- 22 Jul, 2021 7 commits
-
-
Vijendar Mukunda authored
This patch adds ACP5x PCM driver DMA operations. Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20210721180430.11571-8-Vijendar.Mukunda@amd.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Vijendar Mukunda authored
Whenever audio data equal to the I2S FIFO watermark level are produced/consumed, interrupt is generated. Acknowledge the interrupt. Reviewed-by:
-
Vijendar Mukunda authored
PCM platform driver binds to the platform device created by ACP5x PCI device. PCM driver registers ALSA DMA components with ASoC framework. Reviewed-by:
-
Vijendar Mukunda authored
ACP5.x IP has multiple I2S controllers and DMA controller. Create platform devices for I2S HS controller instance, I2S SP controller instance and DMA controller. Pass PCI resources like MMIO, irq to these platform devices. Reviewed-by:
-
Vijendar Mukunda authored
Add Vangogh ACP PCI driver init/deinit functions. Reviewed-by:
-
Vijendar Mukunda authored
ACP is a PCI audio device. This patch adds PCI driver to bind to this device and get PCI resources. Reviewed-by:
-
Vijendar Mukunda authored
Add register header for ACP5x IP in Vangogh platform. Reviewed-by:
-
- 20 Jul, 2021 1 commit
-
-
Pierre-Louis Bossart authored
The same quirk is used for LAPBC510 and LAPBC710 skews who use the same audio design, with an RT711 headset codec using JD1 mode and one RT1308 amplifier, along with 4 DMICs. BugLink: https://github.com/thesofproject/linux/issues/3049Signed-off-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Link: https://lore.kernel.org/r/20210719233248.557923-3-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
- 19 Jul, 2021 1 commit
-
-
Peter Ujfalusi authored
Convert the J721E_AUDIO_DOMAIN_* from defines to enum to make it possible to extend the number of domains in the future. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210717122820.1467-4-peter.ujfalusi@gmail.comSigned-off-by:
-
- 16 Jul, 2021 1 commit
-
-
Srinivas Kandagatla authored
port_map field was added prior to adding static port map support in soundwire. This makes port_map array in struct wcd938x_sdw_priv redundant and unused, so remove this. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210716105612.5284-1-srinivas.kandagatla@linaro.orgSigned-off-by:
-
- 15 Jul, 2021 1 commit
-
-
Colin Ian King authored
The for-loop is not indented enough and needs one more level of indentation. Add in the indentation across the block of code. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210709152424.460446-1-colin.king@canonical.comSigned-off-by:
-
- 14 Jul, 2021 12 commits
-
-
Mark Brown authored
Merge series "soundwire/ASoC: add mockup codec support" from Bard Liao <yung-chuan.liao@linux.intel.com>: Adding mockup SoundWire codec is useful to debug driver/topology changes without having any actual device connected. Bard Liao (2): soundwire: stream: don't abort bank switch on Command_Ignored/-ENODATA soundwire: stream: don't program mockup device ports Pierre-Louis Bossart (8): ASoC: codecs: add SoundWire mockup device support ASoC: soc-acpi: cnl: add table for SoundWire mockup devices ASoC: soc-acpi: tgl: add table for SoundWire mockup devices ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests soundwire: add flag to ignore all command/control for mockup devices soundwire: bus: squelch error returned by mockup devices soundwire: cadence: add debugfs interface for PDI loopbacks soundwire: cadence: override PDI configurations to create loopback drivers/soundwire/bus.c | 10 +- drivers/soundwire/cadence_master.c | 174 ++++++++-- drivers/soundwire/cadence_master.h | 3 + drivers/soundwire/stream.c | 5 +- include/linux/soundwire/sdw.h | 3 + sound/soc/codecs/Kconfig | 18 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/sdw-mockup.c | 312 ++++++++++++++++++ sound/soc/intel/boards/Kconfig | 1 + sound/soc/intel/boards/sof_sdw.c | 41 +++ sound/soc/intel/common/Makefile | 3 +- .../intel/common/soc-acpi-intel-cnl-match.c | 15 + .../common/soc-acpi-intel-sdw-mockup-match.c | 166 ++++++++++ .../common/soc-acpi-intel-sdw-mockup-match.h | 17 + .../intel/common/soc-acpi-intel-tgl-match.c | 23 ++ 15 files changed, 754 insertions(+), 39 deletions(-) create mode 100644 sound/soc/codecs/sdw-mockup.c create mode 100644 sound/soc/intel/common/soc-acpi-intel-sdw-mockup-match.c create mode 100644 sound/soc/intel/common/soc-acpi-intel-sdw-mockup-match.h base-commit: e73f0f0e -- 2.17.1
-
Pierre-Louis Bossart authored
