This patch switches EC driver into ACPI_GPE_DISPATCH_RAW_HANDLER mode where
the GPE lock is not held for acpi_ec_gpe_handler() and the ACPICA internal
GPE enabling/disabling/clearing operations are bypassed so that further
improvements are possible with the GPE APIs.

There are 2 strong reasons for deploying raw GPE handler mode in the EC
driver:
1. Some hardware logics can control their interrupts via their own
   registers, so their interrupts can be disabled/enabled/acknowledged
   without using the super IRQ controller provided functions. While there
   is no mean (EC commands) for the EC driver to achieve this.
2. During suspending, the EC driver is still working for a while to
   complete the platform firmware provided functionailities using ec_poll()
   after all GPEs are disabled (see acpi_ec_block_transactions()), which
   means the EC driver will drive the EC GPE out of the GPE core's control.

Without deploying the raw GPE handler mode, we can see many races between
the EC driver and the GPE core due to the above restrictions:
1. There is a race condition due to ACPICA internal GPE
   disabling/clearing/enabling logics in acpi_ev_gpe_dispatch():
     Orignally EC GPE is disabled (EN=0), cleared (STS=0) before invoking a
     GPE handler and re-enabled (EN=1) after invoking a GPE handler in
     acpi_ev_gpe_dispatch(). When re-enabling appears, GPE may be flagged
     (STS=1).
       =================================================================
       (event pending A)
       =================================================================
       acpi_ev_gpe_dispatch()    ec_poll()
         EN=0
         STS=0
         acpi_ec_gpe_handler()
       *****************************************************************
       (event handling A)
           Lock(EC)
           advance_transaction()
             EC_SC read
       =================================================================
       (event pending B)
       =================================================================
             EC_SC handled
           Unlock(EC)
       *****************************************************************
       *****************************************************************
       (event handling B)
                                   Lock(EC)
                                   advance_transaction()
                                     EC_SC read
       =================================================================
       (event pending C)
       =================================================================
                                     EC_SC handled
                                   Unlock(EC)
       *****************************************************************
           EN=1
   This race condition is the root cause of different issues on different
   silicon variations.
   A. Silicon variation A:
      On some platforms, GPE will be triggered due to "writing 1 to EN when
      STS=1". This is because both EN and STS lines are wired to the GPE
      trigger line.
      1. Issue 1:
         We can see no-op acpi_ec_gpe_handler() invoked on such platforms.
         This is because:
         a. event pending B: An event can arrive after ACPICA's GPE
            clearing performed in acpi_ev_gpe_dispatch(), this event may
            fail to be detected by EC_SC read that is performed before its
            arrival;
         b. event handling B: The event can be handled in ec_poll() because
            EC lock is released after acpi_ec_gpe_handler() invocation;
         c. There is no code in ec_poll() to clear STS but the GPE can
            still be triggered by the EN=1 write performed in
            acpi_ev_finish_gpe(), this leads to a no-op EC GPE handler
            invocation;
         d. As no-op GPE handler invocations are counted by the EC driver
            to trigger the command storming conditions, the wrong no-op
            GPE handler invocations thus can easily trigger wrong command
            storming conditions.
         Note 1:
         If we removed GPE disabling/enabling code from
         acpi_ev_gpe_dispatch(), we could still see no-op GPE handlers
         triggered by the event arriving after the GPE clearing and before
         the GPE handling on both silicon variation A and B. This can only
         occur if the CPU is very slow (timing slice between STS=0 write
         and EC_SC read should be short enough before hardware sets another
         GPE indication). Thus this is very rare and is not what we need to
         fix.
   B. Silicon variation B:
      On other platforms, GPE may not be triggered due to "writing 1 to EN
      when STS=1". This is because only STS line is wired to the GPE
      trigger line.
      2. Issue 2:
         We can see GPE loss on such platforms. This is because:
         a. event pending B vs. event handling A: An event can arrive after
            ACPICA's GPE handling performed in acpi_ev_gpe_dispatch(), or
            event pending C vs. event handling B: An event can arrive after
            Linux's GPE handling performed in ec_poll(),
            these events may fail to be detected by EC_SC read that is
            performed before their arrival;
         b. The GPE cannot be triggered by EN=1 write performed in
            acpi_ev_finish_gpe();
         c. If no polling mechanism is implemented in the driver for the
            pending event (for example, SCI_EVT), this event is lost due to
            no GPE being triggered.
         Note 2:
         On most platforms, there might be another rule that GPE may not be
         triggered due to "writing 1 to STS when STS=1 and EN=1".
         Then on silicon variation B, an even worse case is if the issue 2
         event loss happens, further events may never trigger GPE again on
         such platforms due to being blocked by the current STS=1. Unless
         someone clears STS, all events have to be polled.
2. There is a race condition due to lacking in GPE status checking in EC
   driver:
     Originally, GPE status is checked in ACPICA core but not checked in
     the GPE handler. Thus since the status checking and handling is not
     locked, it can be interrupted by another handling path.
       =================================================================
       (event pending A)
       =================================================================
       acpi_ev_gpe_detect()        ec_poll()
         if (EN==1 && STS==1)
       *****************************************************************
       (event handling A)
                                     Lock(EC)
                                     advance_transaction()
                                       EC_SC read
                                       EC_SC handled
                                     Unlock(EC)
       *****************************************************************
         acpi_ev_gpe_dispatch()
           EN=0
           STS=0
           acpi_ec_gpe_handler()
       *****************************************************************
       (event handling B)
             Lock(EC)
             advance_transaction()
               EC_SC read
             Unlock(EC)
       *****************************************************************
      3. Issue 3:
         We can see no-op acpi_ec_gpe_handler() invoked on both silicon
         variation A and B. This is because:
         a. event pending A: An event can arrive to trigger an EC GPE and
            ACPICA checks it and is about to invoke the EC GPE handler;
         b. event handling A: The event can be handled in ec_poll() because
            EC lock is not held after the GPE status checking;
         c. event handling B: Then when the EC GPE handler is invoked, it
            becomes a no-op GPE handler invocation.
         d. As no-op GPE handler invocations are counted by the EC driver
            to trigger the command storming conditions, the wrong no-op
            GPE handler invocations thus can easily trigger wrong command
            storming conditions.
      Note 3:
      This no-op GPE handler invocation is rare because the time between
      the IRQ arrival and the acpi_ec_gpe_handler() invocation is less than
      the timeout value waited in ec_poll(). So most of the no-op GPE
      handler invocations are caused by the reason described in issue 1.
3. There is a race condition due to ACPICA internal GPE clearing logic in
   acpi_enable_gpe():
     During runtime, acpi_enable_gpe() can be invoked by the EC storming
     prevention code. When it is invoked, GPE may be flagged (STS=1).
       =================================================================
       (event pending A)
       =================================================================
       acpi_ev_gpe_dispatch()    acpi_ec_transaction()
         EN=0
         STS=0
         acpi_ec_gpe_handler()
       *****************************************************************
       (event handling A)
           Lock(EC)
           advance_transaction()
             EC_SC read
             EC_SC handled
           Unlock(EC)
       *****************************************************************
         EN=1 ?
                                   Lock(EC)
                                   Unlock(EC)
       =================================================================
       (event pending B)
       =================================================================
                                   acpi_enable_gpe()
                                     STS=0
                                     EN=1
    4. Issue 4:
       We can see GPE loss on both silicon variation A and B platforms.
       This is because:
       a. event pending B: An event can arrive right before ACPICA's GPE
          clearing performed in acpi_enable_gpe();
       b. If the GPE is cleared when GPE is disabled, then EN=1 write in
          acpi_enable_gpe() cannot trigger this GPE;
       c. If no polling mechanism is implemented in the driver for this
          event (for example, SCI_EVT), this event is lost due to no GPE
          being triggered.
       Note 4:
       Currently we don't have this issue, but after we switch the EC
       driver into ACPI_GPE_DISPATCH_RAW_HANDLER mode, we need to take care
       of handling this because the EN=1 write in acpi_ev_gpe_dispatch()
       will be abandoned.

