- 31 Jul, 2017 40 commits
-
-
Devin Heitmueller authored
[ Upstream commit 6836796d ] The USB core and sysfs will attempt to enumerate certain parameters which are unsupported by the au0828 - causing inconsistent behavior and sometimes causing the chip to reset. Avoid making these calls. This problem manifested as intermittent cases where the au8522 would be reset on analog video startup, in particular when starting up ALSA audio streaming in parallel - the sysfs entries created by snd-usb-audio on streaming startup would result in unsupported control messages being sent during tuning which would put the chip into an unknown state. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Jeremie Rapin authored
[ Upstream commit fd90f73a ] Added the USB serial device ID for the CEL ZigBee EM3588 radio stick. Signed-off-by:
Jeremie Rapin <rapinj@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 04fb365c ] %p will leak kernel pointers, so let's not expose the information on dmesg and instead use %pK. %pK will only show the actual addresses if explicitly enabled under /proc/sys/kernel/kptr_restrict. Cc: <stable@vger.kernel.org> Acked-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 9e52b325 ] Always try to parse an address, since kstrtoul() will safely fail when given a symbol as input. If that fails (which will be the case for a symbol), try to parse a symbol instead. This allows creating a probe such as: p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0 Which is necessary for this command to work: perf probe -m 8021q -a vlan_gro_receive Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net Cc: stable@vger.kernel.org Fixes: 413d37d1 ("tracing: Add kprobe-based event tracer") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Rafał Miłecki authored
[ Upstream commit b4dfd8e9 ] This fixes Ethernet on D-Link DIR-885L with BCM47094 SoC. Felix reported similar fix was needed for his BCM4709 device (Buffalo WXR-1900DHP?). I tested this for regressions on BCM4706, BCM4708A0 and BCM47081A0. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Adrian Salido authored
[ Upstream commit 62655397 ] The driver_override implementation is susceptible to race condition when different threads are reading vs storing a different driver override. Add locking to avoid race condition. Fixes: 3d713e0e ("driver core: platform: add device binding path 'driver_override'") Cc: stable@vger.kernel.org Signed-off-by:
Adrian Salido <salidoa@google.com> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 629e014b ] Currently we just stash anything we got into file->f_flags, and the report it in fcntl(F_GETFD). This patch just clears out all unknown flags so that we don't pass them to the fs or report them. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 80f18379 ] Add a central define for all valid open flags, and use it in the uniqueness check. Signed-off-by:
-
Wanpeng Li authored
[ Upstream commit d4912215 ] WARNING: CPU: 3 PID: 2840 at arch/x86/kvm/vmx.c:10966 nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel] CPU: 3 PID: 2840 Comm: qemu-system-x86 Tainted: G OE 4.12.0-rc3+ #23 RIP: 0010:nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel] Call Trace: ? kvm_check_async_pf_completion+0xef/0x120 [kvm] ? rcu_read_lock_sched_held+0x79/0x80 vmx_queue_exception+0x104/0x160 [kvm_intel] ? vmx_queue_exception+0x104/0x160 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x1171/0x1ce0 [kvm] ? kvm_arch_vcpu_load+0x47/0x240 [kvm] ? kvm_arch_vcpu_load+0x62/0x240 [kvm] kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? __fget+0xf3/0x210 do_vfs_ioctl+0xa4/0x700 ? __fget+0x114/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x81/0x220 entry_SYSCALL64_slow_path+0x25/0x25 This is triggered occasionally by running both win7 and win2016 in L2, in addition, EPT is disabled on both L1 and L2. It can't be reproduced easily. Commit 0b6ac343 (KVM: nVMX: Correct handling of exception injection) mentioned that "KVM wants to inject page-faults which it got to the guest. This function assumes it is called with the exit reason in vmcs02 being a #PF exception". Commit e011c663 (KVM: nVMX: Check all exceptions for intercept during delivery to L2) allows to check all exceptions for intercept during delivery to L2. However, there is no guarantee the exit reason is exception currently, when there is an external interrupt occurred on host, maybe a time interrupt for host which should not be injected to guest, and somewhere queues an exception, then the function nested_vmx_check_exception() will be called and the vmexit emulation codes will try to emulate the "Acknowledge interrupt on exit" behavior, the warning is triggered. Reusing the exit reason from the L2->L0 vmexit is wrong in this case, the reason must always be EXCEPTION_NMI when injecting an exception into L1 as a nested vmexit. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Fixes: e011c663 ("KVM: nVMX: Check all exceptions for intercept during delivery to L2") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Radim Krčmář authored
