- 01 Oct, 2019 40 commits
-
-
Christophe Leroy authored
BugLink: https://bugs.launchpad.net/bugs/1845405 commit 1ba34e71 upstream. Although the HW accepts any size and silently truncates it to the correct length, the extra tests expects EINVAL to be returned when the key size is not valid. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 4de9d0b5 ("crypto: talitos - Add ablkcipher algorithms") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Muchun Song authored
BugLink: https://bugs.launchpad.net/bugs/1845405 commit ac43432c upstream. There is a race condition between removing glue directory and adding a new device under the glue dir. It can be reproduced in following test: CPU1: CPU2: device_add() get_device_parent() class_dir_create_and_add() kobject_add_internal() create_dir() // create glue_dir device_add() get_device_parent() kobject_get() // get glue_dir device_del() cleanup_glue_dir() kobject_del(glue_dir) kobject_add() kobject_add_internal() create_dir() // in glue_dir sysfs_create_dir_ns() kernfs_create_dir_ns(sd) sysfs_remove_dir() // glue_dir->sd=NULL sysfs_put() // free glue_dir->sd // sd is freed kernfs_new_node(sd) kernfs_get(glue_dir) kernfs_add_one() kernfs_put() Before CPU1 remove last child device under glue dir, if CPU2 add a new device under glue dir, the glue_dir kobject reference count will be increase to 2 via kobject_get() in get_device_parent(). And CPU2 has been called kernfs_create_dir_ns(), but not call kernfs_new_node(). Meanwhile, CPU1 call sysfs_remove_dir() and sysfs_put(). This result in glue_dir->sd is freed and it's reference count will be 0. Then CPU2 call kernfs_get(glue_dir) will trigger a warning in kernfs_get() and increase it's reference count to 1. Because glue_dir->sd is freed by CPU1, the next call kernfs_add_one() by CPU2 will fail(This is also use-after-free) and call kernfs_put() to decrease reference count. Because the reference count is decremented to 0, it will also call kmem_cache_free() to free the glue_dir->sd again. This will result in double free. In order to avoid this happening, we also should make sure that kernfs_node for glue_dir is released in CPU1 only when refcount for glue_dir kobj is 1 to fix this race. The following calltrace is captured in kernel 4.14 with the following patch applied: commit 726e4109 ("drivers: core: Remove glue dirs from sysfs earlier") -------------------------------------------------------------------------- [ 3.633703] WARNING: CPU: 4 PID: 513 at .../fs/kernfs/dir.c:494 Here is WARN_ON(!atomic_read(&kn->count) in kernfs_get(). .... [ 3.633986] Call trace: [ 3.633991] kernfs_create_dir_ns+0xa8/0xb0 [ 3.633994] sysfs_create_dir_ns+0x54/0xe8 [ 3.634001] kobject_add_internal+0x22c/0x3f0 [ 3.634005] kobject_add+0xe4/0x118 [ 3.634011] device_add+0x200/0x870 [ 3.634017] _request_firmware+0x958/0xc38 [ 3.634020] request_firmware_into_buf+0x4c/0x70 .... [ 3.634064] kernel BUG at .../mm/slub.c:294! Here is BUG_ON(object == fp) in set_freepointer(). .... [ 3.634346] Call trace: [ 3.634351] kmem_cache_free+0x504/0x6b8 [ 3.634355] kernfs_put+0x14c/0x1d8 [ 3.634359] kernfs_create_dir_ns+0x88/0xb0 [ 3.634362] sysfs_create_dir_ns+0x54/0xe8 [ 3.634366] kobject_add_internal+0x22c/0x3f0 [ 3.634370] kobject_add+0xe4/0x118 [ 3.634374] device_add+0x200/0x870 [ 3.634378] _request_firmware+0x958/0xc38 [ 3.634381] request_firmware_into_buf+0x4c/0x70 -------------------------------------------------------------------------- Fixes: 726e4109 ("drivers: core: Remove glue dirs from sysfs earlier") Signed-off-by:
Muchun Song <smuchun@gmail.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Prateek Sood <prsood@codeaurora.org> Link: https://lore.kernel.org/r/20190727032122.24639-1-smuchun@gmail.comSigned-off-by:
-
Douglas Anderson authored
BugLink: https://bugs.launchpad.net/bugs/1845405 commit 6943b839 upstream. At boot time, my rk3288-veyron devices yell with 8 lines that look like this: [ 0.000000] rockchip_mmc_get_phase: invalid clk rate This is because the clock framework at clk_register() time tries to get the phase but we don't have a parent yet. While the errors appear to be harmless they are still ugly and, in general, we don't want yells like this in the log unless they are important. There's no real reason to be yelling here. We can still return -EINVAL to indicate that the phase makes no sense without a parent. If someone really tries to do tuning and the clock is reported as 0 then we'll see the yells in rockchip_mmc_set_phase(). Fixes: 4bf59902 ("clk: rockchip: Prevent calculating mmc phase if clock rate is zero") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Paul Burton authored
BugLink: https://bugs.launchpad.net/bugs/1845405 commit 0648e50e upstream. The MIPS VDSO build currently doesn't provide the -msoft-float flag to the compiler as the kernel proper does. This results in an attempt to use the compiler's default floating point configuration, which can be problematic in cases where this is incompatible with the target CPU's -march= flag. For example decstation_defconfig fails to build using toolchains in which gcc was configured --with-fp-32=xx with the following error: LDS arch/mips/vdso/vdso.lds cc1: error: '-march=r3000' requires '-mfp32' make[2]: *** [scripts/Makefile.build:379: arch/mips/vdso/vdso.lds] Error 1 The kernel proper avoids this error because we build with the -msoft-float compiler flag, rather than using the compiler's default. Pass this flag through to the VDSO build so that it too becomes agnostic to the toolchain's floating point configuration. Note that this is filtered out from KBUILD_CFLAGS rather than simply always using -msoft-float such that if we switch the kernel to use -mno-float in the future the VDSO will automatically inherit the change. The VDSO doesn't actually include any floating point code, and its .MIPS.abiflags section is already manually generated to specify that it's compatible with any floating point ABI. As such this change should have no effect on the resulting VDSO, apart from fixing the build failure for affected toolchains. Signed-off-by:
Paul Burton <paul.burton@mips.com> Reported-by:
Kevin Hilman <khilman@baylibre.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
-
Paul Burton authored
BugLink: https://bugs.launchpad.net/bugs/1845405 commit 351fdddd upstream. VDSO code should not be using smp_processor_id(), since it is executed in user mode. Introduce a VDSO-specific path which will cause a compile-time or link-time error (depending upon support for __compiletime_error) if the VDSO ever incorrectly attempts to use smp_processor_id(). [Matt Redfearn <matt.redfearn@imgtec.com>: Move before change to smp_processor_id in series] Signed-off-by:
Matt Redfearn <matt.redfearn@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/17932/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Paolo Bonzini authored
BugLink: https://bugs.launchpad.net/bugs/1845405 commit f7eea636 upstream. The implementation of vmread to memory is still incomplete, as it lacks the ability to do vmread to I/O memory just like vmptrst. Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Fuqian Huang authored
BugLink: https://bugs.launchpad.net/bugs/1845405 commit 541ab2ae upstream. Emulation of VMPTRST can incorrectly inject a page fault when passed an operand that points to an MMIO address. The page fault will use uninitialized kernel stack memory as the CR2 and error code. The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR exit to userspace; however, it is not an easy fix, so for now just ensure that the error code and CR2 are zero. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Cc: stable@vger.kernel.org [add comment] Signed-off-by:
-
Thomas Huth authored
BugLink: https://bugs.launchpad.net/bugs/1845405 commit 53936b5b upstream. When the userspace program runs the KVM_S390_INTERRUPT ioctl to inject an interrupt, we convert them from the legacy struct kvm_s390_interrupt to the new struct kvm_s390_irq via the s390int_to_s390irq() function. However, this function does not take care of all types of interrupts that we can inject into the guest later (see do_inject_vcpu()). Since we do not clear out the s390irq values before calling s390int_to_s390irq(), there is a chance that we copy random data from the kernel stack which could be leaked to the userspace later. Specifically, the problem exists with the KVM_S390_INT_PFAULT_INIT interrupt: s390int_to_s390irq() does not handle it, and the function __inject_pfault_init() later copies irq->u.ext which contains the random kernel stack data. This data can then be leaked either to the guest memory in __deliver_pfault_init(), or the userspace might retrieve it directly with the KVM_S390_GET_IRQ_STATE ioctl. Fix it by handling that interrupt type in s390int_to_s390irq(), too, and by making sure that the s390irq struct is properly pre-initialized. And while we're at it, make sure that s390int_to_s390irq() now directly returns -EINVAL for unknown interrupt types, so that we immediately get a proper error code in case we add more interrupt types to do_inject_vcpu() without updating s390int_to_s390irq() sometime in the future. Cc: stable@vger.kernel.org Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Janosch Frank <frankja@linux.ibm.com> Signed-off-by:
Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/kvm/20190912115438.25761-1-thuth@redhat.comSigned-off-by:
-
Yunfeng Ye authored
BugLink: https://bugs.launchpad.net/bugs/1845405 commit eddf3e9c upstream. The following crash was observed: Unable to handle kernel NULL pointer dereference at 0000000000000158 Internal error: Oops: 96000004 [#1] SMP pc : resend_irqs+0x68/0xb0 lr : resend_irqs+0x64/0xb0 ... Call trace: resend_irqs+0x68/0xb0 tasklet_action_common.isra.6+0x84/0x138 tasklet_action+0x2c/0x38 __do_softirq+0x120/0x324 run_ksoftirqd+0x44/0x60 smpboot_thread_fn+0x1ac/0x1e8 kthread+0x134/0x138 ret_from_fork+0x10/0x18 The reason for this is that the interrupt resend mechanism happens in soft interrupt context, which is a asynchronous mechanism versus other operations on interrupts. free_irq() does not take resend handling into account. Thus, the irq descriptor might be already freed before the resend tasklet is executed. resend_irqs() does not check the return value of the interrupt descriptor lookup and derefences the return value unconditionally. 1): __setup_irq irq_startup check_irq_resend // activate softirq to handle resend irq 2): irq_domain_free_irqs irq_free_descs free_desc call_rcu(&desc->rcu, delayed_free_desc) 3): __do_softirq tasklet_action resend_irqs desc = irq_to_desc(irq) desc->handle_irq(desc) // desc is NULL --> Ooops Fix this by adding a NULL pointer check in resend_irqs() before derefencing the irq descriptor. Fixes: a4633adc ("[PATCH] genirq: add genirq sw IRQ-retrigger") Signed-off-by:
Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1630ae13-5c8e-901e-de09-e740b6a426a7@huawei.comSigned-off-by:
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1845405 commit 410f954c upstream. Sometimes when fsync'ing a file we need to log that other inodes exist and when we need to do that we acquire a reference on the inodes and then drop that reference using iput() after logging them. That generally is not a problem except if we end up doing the final iput() (dropping the last reference) on the inode and that inode has a link count of 0, which can happen in a very short time window if the logging path gets a reference on the inode while it's being unlinked. In that case we end up getting the eviction callback, btrfs_evict_inode(), invoked through the iput() call chain which needs to drop all of the inode's items from its subvolume btree, and in order to do that, it needs to join a transaction at the helper function evict_refill_and_join(). However because the task previously started a transaction at the fsync handler, btrfs_sync_file(), it has current->journal_info already pointing to a transaction handle and therefore evict_refill_and_join() will get that transaction handle from btrfs_join_transaction(). From this point on, two different problems can happen: 1) evict_refill_and_join() will often change the transaction handle's block reserve (->block_rsv) and set its ->bytes_reserved field to a value greater than 0. If evict_refill_and_join() never commits the transaction, the eviction handler ends up decreasing the reference count (->use_count) of the transaction handle through the call to btrfs_end_transaction(), and after that point we have a transaction handle with a NULL ->block_rsv (which is the value prior to the transaction join from evict_refill_and_join()) and a ->bytes_reserved value greater than 0. If after the eviction/iput completes the inode logging path hits an error or it decides that it must fallback to a transaction commit, the btrfs fsync handle, btrfs_sync_file(), gets a non-zero value from btrfs_log_dentry_safe(), and because of that non-zero value it tries to commit the transaction using a handle with a NULL ->block_rsv and a non-zero ->bytes_reserved value. This makes the transaction commit hit an assertion failure at btrfs_trans_release_metadata() because ->bytes_reserved is not zero but the ->block_rsv is NULL. The produced stack trace for that is like the following: [192922.917158] assertion failed: !trans->bytes_reserved, file: fs/btrfs/transaction.c, line: 816 [192922.917553] ------------[ cut here ]------------ [192922.917922] kernel BUG at fs/btrfs/ctree.h:3532! [192922.918310] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [192922.918666] CPU: 2 PID: 883 Comm: fsstress Tainted: G W 5.1.4-btrfs-next-47 #1 [192922.919035] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [192922.919801] RIP: 0010:assfail.constprop.25+0x18/0x1a [btrfs] (...) [192922.920925] RSP: 0018:ffffaebdc8a27da8 EFLAGS: 00010286 [192922.921315] RAX: 0000000000000051 RBX: ffff95c9c16a41c0 RCX: 0000000000000000 [192922.921692] RDX: 0000000000000000 RSI: ffff95cab6b16838 RDI: ffff95cab6b16838 [192922.922066] RBP: ffff95c9c16a41c0 R08: 0000000000000000 R09: 0000000000000000 [192922.922442] R10: ffffaebdc8a27e70 R11: 0000000000000000 R12: ffff95ca731a0980 [192922.922820] R13: 0000000000000000 R14: ffff95ca84c73338 R15: ffff95ca731a0ea8 [192922.923200] FS: 00007f337eda4e80(0000) GS:ffff95cab6b00000(0000) knlGS:0000000000000000 [192922.923579] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [192922.923948] CR2: 00007f337edad000 CR3: 00000001e00f6002 CR4: 00000000003606e0 [192922.924329] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [192922.924711] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [192922.925105] Call Trace: [192922.925505] btrfs_trans_release_metadata+0x10c/0x170 [btrfs] [192922.925911] btrfs_commit_transaction+0x3e/0xaf0 [btrfs] [192922.926324] btrfs_sync_file+0x44c/0x490 [btrfs] [192922.926731] do_fsync+0x38/0x60 [192922.927138] __x64_sys_fdatasync+0x13/0x20 [192922.927543] do_syscall_64+0x60/0x1c0 [192922.927939] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [192922.934077] ---[ end trace f00808b12068168f ]--- 2) If evict_refill_and_join() decides to commit the transaction, it will be able to do it, since the nested transaction join only increments the transaction handle's ->use_count reference counter and it does not prevent the transaction from getting committed. This means that after eviction completes, the fsync logging path will be using a transaction handle that refers to an already committed transaction. What happens when using such a stale transaction can be unpredictable, we are at least having a use-after-free on the transaction handle itself, since the transaction commit will call kmem_cache_free() against the handle regardless of its ->use_count value, or we can end up silently losing all the updates to the log tree after that iput() in the logging path, or using a transaction handle that in the meanwhile was allocated to another task for a new transaction, etc, pretty much unpredictable what can happen. In order to fix both of them, instead of using iput() during logging, use btrfs_add_delayed_iput(), so that the logging path of fsync never drops the last reference on an inode, that step is offloaded to a safe context (usually the cleaner kthread). The assertion failure issue was sporadically triggered by the test case generic/475 from fstests, which loads the dm error target while fsstress is running, which lead to fsync failing while logging inodes with -EIO errors and then trying later to commit the transaction, triggering the assertion failure. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1845405 This reverts commit c890a458 which is commit e4849aff upstream Guenter writes: Upstream commit e4849aff ("MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur") results in build failures in v4.4.y and v4.14.y. make bigsur_defconfig: warning: (SIBYTE_SWARM && SIBYTE_SENTOSA && SIBYTE_BIGSUR && SWIOTLB_XEN && AMD_IOMMU) selects SWIOTLB which has unmet direct dependencies (CAVIUM_OCTEON_SOC || MACH_LOONGSON64 && CPU_LOONGSON3 || NLM_XLP_BOARD || NLM_XLR_BOARD) warning: (SIBYTE_SWARM && SIBYTE_SENTOSA && SIBYTE_BIGSUR && SWIOTLB_XEN && AMD_IOMMU) selects SWIOTLB which has unmet direct dependencies (CAVIUM_OCTEON_SOC || MACH_LOONGSON64 && CPU_LOONGSON3 || NLM_XLP_BOARD || NLM_XLR_BOARD) and the actual build: lib/swiotlb.o: In function `swiotlb_tbl_map_single': (.text+0x1c0): undefined reference to `iommu_is_span_boundary' Makefile:1021: recipe for target 'vmlinux' failed Reported-by:
-
Yang Yingliang authored
BugLink: https://bugs.launchpad.net/bugs/1845405 [ Upstream commit 77f22f92 ] I got a UAF repport in tun driver when doing fuzzy test: [ 466.269490] ================================================================== [ 466.271792] BUG: KASAN: use-after-free in tun_chr_read_iter+0x2ca/0x2d0 [ 466.271806] Read of size 8 at addr ffff888372139250 by task tun-test/2699 [ 466.271810] [ 466.271824] CPU: 1 PID: 2699 Comm: tun-test Not tainted 5.3.0-rc1-00001-g5a9433db2614-dirty #427 [ 466.271833] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 466.271838] Call Trace: [ 466.271858] dump_stack+0xca/0x13e [ 466.271871] ? tun_chr_read_iter+0x2ca/0x2d0 [ 466.271890] print_address_description+0x79/0x440 [ 466.271906] ? vprintk_func+0x5e/0xf0 [ 466.271920] ? tun_chr_read_iter+0x2ca/0x2d0 [ 466.271935] __kasan_report+0x15c/0x1df [ 466.271958] ? tun_chr_read_iter+0x2ca/0x2d0 [ 466.271976] kasan_report+0xe/0x20 [ 466.271987] tun_chr_read_iter+0x2ca/0x2d0 [ 466.272013] do_iter_readv_writev+0x4b7/0x740 [ 466.272032] ? default_llseek+0x2d0/0x2d0 [ 466.272072] do_iter_read+0x1c5/0x5e0 [ 466.272110] vfs_readv+0x108/0x180 [ 466.299007] ? compat_rw_copy_check_uvector+0x440/0x440 [ 466.299020] ? fsnotify+0x888/0xd50 [ 466.299040] ? __fsnotify_parent+0xd0/0x350 [ 466.299064] ? fsnotify_first_mark+0x1e0/0x1e0 [ 466.304548] ? vfs_write+0x264/0x510 [ 466.304569] ? ksys_write+0x101/0x210 [ 466.304591] ? do_preadv+0x116/0x1a0 [ 466.304609] do_preadv+0x116/0x1a0 [ 466.309829] do_syscall_64+0xc8/0x600 [ 466.309849] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 466.309861] RIP: 0033:0x4560f9 [ 466.309875] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 [ 466.309889] RSP: 002b:00007ffffa5166e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000127 [ 466.322992] RAX: ffffffffffffffda RBX: 0000000000400460 RCX: 00000000004560f9 [ 466.322999] RDX: 0000000000000003 RSI: 00000000200008c0 RDI: 0000000000000003 [ 466.323007] RBP: 00007ffffa516700 R08: 0000000000000004 R09: 0000000000000000 [ 466.323014] R10: 0000000000000000 R11: 0000000000000206 R12: 000000000040cb10 [ 466.323021] R13: 0000000000000000 R14: 00000000006d7018 R15: 0000000000000000 [ 466.323057] [ 466.323064] Allocated by task 2605: [ 466.335165] save_stack+0x19/0x80 [ 466.336240] __kasan_kmalloc.constprop.8+0xa0/0xd0 [ 466.337755] kmem_cache_alloc+0xe8/0x320 [ 466.339050] getname_flags+0xca/0x560 [ 466.340229] user_path_at_empty+0x2c/0x50 [ 466.341508] vfs_statx+0xe6/0x190 [ 466.342619] __do_sys_newstat+0x81/0x100 [ 466.343908] do_syscall_64+0xc8/0x600 [ 466.345303] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 466.347034] [ 466.347517] Freed by task 2605: [ 466.348471] save_stack+0x19/0x80 [ 466.349476] __kasan_slab_free+0x12e/0x180 [ 466.350726] kmem_cache_free+0xc8/0x430 [ 466.351874] putname+0xe2/0x120 [ 466.352921] filename_lookup+0x257/0x3e0 [ 466.354319] vfs_statx+0xe6/0x190 [ 466.355498] __do_sys_newstat+0x81/0x100 [ 466.356889] do_syscall_64+0xc8/0x600 [ 466.358037] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 466.359567] [ 466.360050] The buggy address belongs to the object at ffff888372139100 [ 466.360050] which belongs to the cache names_cache of size 4096 [ 466.363735] The buggy address is located 336 bytes inside of [ 466.363735] 4096-byte region [ffff888372139100, ffff88837213a100) [ 466.367179] The buggy address belongs to the page: [ 466.368604] page:ffffea000dc84e00 refcount:1 mapcount:0 mapping:ffff8883df1b4f00 index:0x0 compound_mapcount: 0 [ 466.371582] flags: 0x2fffff80010200(slab|head) [ 466.372910] raw: 002fffff80010200 dead000000000100 dead000000000122 ffff8883df1b4f00 [ 466.375209] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 466.377778] page dumped because: kasan: bad access detected [ 466.379730] [ 466.380288] Memory state around the buggy address: [ 466.381844] ffff888372139100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.384009] ffff888372139180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.386131] >ffff888372139200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.388257] ^ [ 466.390234] ffff888372139280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.392512] ffff888372139300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.394667] ================================================================== tun_chr_read_iter() accessed the memory which freed by free_netdev() called by tun_set_iff(): CPUA CPUB tun_set_iff() alloc_netdev_mqs() tun_attach() tun_chr_read_iter() tun_get() tun_do_read() tun_ring_recv() register_netdevice() <-- inject error goto err_detach tun_detach_all() <-- set RCV_SHUTDOWN free_netdev() <-- called from err_free_dev path netdev_freemem() <-- free the memory without check refcount (In this path, the refcount cannot prevent freeing the memory of dev, and the memory will be used by dev_put() called by tun_chr_read_iter() on CPUB.) (Break from tun_ring_recv(), because RCV_SHUTDOWN is set) tun_put() dev_put() <-- use the memory freed by netdev_freemem() Put the publishing of tfile->tun after register_netdevice(), so tun_get() won't get the tun pointer that freed by err_detach path if register_netdevice() failed. Fixes: eb0fb363 ("tuntap: attach queue 0 before registering netdevice") Reported-by:
Hulk Robot <hulkci@huawei.com> Suggested-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1845405 [ Upstream commit 42dec1db ] Unlike kfree(p), kfree_rcu(p, rcu) won't do NULL pointer check. When tipc_nametbl_remove_publ returns NULL, the panic below happens: BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 RIP: 0010:__call_rcu+0x1d/0x290 Call Trace: <IRQ> tipc_publ_notify+0xa9/0x170 [tipc] tipc_node_write_unlock+0x8d/0x100 [tipc] tipc_node_link_down+0xae/0x1d0 [tipc] tipc_node_check_dest+0x3ea/0x8f0 [tipc] ? tipc_disc_rcv+0x2c7/0x430 [tipc] tipc_disc_rcv+0x2c7/0x430 [tipc] ? tipc_rcv+0x6bb/0xf20 [tipc] tipc_rcv+0x6bb/0xf20 [tipc] ? ip_route_input_slow+0x9cf/0xb10 tipc_udp_recv+0x195/0x1e0 [tipc] ? tipc_udp_is_known_peer+0x80/0x80 [tipc] udp_queue_rcv_skb+0x180/0x460 udp_unicast_rcv_skb.isra.56+0x75/0x90 __udp4_lib_rcv+0x4ce/0xb90 ip_local_deliver_finish+0x11c/0x210 ip_local_deliver+0x6b/0xe0 ? ip_rcv_finish+0xa9/0x410 ip_rcv+0x273/0x362 Fixes: 97ede29e ("tipc: convert name table read-write lock to RCU") Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Neal Cardwell authored
BugLink: https://bugs.launchpad.net/bugs/1845405 [ Upstream commit af38d07e ] Fix tcp_ecn_withdraw_cwr() to clear the correct bit: TCP_ECN_QUEUE_CWR. Rationale: basically, TCP_ECN_DEMAND_CWR is a bit that is purely about the behavior of data receivers, and deciding whether to reflect incoming IP ECN CE marks as outgoing TCP th->ece marks. The TCP_ECN_QUEUE_CWR bit is purely about the behavior of data senders, and deciding whether to send CWR. The tcp_ecn_withdraw_cwr() function is only called from tcp_undo_cwnd_reduction() by data senders during an undo, so it should zero the sender-side state, TCP_ECN_QUEUE_CWR. It does not make sense to stop the reflection of incoming CE bits on incoming data packets just because outgoing packets were spuriously retransmitted. The bug has been reproduced with packetdrill to manifest in a scenario with RFC3168 ECN, with an incoming data packet with CE bit set and carrying a TCP timestamp value that causes cwnd undo. Before this fix, the IP CE bit was ignored and not reflected in the TCP ECE header bit, and sender sent a TCP CWR ('W') bit on the next outgoing data packet, even though the cwnd reduction had been undone. After this fix, the sender properly reflects the CE bit and does not set the W bit. Note: the bug actually predates 2005 git history; this Fixes footer is chosen to be the oldest SHA1 I have tested (from Sep 2007) for which the patch applies cleanly (since before this commit the code was in a .h file). Fixes: bdf1ee5d ("[TCP]: Move code from tcp_ecn.h to tcp*.c and tcp.h & remove it") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1845405 [ Upstream commit 10eb56c5 ] Transport should use its own pf_retrans to do the error_count check, instead of asoc's. Otherwise, it's meaningless to make pf_retrans per transport. Fixes: 5aa93bcf ("sctp: Implement quick failover draft from tsvwg") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Christophe JAILLET authored
BugLink: https://bugs.launchpad.net/bugs/1845405 [ Upstream commit b456d724 ] The '.exit' functions from 'pernet_operations' structure should be marked as __net_exit, not __net_init. Fixes: 8e2d61e0 ("sctp: fix race on protocol/netns initialization") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1845405 [ Upstream commit d4d6ec6d ] In case of TCA_HHF_NON_HH_WEIGHT or TCA_HHF_QUANTUM is zero, it would make no progress inside the loop in hhf_dequeue() thus kernel would get stuck. Fix this by checking this corner case in hhf_change(). Fixes: 10239edf ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Reported-by: syzbot+bc6297c11f19ee807dc2@syzkaller.appspotmail.com Reported-by: syzbot+041483004a7f45f1f20a@syzkaller.appspotmail.com Reported-by: syzbot+55be5f513bed37fc4367@syzkaller.appspotmail.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Terry Lam <vtlam@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