Add support for SoundWire mockup devices. The configurations assume the same topology as the CML SoundWire devices and can be used to test the SOF firmware on a development board (RVP, UpExtreme) without any hardware connected. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210714032209.11284-5-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Follow the same idea as for CNL/UpExtreme and add mockup test first. They will only be selected if the SSDT is modified to add such mockup devices. Signed-off-by:
-
Pierre-Louis Bossart authored
Add support for two configurations with SoundWire mockup devices that emulate the two CometLake configurations with one and two amps. This patch helps test the SOF firmware on an UpExtreme board without any hardware connected, e.g. by doing a loopback of the playback stream on capture streams. The mapping of the partIDs is as follows: 0xAAAA: generic full-duplex codec (not currently used) 0xAA55: headset codec (mock-up of RT711/RT5682) - full-duplex 0x55AA: amplifier (mock-up of RT1308/RT1316/Maxim 98373) - playback with IV sense feedback 0x5555: mic codec (mock-up of RT715) - capture-only The tables are added in a separate file to allow for mockup codecs to be added on other platforms, but the mapping to specific topologies remains platform-specific. Signed-off-by:
-
Pierre-Louis Bossart authored
To test the host controller and bus management code, it is currently required to have a physical SoundWire peripheral attached to the bus. To help with pre-silicon or early hardware enablement, it would be very useful to have a SoundWire 'mockup' device that is exposed in platform firmware but does not drive any signal on the bus. This is different to the existing ASoC 'dummy' codec uses for I2S/TDM, the SoundWire spec makes it clear that a device that is not attached to the bus is not permitted to interact with the bus, be it for command/control or data. This patch exposes a 'mockup' device, with a minimalist driver, with 4 partID values reserved by Intel for such test configurations. The mockup device exposes one full-duplex DAI based on 2 ports (DP1 for playback and DP8 for capture). The capture data port is just virtual, such a mockup device is prevented by the SoundWire specification from presenting any data generated by a Source port without being Attached. All the callbacks exposed by the SoundWire Slave interface are populated, even if they just return immediately. This is intentional to describe what a minimal codec driver should do and implement and help new codec vendors provide support for their devices. Signed-off-by:
-
jairaj arava authored
ADL RVP uses different circuits for jack detection, hence adding external resister 100k mode. Reviewed-by:
jairaj arava <jairaj.arava@intel.com> Signed-off-by:
Sathya Prakash M R <sathya.prakash.m.r@intel.com> Signed-off-by:
-
Bard Liao authored
We don't need to redefine enum rt711_jd_src. Reviewed-by:
-
Bard Liao authored
commit 683b0df2 ("ASoC: rt711: add two jack detection modes") added two jack detection modes. Rt711 has 4 JD modes now. Reserve 4 bits in case rt711 adds more JD modes in the future. Reviewed-by:
-
Brent Lu authored
Refactor the machine driver by using the common code in maxim-common module to support max98360a. Reviewed-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
-
Brent Lu authored
This patch adds driver data for jsl_cs4242_mx98360a which supports two max98360a speaker amplifiers on SSP1 and cs42l42 headphone codec on SSP0 running on JSL platform. Reviewed-by:
-
Brent Lu authored
Move max98360a code to this common module so it could be shared between multiple SOF machine drivers. MAX98357A and MAX98360A are sharing same codec driver so here we also share some function and structures. Reviewed-by:
-
Brent Lu authored
Currently there are two types of DAI Link sequences defined in topology files, one starts from speaker link and the other starts from headphone link. Type 1: SPK - HP - DMIC - HDMI Type 2: HP - DMIC - HDMI - SPK Here we add a macro SOF_CS42L42_DAILINK to define the DAI Link sequence in quirk and refactor the sof_card_dai_links_create() function to support arbitrary DAI Link sequence. Reviewed-by:
-
- 12 Jul, 2021 3 commits
-
-
Mark Brown authored