There might be more race issues for the current GPE handler usages. This is
because the EC IRQ's enabling/disabling/checking/clearing/handling
operations should be locked by a single lock that is under the EC driver's
control to achieve the serialization. Which means we need to invoke GPE
APIs with EC driver's lock held and all ACPICA internal GPE operations
related to the GPE handler should be abandoned. Invoking GPE APIs inside of
the EC driver lock and bypassing ACPICA internal GPE operations requires
the ACPI_GPE_DISPATCH_RAW_HANDLER mode where the same lock used by the APIs
are released prior than invoking the handlers. Otherwise, we can see dead
locks due to circular locking dependencies (see Reference below).

This patch then switches the EC driver into the
ACPI_GPE_DISPATCH_RAW_HANDLER mode so that it can perform correct GPE
operations using the GPE APIs:
1. Bypasses EN modifications performed in acpi_ev_gpe_dispatch() by
   using acpi_install_gpe_raw_handler() and invoking all GPE APIs with EC
   spin lock held. This can fix issue 1 as it makes a non frequent GPE
   enabling/disabling environment.
2. Bypasses STS clearing performed in acpi_enable_gpe() by replacing
   acpi_enable_gpe()/acpi_disable_gpe() with acpi_set_gpe(). This can fix
   issue 4. And this can also help to fix issue 1 as it makes a no sudden
   GPE clearing environment when GPE is frequently enabled/disabled.
3. Ensures STS acknowledged before handling by invoking acpi_clear_gpe()
   in advance_transaction(). This can finally fix issue 1 even in a
   frequent GPE enabling/disabling environment. And this can also finally
   fix issue 3 when issue 2 is fixed.
   Note 3:
   GPE clearing is edge triggered W1C, which means we can clear it right
   before handling it. Since all EC GPE indications are handled in
   advance_transaction() by previous commits, we can now move GPE clearing
   into it to implement the correct GPE clearing.
   Note 4:
   We can use acpi_set_gpe() which is not shared GPE safer instead of
   acpi_enable_gpe()/acpi_disable_gpe() because EC GPE is not shared by
   other hardware, which is mentioned in the ACPI specification 5.0, 12.6
   Interrupt Model: "OSPM driver treats this as an edge event (the EC SCI
   cannot be shared)". So we can stop using shared GPE safer APIs
   acpi_enable_gpe()/acpi_disable_gpe() in the EC driver. Otherwise
   cleanups need to be made in acpi_ev_enable_gpe() to bypass the GPE
   clearing logic before keeping acpi_enable_gpe().
This patch also invokes advance_transaction() when GPE is re-enabled in the
task context which:
1. Ensures EN=1 can trigger GPE by checking and handling EC status register
   right after EN=1 writes. This can fix issue 2.