BugLink: https://bugs.launchpad.net/bugs/1845405 [ Upstream commit 10cc514f ] In event of failure during register_netdevice, free_netdev is invoked immediately. free_netdev assumes that all the netdevice refcounts have been dropped prior to it being called and as a result frees and clears out the refcount pointer. However, this is not necessarily true as some of the operations in the NETDEV_UNREGISTER notifier handlers queue RCU callbacks for invocation after a grace period. The IPv4 callback in_dev_rcu_put tries to access the refcount after free_netdev is called which leads to a null de-reference- 44837.761523: <6> Unable to handle kernel paging request at virtual address 0000004a88287000 44837.761651: <2> pc : in_dev_finish_destroy+0x4c/0xc8 44837.761654: <2> lr : in_dev_finish_destroy+0x2c/0xc8 44837.762393: <2> Call trace: 44837.762398: <2> in_dev_finish_destroy+0x4c/0xc8 44837.762404: <2> in_dev_rcu_put+0x24/0x30 44837.762412: <2> rcu_nocb_kthread+0x43c/0x468 44837.762418: <2> kthread+0x118/0x128 44837.762424: <2> ret_from_fork+0x10/0x1c Fix this by waiting for the completion of the call_rcu() in case of register_netdevice errors. Fixes: 93ee31f1 ("[NET]: Fix free_netdev on register_netdev failure.") Cc: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1845405 [ Upstream commit fe163e53 ] syzbot reported: BUG: KMSAN: uninit-value in capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700 CPU: 0 PID: 10025 Comm: syz-executor379 Not tainted 4.20.0-rc7+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700 do_loop_readv_writev fs/read_write.c:703 [inline] do_iter_write+0x83e/0xd80 fs/read_write.c:961 vfs_writev fs/read_write.c:1004 [inline] do_writev+0x397/0x840 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev+0x9b/0xb0 fs/read_write.c:1109 __x64_sys_writev+0x4a/0x70 fs/read_write.c:1109 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 [...] The problem is that capi_write() is reading past the end of the message. Fix it by checking the message's length in the needed places. Reported-and-tested-by: syzbot+0849c524d9c634f5ae66@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Christophe JAILLET authored
BugLink: https://bugs.launchpad.net/bugs/1845405 [ Upstream commit d23dbc47 ] The '.exit' functions from 'pernet_operations' structure should be marked as __net_exit, not __net_init. Fixes: d862e546 ("net: ipv6: Implement /proc/net/icmp6.") Signed-off-by:
-
Bjørn Mork authored
BugLink: https://bugs.launchpad.net/bugs/1845405 [ Upstream commit 4d7ffcf3 ] A Mediatek based smartphone owner reports problems with USB tethering in Linux. The verbose USB listing shows a rndis_host interface pair (e0/01/03 + 10/00/00), but the driver fails to bind with [ 355.960428] usb 1-4: bad CDC descriptors The problem is a failsafe test intended to filter out ACM serial functions using the same 02/02/ff class/subclass/protocol as RNDIS. The serial functions are recognized by their non-zero bmCapabilities. No RNDIS function with non-zero bmCapabilities were known at the time this failsafe was added. But it turns out that some Wireless class RNDIS functions are using the bmCapabilities field. These functions are uniquely identified as RNDIS by their class/subclass/protocol, so the failing test can safely be disabled. The same applies to the two types of Misc class RNDIS functions. Applying the failsafe to Communication class functions only retains the original functionality, and fixes the problem for the Mediatek based smartphone. Tow examples of CDC functional descriptors with non-zero bmCapabilities from Wireless class RNDIS functions are: 0e8d:000a Mediatek Crosscall Spider X5 3G Phone CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x0f connection notifications sends break line coding and serial state get/set/clear comm features CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 and 19d2:1023 ZTE K4201-z CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 The Mediatek example is believed to apply to most smartphones with Mediatek firmware. The ZTE example is most likely also part of a larger family of devices/firmwares. Suggested-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Nicolas Dichtel authored
BugLink: https://bugs.launchpad.net/bugs/1845405 [ Upstream commit 94a72b3f ] NLM_F_MULTI must be used only when a NLMSG_DONE message is sent at the end. In fact, NLMSG_DONE is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: 949f1e39 ("bridge: mdb: notify on router port add and del") CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Matt Delco authored
commit b60fe990 upstream. The first/last indexes are typically shared with a user app. The app can change the 'last' index that the kernel uses to store the next result. This change sanity checks the index before using it for writing to a potentially arbitrary address. This fixes CVE-2019-14821. Cc: stable@vger.kernel.org Fixes: 5f94c174 ("KVM: Add coalesced MMIO support (common part)") Signed-off-by:
Matt Delco <delco@chromium.org> Signed-off-by:
Jim Mattson <jmattson@google.com> Reported-by: syzbot+983c866c3dd6efa3662a@syzkaller.appspotmail.com [Use READ_ONCE. - Paolo] Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Acked-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
Sultan Alsawaf <sultan.alsawaf@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1845395Signed-off-by:
-
Dave Jones authored
BugLink: https://bugs.launchpad.net/bugs/1845395 [ Upstream commit 6ae81ced ] Trinity and other fuzzers can hit this WARN on far too easily, resulting in a tainted kernel that hinders automated fuzzing. Replace it with a rate-limited printk. Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Zhenzhong Duan authored
