- 28 Sep, 2017 24 commits
-
-
Yunsheng Lin authored
The hclge_dcb module calls the interface from hclge_main/tm and provide interface for the dcb netlink interface. This patch also update Makefiles required to build the DCB supported code in HNS3 Ethernet driver and update the existing Kconfig file in the hisilicon folder. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
This patch add some interface and export some interface from hclge_tm and hclgc_main to support the upcoming DCB feature. Signed-off-by:
-
Yunsheng Lin authored
When sriov is enabled and TM is in tc-based mode, vf's TM parameters is not set in TM initialization process. This patch add the tc_based TM support for sriov enabled using the information in vport struct. Signed-off-by:
-
Yunsheng Lin authored
This patch add a tm_port_shaper cmd and set port shaper to HCLGE_ETHER_MAX_RATE on TM initialization process. Signed-off-by:
-
Yunsheng Lin authored
This patch add a pfc_pause_en cmd, and use it to configure PFC option according to fc_mode in hdev->tm_info. Signed-off-by:
-
Yunsheng Lin authored
Current buffer allocation can only happen at init, when doing buffer reallocation after init, care must be taken care of memory which priv_buf points to. This patch fixes it by using a dynamic allocated temporary memory. Because we only do buffer reallocation at init or when setting up the DCB parameter, and priv_buf is only used at buffer allocation process, so it is ok to use a dynamic allocated temporary memory. Signed-off-by:
-
Yunsheng Lin authored
This patch add support of dynamically assigning tx buffer to TC when the TC is enabled. It will save buffer for rx direction to avoid packet loss. Signed-off-by:
-
Alexey Dobriyan authored
Negative ARP header length are not a thing. Constify arguments while I'm at it. Space savings: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3) function old new delta arpt_do_table 1163 1160 -3 Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Aviad Krawczyk authored
Fix the following scenario: 1. tx_free_poll is running on cpu X 2. xmit function is running on cpu Y and fails to get sq wqe 3. tx_free_poll frees wqes on cpu X and checks the queue is not stopped 4. xmit function stops the queue after failed to get sq wqe 5. The queue is stopped forever Signed-off-by:
Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by:
-
Aviad Krawczyk authored
Set Rxq irq to specific cpu for allocating and receiving the skb from the same node. Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== bpf/verifier: disassembly improvements Fix the output of print_bpf_insn() for ALU ops that don't look like compound assignment (i.e. BPF_END and BPF_NEG). Sample output for a short test program: 0: (b4) (u32) r0 = (u32) 0 1: (dc) r0 = be32 r0 2: (84) r0 = (u32) -r0 3: (95) exit processed 4 insns, stack depth 0 ==================== Signed-off-by: -
Edward Cree authored
BPF_NEG takes only one operand, unlike the bulk of BPF_ALU[64] which are compound-assignments. So give it its own format in print_bpf_insn(). Signed-off-by:
Edward Cree <ecree@solarflare.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Edward Cree authored
print_bpf_insn() was treating all BPF_ALU[64] the same, but BPF_END has a different structure: it has a size in insn->imm (even if it's BPF_X) and uses the BPF_SRC (X or K) to indicate which endianness to use. So it needs different code to print it. Signed-off-by:
-
Colin Ian King authored
The function ch_flower_stats_cb is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warnings: symbol 'ch_flower_stats_cb' was not declared. Should it be static? Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Florian Westphal says: ==================== rtnetlink: preparation patches for further rtnl lock pushdown/removal Patches split large rtnl_fill_ifinfo into smaller chunks to better see which parts 1. require rtnl 2. do not require it at all 3. rely on rtnl locking now but could be converted Changes since v3: I dropped the 'ifalias' patch, I have a change to decouple ifalias and rtnl mutex, I will send it once this series has been merged. ==================== Signed-off-by: -
Florian Westphal authored
it can be switched to rcu. Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
Reviewed-by:
-
Florian Westphal authored
similar to earlier patches, split out more parts of this function to better see what is happening and where we assume rtnl is locked. Reviewed-by:
-
Florian Westphal authored
rtnl_fill_ifinfo currently requires caller to hold the rtnl mutex. Unfortunately the function is quite large which makes it harder to see which spots require the lock, which spots assume it and which ones could do without. Add helpers to factor out the ifindex dumping, one can use rcu to avoid rtnl dependency. Reviewed-by:
-
Florian Westphal authored
Acked-by:
-
Cong Wang authored
