Notable changes include pool op defines and types, FLOCK feature bit, and
new CMPXATTR osd ops.
Signed-off-by: Sage Weil <sage@newdream.net>

Drop the 'user.' prefix and use just 'ceph.' for fs virtual xattrs.
Signed-off-by: Sage Weil <sage@newdream.net>

The remove_session_caps() helper is called when an MDS closes out our
session (either normally, or as a result of a failed reconnect), and when
we tear down state for umount.  If we remove the last cap, and there are
no cap migrations in progress, then there is little hope of us flushing
out that data to the mds (without heroic efforts to reconnect and flush).

So, to avoid leaving inodes pinned (due to dirty state) and crashing after
umount, throw out dirty caps state and unpin the inodes.  Print a warning
to the console so we know something was lost.

NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean;
maybe a truncate should be queued?
Signed-off-by: Sage Weil <sage@newdream.net>

Currently, if our session is closed (due to a timeout, or explicit close,
or whatever), we just sit there doing nothing unless/until the MDS
restarts, at which point we try to reconnect.

Change client to attempt an immediate reconnect if our session is closed.

Note that currently the MDS doesn't support this, and our attempt will
fail.  We'll get a session CLOSE, our caps and dirty cap state will be
dropped, and the client will be free to attempt to reconnect.  That's
clearly not as nice as a successful reconnect, but it at least allows us
to try to carry on, and in the future the MDS will support a reconnect
and we will fare better.
Signed-off-by: Sage Weil <sage@newdream.net>

Pass a ceph_mds_session, since the caller has it.

Remove the dead code for sending empty reconnects.  It used to be used
when the MDS contacted _us_ to solicit a reconnect, and we could reply
saying "go away, I have no session."  Now we only send reconnects based
on the mds map, and only when we do in fact have an open session.
Signed-off-by: Sage Weil <sage@newdream.net>

We used to infer reconnect success by watching the MDS state, essentially
assuming that hearing nothing meant things were ok.  That wasn't
particularly reliable.  Instead, the MDS replies with an explicit OPEN
message to indicate success.

Strictly speaking, this is a protocol change, but it is a backwards
compatible one that does not break new clients + old servers or old
clients + new servers.  At least not yet.

Drop unused @all argument from kick_requests while we're at it.
Signed-off-by: Sage Weil <sage@newdream.net>

On OPENING we shouldn't have any caps (or releases).
On CLOSING, we should wait until we succeed (and throw it all out), or
don't (and are OPEN again).
On RECONNECTING we can wait until we are OPEN.
Signed-off-by: Sage Weil <sage@newdream.net>

If the MDS restarts, the expire caps state is no longer shared, and can be
thrown out.  Caps state will be rebuilt on the MDS during the reconnect
process that follows.  Zero out any release messages and adjust the
release counter accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>

This is being done so that we could reuse the statfs
infrastructure with other requests that return values.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>

The CEPH_FEATURE_NOSRCADDR protocol feature avoids putting the full source
address in each message header (twice).  This patch switches the client to
the new scheme, and _requires_ this feature on the server.  The server
will support both the old and new schemes.  That means an old client will
work with a new server, but a new client will not work with an old server.
Signed-off-by: Sage Weil <sage@newdream.net>

We don't ever use "dirty" so we can remove it.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

The bdi_setup_and_register() helper doesn't help us since we bdi_init() in
create_client() and bdi_register() only when sget() succeeds.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

Reported-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Sage Weil <sage@newdream.net>

Ensure all options are included in /proc/mounts.  Some cleanup.
Signed-off-by: Sage Weil <sage@newdream.net>

We want to assign an offset when the dentry goes from null to linked, which
is always done by splice_dentry().  Notably, we should NOT assign an
offset when a dentry is first created and is still null.

BUG if we try to splice a non-null dentry (we shouldn't).
Signed-off-by: Sage Weil <sage@newdream.net>

This can screw up offsets assigned to new dentries and break dcache
readdir results.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

Set next_offset to 2 (always 2!), not 0, on readdir finish.
Signed-off-by: Sage Weil <sage@newdream.net>

If the version hasn't changed, don't rebuild the index.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>

If we use the xattr_blob, clear the pointer so we don't release the memory
at the bottom of the fuction.
Reported-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>

Simplify messenger locking, and close race between ceph_con_close() setting
the CLOSED bit and con_work() checking the bit, then taking the mutex.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

Free dentry_info in error path.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

Allow the osd reset timeout to be disabled.
Signed-off-by: Sage Weil <sage@newdream.net>

d_obtain_alias() doesn't return NULL, it returns an ERR_PTR().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>

Now that the mount thread waits for the osdmap, it needs
to be awaken.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>

Remove unused #include's in
  fs/ceph/super.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>

Reset out_keepalive_pending and peer_global_seq, and drop unused var.
Signed-off-by: Sage Weil <sage@newdream.net>

We only need to pass in front_len.  Callers can attach any other payload
pieces (middle, data) as they see fit.
Signed-off-by: Sage Weil <sage@newdream.net>

Returning ERR_PTR(-ENOMEM) is useless extra work.  Return NULL on failure
instead, and fix up the callers (about half of which were wrong anyway).
Signed-off-by: Sage Weil <sage@newdream.net>

Since we don't need to maintain large pools of messages, we can just
use the standard mempool_t.  We maintain a msgpool 'wrapper' because we
need the mempool_t* in the alloc function, and mempool gives us only
pool_data.
Signed-off-by: Sage Weil <sage@newdream.net>

ceph_sb_to_client and ceph_client are really identical, we need to dump
one; while function ceph_client is confusing with "struct ceph_client",
ceph_sb_to_client's definition is more clear; so we'd better switch all
call to ceph_sb_to_client.

  -static inline struct ceph_client *ceph_client(struct super_block *sb)
  -{
  -	return sb->s_fs_info;
  -}
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>

Preallocate a single message to reuse instead.
Signed-off-by: Sage Weil <sage@newdream.net>

Preallocate a single reply message that we can reuse instead.
Signed-off-by: Sage Weil <sage@newdream.net>

Avoid unnecessary msgpool.  Preallocate reply.  Fix use-after-free race.
Signed-off-by: Sage Weil <sage@newdream.net>