After applying this patch, without frequent GPE enablings considered:
       =================================================================
       (event pending A)
       =================================================================
       acpi_ec_gpe_handler()     ec_poll()
       *****************************************************************
       (event handling A)
         Lock(EC)
           advance_transaction()
             if STS==1
               STS=0
             EC_SC read
       =================================================================
       (event pending B)
       =================================================================
             EC_SC handled
         Unlock(EC)
       *****************************************************************
       *****************************************************************
       (event handling B)
                                   Lock(EC)
                                     advance_transaction()
                                       if STS==1
                                         STS=0
                                       EC_SC read
       =================================================================
       (event pending C)
       =================================================================
                                       EC_SC handled
                                   Unlock(EC)
       *****************************************************************
The event pending for issue 1 (event pending B) can arrive as a next GPE
due to the previous IRQ context STS=0 write. And if it is handled by
ec_poll() (event handling B), as it is also acknowledged by ec_poll(), the
event pending for issue 2 (event pending C) can properly arrive as a next
GPE after the task context STS=0 write. So no GPE will be lost and never
triggered due to GPE clearing performed in the wrong position. And since
all GPE handling is performed after a locked GPE status checking, we can
hardly see no-op GPE handler invocations due to issue 1 and 3. We may still
see no-op GPE handler invocations due to "Note 1", but as it is inevitable,
it needn't be fixed.

After applying this patch, with frequent GPE enablings considered:
       =================================================================
       (event pending A)
       =================================================================
       acpi_ec_gpe_handler()     acpi_ec_transaction()
       *****************************************************************
       (event handling A)
         Lock(EC)
           advance_transaction()
             if STS==1
               STS=0
             EC_SC read
       =================================================================
       (event pending B)
       =================================================================
             EC_SC handled
         Unlock(EC)
       *****************************************************************
       *****************************************************************
       (event handling B)
                                   Lock(EC)
                                     EN=1
                                     if STS==1
                                       advance_transaction()
                                         if STS==1
                                           STS=0
                                         EC_SC read
       =================================================================
       (event pending C)
       =================================================================
                                         EC_SC handled
                                   Unlock(EC)
       *****************************************************************
The event pending for issue 2 can be manually handled by
advance_transaction(). And after the STS=0 write performed in the manual
triggered advance_transaction(), GPE can always arrive. So no GPE will be
lost due to frequent GPE disabling/enabling performed in the driver like
issue 4.
Note 5:
It's ideally when EN=1 write occurred, an IRQ thread should be woken up to
handle the GPE when the GPE was raised. But this requires the IRQ thread to
contain the poller code for all EC GPE indications, while currently some of
the indications are handled in the user tasks. It then is very hard for the
code to determine whether a user task should be invoked or the poller work
item should be scheduled. So we have to invoke advance_transaction()
directly now and it leaves us such a restriction for the GPE re-enabling:
it must be performed in the task context to avoid starving the GPEs.

As a conclusion: we can see the EC GPE is always handled in serial after
deploying the raw GPE handler mode:
  Lock(EC)
  if (STS==1)
    STS=0
  EC_SC read
  EC_SC handled
  Unlock(EC)
The EC driver specific lock is responsible to make the EC GPE handling
processes serialized so that EC can handle its GPE from both IRQ and task
contexts and the next IRQ can be ensured to arrive after this process.

Note 6:
We have many EC_FLAGS_MSI qurik users in the current driver. They all seem
to be suffering from unexpected GPE triggering source lost. And they are
false root caused to a timing issue. Since EC communication protocol has
already flow control defined, timing shouldn't be the root cause, while
this fix might be fixing the root cause of the old bugs.

Link: https://lkml.org/lkml/2014/11/4/974
Link: https://lkml.org/lkml/2014/11/18/316
Link: https://www.spinics.net/lists/linux-acpi/msg54340.htmlSigned-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit da9a83e1a845f2d7332bdbc0632466b2595e5424

For acpi_set_gpe()/acpi_enable_gpe(), our target is to purify them to be APIs
that can be used for various GPE handling models, so we need them to be
pure GPE enabling APIs. GPE enabling/disabling has 2 use cases:
1. Driver may permanently enable/disable GPEs according to the usage
   counts.
   1. When upper layers (the users of the driver) submit requests to the
      driver, it means they care about the underlying hardware. GPE need
      to be enabled for the first request submission and disabled for the
      last request completion.
   2. When the GPE is shared between 2+ silicon logics. GPE need to be
      enabled for either silicon logic's driver and disabled when all of
      the drivers are not started.
   For these cases, acpi_enable_gpe()/acpi_disable_gpe() should be used. When
   the usage count is increased from 0 to 1, the GPE is enabled and it is
   disabled when the usage count is decrased from 1 to 0.
2. Driver may temporarily disables the GPE to enter an GPE polling mode and
   wants to re-enable it later.
   1. Prevent GPE storming: when a driver cannot fully solve the condition
      that triggered the GPE in the GPE context, in order not to trigger
      GPE storm, driver has to disable GPE to switch into the polling mode
      and re-enables it in the non interrupt context after the storming
      condition is cleared.
   2. Meet throughput requirement: some IO drivers need to poll hardware
      again and again until nothing indicated instead of just handling once
      for one interruption, this need to be done in the polling mode or the
      IO flood may prevent the GPE handler from returning.
   3. Meet realtime requirement: in order not to block CPU to handle higher
      realtime prioritized GPEs, lower priority GPEs can be handled in the
      polling mode.
   For these cases, acpi_set_gpe() should be used to switch to/from the
   polling mode.

