- 16 Oct, 2019 7 commits
-
-
Eric Dumazet authored
syzbot found that if __inet_inherit_port() returns an error, we call tcp_done() after inet_csk_prepare_forced_close(), meaning the socket lock is no longer held. We might fix this in a different way in net-next, but for 5.4 it seems safer to relax the lockdep check. Fixes: d983ea6f ("tcp: add rcu protection around tp->fastopen_rsk") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
MarkLee says: ==================== Update MT7629 to support PHYLINK API This patch set has two goals : 1. Fix mt7629 GMII mode issue after apply mediatek PHYLINK support patch. 2. Update mt7629 dts to reflect the latest dt-binding with PHYLINK support. ==================== Signed-off-by: -
MarkLee authored
* Removes mediatek,physpeed property from dtsi that is useless in PHYLINK * Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit. * Set gmac1 to gmii mode that connect to a internal gphy Signed-off-by:
MarkLee <Mark-MC.Lee@mediatek.com> Signed-off-by:
-
MarkLee authored
In the original design, mtk_phy_connect function will set ge_mode=1 if phy-mode is GMII(PHY_INTERFACE_MODE_GMII) and then set the correct ge_mode to ETHSYS_SYSCFG0 register. This logic was broken after apply mediatek PHYLINK patch(Fixes tag), the new mtk_mac_config function will not set ge_mode=1 for GMII mode hence the final ETHSYS_SYSCFG0 setting will be incorrect for mt7629 GMII mode. This patch add the missing logic back to fix it. Fixes: b8fc9f30 ("net: ethernet: mediatek: Add basic PHYLINK support") Signed-off-by:
-
David S. Miller authored
Davide Caratti says: ==================== net/sched: fix wrong behavior of MPLS push/pop action this series contains two fixes for TC 'act_mpls', that try to address two problems that can be observed configuring simple 'push' / 'pop' operations: - patch 1/2 avoids dropping non-MPLS packets that pass through the MPLS 'pop' action. - patch 2/2 fixes corruption of the L2 header that occurs when 'push' or 'pop' actions are configured in TC egress path. v2: - change commit message in patch 1/2 to better describe that the patch impacts only TC, thanks to Simon Horman - fix missing documentation of 'mac_len' in patch 2/2 ==================== Signed-off-by: -
Davide Caratti authored
the following script: # tc qdisc add dev eth0 clsact # tc filter add dev eth0 egress protocol ip matchall \ > action mpls push protocol mpls_uc label 0x355aa bos 1 causes corruption of all IP packets transmitted by eth0. On TC egress, we can't rely on the value of skb->mac_len, because it's 0 and a MPLS 'push' operation will result in an overwrite of the first 4 octets in the packet L2 header (e.g. the Destination Address if eth0 is an Ethernet); the same error pattern is present also in the MPLS 'pop' operation. Fix this error in act_mpls data plane, computing 'mac_len' as the difference between the network header and the mac header (when not at TC ingress), and use it in MPLS 'push'/'pop' core functions. v2: unbreak 'make htmldocs' because of missing documentation of 'mac_len' in skb_mpls_pop(), reported by kbuild test robot CC: Lorenzo Bianconi <lorenzo@kernel.org> Fixes: 2a2ea508 ("net: sched: add mpls manipulation actions to TC") Reviewed-by:Simon Horman <simon.horman@netronome.com> Acked-by:
John Hurley <john.hurley@netronome.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Davide Caratti authored
the following script: # tc qdisc add dev eth0 clsact # tc filter add dev eth0 egress matchall action mpls pop implicitly makes the kernel drop all packets transmitted by eth0, if they don't have a MPLS header. This behavior is uncommon: other encapsulations (like VLAN) just let the packet pass unmodified. Since the result of MPLS 'pop' operation would be the same regardless of the presence / absence of MPLS header(s) in the original packet, we can let skb_mpls_pop() return 0 when dealing with non-MPLS packets. For the OVS use-case, this is acceptable because __ovs_nla_copy_actions() already ensures that MPLS 'pop' operation only occurs with packets having an MPLS Ethernet type (and there are no other callers in current code, so the semantic change should be ok). v2: better documentation of use-cases for skb_mpls_pop(), thanks to Simon Horman Fixes: 2a2ea508 ("net: sched: add mpls manipulation actions to TC") Reviewed-by:
-
- 15 Oct, 2019 12 commits