[ Upstream commit f0367ee1 ] Static checker noticed that base3 could be used uninitialized if the segment was not present (useable). Random stack values probably would not pass VMCS entry checks. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 1aa36616 ("KVM: x86 emulator: consolidate segment accessors") Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit a69261e4 ] The "goto err_armclk;" error path already does a clk_put(s3c_freq->hclk); so this is a double free. Fixes: 34ee5507 ([CPUFREQ] Add S3C2416/S3C2450 cpufreq driver) Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 73dbd4a4 ] In function amd_iommu_bind_pasid(), the control flow jumps to label out_free when pasid_state->mm and mm is NULL. And mmput(mm) is called. In function mmput(mm), mm is referenced without validation. This will result in a NULL dereference bug. This patch fixes the bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Fixes: f0aac63b ('iommu/amd: Don't hold a reference to mm_struct') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
David Dillow authored
[ Upstream commit f7116e11 ] dma_pte_free_level() recurses down the IOMMU page tables and frees directory pages that are entirely contained in the given PFN range. Unfortunately, it incorrectly calculates the starting address covered by the PTE under consideration, which can lead to it clearing an entry that is still in use. This occurs if we have a scatterlist with an entry that has a length greater than 1026 MB and is aligned to 2 MB for both the IOMMU and physical addresses. For example, if __domain_mapping() is asked to map a two-entry scatterlist with 2 MB and 1028 MB segments to PFN 0xffff80000, it will ask if dma_pte_free_pagetable() is asked to PFNs from 0xffff80200 to 0xffffc05ff, it will also incorrectly clear the PFNs from 0xffff80000 to 0xffff801ff because of this issue. The current code will set level_pfn to 0xffff80200, and 0xffff80200-0xffffc01ff fits inside the range being cleared. Properly setting the level_pfn for the current level under consideration catches that this PTE is outside of the range being cleared. This patch also changes the value passed into dma_pte_free_level() when it recurses. This only affects the first PTE of the range being cleared, and is handled by the existing code that ensures we start our cursor no lower than start_pfn. This was found when using dma_map_sg() to map large chunks of contiguous memory, which immediatedly led to faults on the first access of the erroneously-deleted mappings. Fixes: 3269ee0b ("intel-iommu: Fix leaks in pagetable freeing") Reviewed-by:
Benjamin Serebrin <serebrin@google.com> Signed-off-by:
David Dillow <dillow@google.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 9e25ebfe ] The pmd containing memblock_limit is cleared by prepare_page_table() which creates the opportunity for early_alloc() to allocate unmapped memory if memblock_limit is not pmd aligned causing a boot-time hang. Commit 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") attempted to resolve this problem, but there is a path through the adjust_lowmem_bounds() routine where if all memory regions start and end on pmd-aligned addresses the memblock_limit will be set to arm_lowmem_limit. Since arm_lowmem_limit can be affected by the vmalloc early parameter, the value of arm_lowmem_limit may not be pmd-aligned. This commit corrects this oversight such that memblock_limit is always rounded down to pmd-alignment. Fixes: 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") Signed-off-by:
Doug Berger <opendmb@gmail.com> Suggested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Eric Anholt authored
[ Upstream commit fedf266f ] The bcm_kona_wdt_set_resolution_reg() call takes the spinlock, so initialize it earlier. Fixes a warning at boot with lock debugging enabled. Fixes: 6adb730d ("watchdog: bcm281xx: Watchdog Driver") Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 1e3d0c2c ] There are some missing error codes here so we accidentally return NULL instead of an error pointer. It results in a NULL pointer dereference. Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit e747f643 ] The default error code in pfkey_msg2xfrm_state() is -ENOBUFS. We added a new call to security_xfrm_state_alloc() which sets "err" to zero so there several places where we can return ERR_PTR(0) if kmalloc() fails. The caller is expecting error pointers so it leads to a NULL dereference. Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 9b3eb541 ] When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for that dst. Unfortunately, the code that allocates and fills this copy doesn't care about what type of flowi (flowi, flowi4, flowi6) gets passed. In multiple code paths (from raw_sendmsg, from TCP when replying to a FIN, in vxlan, geneve, and gre), the flowi that gets passed to xfrm is actually an on-stack flowi4, so we end up reading stuff from the stack past the end of the flowi4 struct. Since xfrm_dst->origin isn't used anywhere following commit ca116922 ("xfrm: Eliminate "fl" and "pol" args to xfrm_bundle_ok()."), just get rid of it. xfrm_dst->partner isn't used either, so get rid of that too. Fixes: 9d6ec938 ("ipv4: Use flowi4 in public route lookup interfaces.") Signed-off-by:
-
Gleb Fotengauer-Malinovskiy authored
[ Upstream commit 7292ae3d ] The latest change of asm goto support check added passing of KBUILD_CFLAGS to compiler. When these flags reference gcc plugins that are not built yet, the check fails. When one runs "make bzImage" followed by "make modules", the kernel is always built with HAVE_JUMP_LABEL disabled, while the modules are built depending on CONFIG_JUMP_LABEL. If HAVE_JUMP_LABEL macro happens to be different, modules are built with undefined references, e.g.: ERROR: "static_key_slow_inc" [net/netfilter/xt_TEE.ko] undefined! ERROR: "static_key_slow_dec" [net/netfilter/xt_TEE.ko] undefined! ERROR: "static_key_slow_dec" [net/netfilter/nft_meta.ko] undefined! ERROR: "static_key_slow_inc" [net/netfilter/nft_meta.ko] undefined! ERROR: "nf_hooks_needed" [net/netfilter/ipvs/ip_vs.ko] undefined! ERROR: "nf_hooks_needed" [net/ipv6/ipv6.ko] undefined! ERROR: "static_key_count" [net/ipv6/ipv6.ko] undefined! ERROR: "static_key_slow_inc" [net/ipv6/ipv6.ko] undefined! This change moves the check before all these references are added to KBUILD_CFLAGS. This is correct because subsequent KBUILD_CFLAGS modifications are not relevant to this check. Reported-by:
Anton V. Boyarshinov <boyarsh@altlinux.org> Fixes: 35f860f9 ("jump label: pass kbuild_cflags when checking for asm goto support") Cc: stable@vger.kernel.org # v4.10 Signed-off-by:
Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
David Lin <dtwlin@google.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 912964ea ] Commit 6f29a130 ("sctp: sctp_addr_id2transport should verify the addr before looking up assoc") invoked sctp_verify_addr to verify the addr. But it didn't check af variable beforehand, once users pass an address with family = 0 through sockopt, sctp_get_af_specific will return NULL and NULL pointer dereference will be caused by af->sockaddr_len. This patch is to fix it by returning NULL if af variable is NULL. Fixes: 6f29a130 ("sctp: sctp_addr_id2transport should verify the addr before looking up assoc") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 9577b174 ] When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's message log when (correct, normally operating) apps use SRQ LIMIT events as a trigger to post WQEs to SRQs. Add more information to the existing debug printout for SRQ_LIMIT, and output the warning messages only for the SRQ CATAS ERROR event. Fixes: acba2420 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs") Fixes: e0debf9c ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Ivan Vecera authored
[ Upstream commit fe68d8bf ] Return value from be_mcc_notify_wait() contains a base completion status together with an additional status. The base_status() macro need to be used to access base status. Fixes: e3a7ae2c be2net: Changing MAC Address of a VF was broken Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Ivan Vecera <cera@cera.cz> Signed-off-by:
-
Heiko Carstens authored
[ Upstream commit e991c24d ] We have quite a lot of code that depends on the order of the __ctl_load inline assemby and subsequent memory accesses, like e.g. disabling lowcore protection and the writing to lowcore. Since the __ctl_load macro does not have memory barrier semantics, nor any other dependencies the compiler is, theoretically, free to shuffle code around. Or in other words: storing to lowcore could happen before lowcore protection is disabled. In order to avoid this class of potential bugs simply add a full memory barrier to the __ctl_load macro. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Nikita Yushchenko authored
[ Upstream commit 602d9858 ] Some drivers do depend on page mappings to be page aligned. Swiotlb already enforces such alignment for mappings greater than page, extend that to page-sized mappings as well. Without this fix, nvme hits BUG() in nvme_setup_prps(), because that routine assumes page-aligned mappings. Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Konrad Rzeszutek Wilk <konrad@kernel.org> Signed-off-by:
-
Dave Kleikamp authored
[ Upstream commit 4d22c75d ] If the last section of a core file ends with an unmapped or zero page, the size of the file does not correspond with the last dump_skip() call. gdb complains that the file is truncated and can be confusing to users. After all of the vma sections are written, make sure that the file size is no smaller than the current file position. This problem can be demonstrated with gdb's bigcore testcase on the sparc architecture. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Tobias Klauser authored