This patch adds unconditional GPE enabling support into acpi_set_gpe() so
that this API can be used by the drivers to switch back from the GPE
polling mode unconditionally.

Originally this function includes GPE clearing logic in it.
First, the GPE clearing is typically used in the GPE handling code to:
1. Acknowledge the GPE when we know there is an edge triggered GPE raised
   and is about to handle it, otherwise the unexpected clearing may lead to
   a GPE loss;
2. Issue actions after we have handled a level triggered GPE, otherwise
   the unexpected clearing may trigger unwanted OSPM actions to the
   hardware (for example, clocking in out-dated write FIFO data).
Thus the GPE clearing is not suitable to be used in the GPE enabling APIs.
Second, the combination of acknowledging and enabling may also not be
expected by the hardware drivers. For GPE clearing, we have a seperate API
acpi_clear_gpe(). There are cases drivers do want the 2 operations to be
split. So splitting these 2 operations could facilitates drivers the
maximum possibilities to achieve success. For a combined one, we already
have acpi_finish_gpe() ready to be invoked.

Given the fact that drivers should complete all outstanding requests before
putting themselves into the sleep states, as this API is executed for
outstanding requests, it should also have nothing to do with the
"RUN"/"WAKE" distinguishing. That's why the acpi_set_gpe(ACPI_GPE_ENABLE)
should not be implemented by acpi_hw_low_set_gpe(ACPI_GPE_CONDITIONAL_ENABLE).

This patch thus converts acpi_set_gpe(ACPI_GPE_ENABLE) into
acpi_hw_low_set_gpe(ACPI_GPE_ENABLE) to achieve a seperate GPE enabling API.
Drivers then are encouraged to use this API when they need to switch
to/from the GPE polling mode.

Note that the acpi_set_gpe()/acpi_finish_gpe() should be first introduced to
Linux using a divergence reduction patch before sending a linuxized version
of this patch. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/da9a83e1Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This can help to reduce source code differences between Linux and ACPICA
upstream. Further driver cleanups also require these APIs to eliminate GPE
storms.
1. acpi_set_gpe(): An API that driver should invoke in the case it wants
                   to disable/enable IRQ without honoring the reference
                   count implemented in the acpi_disable_gpe() and
                   acpi_enable_gpe(). Note that this API should only be
                   invoked inside a acpi_enable_gpe()/acpi_disable_gpe()
                   pair.
2. acpi_finish_gpe(): Drivers returned ACPI_REENABLE_GPE unset from the
                      GPE handler should use this API instead of
                      invoking acpi_set_gpe()/acpi_enable_gpe() to
                      re-enable the GPE.
The GPE APIs can be invoked inside of a GPE handler or in the task context
with a driver provided lock held. This driver provided lock is safe to be
held in the GPE handler by the driver.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 199cad16530a45aea2bec98e528866e20c5927e1

Since whether the GPE should be disabled/enabled/cleared should only be
determined by the GPE driver's state machine:
1. GPE should be disabled if the driver wants to switch to the GPE polling
   mode when a GPE storm condition is indicated and should be enabled if
   the driver wants to switch back to the GPE interrupt mode when all of
   the storm conditions are cleared. The conditions should be protected by
   the driver's specific lock.
2. GPE should be enabled if the driver has accepted more than one request
   and should be disabled if the driver has completed all of the requests.
   The request count should be protected by the driver's specific lock.
3. GPE should be cleared either when the driver is about to handle an edge
   triggered GPE or when the driver has completed to handle a level
   triggered GPE. The handling code should be protected by the driver's
   specific lock.
Thus the GPE enabling/disabling/clearing operations are likely to be
performed with the driver's specific lock held while we currently cannot do
this. This is because:
1. We have the acpi_gbl_gpe_lock held before invoking the GPE driver's
   handler. Driver's specific lock is likely to be held inside of the
   handler, thus we can see some dead lock issues due to the reversed
   locking order or recursive locking. In order to solve such dead lock
   issues, we need to unlock the acpi_gbl_gpe_lock before invoking the
   handler. BZ 1100.
2. Since GPE disabling/enabling/clearing should be determined by the GPE
   driver's state machine, we shouldn't perform such operations inside of
   ACPICA for a GPE handler to mess up the driver's state machine. BZ 1101.

Originally this patch includes a logic to flush GPE handlers, it is dropped
due to the following reasons:
1. This is a different issue;
2. Linux OSL has fixed this by flushing SCI in acpi_os_wait_events_complete().
We will pick up this topic when the Linux OSL fix turns out to be not
sufficient.

Note that currently the internal operations and the acpi_gbl_gpe_lock are
also used by ACPI_GPE_DISPATCH_METHOD and ACPI_GPE_DISPATCH_NOTIFY. In
order not to introduce regressions, we add one
ACPI_GPE_DISPATCH_RAW_HANDLER type to be distiguished from
ACPI_GPE_DISPATCH_HANDLER. For which the acpi_gbl_gpe_lock is unlocked before
invoking the GPE handler and the internal enabling/disabling operations are
bypassed to allow drivers to perform them at a proper position using the
GPE APIs and ACPI_GPE_DISPATCH_RAW_HANDLER users should invoke acpi_set_gpe()
instead of acpi_enable_gpe()/acpi_disable_gpe() to bypass the internal GPE
clearing code in acpi_enable_gpe(). Lv Zheng.

