- 16 Oct, 2018 40 commits
-
-
David Ahern authored
Implement kernel side filtering of routes by egress device index and table id. If the table id is given in the filter, lookup table and call mr_table_dump directly for it. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Move per-table loops from mr_rtm_dumproute to mr_table_dump and export mr_table_dump for dumps by specific table id. Signed-off-by:
-
David Ahern authored
Implement kernel side filtering of routes by egress device index and protocol. MPLS uses only a single table and route type. Signed-off-by:
-
David Ahern authored
Implement kernel side filtering of routes by table id, egress device index, protocol, and route type. If the table id is given in the filter, lookup the table and call fib6_dump_table directly for it. Move the existing route flags check for prefix only routes to the new filter. Signed-off-by:
-
David Ahern authored
Implement kernel side filtering of routes by table id, egress device index, protocol and route type. If the table id is given in the filter, lookup the table and call fib_table_dump directly for it. Signed-off-by:
-
David Ahern authored
Add struct fib_dump_filter for options on limiting which routes are returned in a dump request. The current list is table id, protocol, route type, rtm_flags and nexthop device index. struct net is needed to lookup the net_device from the index. Declare the filter for each route dump handler and plumb the new arguments from dump handlers to ip_valid_fib_dump_req. Signed-off-by:
-
David Ahern authored
With dump filtering we need a way to ensure the NLM_F_DUMP_FILTERED flag is set on a message back to the user if the data returned is influenced by some input attributes. Normally this can be done as messages are added to the skb, but if the filter results in no data being returned, the user could be confused as to why. This patch adds answer_flags to the netlink_callback allowing dump handlers to set the NLM_F_DUMP_FILTERED at a minimum in the NLMSG_DONE message ensuring the flag gets back to the user. The netlink_callback space is initialized to 0 via a memset in __netlink_dump_start, so init of the new answer_flags is covered. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-10-16 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Convert BPF sockmap and kTLS to both use a new sk_msg API and enable sk_msg BPF integration for the latter, from Daniel and John. 2) Enable BPF syscall side to indicate for maps that they do not support a map lookup operation as opposed to just missing key, from Prashant. 3) Add bpftool map create command which after map creation pins the map into bpf fs for further processing, from Jakub. 4) Add bpftool support for attaching programs to maps allowing sock_map and sock_hash to be used from bpftool, from John. 5) Improve syscall BPF map update/delete path for map-in-map types to wait a RCU grace period for pending references to complete, from Daniel. 6) Couple of follow-up fixes for the BPF socket lookup to get it enabled also when IPv6 is compiled as a module, from Joe. 7) Fix a generic-XDP bug to handle the case when the Ethernet header was mangled and thus update skb's protocol and data, from Jesper. 8) Add a missing BTF header length check between header copies from user space, from Wenwen. 9) Minor fixups in libbpf to use __u32 instead u32 types and include proper perf_event.h uapi header instead of perf internal one, from Yonghong. 10) Allow to pass user-defined flags through EXTRA_CFLAGS and EXTRA_LDFLAGS to bpftool's build, from Jiri. 11) BPF kselftest tweaks to add LWTUNNEL to config fragment and to install with_addr.sh script from flow dissector selftest, from Anders. ==================== Signed-off-by: -
Heiner Kallweit authored
After commit 9f2959b6 ("net: phy: improve handling delayed work") the sync parameter isn't needed any longer in phy_start_aneg_priv(). This allows to merge phy_start_aneg() and phy_start_aneg_priv(). Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Haiyang Zhang authored