BugLink: https://bugs.launchpad.net/bugs/1845395 commit 8c5477e8 upstream. Kernel build warns: 'sanitize_boot_params' defined but not used [-Wunused-function] at below files: arch/x86/boot/compressed/cmdline.c arch/x86/boot/compressed/error.c arch/x86/boot/compressed/early_serial_console.c arch/x86/boot/compressed/acpi.c That's becausethey each include misc.h which includes a definition of sanitize_boot_params() via bootparam_utils.h. Remove the inclusion from misc.h and have the c file including bootparam_utils.h directly. Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1845395 [ Upstream commit 9c940bbe ] Clang warns after commit 8985167e ("clk: s2mps11: Fix matching when built as module and DT node contains compatible"): drivers/clk/clk-s2mps11.c:242:34: warning: variable 's2mps11_dt_match' is not needed and will not be emitted [-Wunneeded-internal-declaration] static const struct of_device_id s2mps11_dt_match[] = { ^ 1 warning generated. This warning happens when a variable is used in some construct that doesn't require a reference to that variable to be emitted in the symbol table; in this case, it's MODULE_DEVICE_TABLE, which only needs to hold the data of the variable, not the variable itself. $ nm -S drivers/clk/clk-s2mps11.o | rg s2mps11_dt_match 00000078 000003d4 R __mod_of__s2mps11_dt_match_device_table Normally, with device ID table variables, it means that the variable just needs to be tied to the device declaration at the bottom of the file, like s2mps11_clk_id: $ nm -S drivers/clk/clk-s2mps11.o | rg s2mps11_clk_id 00000000 00000078 R __mod_platform__s2mps11_clk_id_device_table 00000000 00000078 r s2mps11_clk_id However, because the comment above this deliberately doesn't want this variable added to .of_match_table, we need to mark s2mps11_dt_match as __used to silence this warning. This makes it clear to Clang that the variable is used for something, even if a reference to it isn't being emitted. Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Nicolas Boichat authored
BugLink: https://bugs.launchpad.net/bugs/1845395 [ Upstream commit 31013836 ] The basepath may contain special characters, which would confuse the regex matcher. ${var#prefix} does the right thing. Link: http://lkml.kernel.org/r/20190518055946.181563-1-drinkcat@chromium.org Fixes: 67a28de4 ("scripts/decode_stacktrace: only strip base path when a prefix of the path") Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tiwei Bie authored
BugLink: https://bugs.launchpad.net/bugs/1845395 commit 264b563b upstream. Since vhost_exceeds_weight() was introduced, callers need to specify the packet weight and byte weight in vhost_dev_init(). Note that, the packet weight isn't counted in this patch to keep the original behavior unchanged. Fixes: e82b9b07 ("vhost: introduce vhost_exceeds_weight()") Cc: stable@vger.kernel.org Signed-off-by:
Tiwei Bie <tiwei.bie@intel.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1845395 commit dbb2483b upstream. In commit 6a53b759 ("xfrm: check id proto in validate_tmpl()") I introduced a check for xfrm protocol, but according to Herbert IPSEC_PROTO_ANY should only be used as a wildcard for lookup, so it should be removed from validate_tmpl(). And, IPSEC_PROTO_ANY is expected to only match 3 IPSec-specific protocols, this is why xfrm_state_flush() could still miss IPPROTO_ROUTING, which leads that those entries are left in net->xfrm.state_all before exit net. Fix this by replacing IPSEC_PROTO_ANY with zero. This patch also extracts the check from validate_tmpl() to xfrm_id_proto_valid() and uses it in parse_ipsecrequest(). With this, no other protocols should be added into xfrm. Fixes: 6a53b759 ("xfrm: check id proto in validate_tmpl()") Reported-by: syzbot+0bf0519d6e0de15914fe@syzkaller.appspotmail.com Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1845395 commit 89781d08 upstream. The recent change to shuffle the codec initialization procedure for Realtek via commit 607ca3bd ("ALSA: hda/realtek - EAPD turn on later") caused the silent output on some machines. This change was supposed to be safe, but it isn't actually; some devices have quirk setups to override the EAPD via COEF or BTL in the additional verb table, which is applied at the beginning of snd_hda_gen_init(). And this EAPD setup is again overridden in alc_auto_init_amp(). For recovering from the regression, tell snd_hda_gen_init() not to apply the verbs there by a new flag, then apply the verbs in alc_init(). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204727 Fixes: 607ca3bd ("ALSA: hda/realtek - EAPD turn on later") Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1845395 commit 333f3143 upstream. Since the chained quirks via chained_before flag is applied before the depth check, it may lead to the endless recursive calls, when the chain were set up incorrectly. Fix it by moving the depth check at the beginning of the loop. Fixes: 1f578250 ("ALSA: hda - Add chained_before flag to the fixup entry") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1845374Signed-off-by:
-
Chen-Yu Tsai authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 3b25528e ] The devicetree binding lists the phy phy as optional. As such, the driver should not bail out if it can't find a regulator. Instead it should just skip the remaining regulator related code and continue on normally. Skip the remainder of phy_power_on() if a regulator supply isn't available. This also gets rid of the bogus return code. Fixes: 2e12f536 ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Feng Sun authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 2c1644cf ] After commit baeababb ("tun: return NET_XMIT_DROP for dropped packets"), when tun_net_xmit drop packets, it will free skb and return NET_XMIT_DROP, netpoll_send_skb_on_dev will run into following use after free cases: 1. retry netpoll_start_xmit with freed skb; 2. queue freed skb in npinfo->txq. queue_process will also run into use after free case. hit