Known issues:
1. Edge-triggered GPE lost for frequent enablings
   On some buggy silicon platforms, GPE enable line may not be directly
   wired to the GPE trigger line. In that case, when GPE enabling is
   frequently performed for edge-triggered GPEs, GPE status may stay set
   without being triggered.
   This patch may maginify this problem as it allows GPE enabling to be
   parallel performed during the process the GPEs are handled.
   This is an existing issue, because:
   1. For task context:
      Current ACPI_GPE_DISPATCH_METHOD practices have proven that this
      isn't a real issue - we can re-enable edge-triggered GPE in a work
      queue where the GPE status bit might already be set.
   2. For IRQ context:
      This can even happen when the GPE enabling occurs before returning
      from the GPE handler and after unlocking the GPE lock.
   Thus currently no code is included to protect this.

Link: https://github.com/acpica/acpica/commit/199cad16Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit e06b1624b02dc8317d144e9a6fe9d684c5fa2f90

Version 20150204.

Link: https://github.com/acpica/acpica/commit/e06b1624Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 8990e73ab2aa15d6a0068b860ab54feff25bee36

Link: https://github.com/acpica/acpica/commit/8990e73aSigned-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 490ec7f7839bf7ee5e8710a34d1d1a78d54a49b6

In function acpi_hw_low_set_gpe(), cast enable_mask to u8 before
storing. The mask was read from a 32 bit register but is an 8 bit
value. Fixes Visual Studio compiler warning.

Link: https://github.com/acpica/acpica/commit/490ec7f7Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 7926d5ca9452c87f866938dcea8f12e1efb58f89

There is an issue in acpi_install_gpe_handler() and acpi_remove_gpe_handler().
The code to obtain the GPE dispatcher type from the Handler->original_flags
is wrong:
    if (((Handler->original_flags & ACPI_GPE_DISPATCH_METHOD) ||
         (Handler->original_flags & ACPI_GPE_DISPATCH_NOTIFY)) &&
ACPI_GPE_DISPATCH_NOTIFY is 0x03 and ACPI_GPE_DISPATCH_METHOD is 0x02, thus
this statement is TRUE for the following dispatcher types:
    0x01 (ACPI_GPE_DISPATCH_HANDLER): not expected
    0x02 (ACPI_GPE_DISPATCH_METHOD): expected
    0x03 (ACPI_GPE_DISPATCH_NOTIFY): expected

There is no functional issue due to this because Handler->original_flags is
only set in acpi_install_gpe_handler(), and an earlier checker has excluded
the ACPI_GPE_DISPATCH_HANDLER:
    if ((gpe_event_info->Flags & ACPI_GPE_DISPATCH_MASK) ==
            ACPI_GPE_DISPATCH_HANDLER)
    {
        Status = AE_ALREADY_EXISTS;
        goto free_and_exit;
    }
    ...
    Handler->original_flags = (u8) (gpe_event_info->Flags &
        (ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK));

We need to clean this up before modifying the GPE dispatcher type values.

In order to prevent such issue from happening in the future, this patch
introduces ACPI_GPE_DISPATCH_TYPE() macro to be used to obtain the GPE
dispatcher types. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/7926d5caSigned-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA: Events: Cleanup to move acpi_gbl_global_event_handler invocation out of acpi_ev_gpe_dispatch()

ACPICA commit 04f25acdd4f655ae33f83de789bb5f4b7790171c

This patch follows acpi_ev_fixed_event_detect(), which invokes
acpi_gbl_global_event_handler instead of invoking it in
acpi_ev_fixed_event_dispatch(), moves acpi_gbl_global_event_handler from
acpi_ev_gpe_dispatch() to acpi_ev_gpe_detect(). This makes further cleanups
around acpi_ev_gpe_dispatch() simpler. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/04f25acdSigned-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit b2b18bb38045404e253f10787b8a4ae6e94cdee6

This patch prevents acpi_remove_gpe_handler() from leaking the stale
gpe_event_info->Dispatch.Handler to the caller to avoid possible NULL pointer
references. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/b2b18bb3Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 8e21180050270897499652e922c6a41b8eb388b6

Recent changes to acpi_ev_asynch_execute_gpe_method left Status
variable uninitialized before use. Initialize to AE_OK.

Link: https://github.com/acpica/acpica/commit/8e211800Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 8823b44ff53859ab24ecfcfd3fba8cc56b17d223

Currently we rely on the logic that GPE blocks will never be deleted,
otherwise we can be broken by the race between acpi_ev_create_gpe_block(),
acpi_ev_delete_gpe_block() and acpi_ev_gpe_detect().
On the other hand, if we want to protect GPE block creation/deletion, we
need to use a different synchronization facility to protect the period
between acpi_ev_gpe_dispatch() and acpi_ev_asynch_enable_gpe(). Which leaves us
no choice but abandoning the ACPI_MTX_EVENTS used during this period.

This patch removes ACPI_MTX_EVENTS used during this period and the
acpi_ev_valid_gpe_event() to reflect current restriction. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/8823b44fSigned-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit ca10324788bc9bdaf47fa9e51145129c1299144d

This patch deletes a sanity check from acpi_ev_enable_gpe().