The VF device's serial number is saved as a string in PCI slot's kobj name, not the slot->number. This patch corrects the netvsc driver, so the VF device can be successfully paired with synthetic NIC. Fixes: 00d7ddba ("hv_netvsc: pair VF based on serial number") Reported-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: second round for EDT conversion First round of EDT patches left TCP stack in a non optimal state. - High speed flows suffered from loss of performance, addressed by the first patch of this series. - Second patch brings pacing to the current state of networking, since we now reach ~100 Gbit on a single TCP flow. - Third patch implements a mitigation for scheduling delays, like the one we did in sch_fq in the past. - Fourth patch removes one special case in sch_fq for ACK packets. - Fifth patch removes a serious perfomance cost for TCP internal pacing. We should setup the high resolution timer only if really needed. - Sixth patch fixes a typo in BBR. - Last patch is one minor change in cdg congestion control. Neal Cardwell also has a patch series fixing BBR after EDT adoption. ==================== Signed-off-by: -
Eric Dumazet authored
We store in tcp socket a cache of most recent high resolution clock, there is no need to call local_clock() again, since this cache is good enough. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Neal Cardwell authored
There was a typo in this parameter name. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Eric Dumazet authored
When TCP implements its own pacing (when no fq packet scheduler is used), it is arming high resolution timer after a packet is sent. But in many cases (like TCP_RR kind of workloads), this high resolution timer expires before the application attempts to write the following packet. This overhead also happens when the flow is ACK clocked and cwnd limited instead of being limited by the pacing rate. This leads to extra overhead (high number of IRQ) Now tcp_wstamp_ns is reserved for the pacing timer only (after commit "tcp: do not change tcp_wstamp_ns in tcp_mstamp_refresh"), we can setup the timer only when a packet is about to be sent, and if tcp_wstamp_ns is in the future. This leads to a ~10% performance increase in TCP_RR workloads. Signed-off-by:
-
Eric Dumazet authored
With the new EDT model, sch_fq no longer has to special case TCP pure acks, since their skb->tstamp will allow them being sent without pacing delay. Signed-off-by:
-
Eric Dumazet authored
In commit fefa569a ("net_sched: sch_fq: account for schedule/timers drifts") we added a mitigation for scheduling jitter in fq packet scheduler. This patch does the same in TCP stack, now it is using EDT model. Note that this mitigation is valid for both external (fq packet scheduler) or internal TCP pacing. This uses the same strategy than the above commit, allowing a time credit of half the packet currently sent. Consider following case : An skb is sent, after an idle period of 300 usec. The air-time (skb->len/pacing_rate) is 500 usec Instead of setting the pacing timer to now+500 usec, it will use now+min(500/2, 300) -> now+250usec This is like having a token bucket with a depth of half an skb. Tested: tc qdisc replace dev eth0 root pfifo_fast Before netperf -P0 -H remote -- -q 1000000000 # 8000Mbit 540000 262144 262144 10.00 7710.43 After : netperf -P0 -H remote -- -q 1000000000 # 8000 Mbit 540000 262144 262144 10.00 7999.75 # Much closer to 8000Mbit target Signed-off-by:
-
Eric Dumazet authored
sk_pacing_rate has beed introduced as a u32 field in 2013, effectively limiting per flow pacing to 34Gbit. We believe it is time to allow TCP to pace high speed flows on 64bit hosts, as we now can reach 100Gbit on one TCP flow. This patch adds no cost for 32bit kernels. The tcpi_pacing_rate and tcpi_max_pacing_rate were already exported as 64bit, so iproute2/ss command require no changes. Unfortunately the SO_MAX_PACING_RATE socket option will stay 32bit and we will need to add a new option to let applications control high pacing rates. State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 1787144 10.246.9.76:49992 10.246.9.77:36741 timer:(on,003ms,0) ino:91863 sk:2 <-> skmem:(r0,rb540000,t66440,tb2363904,f605944,w1822984,o0,bl0,d0) ts sack bbr wscale:8,8 rto:201 rtt:0.057/0.006 mss:1448 rcvmss:536 advmss:1448 cwnd:138 ssthresh:178 bytes_acked:256699822585 segs_out:177279177 segs_in:3916318 data_segs_out:177279175 bbr:(bw:31276.8Mbps,mrtt:0,pacing_gain:1.25,cwnd_gain:2) send 28045.5Mbps lastrcv:73333 pacing_rate 38705.0Mbps delivery_rate 22997.6Mbps busy:73333ms unacked:135 retrans:0/157 rcv_space:14480 notsent:2085120 minrtt:0.013 Signed-off-by: -
Eric Dumazet authored