-
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header files related to Cavium Ethernet drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by:
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header files related to Distributed Switch Architecture drivers for Microchip KSZ series switch support. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by:
-
Randy Dunlap authored
NET_VENDOR_BROADCOM is intended to control a kconfig menu only. It should not have anything to do with code generation. As such, it should not select DIMLIB for all drivers under NET_VENDOR_BROADCOM. Instead each driver that needs DIMLIB should select it (being the symbols SYSTEMPORT, BNXT, and BCMGENET). Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907021810220.13058@ramsan.of.borg/ Fixes: 4f75da36 ("linux/dim: Move implementation to .c files") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Tal Gilboa <talgi@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: netdev@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
David Ahern authored
Use my kernel.org address for all entries in MAINTAINERS. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Florian Fainelli authored
phydev->dev_flags is entirely dependent on the PHY device driver which is going to be used, setting the internal GENET PHY revision in those bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver being used. Fixes: 487320c5 ("net: bcmgenet: communicate integrated PHY revision to PHY driver") Signed-off-by:
Doug Berger <opendmb@gmail.com> Signed-off-by:
-
Mahesh Bandewar authored
While invalidating the dst, we assign backhole_netdev instead of loopback device. However, this device does not have idev pointer and hence no ip6_ptr even if IPv6 is enabled. Possibly this has triggered the syzbot reported crash. The syzbot report does not have reproducer, however, this is the only device that doesn't have matching idev created. Crash instruction is : static inline bool ip6_ignore_linkdown(const struct net_device *dev) { const struct inet6_dev *idev = __in6_dev_get(dev); return !!idev->cnf.ignore_routes_with_linkdown; <= crash } Also ipv6 always assumes presence of idev and never checks for it being NULL (as does the above referenced code). So adding a idev for the blackhole_netdev to avoid this class of crashes in the future. Signed-off-by: -
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2019-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.4 Second set of fixes for 5.4. ath10k regression and iwlwifi BAD_COMMAND bug are the ones getting most reports at the moment. ath10k * fix throughput regression on QCA98XX iwlwifi * fix initialization of 3168 devices (the infamous BAD_COMMAND bug) * other smaller fixes rt2x00 * don't include input-polldev.h header * fix hw reset to work during first 5 minutes of system run ==================== Signed-off-by:
-
David S. Miller authored
Igor Russkikh says: ==================== Aquantia/Marvell AQtion atlantic driver fixes 10/2019 Here is a set of various bugfixes, to be considered for stable as well. V2: double space removed ==================== Signed-off-by: -
Dmitry Bogdanov authored
macvlan and multicast handling is now mixed up. The explicit issue is that macvlan interface gets broken (no traffic) after clearing MULTICAST flag on the real interface. We now do separate logic and consider both ALLMULTI and MULTICAST flags on the device. Fixes: 11ba961c ("net: aquantia: Fix IFF_ALLMULTI flag functionality") Signed-off-by:
Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Dmitry Bogdanov authored
Individual descriptors on LRO TCP session should be checked for CRC errors. It was discovered that HW recalculates L4 checksums on LRO session and does not break it up on bad L4 csum. Thus, driver should aggregate HW LRO L4 statuses from all individual buffers of LRO session and drop packet if one of the buffers has bad L4 checksum. Fixes: f38f1ee8 ("net: aquantia: check rx csum for all packets in LRO session") Signed-off-by:
-
Igor Russkikh authored
>From HW specification to correctly reset HW caches (this is a required workaround when stopping the device), register bit should actually be toggled. It was previosly always just set. Due to the way driver stops HW this never actually caused any issues, but it still may, so cleaning this up. Fixes: 7a1bb494 ("net: aquantia: fix potential IOMMU fault after driver unbind") Signed-off-by:
-
Igor Russkikh authored
Chip temperature is a two byte word, colocated internally with cable length data. We do all readouts from HW memory by dwords, thus we should clear extra high bytes, otherwise temperature output gets weird as soon as we attach a cable to the NIC. Fixes: 8f894011 ("net: aquantia: add infrastructure to readout chip temperature") Tested-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by:
-
- 14 Oct, 2019 1 commit
-
-
Miaoqing Pan authored
(kvalo: cherry picked from commit 1340cc63 in wireless-drivers-next to wireless-drivers as this a frequently reported regression) Bad latency is found on QCA988x, the issue was introduced by commit 4504f0e5 ("ath10k: sdio: workaround firmware UART pin configuration bug"). If uart_pin_workaround is false, this change will set uart pin even if uart_print is false. Tested HW: QCA9880 Tested FW: 10.2.4-1.0-00037 Fixes: 4504f0e5 ("ath10k: sdio: workaround firmware UART pin configuration bug") Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
- 13 Oct, 2019 13 commits
-
-
YueHaibing authored
In nsim_fib_init(), if register_fib_notifier failed, nsim_fib_net_ops should be unregistered before return. In nsim_fib_exit(), unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free: BUG: KASAN: use-after-free in nsim_fib_event_nb+0x342/0x570 [netdevsim] Read of size 8 at addr ffff8881daaf4388 by task kworker/0:3/3499 CPU: 0 PID: 3499 Comm: kworker/0:3 Not tainted 5.3.0-rc7+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work [ipv6] Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 print_address_description+0x65/0x380 mm/kasan/report.c:351 __kasan_report+0x149/0x18d mm/kasan/report.c:482 kasan_report+0xe/0x20 mm/kasan/common.c:618 nsim_fib_event_nb+0x342/0x570 [netdevsim] notifier_call_chain+0x52/0xf0 kernel/notifier.c:95 __atomic_notifier_call_chain+0x78/0x140 kernel/notifier.c:185 call_fib_notifiers+0x30/0x60 net/core/fib_notifier.c:30 call_fib6_entry_notifiers+0xc1/0x100 [ipv6] fib6_add+0x92e/0x1b10 [ipv6] __ip6_ins_rt+0x40/0x60 [ipv6] ip6_ins_rt+0x84/0xb0 [ipv6] __ipv6_ifa_notify+0x4b6/0x550 [ipv6] ipv6_ifa_notify+0xa5/0x180 [ipv6] addrconf_dad_completed+0xca/0x640 [ipv6] addrconf_dad_work+0x296/0x960 [ipv6] process_one_work+0x5c0/0xc00 kernel/workqueue.c:2269 worker_thread+0x5c/0x670 kernel/workqueue.c:2415 kthread+0x1d7/0x200 kernel/kthread.c:255 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Allocated by task 3388: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:493 kmalloc include/linux/slab.h:557 [inline] kzalloc include/linux/slab.h:748 [inline] ops_init+0xa9/0x220 net/core/net_namespace.c:127 __register_pernet_operations net/core/net_namespace.c:1135 [inline] register_pernet_operations+0x1d4/0x420 net/core/net_namespace.c:1212 register_pernet_subsys+0x24/0x40 net/core/net_namespace.c:1253 nsim_fib_init+0x12/0x70 [netdevsim] veth_get_link_ksettings+0x2b/0x50 [veth] do_one_initcall+0xd4/0x454 init/main.c:939 do_init_module+0xe0/0x330 kernel/module.c:3490 load_module+0x3c2f/0x4620 kernel/module.c:3841 __do_sys_finit_module+0x163/0x190 kernel/module.c:3931 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3534: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1474 [inline] slab_free mm/slub.c:3016 [inline] kfree+0xe9/0x2d0 mm/slub.c:3957 ops_free net/core/net_namespace.c:151 [inline] ops_free_list.part.7+0x156/0x220 net/core/net_namespace.c:184 ops_free_list net/core/net_namespace.c:182 [inline] __unregister_pernet_operations net/core/net_namespace.c:1165 [inline] unregister_pernet_operations+0x221/0x2a0 net/core/net_namespace.c:1224 unregister_pernet_subsys+0x1d/0x30 net/core/net_namespace.c:1271 nsim_fib_exit+0x11/0x20 [netdevsim] nsim_module_exit+0x16/0x21 [netdevsim] __do_sys_delete_module kernel/module.c:1015 [inline] __se_sys_delete_module kernel/module.c:958 [inline] __x64_sys_delete_module+0x244/0x330 kernel/module.c:958 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 59c84b9f ("netdevsim: Restore per-network namespace accounting for fib entries") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Cédric Le Goater authored