This kind of check is already done in
acpi_enable_gpe()/acpi_remove_gpe_handler()/acpi_update_all_gpes() before invoking
acpi_ev_enable_gpe():
1. acpi_enable_gpe(): same check (skip if DISPATCH_NONE) is now implemented.
2. acpi_remove_gpe_handler(): a more strict check (skip if !DISPATCH_HANDLER)
                           is implemented.
3. acpi_update_all_gpes(): a more strict check (skip if DISPATCH_NONE ||
                        DISPATCH_HANDLER || CAN_WAKE)
4. acpi_set_gpe(): since it is invoked by the OSPM driver where the GPE
                 handler is known to be available, such check isn't needed.
So we can simply remove this duplicated check from acpi_ev_enable_gpe().
Lv Zheng.

Link: https://github.com/acpica/acpica/commit/ca103247Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This is a back port result of the Linux commit:
  Commit c50f13c6
  Subject: ACPICA: Save current masks of enabled GPEs after enable register writes

Besides of the indent divergences, only a missing prototype added due to
the ACPICA internal coding style.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

struct acpi_resource_address and struct acpi_resource_extended_address64 share substracts
just at different offsets. To unify the parsing functions, OSPMs like Linux
need a new ACPI_ADDRESS64_ATTRIBUTE as their substructs, so they can
extract the shared data.

This patch also synchronizes the structure changes to the Linux kernel.
The usages are searched by matching the following keywords:
1. acpi_resource_address
2. acpi_resource_extended_address
3. ACPI_RESOURCE_TYPE_ADDRESS
4. ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS
And we found and fixed the usages in the following files:
 arch/ia64/kernel/acpi-ext.c
 arch/ia64/pci/pci.c
 arch/x86/pci/acpi.c
 arch/x86/pci/mmconfig-shared.c
 drivers/xen/xen-acpi-memhotplug.c
 drivers/acpi/acpi_memhotplug.c
 drivers/acpi/pci_root.c
 drivers/acpi/resource.c
 drivers/char/hpet.c
 drivers/pnp/pnpacpi/rsparser.c
 drivers/hv/vmbus_drv.c

Build tests are passed with defconfig/allnoconfig/allyesconfig and
defconfig+CONFIG_ACPI=n.
Original-by: Thomas Gleixner <tglx@linutronix.de>
Original-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA has implemented acpi_unload_parent_table() which can exactly replace
the acpi_get_id()/acpi_unload_table_id() implemented in Linux kernel.  The
acpi_unload_parent_table() has been unit tested in ACPICA simulation
environment.

This patch can also help to reduce the source code differences between
Linux and ACPICA.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The QR_EC related code pieces have redundants, this patch merges them into
acpi_ec_query() which invokes acpi_ec_transaction() where EC mutex and the
global lock are already held. After doing so, query handler traversal still
need to be locked by EC mutex after invoking acpi_ec_transaction().

Note that EC event handling is sequential. We fetch one event from firmware
event queue and process it until 0x00 or error returned. So we don't need
to hold mutex for whole acpi_ec_clear() process to determine whether we
should continue to drain. And for the same reason, we don't need to hold
mutex for the whole procedure from the QR_EC transaction to the query
handler traversal.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch fixes 2 issues related to the draining behavior. But it doesn't
implement the draining support, it only cleans up code so that further
draining support is possible.

The draining behavior is expected by some platforms (for example, Samsung)
where SCI_EVT is set only once for a set of events and might be cleared for
the very first QR_EC command issued after SCI_EVT is set. EC firmware on
such platforms will return 0x00 to indicate "no outstanding event". Thus
after seeing an SCI_EVT indication, EC driver need to fetch events until
0x00 returned (see acpi_ec_clear()).

Issue 1 - acpi_ec_submit_query():
It's reported on Samsung laptops that SCI_EVT isn't checked when the
transactions are advanced in ec_poll(), which leads to SCI_EVT triggering
source lost:
 If no EC GPE IRQs are arrived after that, EC driver cannot detect this
 event and handle it.
See comment 244/247 for kernel bugzilla 44161.
This patch fixes this issue by moving SCI_EVT checks into
advance_transaction(). So that SCI_EVT is checked each time we are going to
handle the EC firmware indications. And this check will happen for both IRQ
context and task context.
Since after doing that, SCI_EVT is also checked after completing a
transaction, ec_check_sci() and ec_check_sci_sync() can be removed.

Issue 2 - acpi_ec_complete_query():
We expect to clear EC_FLAGS_QUERY_PENDING to allow queuing another draining
QR_EC after writing a QR_EC command and before reading the event. After
reading the event, SCI_EVT might be cleared by the firmware, thus it may
not be possible to queue such a draining QR_EC at that time.
But putting the EC_FLAGS_QUERY_PENDING clearing code after
start_transaction() is wrong as there are chances that after
start_transaction(), QR_EC can fail to be sent. If this happens,
EC_FLAG_QUERY_PENDING will be cleared earlier. As a consequence, the
draining QR_EC will also be queued earlier than expected.
This patch also moves this code into advance_transaction() where QR_EC is
just sent (ACPI_EC_COMMAND_POLL flagged) to fix this issue.