[ Upstream commit 45382862 ] info->si_addr is of type void __user *, so it should be compared against something from the same address space. This fixes the following sparse error: arch/x86/mm/mpx.c:296:27: error: incompatible types in comparison expression (different address spaces) Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 43071d8f ] ibss and mesh modes copy the ht capabilites from the band without overriding the SMPS state. Unfortunately the default value 0 for the SMPS field means static SMPS instead of disabled. This results in HT ibss and mesh setups using only single-stream rates, even though SMPS is not supposed to be active. Initialize SMPS to disabled for all bands on ieee80211_hw_register to ensure that the value is sane where it is not overriden with the real SMPS state. Reported-by:
Elektra Wagenrad <onelektra@gmx.net> Signed-off-by:
Felix Fietkau <nbd@nbd.name> [move VHT TODO comment to a better place] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Kevin Hilman authored
[ Upstream commit c5a2a394 ] The correct error checking for dma_map_single() is to use dma_mapping_error(). Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Roberto Sassu authored
[ Upstream commit cd60be49 ] Set variables initialized in lpfc_sli4_alloc_resource_identifiers() to NULL if an error occurred. Otherwise, lpfc_sli4_driver_resource_unset() attempts to free the memory again. Signed-off-by:
Roberto Sassu <rsassu@suse.de> Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Brendan McGrath authored
[ Upstream commit a89af4ab ] Support for the Asus Touchpad was recently added. It turns out this device can fail initialisation (and become unusable) when the RESET command is sent too soon after the POWER ON command. Unfortunately the i2c-hid specification does not specify the need for a delay between these two commands. But it was discovered the Windows driver has a 1ms delay. As a result, this patch modifies the i2c-hid module to add a sleep inbetween the POWER ON and RESET commands which lasts between 1ms and 5ms. See https://github.com/vlasenko/hid-asus-dkms/issues/24 for further details. Signed-off-by:
Brendan McGrath <redmcg@redmandi.dyndns.org> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Slaby authored
[ Upstream commit ff7a28a0 ] When a system panics, the "Rebooting in X seconds.." message is never printed because it lacks a new line. Fix it. Link: http://lkml.kernel.org/r/20170119114751.2724-1-jslaby@suse.czSigned-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Balakrishnan Raman authored
[ Upstream commit efb5f68f ] Mac aging is applicable only for dynamically learnt remote mac entries. Check for user configured static remote mac entries and skip aging. Signed-off-by:
Balakrishnan Raman <ramanb@cumulusnetworks.com> Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit d0fa28f0 ] I don't have any guests with PAGE_SIZE > 64k but the code seems to be clearly broken in that case as PAGE_SIZE / MERGEABLE_BUFFER_ALIGN will need more than 8 bit and so the code in mergeable_ctx_to_buf_address does not give us the actual true size. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 4078b76c ] We need to check the return value of phy_connect_direct() in dsa_slave_phy_connect() otherwise we may be continuing the initialization of a slave network device with a PHY that already attached somewhere else and which will soon be in error because the PHY device is in error. The conditions for such an error to occur are that we have a port of our switch that is not disabled, and has the same port number as a PHY address (say both 5) that can be probed using the DSA slave MII bus. We end-up having this slave network device find a PHY at the same address as our port number, and we try to attach to it. A slave network (e.g: port 0) has already attached to our PHY device, and we try to re-attach it with a different network device, but since we ignore the error we would end-up initializating incorrect device references by the time the slave network interface is opened. The code has been (re)organized several times, making it hard to provide an exact Fixes tag, this is a bugfix nonetheless. Signed-off-by:
-
Lendacky, Thomas authored
[ Upstream commit 738f7f64 ] The xgbe_init() routine returns a return code indicating success or failure, but the return code is not checked. Add code to xgbe_init() to issue a message when failures are seen and add code to check the xgbe_init() return code. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Zach Ploskey authored
[ Upstream commit cfee5d63 ] On Ideapad laptops, ACPI event 1 is currently not handled. Many models log "ideapad_laptop: Unknown event: 1" every 20 seconds or so while running on battery power. Some convertible laptops receive this event when switching in and out of tablet mode. This adds and additional case for event 1 in ideapad_acpi_notify to call ideapad_input_report(priv, vpc_bit), so that the event is reported to userspace and we avoid unnecessary logging. Fixes bug #107481 (https://bugzilla.kernel.org/show_bug.cgi?id=107481) Fixes bug #65751 (https://bugzilla.kernel.org/show_bug.cgi?id=65751) Signed-off-by:
Zach Ploskey <zach@ploskey.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Eric Farman authored