pSeries machines on POWER9 processors can run with the XICS (legacy) interrupt mode or with the XIVE exploitation interrupt mode. These interrupt contollers have different interfaces for interrupt management : XICS uses hcalls and XIVE loads and stores on a page. H_EOI being a XICS interface the enable_scrq_irq() routine can fail when the machine runs in XIVE mode. Fix that by calling the EOI handler of the interrupt chip. Fixes: f23e0643 ("ibmvnic: Clear pending interrupt after device reset") Signed-off-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
-
Alexandre Belloni authored
__lpc_eth_shutdown is called after __lpc_eth_reset but it is already calling __lpc_eth_reset. Avoid resetting the IP twice. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: address KCSAN reports in tcp_poll() (part I) This all started with a KCSAN report (included in "tcp: annotate tp->rcv_nxt lockless reads" changelog) tcp_poll() runs in a lockless way. This means that about all accesses of tcp socket fields done in tcp_poll() context need annotations otherwise KCSAN will complain about data-races. While doing this detective work, I found a more serious bug, addressed by the first patch ("tcp: add rcu protection around tp->fastopen_rsk"). ==================== Signed-off-by: -
Eric Dumazet authored
For the sake of tcp_poll(), there are few places where we fetch sk->sk_wmem_queued while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. sk_wmem_queued_add() helper is added so that we can in the future convert to ADD_ONCE() or equivalent if/when available. Signed-off-by:
-
Eric Dumazet authored
For the sake of tcp_poll(), there are few places where we fetch sk->sk_sndbuf while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that other transports probably need similar fixes. Signed-off-by:
-
Eric Dumazet authored
For the sake of tcp_poll(), there are few places where we fetch sk->sk_rcvbuf while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that other transports probably need similar fixes. Signed-off-by:
-
Eric Dumazet authored
There two places where we fetch tp->urg_seq while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write side use corresponding WRITE_ONCE() to avoid store-tearing. Signed-off-by:
-
Eric Dumazet authored
There are few places where we fetch tp->snd_nxt while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Signed-off-by:
-
Eric Dumazet authored
There are few places where we fetch tp->write_seq while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Signed-off-by:
-
Eric Dumazet authored
There are few places where we fetch tp->copied_seq while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that tcp_inq_hint() was already using READ_ONCE(tp->copied_seq) Signed-off-by:
-
Eric Dumazet authored
There are few places where we fetch tp->rcv_nxt while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that tcp_inq_hint() was already using READ_ONCE(tp->rcv_nxt) syzbot reported : BUG: KCSAN: data-race in tcp_poll / tcp_queue_rcv write to 0xffff888120425770 of 4 bytes by interrupt on cpu 0: tcp_rcv_nxt_update net/ipv4/tcp_input.c:3365 [inline] tcp_queue_rcv+0x180/0x380 net/ipv4/tcp_input.c:4638 tcp_rcv_established+0xbf1/0xf50 net/ipv4/tcp_input.c:5616 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1542 tcp_v4_rcv+0x1a03/0x1bf0 net/ipv4/tcp_ipv4.c:1923 ip_protocol_deliver_rcu+0x51/0x470 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5004 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5118 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5208 napi_skb_finish net/core/dev.c:5671 [inline] napi_gro_receive+0x28f/0x330 net/core/dev.c:5704 receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061 read to 0xffff888120425770 of 4 bytes by task 7254 on cpu 1: tcp_stream_is_readable net/ipv4/tcp.c:480 [inline] tcp_poll+0x204/0x6b0 net/ipv4/tcp.c:554 sock_poll+0xed/0x250 net/socket.c:1256 vfs_poll include/linux/poll.h:90 [inline] ep_item_poll.isra.0+0x90/0x190 fs/eventpoll.c:892 ep_send_events_proc+0x113/0x5c0 fs/eventpoll.c:1749 ep_scan_ready_list.constprop.0+0x189/0x500 fs/eventpoll.c:704 ep_send_events fs/eventpoll.c:1793 [inline] ep_poll+0xe3/0x900 fs/eventpoll.c:1930 do_epoll_wait+0x162/0x180 fs/eventpoll.c:2294 __do_sys_epoll_pwait fs/eventpoll.c:2325 [inline] __se_sys_epoll_pwait fs/eventpoll.c:2311 [inline] __x64_sys_epoll_pwait+0xcd/0x170 fs/eventpoll.c:2311 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 7254 Comm: syz-fuzzer Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