Notes:
1. After introducing the 2 SCI_EVT related handlings into
   advance_transaction(), a next QR_EC can be queued right after writing
   the current QR_EC command and before reading the event. But this still
   hasn't implemented the draining behavior as the draining support
   requires:
     If a previous returned event value isn't 0x00, a draining QR_EC need
     to be issued even when SCI_EVT isn't set.
2. In this patch, acpi_os_execute() is also converted into a seperate work
   item to avoid invoking kmalloc() in the atomic context. We can do this
   because of the previous global lock fix.
3. Originally, EC_FLAGS_EVENT_PENDING is also used to avoid queuing up
   multiple work items (created by acpi_os_execute()), this can be covered
   by only using a single work item. But this patch still keeps this flag
   as there are different usages in the driver initialization steps relying
   on this flag.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161Reported-by: Kieran Clancy <clancy.kieran@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently QR_EC is queued up on CPU 0 to be safe with SMM because there is
no global lock held for acpi_ec_gpe_query(). As we are about to move QR_EC
to a non CPU 0 bound work queue to avoid invoking kmalloc() in
advance_transaction(), we have to acquire global lock for the new QR_EC
work item to avoid regressions.

Known issue:
1. Global lock for acpi_ec_clear().
   This is an existing issue that acpi_ec_clear() which invokes
   acpi_ec_sync_query() also suffers from the same issue. But this patch's
   target is only the code to invoke acpi_ec_sync_query() in a CPU 0 bound
   work queue item, and the acpi_ec_clear() can be automatically fixed by
   further patch that merges the redundant code, so it is left unchanged.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The returning value of acpi_os_execute() is erroneously handled as errno.
This patch corrects it by returning EBUSY to indicate the work queue item
creation failure.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch adds reference counting for query handlers in order to eliminate
kmalloc()/kfree() usage.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Ortwin Glück <odi@odi.ch>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch moves transaction wakeup code into advance_transaction().
No functional changes.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

acpi_tb_delete_namespace_by_owner() expects ACPI_MTX_INTERPRETER to be
taken. This fixes the following issue:

ACPI Error: Mutex [0x0] is not acquired, cannot release (20141107/utmutex-322)
Call Trace:
  [<ffffffff81b0bd28>] dump_stack+0x4f/0x7b
  [<ffffffff81546bfc>] acpi_ut_release_mutex+0x47/0x67
  [<ffffffff81542cf1>] acpi_tb_delete_namespace_by_owner+0x57/0x8d
  [<ffffffff81543ef1>] acpi_unload_table_id+0x3a/0x5e
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull ARM SoC fixes from Olof Johansson:
 "We've been sitting on our fixes branch for a while, so this batch is
  unfortunately on the large side.

  A lot of these are tweaks and fixes to device trees, fixing various
  bugs around clocks, reg ranges, etc.  There's also a few defconfig
  updates (which are on the late side, no more of those).

  All in all the diffstat is bigger than ideal at this time, but nothing
  in here seems particularly risky"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  reset: sunxi: fix spinlock initialization
  ARM: dts: disable CCI on exynos5420 based arndale-octa
  drivers: bus: check cci device tree node status
  ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288
  ARM: nomadik: fix up leftover device tree pins
  ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
  ARM: at91/dt: sam9263: Add missing clocks to lcdc node
  ARM: at91: sama5d3: dt: correct the sound route
  ARM: at91/dt: sama5d4: fix the timer reg length
  ARM: exynos_defconfig: Enable LM90 driver
  ARM: exynos_defconfig: Enable options for display panel support
  arm: dts: Use pmu_system_controller phandle for dp phy
  ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
  ARM: dts: berlin: correct BG2Q's SM GPIO location.
  ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT
  ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host
  ARM: dts: Revert disabling of smc91x for n900
  ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling
  ARM: dts: dra7-evm: fix qspi device tree partition size
  ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
  ...

Pull clock driver fixes from Mike Turquette:
 "Small number of fixes for clock drivers and a single null pointer
  dereference fix in the framework core code.

  The driver fixes vary from fixing section mismatch warnings to
  preventing machines from hanging (and preventing developers from
  crying)"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: fix possible null pointer dereference
  Revert "clk: ppc-corenet: Fix Section mismatch warning"
  clk: rockchip: fix deadlock possibility in cpuclk
  clk: berlin: bg2q: remove non-exist "smemc" gate clock
  clk: at91: keep slow clk enabled to prevent system hang
  clk: rockchip: fix rk3288 cpuclk core dividers
  clk: rockchip: fix rk3066 pll lock bit location
  clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri
  clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host

Pull SCSI fixes from James Bottomley:
 "This is one fix for a Multiqueue sleeping in invalid context problem
  and a MAINTAINER file update for Qlogic"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ->queue_rq can't sleep
  MAINTAINERS: Update maintainer list for qla4xxx

The commit 646cafc6 (clk: Change clk_ops->determine_rate to
return a clk_hw as the best parent) opens a possibility for
null pointer dereference, fix this.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

This reverts commit da788acb.

That commit tried to fix the section mismatch warning by moving the
ppc_corenet_clk_driver struct to init section. This is definitely wrong
because the kernel would free the memories occupied by this struct
after boot while this driver is still registered in the driver core.
The kernel would panic when accessing this driver struct.

Cc: stable@vger.kernel.org # 3.17
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

Lockdep reported a possible deadlock between the cpuclk lock and for example
the i2c driver.