Merge series "ASoC: ti: davinci-mcasp: Fix the DIT mode and OMAP4 support" from Peter Ujfalusi <peter.ujfalusi@gmail.com>: Hi, Changes since v1: - Do not calculat that we allow one serializer in DIT mode, just set the max_active_serializers to 1. Reported-by:kernel test robot <lkp@intel.com> it has been on my todo list for several years to support McASP on OMAP4 devices. For Galaxy Nexus we had an omap-mcasp driver (which was mostly a stripped down davinci-mcasp driver) to support what was needed on that specific phone + it's dock for S/PDIF (48KHz, 16bit, stereo). Not many (if any) device available to test the DIT mode of McASP. I have used BeagleBone White (McASP1 AXR3 can be routed to a pin) to get the S/PDIF mode working then PandaES for OMAP4 support (on PandaES the gpio_121 is not used and the signal is routed to expansion J6 pin14). In theory the McASP in OMAP5 should be working after this series, but the OMAP5 TRM is not public and I do not have one to check the addresses and see if there is a way to test it on omap5-uevm. Mark, Tony: The ASoC and dts patches can go via separate tree I felt that it is better if they are together, at least initially. Nikolaus: fyi, this might be useful for Pyra? Regards, Péter --- Peter Ujfalusi (5): ASoC: ti: davinci-mcasp: Fix DIT mode support ASoC: dt-bindings: davinci-mcasp: Add compatible string for OMAP4 ASoC: ti: davinci-mcasp: Add support for the OMAP4 version of McASP ARM: dts: omap4-l4-abe: Correct sidle modes for McASP ARM: dts: omap4-l4-abe: Add McASP configuration .../bindings/sound/davinci-mcasp-audio.txt | 1 + arch/arm/boot/dts/omap4-l4-abe.dtsi | 39 ++-- include/linux/platform_data/davinci_asp.h | 1 + sound/soc/ti/Kconfig | 1 + sound/soc/ti/davinci-mcasp.c | 176 +++++++++++++++--- 5 files changed, 175 insertions(+), 43 deletions(-) -- 2.32.0
-
Mark Brown authored
Merge series "Fix unbalanced pm_runtime_enable in error handle" from Zhang Qilong <zhangqilong3@huawei.com>: This two patches fixed the unbalanced PM disable depth. It could avoid pm_runtime implementation complains when removing and probing again the driver. Zhang Qilong (2): ASoC: mediatek: mt8192:Fix Unbalanced pm_runtime_enable in mt8192_afe_pcm_dev_probe ASoC: mediatek: mt8183: Fix Unbalanced pm_runtime_enable in mt8183_afe_pcm_dev_probe sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 43 ++++++++++++++-------- sound/soc/mediatek/mt8192/mt8192-afe-pcm.c | 27 +++++++++----- 2 files changed, 44 insertions(+), 26 deletions(-) -- 2.31.1 -
Mark Brown authored
Merge series "ASoC: Intel: machine driver corrections" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: The first fix solves an underflow in SoundWire platforms using the max98373 amplifier, the rest of the patches are minor corrections in machine drivers. The fix should be queued for the 5.14 cycle, the rest should be harmless but can be deferred for 5.15 if it's too late already. Brent Lu (2): ASoC: SOF: add a helper to get topology configured bclk ASoC: Intel: sof_cs42l42: use helper function to get bclk frequency Gongjun Song (1): ASoC: Intel: soc-acpi: add support for SoundWire of TGL-H-RVP Rander Wang (1): ASoC: Intel: boards: fix xrun issue on platform with max98373 include/sound/sof.h | 1 + sound/soc/intel/boards/sof_cs42l42.c | 8 +- sound/soc/intel/boards/sof_sdw_max98373.c | 81 ++++++++++++------- .../intel/common/soc-acpi-intel-tgl-match.c | 15 ++++ sound/soc/sof/sof-audio.c | 42 ++++++++-- 5 files changed, 111 insertions(+), 36 deletions(-) -- 2.25.1
-
- 11 Jul, 2021 14 commits
-
-
Gu Shengxian authored
Fix some spelling mistakes as follows: descritor ==> descriptor descriptore ==> descriptor contiguos ==> contiguous initiailize ==> initialize descriptiors ==> descriptor Signed-off-by:
Gu Shengxian <gushengxian@yulong.com> Link: https://lore.kernel.org/r/20210706064207.672491-1-gushengxian507419@gmail.comSigned-off-by:
-
Marek Vasut authored
The TAS2505/TAS2521 does support up to two channels, LEFT and RIGHT, which are being alternated on the audio data bus by Word Clock, WCLK. This is documented in TI slau472 2.7.1 Digital Audio Interface. Note that both the LEFT and RIGHT channels are only used for audio INPUT, while only the LEFT channel is used for audio OUTPUT. Fixes: b4525b61 ("ASoC: tlv320aic32x4: add support for TAS2505") Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Claudius Heine <ch@denx.de> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210708091229.56443-1-marex@denx.deSigned-off-by:
-
Tang Bin authored
In the function fsl_xcvr__probe(), when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210624104505.13680-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
Wolfram Sang authored
