- 06 Apr, 2017 2 commits
-
-
Daniel Vetter authored
Just the groundwork to prepare for adding the acquire cxt parameter to the ->gamma_set hook. Again we need a temporary hack to fill out mode_config.acquire_ctx until the atomic helpers are switched over. Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-12-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
It just doesn't work. It probably stopped working way, way before that (e.g. i915 grabbed random mutexes all over in modeset code at least since gen6), but with atomic and all the ww_mutex stuff it's indeed hopeless. Remove ->mode_set_base_atomic from the 2 atomic drivers (i915 and nouveau) that still had one (both had dummy implementations already anyway), and shunt atomic drivers in the helpers debug_enter/leave functions. I'll leave the code in for radeon and amdgpu, but I think as soon as amdgpu is atomic we should think about just ripping it out. Only having it around for radeon and pre-nv50 is rather pointless. This would also allow us to nuke all that code from fbdev. Funny part is that _all_ kms drivers set this hook, despite that no one else provides the required ->mode_set_base_atomic implementation. The reason I'm jumping on this is that I want to wire up a full acquire ctx for the benefit of atomic drivers, everywhere. And the debug_enter/leave implementations call ->gamma_set. And there's just no way ever we can create an acquire_ctx in the nmi context of kgdb. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
-
- 05 Apr, 2017 8 commits
-
-
Daniel Vetter authored
We do set DRIVER_ATOMIC now. Note that the comment is outdated, the property paths switched over to checking drm_drv_uses_atomic_modeset() a while ago. Which means this can't even break if we revert DRIVER_ATOMIC again. v2: Add note that this is even safer (Maarten). Reviewed-by:
-
Daniel Vetter authored
We don't call into drivers at all here, this is enough. Also, we can reduce the critical section a bit to simplify the code. crtc->gamma_size is set up once at driver load and then invariant, so also doesn't need any protection. Reviewed-by:
-
Daniel Vetter authored
Properties, i.e. the struct drm_property specifying the type and value range of a property, not the instantiation on a given object, are invariant over the lifetime of a driver. Hence no locking at all is needed, we can just remove it. While at it give the function some love and simplify it, to get it under the 80 char limit: - Straighten the loops to reduce the nesting. - use u64_to_user_ptr casting helper - use put_user for fixed u64 copies. Note there's a small behavioural change in that we now copy parts of the values to userspace if the arrays are a bit too small. Since userspace will immediately retry anyway, this doesn't matter. Reviewed-by:
-
Daniel Vetter authored
If we push the locks down we don't have to take them all at the same time. Aside: Making dump_info fully safe should be fairly simple, if we protect the ->state pointers with rcu. Simply putting a synchronize_rcu() into the drm_atomic_state free function should be all that's roughly needed. Well except we shouldn't block in there, so better to put that into a work_struct. But I've not set out to fix that little issue. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by:
-
Daniel Vetter authored
Atomic code rely shouldn't rely on the magic hidden acquire context. v2: Remove unused config local var (gcc). Reviewed-by:
-
Daniel Vetter authored
With all the callers of drm_modeset_lock_crtc gone, and all the places it was formerly used properly wiring the acquire ctx through, we can remove this. The only hidden context magic we still have is now the global one. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
-
Daniel Vetter authored
The last user, the cursor ioctl, can just open-code this too. We simply have to move the acquire ctx dance from the universal function up into the top-level ioctl handler. Reviewed-by:
-
Daniel Vetter authored
This is only for legacy paths that need to grab the crtc/plane lock combo. If you want to lock a crtc, just use drm_modeset_lock(). Reviewed-by:
-
- 04 Apr, 2017 26 commits
-
-
Ander Conselvan de Oliveira authored