In EDT design, I made the mistake of using tcp_wstamp_ns to store the last tcp_clock_ns() sample and to store the pacing virtual timer. This causes major regressions at high speed flows. Introduce tcp_clock_cache to store last tcp_clock_ns(). This is needed because some arches have slow high-resolution kernel time service. tcp_wstamp_ns is only updated when a packet is sent. Note that we can remove tcp_mstamp in the future since tcp_mstamp is essentially tcp_clock_cache/1000, so the apparent socket size increase is temporary. Fixes: 9799ccb0 ("tcp: add tcp_wstamp_ns socket field") Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Li RongQing authored
After per-port vlan stats, vlan stats should be released when fail to add vlan Fixes: 9163a0fc ("net: bridge: add support for per-port vlan stats") CC: bridge@lists.linux-foundation.org cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
David Howells authored
Add /proc/net/rxrpc/peers to display the list of peers currently active. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Wei Yongjun authored
Add the missing unlock before return from function bsq_audit() in the error handling case. Fixes: 1d9d8be9 ("fore200e: check for dma mapping failures") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Add support for new 57500 chips. This patch-set is larger than normal because I wanted a complete series to add basic support for the new 57500 chips. The new chips have the following main differences compared to legacy chips: 1. Requires the PF driver to allocate DMA context memory as a backing store. 2. New NQ (notification queue) for interrupt events. 3. One or more CP rings can be associated with an NQ. 4. 64-bit doorbells. Most other structures and firmware APIs are compatible with legacy devices with some exceptions. For example, ring groups are no longer used and RSS table format has changed. The patch-set includes the usual firmware spec. update, some refactoring and restructuring, and adding the new code to add basic support for the new class of devices. ==================== Signed-off-by: -
Michael Chan authored
Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
Add a new poll function that polls for NQ events. If the NQ event is a CQ notification, we locate the CP ring from the cq_handle and call __bnxt_poll_work() to handle RX/TX events on the CP ring. Add a new has_more_work field in struct bnxt_cp_ring_info to indicate budget has been reached. __bnxt_poll_cqs_done() is called to update or ARM the CP rings if budget has not been reached or not. If budget has been reached, the next bnxt_poll_p5() call will continue to poll from the CQ rings directly. Otherwise, the NQ will be ARMed for the next IRQ. Signed-off-by:
-
Michael Chan authored
Separate the CP ring polling logic in bnxt_poll_work() into 2 separate functions __bnxt_poll_work() and __bnxt_poll_work_done(). Since the logic is separated, we need to add tx_pkts and events fields to struct bnxt_napi to keep track of the events to handle between the 2 functions. We also add had_work_done field to struct bnxt_cp_ring_info to indicate whether some work was performed on the CP ring. This is needed to better support the 57500 chips. We need to poll up to 2 separate CP rings before we update or ARM the CP rings on the 57500 chips. Signed-off-by:
-
Michael Chan authored
On legacy chips, the CP ring may be shared between RX and TX and so only setup the RX coalescing parameters in such a case. On 57500 chips, we always have a dedicated CP ring for TX so we can always set up the TX coalescing parameters in bnxt_hwrm_set_coal(). Also, the min_timer coalescing parameter applies to the NQ on the new chips and a separate firmware call needs to be made to set it up. Signed-off-by:
-
Michael Chan authored
In the RX code path, we current use the bnxt_napi struct pointer to identify the associated RX/CP rings. Change it to use the struct bnxt_cp_ring_info pointer instead since there are now up to 2 CP rings per MSIX. Signed-off-by:
-
Michael Chan authored
RSS context allocation and RSS indirection table setup are very different on the new chip. Refactor bnxt_setup_vnic() to call 2 different functions to set up RSS for the vnic based on chip type. On the new chip, the number of RSS contexts and the indirection table size depends on the number of RX rings. Each indirection table entry is also different on the new chip since ring groups are no longer used. Signed-off-by:
-
Michael Chan authored