dmaengine_terminate_all() is deprecated in favor of explicitly saying if it should be sync or async. Here, we want dmaengine_terminate_sync() because there is no other synchronization code in the driver to handle an async case. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210623100545.3926-1-wsa+renesas@sang-engineering.comSigned-off-by:
-
Charles Keepax authored
The control fw_name is always directly assigned from the wm_adsp_fw_text array, so it isn't necessary to compare the actual strings just the pointer values. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210626155941.12251-3-ckeepax@opensource.cirrus.comSigned-off-by:
-
kernel test robot authored
sound/soc/codecs/wcd938x.c:1628:5-8: Unneeded variable: "ret". Return "0" on line 1656 sound/soc/codecs/wcd938x.c:1871:5-8: Unneeded variable: "ret". Return "0" on line 1907 Remove unneeded variable used to store return value. Generated by: scripts/coccinelle/misc/returnvar.cocci Fixes: 04544222 ("ASoC: codecs: wcd938x: add audio routing and Kconfig") CC: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reported-by:
Souptick Joarder <jrdr.linux@gmail.com> Link: https://lore.kernel.org/r/20210629132909.GA7935@233d919f385fSigned-off-by:
-
Randy Dunlap authored
On a config (such as arch/sh/) which does not set HAS_DMA when MMU is not set, several ATMEL ASoC drivers select symbols that cause kconfig warnings. There is one "depends on HAS_DMA" which is no longer needed. Dropping it eliminates the kconfig warnings and still builds with no problems reported. Fix the following kconfig warnings: WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_PDC Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && HAS_DMA [=n] Selected by [m]: - SND_ATMEL_SOC_SSC [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] - SND_ATMEL_SOC_SSC_PDC [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m] WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC_PDC Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m] && HAS_DMA [=n] Selected by [m]: - SND_AT91_SOC_SAM9G20_WM8731 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && SND_SOC_I2C_AND_SPI [=m] WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && HAS_DMA [=n] Selected by [m]: - SND_ATMEL_SOC_SSC_DMA [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m] WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC_DMA Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m] && HAS_DMA [=n] Selected by [m]: - SND_ATMEL_SOC_WM8904 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && I2C [=m] - SND_AT91_SOC_SAM9X5_WM8731 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && SND_SOC_I2C_AND_SPI [=m] Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707214752.3831-1-rdunlap@infradead.orgSigned-off-by:
-
Dan Carpenter authored
This code checks "priv->mclk_freq" twice and the second check is not required. The code is left over from when removed support for legacy boot. Fixes: 8fe120b5 ("ASoC: omap-abe-twl6040: Remove support for pdata (legacy boot)") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Gu Shengxian authored
Fix some spelling mistakes as follows: regaedles ==> regardless prezent ==> present underrrun ==> underrun controlls ==> controls Signed-off-by:
-
Brent Lu authored
Use sof_dai_get_bclk() function to get bclk frequency instead of a hard-coded magic number depending on configuration in topology. Reviewed-by:
-
Brent Lu authored
Add helper function sof_dai_ssp_bclk() to get the BCLK frequency configured by topology. Reviewed-by:
-
Gongjun Song authored
snd_soc_acpi_intel_tgl_sdw_machines structure array does not contain the configuration information of TGL-H-RVP, which results in the inability to enable soundwire on the TGL-H-RVP platform. Add the corresponding configuration information to enable soundwire on the TGL-H-RVP platform. Reviewed-by:
Gongjun Song <gongjun.song@intel.com> Signed-off-by:
-
Zhang Qilong authored
Add missing pm_runtime_disable() when probe error out. It could avoid pm_runtime implementation complains when removing and probing again the driver. Fixes:a94aec03 ("ASoC: mediatek: mt8183: add platform driver") Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20210618141104.105047-3-zhangqilong3@huawei.comSigned-off-by:
-
Zhang Qilong authored
Add missing pm_runtime_disable() when probe error out. It could avoid pm_runtime implementation complains when removing and probing again the driver. Fixes:125ab5d5 ("ASoC: mediatek: mt8192: add platform driver") Signed-off-by:
-