[ Upstream commit 773c7220 ] In the case of a graceful set of detaches, where the virtio-scsi-ccw disk is removed from the guest prior to the controller, the guest behaves quite normally. Specifically, the detach gets us into sd_sync_cache to issue a Synchronize Cache(10) command, which immediately fails (and is retried a couple of times) because the device has been removed. Later, the removal of the controller sees two CRWs presented, but there's no further indication of the removal from the guest viewpoint. [ 17.217458] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 17.219257] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 21.449400] crw_info : CRW reports slct=0, oflw=0, chn=1, rsc=3, anc=0, erc=4, rsid=2 [ 21.449406] crw_info : CRW reports slct=0, oflw=0, chn=0, rsc=3, anc=0, erc=4, rsid=0 However, on s390, the SCSI disks can be removed "by surprise" when an entire controller (host) is removed and all associated disks are removed via the loop in scsi_forget_host. The same call to sd_sync_cache is made, but because the controller has already been removed, the Synchronize Cache(10) command is neither issued (and then failed) nor rejected. That the I/O isn't returned means the guest cannot have other devices added nor removed, and other tasks (such as shutdown or reboot) issued by the guest will not complete either. The virtio ring has already been marked as broken (via virtio_break_device in virtio_ccw_remove), but we still attempt to queue the command only to have it remain there. The calling sequence provides a bit of distinction for us: virtscsi_queuecommand() -> virtscsi_kick_cmd() -> virtscsi_add_cmd() -> virtqueue_add_sgs() -> virtqueue_add() if success return 0 elseif vq->broken or vring_mapping_error() return -EIO else return -ENOSPC A return of ENOSPC is generally a temporary condition, so returning "host busy" from virtscsi_queuecommand makes sense here, to have it redriven in a moment or two. But the EIO return code is more of a permanent error and so it would be wise to return the I/O itself and allow the calling thread to finish gracefully. The result is these four kernel messages in the guest (the fourth one does not occur prior to this patch): [ 22.921562] crw_info : CRW reports slct=0, oflw=0, chn=1, rsc=3, anc=0, erc=4, rsid=2 [ 22.921580] crw_info : CRW reports slct=0, oflw=0, chn=0, rsc=3, anc=0, erc=4, rsid=0 [ 22.921978] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 22.921993] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK I opted to fill in the same response data that is returned from the more graceful device detach, where the disk device is removed prior to the controller device. Signed-off-by:
Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by:
Fam Zheng <famz@redhat.com> Signed-off-by:
-
Vineeth Remanan Pillai authored
[ Upstream commit 90c311b0 ] During an OOM scenario, request slots could not be created as skb allocation fails. So the netback cannot pass in packets and netfront wrongly assumes that there is no more work to be done and it disables polling. This causes Rx to stall. The issue is with the retry logic which schedules the timer if the created slots are less than NET_RX_SLOTS_MIN. The count of new request slots to be pushed are calculated as a difference between new req_prod and rsp_cons which could be more than the actual slots, if there are unconsumed responses. The fix is to calculate the count of newly created slots as the difference between new req_prod and old req_prod. Signed-off-by:
Vineeth Remanan Pillai <vineethp@amazon.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Stefano Stabellini authored
[ Upstream commit f1225ee4 ] In xen_swiotlb_map_page and xen_swiotlb_map_sg_attrs, if the original page is not suitable, we swap it for another page from the swiotlb pool. In these cases, we don't update the previously calculated dma address for the page before calling xen_dma_map_page. Thus, we end up calling xen_dma_map_page passing the wrong dev_addr, resulting in xen_dma_map_page mistakenly assuming that the page is foreign when it is local. Fix the bug by updating dev_addr appropriately. This change has no effect on x86, because xen_dma_map_page is a stub there. Signed-off-by:
Stefano Stabellini <sstabellini@kernel.org> Signed-off-by:
Pooya Keshavarzi <Pooya.Keshavarzi@de.bosch.com> Tested-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
G. Campana authored
[ Upstream commit 8379cadf ] Using control_work instead of config_work as the 3rd argument to container_of results in an invalid portdev pointer. Indeed, the work structure is initialized as below: INIT_WORK(&portdev->config_work, &config_work_handler); It leads to a crash when portdev->vdev is dereferenced later. This bug is triggered when the guest uses a virtio-console without multiport feature and receives a config_changed virtio interrupt. Signed-off-by:
G. Campana <gcampana@quarkslab.com> Reviewed-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
-