With the atomic API, it is possible that a single commit affects multiple crtcs. If the user requests an event with that commit, one event will be sent for each CRTC, but it is not possible to distinguish which crtc an event is for in user space. To solve this, the reserved field in struct drm_vblank_event is repurposed to include the crtc_id which the event is for. The DRM_CAP_CRTC_IN_VBLANK_EVENT is added to allow userspace to query if the crtc field will be set properly. [daniels: Rebased, using Maarten's forward-port.] Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
Daniel Stone <daniels@collabora.com> Cc: Maarten Lankhorst <maarten.lankhorst@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170404165221.28240-2-daniels@collabora.com
-
Daniel Vetter authored
Drive-by cleanup. Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Daniel Vetter authored
Also unify/merge with the existing stuff. I was a bit torn where to put this, but in the end I decided to put all the ioctl/sysfs/debugfs stuff into drm-uapi.rst. That means we have a bit a split with the other uapi related stuff used internally, like drm_file.[hc], but I think overall this makes more sense. If it's too confusing we can always add more cross-links to make it more discoverable. But the auto-sprinkling of links kernel-doc already does seems sufficient. Also for prettier docs and more cross-links, switch the internal defines over to an enum, as usual. v2: Update kerneldoc fro drm_compat_ioctl too (caught by 0day), plus a bit more drive-by polish. v3: Fix typo, spotted by xerpi on irc (Sergi). v4: Add missing space in comment (Neil). Cc: Sergi Granell <xerpi.g.12@gmail.com> Reviewed-by:
-
Daniel Vetter authored
- remove docs for internal func, doesn't add value - add short overview snippet instead explaining that drivers don't have to bother themselves with reg/unreg concerns - drop the ttm comment about drmP.h, drmP.h is disappearing ... Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170404095304.17599-2-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Just drive-by, but we have gsoc running so better to update it now. Great news is that two entries can be removed because essentially all done. v2: Keep a bunch of the todos, Gabriel is working on them. Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by:
-
John Keeping authored
This reset is required in order to fully reset the internal state of the MIPI controller. Signed-off-by:
John Keeping <john@metanate.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303113945.3bd2cbd9.john@metanate.com
-
Neil Armstrong authored
This patch adds the dw-hdmi bindings and RST kerneldoc to maintained files. Acked-by:
-
Neil Armstrong authored
Acked-by:
-
Neil Armstrong authored
Acked-by:
-
Neil Armstrong authored
This binding describes the Amlogic Meson specific extension to the Synopsys Designware HDMI Controller. Acked-by:
-
Neil Armstrong authored
The Amlogic Meson GXBB/GXL/GXM SoCs embeds a Synopsys DesignWare HDMI TX Controller with a custom Bridge + PHY around the Controller. This driver makes uses of all the custom PHY plat data callbacks and enables the compatible HDMI modes to be configured as a drm_encoder instance. Acked-by:
-
Neil Armstrong authored
This patch adds support for the supported HDMI Venc modes and add the VPP mux value to switch to ENCP encoder. Acked-by:
-
Neil Armstrong authored
This patchs adds support for the supported HDMI modes clocks frequencies. Acked-by:
-
Neil Armstrong authored
Since this is managed now by the components code, if CVBS is not available and HDMI neither, the drm driver won't bind anyway. Acked-by:
-
Neil Armstrong authored
This patch adds support for optional components connected through the Device Tree endpoints scheme. Acked-by:
-
Neil Armstrong authored
Add missing VPU HDMI register. Acked-by:
-
Neil Armstrong authored
Clean the crtc_enable by using the proper crtc_state instead of the state of the primary plane state data. Also fix the dependency to commit the plane changes even if enable is called after the flush. Acked-by:
-
Neil Armstrong authored
The HDMI TX controller support HPD and RXSENSE signaling from the PHY via it's STAT0 PHY interface, but some vendor PHYs can manage these signals independently from the controller, thus these STAT0 handling should be moved to PHY specific operations and become optional. The existing STAT0 HPD and RXSENSE handling code is refactored into a supplementaty set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Reviewed-by:
Jose Abreu <joabreu@synopsys.com> Reviewed-by:
Archit Taneja <architt@codeaurora.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Neil Armstrong authored
This patch adds a new DRM documentation entry and links to the input format table added in the dw_hdmi header. Reviewed-by:
-
Neil Armstrong authored
Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by:
-
Laurent Pinchart authored
In preparation for adding PHY operations to handle RX SENSE and HPD, group all the PHY interrupt setup code in a single location and extract it to a separate function. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
-
Sean Paul authored
Merge tag 'topic/synopsys-media-formats-2017-04-03' of git://anongit.freedesktop.org/git/drm-misc into drm-misc-next Media formats for synopsys HDMI TX Controller Signed-off-by:
-
Sean Paul authored
Backmerging in order to pull vmwgfx [1] and the new synopsys media format [2] reqs. [1]- http://patchwork.freedesktop.org/patch/msgid/20170331233255.GA38850@syeh-m02 [2]- http://patchwork.freedesktop.org/patch/msgid/20170403163544.kcw5kk52tgku5xua@art_vandelaySigned-off-by:
-
Gerd Hoffmann authored
Lookup format using virtio_gpu_translate_format() instead of hardcoding it. Fixes xorg display on bigendian guests (i.e. ppc64). Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Acked-by:
Laurent Vivier <lvivier@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170403070845.10793-3-kraxel@redhat.com
-
Gerd Hoffmann authored
Factors out code, no functional change. Signed-off-by:
-
Neil Armstrong authored
Meson DRM is switching to drm-misc, so remove the freedesktop drm/meson-drm git repository from MAINTAINERS entry. Acked-by:
-
- 03 Apr, 2017 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxDave Airlie authored
omapdrm changes for 4.12 Main changes include: * Add support for render nodes. * Refactor omapdss code to allow multiple DISPC implementations. This is pre-work for DSS6 support. * Fix replication logic bug, which caused RGB565 fb to be shown too dark on a 24bit display. * Improve detection of display stack readiness, which should remove the probe order issues. * Link panel-dpi with its backlight, so that they are turned on/off in sync. * Fix possibly incorrect setup of sync and data-enable signals. * Get rid of DRM_OMAP_NUM_CRTCS config option. * tag 'omapdrm-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (34 commits) drm/omap: Major omap_modeset_init() cleanup drm/omap: Remove the obsolete #define omap_plane _omap_plane hack drm/omap: Fix one ugly indentation style break left by coccinelle drm/omap: Rename enum omap_plane to enum omap_plane_id drm/omap: Get rid of DRM_OMAP_NUM_CRTCS config option drm/omap: fix crash on module unload drm/omap: use drm_atomic_helper_shutdown() drm/omap: fix display SYNC/DE flags drm/omap: dispc: improve debug print of display flags drm/omap: displays: panel-dpi: Support for handling backlight devices drm/omap: poll only connectors where the connect/disconnect can be checked drm/omap: display: Add displays in sorted order to the panel_list drm/omap: Use omapdss_stack_is_ready() to check that the display stack is up drm/omap: dss: Support for detecting display stack readiness drm/omap: dss: Functions to check components in the display/output list drm/omap: fix replication logic drm/omap: remove unused dispc_wb_enable & dispc_wb_is_enabled drm/omap: remove all EXPORT_SYMBOLs from dispc.c drm/omap: use dispc_ops drm/omap: fill dispc_ops ...
-
Russell King authored
Align the heading with the values output from debugfs. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/E1cttOq-0006GX-U7@rmk-PC.armlinux.org.uk
-
Neil Armstrong authored
Add documentation for added Bus Formats to describe RGB and YUV formats used as input to the Synopsys DesignWare HDMI TX Controller. Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Neil Armstrong authored
In order to describe the RGB and YUV bus formats used to feed the Synopsys DesignWare HDMI TX Controller, add missing formats to the list of Bus Formats. Documentation for these formats is added in a separate patch. Reviewed-by:
-