On the new 57500 chips, we need to allocate one RSS context for every 64 RX rings. In previous chips, only one RSS context per vnic is required regardless of the number of RX rings. So increase the max RSS context array count to 8. Hardware ring groups are not used on the new chips. Note that the software ring group structure is still maintained in the driver to keep track of the rings associated with the vnic. Signed-off-by:
-
Michael Chan authored
On the new 57500 chips, we allocate/free one CP ring for each RX ring or TX ring separately. Using separate CP rings for RX/TX is an improvement as TX events will no longer be stuck behind RX events. Signed-off-by:
-
Michael Chan authored
Firmware ring allocation semantics are slightly different for most ring types on 57500 chips. Allocation/deallocation for NQ rings are also added for the new chips. A CP ring handle is also added so that from the NQ interrupt event, we can locate the CP ring. Signed-off-by:
-
Michael Chan authored
On the new 57500 chips, getting the associated CP ring ID associated with an RX ring or TX ring is different than before. On the legacy chips, we find the associated ring group and look up the CP ring ID. On the 57500 chips, each RX ring and TX ring has a dedicated CP ring even if they share the MSIX. Use these helper functions at appropriate places to get the CP ring ID. Signed-off-by:
-
Michael Chan authored
On 57500 chips, the original bnxt_cp_ring_info struct now refers to the NQ. bp->cp_nr_rings refer to the number of NQs on 57500 chips. There are now 2 pointers for the CP rings associated with RX and TX rings. Modify bnxt_alloc_cp_rings() and bnxt_free_cp_rings() accordingly. With multiple CP rings per NAPI, we need to add a pointer in bnxt_cp_ring_info struct to point back to the bnxt_napi struct. Signed-off-by:
-
Michael Chan authored
The ring reservation functions have to be modified for P5 chips in the following ways: - bnxt_cp_ring_info structs map to internal NQs as well as CP rings. - Ring groups are not used. - 1 CP ring must be available for each RX or TX ring. - number of RSS contexts to reserve is multiples of 64 RX rings. - RFS currently not supported. Also, RX AGG rings are only used for jumbo frames, so we need to unconditionally call bnxt_reserve_rings() in __bnxt_open_nic() to see if we need to reserve AGG rings in case MTU has changed. Signed-off-by:
-
Michael Chan authored
Store the maximum MSIX capability in PCIe config. space earlier. When we call firmware to query capability, we need to compare the PCIe MSIX max count with the firmware count and use the smaller one as the MSIX count for 57500 (P5) chips. The new chips don't use ring groups. But previous chips do and the existing logic limits the available rings based on resource calculations including ring groups. Setting the max ring groups to the max rx rings will work on the new chips without changing the existing logic. Signed-off-by:
-
Michael Chan authored
The 57500 series chips have a new 64-bit doorbell format. Use a new bnxt_db_info structure to unify the new and the old 32-bit doorbells. Add a new bnxt_set_db() function to set up the doorbell addreses and doorbell keys ahead of time. Modify and introduce new doorbell helpers to help abstract and unify the old and new doorbells. Signed-off-by:
-
Michael Chan authored
57500 series is a new chip class (P5) that requires some driver changes in the next several patches. This adds basic chip ID, doorbells, and the notification queue (NQ) structures. Each MSIX is associated with an NQ instead of a CP ring in legacy chips. Each NQ has up to 2 associated CP rings for RX and TX. The same bnxt_cp_ring_info struct will be used for the NQ. Signed-off-by:
-
Michael Chan authored
Call firmware to configure the DMA addresses of all context memory pages on new devices requiring context memory. Signed-off-by:
-
Michael Chan authored
New device requires host context memory as a backing store. Call firmware to check for context memory requirements and store the parameters. Allocate host pages accordingly. We also need to move the call bnxt_hwrm_queue_qportcfg() earlier so that all the supported hardware queues and the IDs are known before checking and allocating context memory. Signed-off-by:
-
Michael Chan authored
Newer chips require the PTU_PTE_VALID bit to be set for every page table entry for context memory and rings. Additional bits are also required for page table entries for all rings. Add a flags field to bnxt_ring_mem_info struct to specify these additional bits to be used when setting up the pages tables as needed. Signed-off-by:
-