Instead of calling u32_lookup_ht() in a loop to find a unused handle, just switch to idr API to allocate new handles. u32 filters are special as the handle could contain a hash table id and a key id, so we need two IDR to allocate each of them. Cc: Chris Mi <chrism@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Cong Wang authored
Instead of calling basic_get() in a loop to find a unused handle, just switch to idr API to allocate new handles. Cc: Chris Mi <chrism@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Cong Wang authored
Instead of calling cls_bpf_get() in a loop to find a unused handle, just switch to idr API to allocate new handles. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Chris Mi <chrism@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Eric Dumazet authored
As measured in my prior patch ("sch_netem: faster rb tree removal"), rbtree_postorder_for_each_entry_safe() is nice looking but much slower than using rb_next() directly, except when tree is small enough to fit in CPU caches (then the cost is the same) From: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 27 Sep, 2017 16 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Add support for offloading IPv4 multicast routes Yotam says: This patch-set introduces offloading of the kernel IPv4 multicast router logic in the Spectrum driver. The first patch makes the Spectrum driver ignore FIB notifications that are not of address family IPv4 or IPv6. This is needed in order to prevent crashes while the next patches introduce the RTNL_FAMILY_IPMR FIB notifications. Patches 2-5 update ipmr to use the FIB notification chain for both MFC and VIF notifications, and patches 8-12 update the Spectrum driver to register to these notifications and offload the routes. Similarly to IPv4 and IPv6, any failure will trigger the abort mechanism which is updated in this patch-set to eject multicast route tables too. At this stage, the following limitations apply: - A multicast MFC route will be offloaded by the driver if all the output interfaces are Spectrum router interfaces (RIFs). In any other case (which includes pimreg device, tunnel devices and management ports) the route will be trapped to the CPU and the packets will be forwarded by software. - ipmr proxy routes are not supported and will trigger the abort mechanism. - The MFC TTL values are currently treated as boolean: if the value is different than 255, the traffic is forwarded to the interface and if the value is 255 it is not forwarded. Dropping packets based on their TTL isn't currently supported. To allow users to have visibility on which of the routes are offloaded and which are not, patch 6 introduces a per-route offload indication similar to IPv4 and IPv6 routes which is sent to the user via the RTNetlink interface. The Spectrum driver multicast router offloading support, which is introduced in patches 8 and 9, is divided into two parts: - The hardware logic which abstracts the Spectrum hardware and provides a simple API for the upper levels. - The offloading logic which gets the MFC and VIF notifications from the kernel and updates the hardware using the hardware logic part. Finally, the last patch makes the Spectrum router logic not ignore the multicast FIB notifications and call the corresponding functions in the multicast router offloading logic. --- v2->v3: - Move the ipmr_rule_default function definition to be inside the already existing CONFIG_IP_MROUTE_MULTIPLE_TABLES ifdef block (patch 6) - Remove double =0 initialization in spectrum_mr.c (patch 7) - Fix route4 allocation size (patch 7) v1->v2: - Add comments for struct fields in mroute.h - Take the mrt_lock while dumping VIFs in the fib_notifier dump callback - Update the MFC lastuse field too ==================== Signed-off-by: -
Yotam Gigi authored
Make the Spectrum router logic not ignore the RTNL_FAMILY_IPMR FIB notifications. Past commits added the IPMR VIF and MFC add/del notifications via the fib_notifier chain. In addition, a code for handling these notifications in the Spectrum router logic was added. Make the Spectrum router logic not ignore these notifications and forward the requests to the Spectrum multicast router offloading logic. Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Yotam Gigi authored
Due to the fact that multicast routes hold the minimum MTU of all the egress RIFs and trap packets that don't meet it, notify the mulitcast router code on RIF MTU changes. Signed-off-by:
-
Yotam Gigi authored
Add functionality for calling the multicast routing offloading logic upon MFC and VIF add and delete notifications. In addition, call the multicast routing upon RIF addition and deletion events. As the multicast routing offload logic may sleep, the actual calls are done in a deferred work. To ensure the MFC object is not freed in that interval, a reference is held to it. In case of a failure, the abort mechanism is used, which ejects all the routes from the hardware and triggers the traffic to flow through the kernel. Note: At that stage, the FIB notifications are still ignored, and will be enabled in a further patch. Signed-off-by:
-
Yotam Gigi authored
Currently, the mlxsw Spectrum driver offloads only either the RT_TABLE_MAIN FIB table or the VRF tables, so the RT_TABLE_LOCAL table is squashed to the RT_TABLE_MAIN table to allow local routes to be offloaded too. By default, multicast MFC routes which are not assigned to any user requested table are put in the RT_TABLE_DEFAULT table. Due to the fact that offloading multicast MFC routes support in Spectrum router logic is going to be introduced soon, squash the default table to MAIN too. Signed-off-by:
-
Yotam Gigi authored
Implement the multicast routing hardware API introduced in previous patch for the specific spectrum hardware. The spectrum hardware multicast routes are written using the RMFT2 register and point to an ACL flexible action set. The actions used for multicast routes are: - Counter action, which allows counting bytes and packets on multicast routes. - Multicast route action, which provide RPF check and do the actual packet duplication to a list of RIFs. - Trap action, in the case the route action specified by the called is trap. Signed-off-by:
-
Yotam Gigi authored
Add the multicast router offloading logic, which is in charge of handling the VIF and MFC notifications and translating it to the hardware logic API. The offloading logic has to overcome several obstacles in order to safely comply with the kernel multicast router user API: - It must keep track of the mapping between VIFs to netdevices. The user can add an MFC cache entry pointing to a VIF, delete the VIF and add re-add it with a different netdevice. The offloading logic has to handle this in order to be compatible with the kernel logic. - It must keep track of the mapping between netdevices to spectrum RIFs, as the current hardware implementation assume having a RIF for every port in a multicast router. - It must handle routes pointing to pimreg device to be trapped to the kernel, as the packet should be delivered to userspace. - It must handle routes pointing tunnel VIFs. The current implementation does not support multicast forwarding to tunnels, thus routes that point to a tunnel should be trapped to the kernel. - It must be aware of proxy multicast routes, which include both (*,*) routes and duplicate routes. Currently proxy routes are not offloaded and trigger the abort mechanism: removal of all routes from hardware and triggering the traffic to go through the kernel. The multicast routing offloading logic also updates the counters of the offloaded MFC routes in a periodic work. Signed-off-by:
-
Yotam Gigi authored
When the ipmr starts, it adds one default FIB rule that matches all packets and sends them to the DEFAULT (multicast) FIB table. A more complex rule can be added by user to specify that for a specific interface, a packet should be look up at either an arbitrary table or according to the l3mdev of the interface. For drivers willing to offload the ipmr logic into a hardware but don't want to offload all the FIB rules functionality, provide a function that can indicate whether the FIB rule is the default multicast rule, thus only one routing table is needed. This way, a driver can register to the FIB notification chain, get notifications about FIB rules added and trigger some kind of an internal abort mechanism when a non default rule is added by the user. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Yotam Gigi authored
Allow drivers, registered to the fib notification chain indicate whether a multicast MFC route is offloaded or not, similarly to unicast routes. The indication of whether a route is offloaded is done using the mfc_flags field on an mfc_cache struct, and the information is sent to the userspace via the RTNetlink interface only. Currently, MFC routes are either offloaded or not, thus there is no need to add per-VIF offload indication. Signed-off-by:
-
Yotam Gigi authored
Use the newly introduced notification chain to send events upon VIF and MFC addition and deletion. The MFC notifications are sent only on resolved MFC entries, as unresolved cannot be offloaded. Signed-off-by:
-
Yotam Gigi authored
Make the ipmr module register as a FIB notifier. To do that, implement both the ipmr_seq_read and ipmr_dump ops. The ipmr_seq_read op returns a sequence counter that is incremented on every notification related operation done by the ipmr. To implement that, add a sequence counter in the netns_ipv4 struct and increment it whenever a new MFC route or VIF are added or deleted. The sequence operations are protected by the RTNL lock. The ipmr_dump iterates the list of MFC routes and the list of VIF entries and sends notifications about them. The entries dump is done under RCU where the VIF dump uses the mrt_lock too, as the vif->dev field can change under RCU. Signed-off-by:
-
Yotam Gigi authored
Next commits will introduce MFC notifications through the atomic fib_notification chain, thus allowing modules to be aware of MFC entries. Due to the fact that modules may need to hold a reference to an MFC entry, add reference count to MFC entries to prevent them from being freed while these modules use them. The reference counting is done only on resolved MFC entries currently. Signed-off-by:
-
Yotam Gigi authored
In order for an interface to forward packets according to the kernel multicast routing table, it must be configured with a VIF index according to the mroute user API. The VIF index is then used to refer to that interface in the mroute user API, for example, to set the iif and oifs of an MFC entry. In order to allow drivers to be aware and offload multicast routes, they have to be aware of the VIF add and delete notifications. Due to the fact that a specific VIF can be deleted and re-added pointing to another netdevice, and the MFC routes that point to it will forward the matching packets to the new netdevice, a driver willing to offload MFC cache entries must be aware of the VIF add and delete events in addition to MFC routes notifications. Signed-off-by:
-
David S. Miller authored
Simon Horman says: ==================== nfp: flower vxlan tunnel offload John says: This patch set allows offloading of TC flower match and set tunnel fields to the NFP. The initial focus is on VXLAN traffic. Due to the current state of the NFP firmware, only VXLAN traffic on well known port 4789 is handled. The match and action fields must explicity set this value to be supported. Tunnel end point information is also offloaded to the NFP for both encapsulation and decapsulation. The NFP expects 3 separate data sets to be supplied. For decapsulation, 2 separate lists exist; a list of MAC addresses referenced by an index comprised of the port number, and a list of IP addresses. These IP addresses are not connected to a MAC or port. The MAC addresses can be written as a block or one at a time (because they have an index, previous values can be overwritten) while the IP addresses are always written as a list of all the available IPs. Because the MAC address used as a tunnel end point may be associated with a physical port or may be a virtual netdev like an OVS bridge, we do not know which addresses should be offloaded. For this reason, all MAC addresses of active netdevs are offloaded to the NFP. A notifier checks for changes to any currently offloaded MACs or any new netdevs that may occur. For IP addresses, the tunnel end point used in the rules is known as the destination IP address must be specified in the flower classifier rule. When a new IP address appears in a rule, the IP address is offloaded. The IP is removed from the offloaded list when all rules matching on that IP are deleted. For encapsulation, a next hop table is updated on the NFP that contains the source/dest IPs, MACs and egress port. These are written individually when requested. If the NFP tries to encapsulate a packet but does not know the next hop, then is sends a request to the host. The host carries out a route lookup and populates the given entry on the NFP table. A notifier also exists to check for any links changing or going down in the kernel next hop table. If an offloaded next hop entry is removed from the kernel then it is also removed on the NFP. The NFP periodically sends a message to the host telling it which tunnel ports have packets egressing the system. The host uses this information to update the used value in the neighbour entry. This means that, rather than expire when it times out, the kernel will send an ARP to check if the link is still live. From an NFP perspective, this means that valid entries will not be removed from its next hop table. ==================== Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
John Hurley authored
Periodically receive messages containing the destination IPs of tunnels that have recently forwarded traffic. Update the neighbour entries 'used' value for these IPs next hop. This prevents the neighbour entry from expiring on timeout but rather signals an ARP to verify the connection. From an NFP perspective, packets will not fall back mid-flow unless the link is verified to be down. Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
John Hurley authored
Receive a request when the NFP does not know the next hop for a packet that is to be encapsulated in a VXLAN tunnel. Do a route lookup, determine the next hop entry and update neighbour table on NFP. Monitor the kernel neighbour table for link changes and update NFP with relevant information. Overwrite routes with zero values on the NFP when they expire. Signed-off-by:
-