       CPU0                    CPU1
       ----                    ----
  lock(clk_lock);
                               local_irq_disable();
                               lock(&(&i2c->lock)->rlock);
                               lock(clk_lock);
  <Interrupt>
    lock(&(&i2c->lock)->rlock);

 *** DEADLOCK ***

The generic clock-types of the core ccf already use spin_lock_irqsave when
touching clock registers, so do the same for the cpuclk.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: removed initialization of "flags"]

Pull dmaengine fixes from Vinod Koul:
 "Two patches, the first by Andy to fix dw dmac runtime pm and second
  one by me to fix the dmaengine headers in MAINTAINERS"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dw: balance PM runtime calls
  MAINTAINERS: dmaengine: fix the header file for dmaengine

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, but also two PMU driver fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools powerpc: Use dwfl_report_elf() instead of offline.
  perf tools: Fix segfault for symbol annotation on TUI
  perf test: Fix dwarf unwind using libunwind.
  perf tools: Avoid build splat for syscall numbers with uclibc
  perf tools: Elide strlcpy warning with uclibc
  perf tools: Fix statfs.f_type data type mismatch build error with uclibc
  tools: Remove bitops/hweight usage of bits in tools/perf
  perf machine: Fix __machine__findnew_thread() error path
  perf tools: Fix building error in x86_64 when dwarf unwind is on
  perf probe: Propagate error code when write(2) failed
  perf/x86/intel: Fix bug for "cycles:p" and "cycles:pp" on SLM
  perf/rapl: Fix sysfs_show() initialization for RAPL PMU

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  - Fix segfault when using both the map symtab viewer and annotation
    in the TUI (Namhyung Kim).

  - uClibc build fixes (Alexey Brodkin, Vineet Gupta).

  - bitops/hweight were moved from tools/perf/ too tools/include, move
    some leftovers (Arnaldo Carvalho de Melo)

  - Fix dwarf unwind x86_64 build error (Namhyung Kim)

  - Fix __machine__findnew_thread() error path (Namhyung Kim)

  - Propagate error code when write(2) failed in 'perf probe' (Namhyung Kim)

  - Use dwfl_report_elf() instead of offline in powerpc bits to
    properly handle non prelinked DSOs (Sukadev Bhattiprolu).

  - Fix dwarf unwind using libunwind in 'perf test' (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

Merge "Samsung fixes for v3.19" from Kukjin Kim:

Samsung fixes for v3.19
- exynos_defconfig: enable LM90 driver and display panel support
   - HWMON
   - SENSORS_LM90
   - Direct Rendering Manager (DRM)
   - DRM bridge registration and lookup framework
   - Parade ps8622/ps8625 eDP/LVDS bridge
   - NXP ptn3460 eDP/LVDS bridge
   - Exynos Fully Interactive Mobile Display controller (FIMD)
   - Panel registration and lookup framework
   - Simple panels
   - Backlight & LCD device support

- use pmu_system_controller phandle for dp phy
  : DP PHY requires pmu_system_controller to handle PMU reg. now

* tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: exynos_defconfig: Enable LM90 driver
  ARM: exynos_defconfig: Enable options for display panel support
  arm: dts: Use pmu_system_controller phandle for dp phy
Signed-off-by: Olof Johansson <olof@lixom.net>

Call spin_lock_init() before the spinlocks are used, both in early init
and probe functions preventing a lockdep splat.

I have been observing lockdep complaining [1] during boot on my a80 optimus [2]
when CONFIG_PROVE_LOCKING has been enabled. This patch resolves the splat,
and has been tested on a few other sunxi platforms without issue.

[1] http://storage.kernelci.org/next/next-20150107/arm-multi_v7_defconfig+CONFIG_PROVE_LOCKING=y/lab-tbaker/boot-sun9i-a80-optimus.html
[2] http://kernelci.org/boot/?a80-optimusSigned-off-by: Tyler Baker <tyler.baker@linaro.org>
Cc: <stable@vger.kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Merge "Renesas ARM Based SoC Fixes for v3.19" from Simon Horman:

Renesas ARM Based SoC Fixes for v3.19

This pull request is based on the last round of SoC updates for v3.19,
Fourth Round of Renesas ARM Based SoC Updates for v3.19, tagged as
renesas-soc3-for-v3.19, merged into your next/soc branch and included in
v3.19-rc1.

- ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds

  Set .control_parent for all irqpin instances for sh73a0 SoC when booting
  using legacy C.

- ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds

  This fixes a long standing problem which has been present since
  the sh73a0 SoC started using the INTC External IRQ pin driver.

  The patch that introduced the problem is 341eb546 ("ARM:
  shmobile: INTC External IRQ pin driver on sh73a0") which was included
  in v3.10.

* tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
  ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds

The arndale-octa board was giving "imprecise external aborts" during
boot-up with MCPM enabled. CCI enablement of the boot cluster was found
to be the cause of these aborts (possibly because the secure f/w was not
allowing it). Hence, disable CCI for the arndale-octa board.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The arm-cci driver completes the probe sequence even if the cci node is
marked as disabled. Add a check in the driver to honour the cci status
in the device tree.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes

Merge "at91: fixes for 3.19 #1 (ter)" from Nicolas Ferre:

First fixes batch for AT91 on 3.19:
- fix some DT entries
- correct clock entry for the at91sam9263 LCD
- add a phy_fixup for Eth1 on sama5d4

* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
  ARM: at91/dt: sam9263: Add missing clocks to lcdc node
  ARM: at91: sama5d3: dt: correct the sound route
  ARM: at91/dt: sama5d4: fix the timer reg length
Signed-off-by: Olof Johansson <olof@lixom.net>