- 29 Feb, 2012 1 commit
-
-
Benson Leung authored
gmbus_xfer with a single message (particularly a single message write) would set Bus Cycle Select to 100b, the Gen Stop cycle, instead of 101b, No Index, Stop cycle. This would not start single message i2c transactions. Also, gmbus_xfer done: will disable the interface without checking if it is idle. In the case of writes, there will be no wait on status or delay to ensure the write starts and completes before the interface is turned off. Fixed the former issue by using the same cycle selection as used in the I2C_M_RD for the write case. GMBUS_CYCLE_WAIT | (i + 1 == num ? GMBUS_CYCLE_STOP : 0) Fixed the latter by waiting on GMBUS_ACTIVE to deassert before disable. Note from the grumpy d-i-n maintainer: The first hunk that changes the gmbus read path is just cosmetics to align the code with the write path. I.e. the commit message above is slightly lying because the first issue is _only_ with writes (and not simply "particularly"). Signed-off-by:
Benson Leung <bleung@chromium.org> Reviewed-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 27 Feb, 2012 8 commits
-
-
Daniel Vetter authored
gcc seems to get uber-anal recently about these things. Clarification from Dan Carpenter: "Sorry, I should have said that it's not a gcc warning, it's a smatch thing. But also it's not uber-anal. It's the exact level of anality which is required to make the == -1 test work. You can compare unsigned int and longs to -1 and it works but for smaller types it doesn't." Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Chris Wilson authored
This error message has since been superseded by the hangcheck, and does not add any salient information beyond that already printed by hangcheck discovering the GPU hang that lead to i915_wait_request() bombing out in the first place. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Daniel Vetter authored
While fixing up a merge conflict with drm-next I've noticed that we use the same audio drm connector property also for dp and sdvo outputs. So put the new enum to some good use and convert these paths, too. The HDMI_AUDIO_ prefix is a bit a misnomer. But at least for sdvo it makes sense (and you can also connect a hdmi monitor with a dp->hdmi cable), so I've decided to stick with it. Reviewed-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-Off-by:
-
Chris Wilson authored
Retiring requests does not typically free up space in the aperture, so the additional search is pointless. Signed-off-by:
-
Chris Wilson authored
Incrementing the reference count on all objects walked when searching for space in the aperture is a non-neglible amount of overhead. In fact, we only need to hold on to a reference for objects that we will evict, so we can therefore delay the referencing until we find a suitable hole and only add those objects that fall inside. Signed-off-by:
-
Chris Wilson authored
As we warn the user later that we cannot find or load the VBIOS, explaining why is an exercise in debugging. Shouting *ERROR* upsets people and produces bug reports. Reported-by:
Michael Rieder <mr@student.ethz.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43751Signed-off-by:
-
Marc Gariepy authored
Add a no_lvds quirk for the HP t5745 and HP st5747 thin clients dmidecode for those thin clients are attached in thoses bugs: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/911916 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/911920Signed-off-by:
Marc Gariepy <mgariepy@ubuntu.com> Acked-by:
Adam Jackson <ajax@redhat.com> Signed-off-by:
-
Philipp Grete authored
Fixes LP: #796030 by removing forced pipe A on HP 2730p. Quirk has previously been introduced to fix a sleep mode problem that does not exist any more. v2: Added Tested-by and Bugzilla Link Bugzilla: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/796030Tested-by:
Ronny Standtke <ronny.standtke@gmx.net> Signed-off-by:
Philipp Grete <mail@pgrete.de> Signed-off-by:
-
- 23 Feb, 2012 1 commit
-
-
Daniel Vetter authored
Manually resolve the conflict between the new enum drm property helpers in drm-next and the new "force-dvi" option that the "audio" output property gained in drm-intel-next. While resolving this conflict, switch the new drm_prop_enum_list to use the newly introduced enum defines instead of magic values. Conflicts: drivers/gpu/drm/i915/intel_modes.c Signed-Off-by:
-
- 16 Feb, 2012 4 commits
-
-
Dave Airlie authored
For the simple KMS driver case we need some more info about what the preferred depth and if a shadow framebuffer is preferred. I've only added this for intel/radeon which support the dumb ioctls so far. If you need something really fancy you should be writing a real X.org driver. v2: drop cursor information, just return an error from the cursor ioctls and we can make userspace fallback to sw cursor in that case, cursor info was getting too messy, best to start smaller. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
The current enabling of bus mastering in the drm midlayer allows a large race condition under kexec. When a kexec'ed kernel re-enables bus mastering for the GPU, previously setup dma blocks may cause writes to random pieces of memory. On radeon the writeback mechanism can cause these sorts of issues. This patch doesn't fix the problem, but it moves the bus master enable under the individual drivers control so they can move enabling it until later in their load cycle and close the race. Fix for radeon kms driver will be in a follow-up patch. Signed-off-by: -
Danny Kukawka authored
This reverts commit e167976e, Since this was already fixed in commit 3bd3c932 some days before this commit cause seq_file.h to be included twice. Signed-off-by:
Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by:
-
Dan Carpenter authored
We store stuff in texdw[7] so this array needs to have 8 elements. Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
- 15 Feb, 2012 4 commits
-
-
Chris Wilson authored
With the introduction of the PCH, we gained an LVDS presence pin but we continued to use the existing logic that asserted that LVDS was only supported on certain mobile chipsets. However, there are desktop IronLake systems with LVDS attached which we fail to detect. So for PCH, trust the LVDS presence pin and quirk all the lying manufacturers. Tested-by:
Daniel Woff <wolff.daniel@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43171Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
-
Chris Wilson authored
So that we can tally the request against the command sequence in the ringbuffer, or merely jump to the interesting locations. Signed-off-by:
-
Chris Wilson authored
Being able to tally the list of outstanding requests with the sequence of commands in the ringbuffer is often useful evidence with respect to driver corruption. Note that since this is the umpteenth per-ring data structure to be added to the error state, I've coallesced the nearby loops (the ringbuffer and batchbuffer) into a single structure along with the list of requests. A later task would be to refactor the ring register state into the same structure. v2: Fix pretty printing of requests so that they are parsed correctly by intel_error_decode and use the 0x%08x format for seqno for consistency Signed-off-by:
-
Chris Wilson authored
By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by:
-
- 14 Feb, 2012 4 commits
-
-
Paulo Zanoni authored
This was pointed by Jesse Barnes. The code now seems to follow the specification but I don't have an SDVO device to really test this. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-2012-02-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next * tag 'drm-intel-next-2012-02-07' of git://people.freedesktop.org/~danvet/drm-intel: (29 commits) drm/i915: Handle unmappable buffers during error state capture drm/i915: rewrite shmem_pread_slow to use copy_to_user drm/i915: rewrite shmem_pwrite_slow to use copy_from_user drm/i915: fall through pwrite_gtt_slow to the shmem slow path drm/i915: add debugfs file for swizzling information drm/i915: fix swizzle detection for gen3 drm/i915: Remove the upper limit on the bo size for mapping into the CPU domain drm/i915: add per-ring fault reg to error_state drm/i915: reject GTT domain in relocations drm/i915: remove the i915_batchbuffer_info debugfs file drm/i915: capture error_state also for stuck rings drm/i915: refactor debugfs create functions drm/i915: refactor debugfs open function drm/i915: don't trash the gtt when running out of fences drm/i915: Separate fence pin counting from normal bind pin counting drm/i915/ringbuffer: kill snb blt workaround drm/i915: collect more per ring error state drm/i915: refactor ring error state capture to use arrays drm/i915: switch ring->id to be a real id drm/i915: set AUD_CONFIG N_value_index for DisplayPort ...
-
Yufeng Shen authored
GMBUS has several ports and each has it's own corresponding I2C adpater. When multiple I2C adapters call gmbus_xfer() at the same time there is a race condition in using the underlying GMBUS controller. Fixing this by adding a mutex lock when calling gmbus_xfer(). v2: Moved gmbus_mutex below intel_gmbus and added comments. Rebased to drm-intel-next-queued. Signed-off-by:
Yufeng Shen <miletus@chromium.org> [danvet: Shortened the gmbus_mutex comment a bit and add the patch revision comment to the commit message.] Signed-off-by:
-
Wu Fengguang authored
When HDMI-DVI converter is used, it's not only necessary to turn off audio, but also to disable HDMI_MODE_SELECT and video infoframe. Since the DVI mode is mainly tied to audio functionality from end user POV, add a new "force-dvi" audio mode: xrandr --output HDMI1 --set audio force-dvi Note that most users won't need to set this and happily rely on the EDID based DVI auto detection. Reported-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
- 13 Feb, 2012 18 commits
-
-
Sean Paul authored
This patch replaces the locking from the downclock routines with an assert to ensure the registers are indeed unlocked. Without this patch, pre-SNB devices would lock the registers when downclocking which would cause a WARNING on suspend/resume with downclocking enabled. Note: To hit this bug, you need to have lvds downclocking enabled. Signed-off-by:
Sean Paul <seanpaul@chromium.org> Acked-by:
-
Jerome Glisse authored
evergreen and northern island gpu needs more informations for 2D tiling than previous r6xx/r7xx. Add field to tiling ioctl to allow userspace to provide those. The v8 cs checking change to track color view on r6xx/r7xx doesn't affect old userspace as old userspace always emited 0 for this register. v2 fix r6xx/r7xx 2D tiling computation v3 fix r6xx/r7xx height align for untiled surface & add support for tile split on evergreen and newer v4 improve tiling debugging output v5 fix tile split code for evergreen and newer v6 set proper tile split for crtc register v7 fix tile split limit value v8 add COLOR_VIEW checking to r6xx/r7xx checker, add evergreen cs checking, update safe reg for r600, evergreen and cayman. Evergreen checking need some work around for stencil alignment issues v9 fix tile split value range, fix compressed texture handling and mipmap calculation, allow evergreen check to be silencious in front of current broken userspace (depth/stencil alignment issue) v10 fix eg 3d texture and compressed texture, fix r600 depth array, fix r600 color view computation, add support for evergreen stencil split v11 more verbose debugging in some case Signed-off-by: -
