pages': include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror] 20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) | ^~ lib/iov_iter.c:1464:16: note: in expansion of macro 'min' 1464 | return min(nr * PAGE_SIZE - offset, maxsize); | ^~~ This was not visible on 64-bit architectures (where we always define 'size_t' to be 'unsigned long'). Force these cases to use 'min_t(size_t, x, y)' to make the type explicit and avoid the issue. [ Nit-picky note: technically 'size_t' doesn't have to match 'unsigned long' arithmetically. We've certainly historically seen environments with 16-bit address spaces and 32-bit 'unsigned long'. Similarly, even in 64-bit modern environments, 'size_t' could be its own type distinct from 'unsigned long', even if it were arithmetically identical. So the above type commentary is only really descriptive of the kernel environment, not some kind of universal truth for the kinds of wild and crazy situations that are allowed by the C standard ] Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/all/YqRyL2sIqQNDfky2@debian/ Cc: Jeff Layton <jlayton@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-