-
Eric Dumazet authored
Both tcp_v4_err() and tcp_v6_err() do the following operations while they do not own the socket lock : fastopen = tp->fastopen_rsk; snd_una = fastopen ? tcp_rsk(fastopen)->snt_isn : tp->snd_una; The problem is that without appropriate barrier, the compiler might reload tp->fastopen_rsk and trigger a NULL deref. request sockets are protected by RCU, we can simply add the missing annotations and barriers to solve the issue. Fixes: 168a8f58 ("tcp: TCP Fast Open Server - main code path") Signed-off-by:
-
- 12 Oct, 2019 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2019-10-12 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) a bunch of small fixes. Nothing critical. ==================== Signed-off-by: -
David Howells authored
If an ICMP packet comes in on the UDP socket backing an AF_RXRPC socket as the UDP socket is being shut down, rxrpc_error_report() may get called to deal with it after sk_user_data on the UDP socket has been cleared, leading to a NULL pointer access when this local endpoint record gets accessed. Fix this by just returning immediately if sk_user_data was NULL. The oops looks like the following: #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... RIP: 0010:rxrpc_error_report+0x1bd/0x6a9 ... Call Trace: ? sock_queue_err_skb+0xbd/0xde ? __udp4_lib_err+0x313/0x34d __udp4_lib_err+0x313/0x34d icmp_unreach+0x1ee/0x207 icmp_rcv+0x25b/0x28f ip_protocol_deliver_rcu+0x95/0x10e ip_local_deliver+0xe9/0x148 __netif_receive_skb_one_core+0x52/0x6e process_backlog+0xdc/0x177 net_rx_action+0xf9/0x270 __do_softirq+0x1b6/0x39a ? smpboot_register_percpu_thread+0xce/0xce run_ksoftirqd+0x1d/0x42 smpboot_thread_fn+0x19e/0x1b3 kthread+0xf1/0xf6 ? kthread_delayed_work_timer_fn+0x83/0x83 ret_from_fork+0x24/0x30 Fixes: 17926a79 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Reported-by: syzbot+611164843bd48cc2190c@syzkaller.appspotmail.com Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
- 11 Oct, 2019 4 commits
-
-
Jakub Kicinski authored
Karsten Graul says: ==================== Fixes for -net, addressing two races in SMC receive path and add a missing cleanup when the link group creating fails with ISM devices and a VLAN id. ==================== Signed-off-by: -
Karsten Graul authored
smc_rx_recvmsg() first checks if data is available, and then if RCV_SHUTDOWN is set. There is a race when smc_cdc_msg_recv_action() runs in between these 2 checks, receives data and sets RCV_SHUTDOWN. In that case smc_rx_recvmsg() would return from receive without to process the available data. Fix that with a final check for data available if RCV_SHUTDOWN is set. Move the check for data into a function and call it twice. And use the existing helper smc_rx_data_available(). Fixes: 952310cc ("smc: receive data from RMBE") Reviewed-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
smc_cdc_rxed_any_close_or_senddone() is used as an end condition for the receive loop. This conflicts with smc_cdc_msg_recv_action() which could run in parallel and set the bits checked by smc_cdc_rxed_any_close_or_senddone() before the receive is processed. In that case we could return from receive with no data, although data is available. The same applies to smc_rx_wait(). Fix this by checking for RCV_SHUTDOWN only, which is set in smc_cdc_msg_recv_action() after the receive was actually processed. Fixes: 952310cc ("smc: receive data from RMBE") Reviewed-by:
-
Ursula Braun authored
If creation of an SMCD link group with VLAN id fails, the initial smc_ism_get_vlan() step has to be reverted as well. Fixes: c6ba7c9b ("net/smc: add base infrastructure for SMC-D and ISM") Signed-off-by:
-
- 10 Oct, 2019 1 commit
-
-
Jacob Keller authored
Commit 8960b389 ("linux/dim: Rename externally used net_dim members") renamed the net_dim API, removing the "net_" prefix from the structures and functions. The patch didn't update the net_dim.txt documentation file. Fix the documentation so that its examples match the current code. Fixes: 8960b389 ("linux/dim: Rename externally used net_dim members", 2019-06-25) Fixes: c002bd52 ("linux/dim: Rename externally exposed macros", 2019-06-25) Fixes: 4f75da36 ("linux/dim: Move implementation to .c files") Cc: Tal Gilboa <talgi@mellanox.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