Marek Olšák authored
v2: agd5f: add strmout CS checking, copy_dw register checking v3: agd5f: don't use cs_check_reg() for copy_dw checking as it will incorrectly patch the command stream for certain regs. v4: agd5f: add warning if safe reg check fails for copy_dw v5: agd5f: add stricter checking for 6xx/7xx v6: agd5f: add range checking for copy_dw on eg+, add sx_surface_sync to safe reg list for 7xx. v7: agd5f: add stricter checking for eg+ Signed-off-by:
Marek Olšák <maraeo@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Axel Lin authored
The first parameter should be "number of elements" and the second parameter should be "element size". Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Dave Airlie authored
* drm-vmware-next: drm/vmwgfx: Bump driver minor vmwgfx: Move function declaration to correct header drm/vmwgfx: Treat out-of-range initial width and height as host errors vmwgfx: Pick up the initial size from the width and height regs vmwgfx: Add page flip support vmwgfx: Pipe fence out of screen object dirty functions vmwgfx: Make it possible to get fence from execbuf vmwgfx: Clean up pending event references to struct drm_file objects on close vmwgfx: Rework fence event action
-
Thomas Hellstrom authored
Bump driver minor to signal availability of the page-flip ioctl. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
Signed-off-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
And assign the initial width and height to the minimum in that case. Strange values (-1) from these registers have been reported by users. Signed-off-by:
-
Jakob Bornecrantz authored
Signed-off-by:
-
Jakob Bornecrantz authored
Signed-off-by:
-
Jakob Bornecrantz authored
Signed-off-by:
-
Jakob Bornecrantz authored
Signed-off-by:
-
Thomas Hellstrom authored
Pending events may have stale pointer references to struct drm_file objects after a file has been closed, but before the event is supposed to be attached to the drm file. Remove such events on file close. Tested with "modetest". Signed-off-by:
-
Jakob Bornecrantz authored
Signed-off-by:
-
Daniel Vetter authored
CEA actually specifies an interlaced mode with even vtotal and supplies a diagram showing how this is supposed to work. Note that interlaced modes with an even vtotal seem to be a fairly recent invention. All modelines lore I could dig up with googling says that vtotal for interlaced modes _needs_ to be odd. But the even modelines in CEA are not a spec-bug, there's a figure in CEA-861-E called "Figure 5 Special Interlaced Video Format Timing (Even Vtotal)" that explains how it's supposed to work. Furthermore intel Bspec explicitly mentions that both odd and even interlaced vtotal are supported (VTOTAL register in the south display engine of PCH split chips). Acked-by:
-
Daniel Vetter authored
The locking in our setup and teardown paths is rather arbitrary, but generally we try to protect gem stuff with dev->struct_mutex. Further, the ums/gem ioctl to setup gem _does_ take the look. So fix up this benign inconsistency. Notice while reading through code. v2: Rebased on top of the ppgtt code. Reviewed-by:
-
Daniel Vetter authored
We still have reports of missed irqs even on Sandybridge with the HWSTAM workaround in place. Testing by the bug reporter gets rid of them with the forcewake voodoo and no HWSTAM writes. Because I've slightly botched the rebasing I've left out the ACTHD readback which is also required to get IVB working. Seems to still work on the tester's machine, so I think we should go with the more minmal approach on SNB. Especially since I've only found weak evidence for holding forcewake while waiting for an interrupt to arrive, but none for the ACTHD readback. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45332 Tested-by: Nicolas Kalkhof nkalkhof()at()web.de Acked-by:
-
Daniel Vetter authored
Currently we reserve seqnos only when we emit the request to the ring (by bumping dev_priv->next_seqno), but start using it much earlier for ring->oustanding_lazy_request. When 2 threads compete for the gpu and run on two different rings (e.g. ddx on blitter vs. compositor) hilarity ensued, especially when we get constantly interrupted while reserving buffers. Breakage seems to have been introduced in commit 6f392d54 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sat Aug 7 11:01:22 2010 +0100 drm/i915: Use a common seqno for all rings. This patch fixes up the seqno reservation logic by moving it into i915_gem_next_request_seqno. The ring->add_request functions now superflously still return the new seqno through a pointer, that will be refactored in the next patch. Note that with this change we now unconditionally allocate a seqno, even when ->add_request might fail because the rings are full and the gpu died. But this does not open up a new can of worms because we can already leave behind an outstanding_request_seqno if e.g. the caller gets interrupted with a signal while stalling for the gpu in the eviciton paths. And with the bugfix we only ever have one seqno allocated per ring (and only that ring), so there are no ordering issues with multiple outstanding seqnos on the same ring. v2: Keep i915_gem_get_seqno (but move it to i915_gem.c) to make it clear that we only have one seqno counter for all rings. Suggested by Chris Wilson. v3: As suggested by Chris Wilson use i915_gem_next_request_seqno instead of ring->oustanding_lazy_request to make the follow-up refactoring more clearly correct. Also improve the commit message with issues discussed on irc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181 Tested-by: Nicolas Kalkhof nkalkhof()at()web.de Reviewed-by:
-