netpoll_send_skb_on_dev first case with following kernel log: [ 117.864773] kernel BUG at mm/slub.c:306! [ 117.864773] invalid opcode: 0000 [#1] SMP PTI [ 117.864774] CPU: 3 PID: 2627 Comm: loop_printmsg Kdump: loaded Tainted: P OE 5.3.0-050300rc5-generic #201908182231 [ 117.864775] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 117.864775] RIP: 0010:kmem_cache_free+0x28d/0x2b0 [ 117.864781] Call Trace: [ 117.864781] ? tun_net_xmit+0x21c/0x460 [ 117.864781] kfree_skbmem+0x4e/0x60 [ 117.864782] kfree_skb+0x3a/0xa0 [ 117.864782] tun_net_xmit+0x21c/0x460 [ 117.864782] netpoll_start_xmit+0x11d/0x1b0 [ 117.864788] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864789] __br_forward+0x1b9/0x1e0 [bridge] [ 117.864789] ? skb_clone+0x53/0xd0 [ 117.864790] ? __skb_clone+0x2e/0x120 [ 117.864790] deliver_clone+0x37/0x50 [bridge] [ 117.864790] maybe_deliver+0x89/0xc0 [bridge] [ 117.864791] br_flood+0x6c/0x130 [bridge] [ 117.864791] br_dev_xmit+0x315/0x3c0 [bridge] [ 117.864792] netpoll_start_xmit+0x11d/0x1b0 [ 117.864792] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864792] netpoll_send_udp+0x2c6/0x3e8 [ 117.864793] write_msg+0xd9/0xf0 [netconsole] [ 117.864793] console_unlock+0x386/0x4e0 [ 117.864793] vprintk_emit+0x17e/0x280 [ 117.864794] vprintk_default+0x29/0x50 [ 117.864794] vprintk_func+0x4c/0xbc [ 117.864794] printk+0x58/0x6f [ 117.864795] loop_fun+0x24/0x41 [printmsg_loop] [ 117.864795] kthread+0x104/0x140 [ 117.864795] ? 0xffffffffc05b1000 [ 117.864796] ? kthread_park+0x80/0x80 [ 117.864796] ret_from_fork+0x35/0x40 Signed-off-by:
Feng Sun <loyou85@gmail.com> Signed-off-by:
Xiaojun Zhao <xiaojunzhao141@gmail.com> Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 950b07c1 ] This reverts commit 558682b5. Chris Wilson reports that it breaks his CPU hotplug test scripts. In particular, it breaks offlining and then re-onlining the boot CPU, which we treat specially (and the BIOS does too). The symptoms are that we can offline the CPU, but it then does not come back online again: smpboot: CPU 0 is now offline smpboot: Booting Node 0 Processor 0 APIC 0x0 smpboot: do_boot_cpu failed(-1) to wakeup CPU#0 Thomas says he knows why it's broken (my personal suspicion: our magic handling of the "cpu0_logical_apicid" thing), but for 5.3 the right fix is to just revert it, since we've never touched the LDR bits before, and it's not worth the risk to do anything else at this stage. [ Hotpluging of the boot CPU is special anyway, and should be off by default. See the "BOOTPARAM_HOTPLUG_CPU0" config option and the cpu0_hotplug kernel parameter. In general you should not do it, and it has various known limitations (hibernate and suspend require the boot CPU, for example). But it should work, even if the boot CPU is special and needs careful treatment - Linus ] Link: https://lore.kernel.org/lkml/156785100521.13300.14461504732265570003@skylake-alporthouse-com/Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
-
Martin Sperl authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 73b114ee ] On long running tests with a mcp2517fd can controller it showed that on rare occations the data read shows corruptions for longer spi transfers. Example of a 22 byte transfer: expected (as captured on logic analyzer): FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 85 86 87 88 89 8a 8b read by the driver: FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 88 89 8a 00 00 8b 9b To fix this use BCM2835_AUX_SPI_STAT_RX_LVL to determine when we may read data from the fifo reliably without any corruption. Surprisingly the only values ever empirically read in BCM2835_AUX_SPI_STAT_RX_LVL are 0x00, 0x10, 0x20 and 0x30. So whenever the mask is not 0 we can read from the fifo in a safe manner. The patch has now been tested intensively and we are no longer able to reproduce the "RX" issue any longer. Fixes: 1ea29b39 ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Reported-by:
Hubert Denkmair <h.denkmair@intence.de> Signed-off-by:
Martin Sperl <kernel@martin.sperl.org> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Martin Sperl authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit c7de8500 ] This read of the fifo is a potential candidate for a race condition as the spi transfer is not necessarily finished and so can lead to an early read of the fifo that still misses data. So it has been removed. Fixes: 1ea29b39 ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Suggested-by:
-
Martin Sperl authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 7188a6f0 ] Sharing more code between polling and interrupt-driven mode. Signed-off-by:
-
Rob Herring authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit bc519d95 ] The BCM2835 AUX SPI has a shared interrupt line (with AUX UART). Downstream fixes this with an AUX irqchip to demux the IRQ sources and a DT change which breaks compatibility with older kernels. The AUX irqchip was already rejected for upstream[1] and the DT change would break working systems if the DTB is updated to a newer one. The latter issue was brought to my attention by Alex Graf. The root cause however is a bug in the shared handler. Shared handlers must check that interrupts are actually enabled before servicing the interrupt. Add a check that the TXEMPTY or IDLE interrupts are enabled. [1] https://patchwork.kernel.org/patch/9781221/ Cc: Alexander Graf <agraf@suse.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-spi@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
